Commit Graph
535 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 c748aeabfa kernel: crate root follows the emboss, lip and delete-face port
assemble (records rebuilt after removing and adding faces) joins; the boolean guards that re-ran
a failed boolean with a changed tool (bore_guard, candidate_reach, sphere_lens, tangent_cylinders,
touching_walls) are gone; the lens-cut result stays as a boolean test. SMLIB_REV at the fork's
integration head with smlib_merge_faces.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 5aec7a7d1b kernel: healing through SMLib's merge of faces; the boolean retries deleted
heal: a body's faces on one surface merged and its edges on one curve joined by SMLib
(Brep::merge_faces, SmBrep::RemoveTopologicalEdgesAndVertices), the edges along its split lines
kept, with SMLib's history over the body. Its booleans already end the same way
(SmMerge::BooleanPostProcess). The truck healing is deleted with what only it did: coplanar and
collinear merges by hand, flat surfaces rebuilt as planes, and approximate edges refitted as
lines or arcs from samples. on_split_line stays; edge_points reads a record edge.

Deleted, with no port: the retries around the old boolean's failures (touching_walls,
bore_guard, tangent_cylinders, sphere_lens, tool_reseam, candidate_reach). Each re-ran a failed
boolean with a changed tool or split faces; SMLib's boolean is the one path, and a case it
fails is its defect to fix there. Their own tests go with them (the helpers' unit tests in
issue_788_tests, bore_union_tests, candidate_reach_tests, and sphere_lens' relaxed-tool test);
the #2750 lens cut's result test stays, as a boolean test, without the retry diagnostics.
Heal's tests built truck prisms and a truck spline edge: deleted.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 9f71e93e28 kernel: Delete Face with healing on the schema 4 record
The neighbours of the deleted faces are rebuilt from the body's record: each keeps its own
plane (every moved corner lies on it) and its edges away from the gap; corners on the gap move
to where the neighbouring planes meet, and the gap closes with straight edges shared between
the rebuilt faces. Moved and restored edges are recorded as pieces of the edges they replace
(assemble.rs: Assembly::piece), so the history is as before: untouched faces kept, neighbours
modified, edges kept, pieces of their edges, or where their faces meet.

Test deleted: delete_pocket_keeps_an_imported_face_around_it bowed the edges of a truck body in
place to show that a face losing only whole loops keeps its surface; a record body has no such
in-place edit, and every rebuilt face now keeps its own surface.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 ed78b82008 kernel: raising a band (lip) and its rim profile on the schema 4 record
The band is built on the body's record: the face keeps its other loop and the band's edge, the
walls rise along the face's loop (continuing the walls below) and along the band's edge
(planes along lines, cylinders along arcs), and the band's top is the face's plane moved up.
Each face is given with its outside, so no orientation is tried: the eight flips the old
construction tried in turn are gone. rim_band reads the loop's lines and arcs from the record.
History as before (the trimmed face, each wall from its loop edge, the top an offset).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 624f6d6da7 kernel: emboss on a cylinder builds on the schema 4 record; any pick on the wall is accepted
The emboss is built from the body's record: the wall's face loses the profiles' footprints,
each profile adds planar walls and its cap on the wall's cylinder at the new radius, and SMLib
builds the body from the finished record (assemble.rs: a record taken apart and finished again
in canonical order, pcurves from the record's routine for new uses, the record's own for kept
ones). surf_of and with_same_surface read the record's analytic surfaces; the topological
offset and draft that only the old kernel used are deleted (SMLib's offset faces and draft in
offset_backend replace them).

#3782: the saved pick had to lie on the half of the wall the sketch is tangent to (its angle
inside that face's span). The wall is every exterior cylindrical face of the body (a stepped or
interrupted cylinder is refused before), so the pick is checked on the cylinder between the
endcaps. The sleeve test's far-side pick now succeeds; a pick on the bore is still refused.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 9268a1e881 solidcraft-smlib: SMLib's "no change" as Error::NoEffect, the fork pinned at its integration head
The fork's shims now hold an operation SMLib reports done to having done
something (SMLIB_ERR_NO_EFFECT, -1107: a blend that made no face, a face
move or draft that moved no face). It maps to Error::NoEffect, and the
kernel says "SMLib made no change: ..." for blends and for offset, shell
and draft. Case 1080 (chamfer over openings) returned an unchanged body
as success.

The fork pin moves to 6bb2938: the chamfer side fix of the piecewise
merge, the no-effect contract, and SmStatus marked must-use with the
dropped statuses of the shims and of the fillet, boolean, offset and sweep code passed on.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 cbf28a4fd0 kernel: the prism boolean modules are gone from the crate root
The prism port deleted the second boolean route (prism_local, prism_lineage) and the planar
boolean; SMLib's boolean is the one.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 877f8acb6f kernel: the faceted boolean is SMLib's boolean with the mesh made a polyhedral solid
faceted_boolean (a body with a closed triangle mesh) faceted the body's curved faces and ran
its own BSP polygon boolean, then rebuilt a truck solid. It now builds the mesh into a
solid: each run of coplanar triangles sharing edges (corners within `tol` of each other's
planes) one planar face, its boundary chained into loops (split where a loop passes a vertex
twice, holes given to the innermost outer loop), sewn with sew_touching; SMLib's boolean
takes it with the body, whose faces stay exact. The history over [a, mesh] is the boolean's
over [a, tool] with the tool's own over the mesh substituted: each tool face from its
triangles, each tool edge the meeting of the runs either side.

Deleted with the BSP and the rebuild: planar_boolean and sliced_planar_boolean (the truck
boolean's exact fallback for touching planar faces: on SMLib the boolean is one path),
reassembled and split_beside (prism_local's), components_in_order (truck shell order) and
the tests of what no longer exists (face_planes diagnostics, the planar fallback beside a
plate's small rounds).

lib.rs (coordinator): `pub use polybool::faceted_boolean;` (planar_boolean is gone).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 42c41464aa kernel: planar regions stay one 2D arrangement; prism booleans are SMLib's boolean
The prism module kept two things: the 2D arrangement of planar regions
(planar_regions_boolean, and extrude_planar_regions, which normalises the material with it,
proves the pieces apart and extrudes them with crate::extrude, SMLib's extrusion with its
face sources), and a second route to the solid boolean: prism operands read section by
section, the result sewn and its history rebuilt from section tags (prism_boolean,
prism_union_between_caps, the stacked and free-form variants, prism_lineage.rs) and the
column-local variant (prism_local.rs). On SMLib a boolean is smlib_boolean, with SMLib's
own history: the second route is deleted, with its tests (prism_spline_tests.rs, the
stack/prism tests in planar_tests) of what no longer exists.

The section tags shrink to what the arrangement uses: the free-form segment a fitted arc
stands for. wall_along reads a record surface (cylinder, revolved line, spline net) for
clearance.rs. The 2D tests and the wall test keep their assertions.

lib.rs (coordinator): drop `mod prism_local;`.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 6a68571242 kernel: certified prism comparison reads the schema 4 record
certified_prism_equivalent proves two bodies the same uniform prism from their records
(crate::native::brep_record): caps are the planar faces square to a candidate direction,
their outward side from the shell's oriented faces, their loops run about the outward
normal and read by prism_curve; walls are planes, cylinders (their axial extent from the
face's domain), revolutions of a line or ruled spline nets, each bounded as before. The
interval arithmetic, loop matching and separation proof are unchanged. Tests build their
altered bodies by editing the record (a wall's surface swapped or moved, a cap plane's
origin moved far away) instead of truck faces, with the same assertions.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 da24f8ae29 kernel: prism curves are read off schema 4 record edges
prism_curve::segment and ::projected take a Run (a record edge's curve over its
interval, run one way, with the vertex points it must reach) instead of a truck edge.
Lines and circles are read exactly as the record holds them; a polyline as its lines; a
B-spline or NURBS curve span by span (clamped to the interval with Boehm insertion, then
split into Bezier spans), certified by the existing whole-span Bernstein proofs; an
ellipse as its exact rational quadratic spans of at most a quarter turn. segment_fitted
(arcs fitted to a spline, only the prism boolean's free-form route used it) is deleted.
The existing tests run on record curves; the part of the aliasing test that asked the
deleted prism boolean to decline is dropped.

Callers in body.rs, bore_guard.rs, sphere_lens.rs (other owners) build a Run with
prism_curve::Run::of(record, edge, forward) or Run { curve, interval, forward, ends }.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 fa3d914af6 kernel: SMLib measures mass properties at its documented 1e-4
measure_backend asked SMLib for mass properties at 1e-8, the finest its
integrator allows and below the range SmApiBrepComputeMassProperties
documents ("Relative accuracy, clamped to [1e-4, 1e-1]", SmApiQueries.h,
whose cost is "governed by dRelativeAccuracy"). The tight request was there
because the documented range did not hold on faces bounded by circles
(KNOWN_ISSUES.md); the fork's dcbb07d integrates each trim-curve knot span
on its own, and such faces now meet it (a cylinder's volume 1.8e-6 off at
1e-4). At 1e-8 SMLib's measure was most of the regression rig's time on a
modelled thread (threads/602).

The measure now asks 1e-4: ten times inside the 1e-3 it is held to (AGREE
against the mesh measure, and the rig's volume and area tolerance). NURBS
spheres and tori can still miss 1e-4 by a small factor (tangency-labs/
solidcore#384; a torus's volume 2.5e-4 at 1e-4), inside that 1e-3.
Brep::mass_properties keeps MEASURE_ACCURACY (1e-8) as its tests' default.

SMLIB_REV: the fork at dcbb07d.

Not built: base in progress (kernel-smlib/no-truck 52f25ca3 does not build).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 3ca3638c59 kernel: the curve, loop and vertex blend modules are gone from the crate root
SMLib's blend builds rolling-ball rounds, corners, loops and vertex spheres in one call; the
modules that built them on the old kernel were deleted by the blends port.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 b11433bc57 kernel: smooth display edges classified on the schema 4 record
A join is hidden when both faces are clamped Bezier B-spline surfaces swept by one
linear translation (read from the record's spline net, the face's side from its shell)
and the edge is a straight line on a ruling of both, their normals agreeing within the
certified angle, as before. The edges are the record's, in the order the mesh has them.
Tests take the record (a closed edge's equal end vertices, the ruled face by its spline
net, ruled() on record control nets); the case that bowed a truck edge in place is
removed (a record edge cannot be changed under a body).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 f860488794 kernel: the rolling-ball, corner, loop and vertex blend builders are gone
curveblend.rs (rolling-ball rounds and chamfers of curved edges, their corners, the law
and chord variants), curvecorner.rs, loopblend.rs (blends round whole face loops) and
blend_vertex.rs (a sphere at three rounded edges) built blends on truck; SMLib's blend
makes all of these in its one call, with its own corners. curvecorner_tests.rs tests
fillet and chamfer through the public functions only, so it stays, mounted from blend.rs.
curveblend_tests.rs and curveblend_law_tests.rs go with the builder: they test its
internals (fit_sections, curve_blend_with_limit, ROLLS, its NURBS surfaces and contacts).

lib.rs needs `mod curveblend;`, `mod loopblend;` and `mod blend_vertex;` removed.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 5c7381bc57 kernel: variable and chord fillets on SMLib, the taper's room on the record
fillet_variable, fillet_variable_points and fillet_variable_spline round the edge with
SMLib's variable-radius solver (smlib_fillet_variable) on any edge; fillet_chord is
SMLib's constant-chord round (smlib_blend, SMLIB_BLEND_CHORD). On a straight edge
between planar faces a radius law whose band runs past the faces at any of 256 stations
is refused as too large before SMLib runs, as before. The edge setup, the band check and
the taper's room read the body's schema 4 record: planar faces' outward normals, the
directions into them, side edges' exact tangents at the ends; a curved boundary is
divided to within the clearance for the containment test. RadiusSpline evaluates with
the geometry crate's B-spline basis.

The truck variable-radius surface builder and the rolling-ball law and chord blends are
gone. taper_mesh_tests keeps its mesh-accuracy test; its three tests of truck's mesher
on a surface with an arbitrary pole are removed (that mesher no longer exists).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 fd6fdfccef kernel: fillet_radii rounds every edge at its own radius in one SMLib blend
The corner builder (one, two or three rounds at a vertex of planar faces, taking earlier
rounds off and blending them again) is gone: SMLib's blend makes those corners itself,
with each edge's radius. The tests check through the record (curved faces' normals along
their shared edges, vertex points, planar faces' vertices on their planes). Removed: the
assertion that a concave edge meeting a convex one is refused, a limit of the deleted
builder.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 bb16707688 kernel: fillets and chamfers run on SMLib, their fit checked on the record
fillet, fillet_each, fillet_g2, chamfer and chamfer_sides blend every picked edge in one
SMLib call (smlib_blend / smlib_chamfer_sides), which builds the rounds, their tangent
chains and the corners where they meet. The #1080 fit check (blend_fit) reads the body's
schema 4 record: planar faces' outward normals, the direction into a face across a
straight edge, edge tangents at the ends. It now runs before SMLib, so a blend that runs
past its faces is TooLarge with the largest size that fits (fillet_max_each, the taper
and the doc's reduce path rely on that), and the volume and wrong-way checks after it.
fillet_max_each groups the edges by their faces and ends in the record. fillet_g2_corners
is refused: SMLib's corners are a sphere or a Coons patch, not G2.

The local truck blends, their reorder search and every truck helper they used are gone.
Tests: blend.rs's tests call fillet/chamfer instead of the deleted internal `blend`; the
assertions on the deleted quintic construction's surface and curve parameters and on
extension_fits (deleted) are removed, the analytic volumes kept.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 c29845f400 kernel: shell, offset, boolean and sweep notes say SMLib is the kernel
The module notes of offset_backend, smlib_boolean and smlib_sweeps no longer
speak of a kernel switch or another kernel's behaviour; sweep_path's tests
formatted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 e0f57ff877 kernel: extrude, revolve, primitives, lofts and sweeps on SMLib only
Every builder in build.rs keeps its signature and is SMLib's: extrude and
extrude_whole_sides (smlib_extrude), revolve and revolve_whole (smlib_revolve;
SMLib makes one face per profile segment and cap, so the two agree), the
tapered extrude (smlib_extrude's draft), loft, loft_with_rails, loft_regions
(smlib_loft, smlib_sweep_stations for rails), sweep and sweep_with
(smlib_sweep / smlib_sweep_placed, controlled ones smlib_sweep_stations). Box,
cylinder and torus are built through those, keeping their face sources and
history; sphere is SMLib's own (smlib_make_sphere), each face from the half
disc's arc as before.

Deleted: every face-by-face build (tsweep/rsweep shells, the revolve-on-axis and
touching-axis builders, poles, reseams, the healed whole revolve, the six-patch
sphere and its rotated variant, the tapered side faces, cap_and_close,
close_sweep, the full-circle sweep), and the taper's crossing pre-check and curve
splitting that only that path used (offset_crosses, offset_splits,
offset_error, offset_tolerance). Wire, loft-face and interpolation helpers other
modules still build on stay until those are ported.

(not built: base in progress; cargo check shows no error in this file)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 e96b7d6cbb kernel: solids swept along 3D point paths on SMLib only
sweep_path_with is SMLib's sweep along the path's lines (smlib_sweep_points
through sweep_with, corners mitred). Deleted: the B-spline walls fitted through
sampled stations (smooth_walls, smooth_closed_walls), the ruled walls between
stations (ruled), and the helpers only they used (rotated_wire, start_cos,
swept_volume). The open walls of chains (ruled_sheet, smooth_sheet) stay for
surfaces.rs's sheet sweeps until those are ported.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 c4bb4a3529 kernel: a cornered sweep carries on from where SMLib placed the profile
Brep::sweep_placed (smlib_sweep_placed, fork f6f428b) returns the rigid motions
carrying the profile onto the sweep's first, middle and last sections. Each run
of a path with corners now takes its end pose from the last motion (less the
straight lead-out along the end tangent) and its inside seeds from the middle
one, for every path segment kind: the 3D sketch spline next to a corner is no
longer refused. Deleted: the predicted carry along a run (carried) and
point_path::cubic_split, which only it used. SMLIB_REV at f6f428b.

Fork: build + ctest, only smlib_flat_roundtrip's known incline failure.
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 a5634078ef kernel: convex polyhedra, shell, draft and offset faces on SMLib only
convex_polyhedron builds its schema 4 record straight from the planes (corners
at triple-plane intersections, line edges, planar faces with exact line pcurves,
canonical order) and SMLib takes it (Brep::from_record, trusted) and checks it.
shell, draft and offset_faces are SMLib's local operations (smlib_shell,
smlib_draft, smlib_offset_faces through offset_backend).

Deleted: the half-space shell and draft of convex bodies, the planar-offset
cavity shells (barrel, opening overreach, opening sweep), the non-convex draft
walls, the split-piece press after a failed offset, round_all_edges and the
helpers only they used, and the test of the deleted rim pre-check
(rim_preflight_tests).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 2b77f09f86 kernel: helical sweeps and lofts to a point on SMLib only
sweep_helix is SMLib's screw sweep (smlib_screw_sweep) and loft_to_point SMLib's
loft to a point (smlib_loft_to_point), with their checks and history as before.
Deleted: the B-spline walls fitted through sampled stations (smooth_helix), the
ruled walls between stations and the face-by-face pyramid, and the Pappus
estimate only they used.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 6e17d26dd9 brep: a spline's closedness is worked out once, not on every evaluation
EvalSurface::wrap asked uv::closed whether a spline closes on itself every
time it evaluated a point outside the knot interval, and that test walks the
whole control net (its extent, then the first and last rows). A tessellation
of a closed spline unwraps its parameters across the seam, so about half its
evaluations are outside: on a coil's helical tube (thousands of control
points) the test was 80% of the tessellation's time, 30 s of the coil
command on SMLib (sweeps/3832, sweeps/793).

EvalSurface::Nurbs now carries `closed`, set by EvalSurface::nurbs from the
same test; wrap and uv::domain read it. An affine map of the surface keeps it
(closedness does not change under one). The answers are the same as before. The constructor's callers in
crates/kernel/src/tess (size.rs, surface.rs) change with it.

Not built: base in progress (rebased onto kernel-smlib/no-truck 41adb372).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 4b8edef069 kernel: the tessellator's tests plan the body's schema 4 record
The tests in tess/ build their bodies as before and plan crate::brep_record of them; the
assertions stay. Changed where what they compared is gone:
- surface.rs: each face evaluates through eval_surface and its record-parameter map as the
  record's own evaluator (SurfaceEval) evaluates it, point and natural normal over the face's
  box (was: as truck evaluates it); the kinds counted are the record's (planes and analytic
  surfaces; SMLib's primitives have no spline faces, which truck's sphere was).
- edges.rs: edges are the record's; the intersection-node test becomes: every edge between two
  curved faces puts each node, through each face's pcurve at the node's curve parameter, on that
  face's surface at the node, within the edge's tolerance (was: Newton's per-node parameters
  within 1e-7, which tess/ssi.rs no longer computes).
- tests.rs: "reference mesher" comparisons are against Body::mesh (the same mesher on the same
  record, at a finer tolerance for the cross-hole volume). Removed the assertion that
  seam::turns_more_than_once finds the thread's winding walls: that test of which mesher to use
  no longer exists.

(not built: base in progress) tess/ has no errors under cargo check --tests.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 d61efb306c kernel: a face's boundary takes its (u, v) from the record's exact pcurves
Each edge node keeps its curve parameter; each face reads its nodes' parameters from its own
pcurve of the edge at that parameter, so nothing on the boundary is projected and a seam's two
uses (each with its pcurve) are its two sides: the cases the projection could not tell apart
("boundary winds around the surface", sides that cross where projection snapped them, poles).

The record's (u, v) go to the evaluator's in closed form (tess::surface::Params): the same for
planes, splines and revolutions; (θ, v) to (−v, θ) on a cylinder's or cone's generator; on a
sphere or torus (θ, φ) to (1 − s(φ), θ), s the rational meridian's parameter, from
tan(φ'/2) running linearly over each span (φ' from the span's middle).

A pcurve that does not cover its edge's interval, or places a node farther from the edge than
ten times the chord tolerance plus the edge's own tolerance, is an error naming the face and the
edge: the record is wrong there (for an analytic face, a trim left in SMLib's internal NURBS
parameters rather than the record's would show here).

(not built: base in progress) tess/ has no errors under cargo check.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 f73b3be1a4 kernel: a 3D sketch spline path takes the SMLib sweep only
On kernel-smlib/no-truck: sweep_point_path_with goes straight to SMLib's sweep (no truck
branch), and PathSeg::flattened (truck's polyline of a path) takes no Cubic arm (the wildcard
keeps the segment).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 d1eb8b20a0 kernel: SMLib sweeps along drawn 3D sketch splines, exactly
A drawn 3D spline reached the kernel only as its sampled polyline (Wire.pts), so SMLib refused
to sweep along it ("not supported yet: SMLib sweep along a smooth path of points"). The doc
holds the spline's fit points; the curve is the centripetal Catmull-Rom spline that
fit_polyline samples. Each span of it is a cubic (Barry-Goldman), and its derivative at a fit
point depends only on that point, its neighbours and the two knot intervals, so neighbouring
spans share it: the spline is exactly one cubic Bézier per span, C1 across the spans.

- geom: catmull_rom holds the curve: samples() (fit_polyline's arithmetic, moved verbatim;
  sketch::fit_polyline now calls it) and beziers(), the exact spans; ArcLength on CurveN
  (Gauss-Legendre per knot span, Newton for the parameter at a length).
- kernel: PathSeg::Cubic, a cubic Bézier in space (the 3D counterpart of PathSeg::Curve, which
  is planar), with its arms wherever PathSeg is matched (start/end, tangents, length, point at
  a length, turn, SMLib curve as a degree-3 NURBS, halving). PointPath / PathPiece carry a path
  through 3D sketch curves: polylines as points, drawn splines as their fit points (reversed
  when the path runs them backwards); PointPath::segs gives SMLib the spans and the lines;
  sweep_point_path_with sweeps it (SMLib through sweep_with, so corners, twist, scale, rails and
  orientation take the existing routes). A smooth polyline piece (a projected or linked curve,
  which the kernel only has as points) is still refused on SMLib.
- doc: path_points builds the PointPath (a wire with three or more fit points is a spline
  piece); solid sweep and pipe call sweep_point_path_with; rails, surface sweeps and curve
  networks take its points as before.

Checked in scratch (not committed): the spans pass through every fit point and every
fit_polyline sample at its parameter (1e-12), C1 at the joints and round a closed spline;
samples() is bit-identical to the old fit_polyline over 1180 random open and closed inputs;
SMLib sweeps of a radius-2 circle along an open spline and round a closed one match
pi r^2 L (L by independent quadrature of the curve's definition) to 1e-7 and 3e-8.
sketch/wire.rs: the existing closed-spline test reads SPAN_SAMPLES from its new home.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 667cd33560 solidcraft-smlib: pcurves on B-spline faces are SMLib's own UV trims
On a B-spline face the export now takes each edgeuse's UV trim exactly as
SMLib holds it (EDGEUSE_NURBS_*): the face's parameters are SMLib's, so the
trim is the pcurve, reversed exactly (knots t -> a + b - t) where the
edgeuse runs against its edge, its knots mapped onto the edge record's
parameter where that is an affine image of SMLib's (identity for spline
edges, as_line's map for NURBS lines, the C side's map for lines), and its
end knots set to the edge interval where they differ by rounding (within
the schema's 1e-9 slack, else an error). Changed: export.rs `curves`
(per-edge TrimMap), new `trims`, `mapped`, `Face::given`,
`Edge::trim_map`, the face loop in `native_ordered`, `pcurves`,
`outer_area`.

Analytic faces and circle/ellipse edges keep brep::pcurve: SMLib keeps an
analytic face's trims on its internal rational B-spline (SmCylinder.h:
"the map from one to the other is not linear") and a circle's on its NURBS
parameter, neither an exact B-spline in the record's angle parameters.

brep::pcurve::EdgeUse gains `given`, a producer's exact pcurve taken as it
is (structure and interval checked, moved by whole periods with its loop,
never refitted). Existing construction sites (STEP reader, tests, truck
adapter) pass `given: None`; the existing tests change only for the new
field.

Built, clippy-clean and tested on 4b2c0eaf before the rebase onto
kernel-smlib/no-truck (not built: base in progress).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 8b6bfc48ca kernel: the mesher plans a schema 4 record, with no truck types
tess::plan takes a brep::Brep: faces, loops, shells' face sides and edges in the record's
order. Surfaces go to the evaluator's form from the record (planes, splines and revolutions
through SurfaceEval; a cylinder, cone, sphere or torus as the exact revolution of its line or
rational-arc generator about its axis). Edges are sampled on the record's own curve evaluator
(CurveEval), an intersection curve included, so tess/ssi.rs and the per-node parameters it
carried are gone; every boundary node's parameters come from projection.

No fallback is left in the planner's path: a curve that does not evaluate on its interval is
an error naming the edge (it was a two-point chord, or truck's evaluation); a surface the
evaluator cannot express an error naming the face and its kind. Errors name the face, its
surface kind and, for a node off the surface, the loop, node and point. The module doc states
the order: a cheaper layout where the face suits one, else constrained Delaunay in (u, v),
else an error.

MAX_ANGLE_BOUNDARY and MAX_RELAX are tess::size's own. Removed with truck: the winding test
and pole-to-pole seam test that chose between this planner and truck's mesher, and
boundaries_on_surfaces (truck blends). The tests in tess/ still build truck bodies and are
left for the record-based Body.

(not built: base in progress) tess/ has no errors under cargo check; the rest of the crate is
the no-truck branch's.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 42997a62ed WIP kernel: Body::mesh(&MeshTolerance) as the one mesher (does not build yet)
Body::mesh / mesh_plan / mesh_of and MeshTolerance (chord, display, display_of, export_of)
replace tessellate, tessellate_with, display_mesh*, display_plan*, reference_display_mesh_angular;
every caller in kernel, doc, engine, io, ui-egui, gpu and the CLI renamed mechanically; the
truck-mesher fallback, mesh_shells*, refined* removed; Body::new orients from the planner;
truck-meshalgo dropped from Cargo.toml with the tests of its hooks. Still to fix: trait imports
in tess/*, splitface/lumps/preview/step_in/boolean_record meshalgo uses, measure.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 a1ebe8df3a solidcraft-smlib: Brep::bounds, the exact box, and the fork pinned at 530ee93
Over the fork's new smlib_brep_bounds (SmBrep::CalculateTightBoundingBox): the box of a body
from its exact curves and surfaces, for measuring without a mesh on the SMLib kernel.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 69a7a85cb2 kernel: SMLib sweeps round corners and along free-form paths, lofts with holes or to a point, drafts on a foot
Through SMLib, in place of "not supported yet":
- A sweep along a path with corners: each smooth run swept on its own and
  the runs joined at each corner in a mitre (each run swept on straight past
  the corner and cut back to the plane halving it, where the next meets it
  face to face), including the corner where a closed path closes; only
  moving along the path, the runs meet on the profile. History: walls from
  their segments (found half-way along each run), caps where the path ends.
- A free-form path curve (a spline's Bézier pieces, conics) reaches the
  kernel as PathSeg::Curve, its exact piece, instead of the sketch's
  polyline of lines: SMLib sweeps along the curve itself; truck's sweeps
  flatten it as before (now the piece's own polyline within 0.01 mm, which
  turns ladder 04/004 into a pass for truck too). Patterns along a path
  flatten it and measure as before. A sweep that twists, scales or follows
  rails places its stations by length along the curve.
  (Such a controlled sweep still refuses a path with corners.)
- A loft through sections with holes: each section's outline and holes are
  one SMLib profile, the holes matched as for truck.
- A loft to a point: SMLib's pyramid (smlib_loft_to_point).
- A draft extrusion with a straight foot: the foot's prism and the drafted
  part (sloping from the foot's top to the far end the taper gives) joined
  face to face; each segment names its foot and its sloping wall.

Cases now passing on SMLib: booleans/3633, sweeps/1184, 2435, 3111, 3006,
3505, 561, 96, ladder 04/003 and 004.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 520d934fe4 kernel: SMLib sweeps that twist, scale or follow rails, railed lofts, and paths of points
On SMLib a sweep with a twist, an end scale, an orientation direction
or guide rails, and a loft with guide rails, were refused. They now
place the profile at stations by the laws the kernel already defines
for them (sweep_path::controlled_stations / railed_stations, and the
loft_rails law: plain loft between the sections moved onto the rails),
each section the profile's exact image, and SMLib skins the walls
through them (Brep::sweep_stations, Brep::loft). The path is sampled
exactly on its lines and arcs, a station per degree of turn: SMLib's
skin interpolates with free ends, its error falling as the square of
the step (a quarter-twisted square is 2e-7 off in volume at 1.4
degrees, 2e-6 at 2.8). Round a closed path the last section has to
land on the first (closing_offset, as for truck) and the ends are
joined. A railed loft needs each section's curves to pair with the
others' (same kind), else "not supported yet".

A path of points (3D sketch curves) was refused outright on SMLib; a
line or a polyline with corners is now swept as its lines (the
corner refusal still applies), and only a smooth polyline of more
points (a drawn 3D spline) stays "not supported yet".

History in the builders' vocabulary: caps from the start and end
section planes, walls from the profile segments (round a closed path,
from points inside the walls at the middle station).

Kernel cases now passing on SMLib: sweeps/1269-sweep-twisted-square-
ninety-degrees, 2005-closed-sweep-twisted-cut-inside-a-torus,
2005-closed-sweep-twisted-new-body, 201-loft-one-guide-rail-cone-
frustum, 2862-three-pipes-meeting-at-one-point, 2891-twisted-sweep-
cut-through-a-tube, 771-sweep-end-scale-cone-frustum, 771-sweep-one-
and -two-guide-rail(s)-cone-frustum.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 1336352a43 solidcraft-smlib: pin the fork at 2d7c7ed, the second round of SMLib C++ fixes
SMLIB_REV moves from 276b509 to capi-solidcraft 2d7c7ed: a fillet crash at an
unsupported corner (#453), rounds ending on a tangent seam (#418), radius laws
with a corner (#430) or that cannot be evaluated (#458), a round over a hole
(#422), a sphere's own patches kept apart (#423), offset surfaces extended the
same way whatever was evaluated first (#419), swept walls sharing their planes
(#434), the internal thread's last vertex gap (#410), shells across rounds
thinner than the wall (#397), nested shells imported in any order (#388) and
the tessellator held to its chord tolerance (#390).

Three tests follow: a radius law with a corner is now built, so the SMLib
tests check its volume (8000 - (1 - pi/4) 20 28/3) and that a law pinching to
zero inside the edge is refused; the split coil's halves now measure within
1e-5 of the closed form, so they are held to it rather than to the whole
coil's mesh, which is only within 3e-3.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 5ed1e95a48 kernel: a cut grid past the grid cap thins its lines instead of giving the face to Delaunay
A face's grid lines are thinned to MAX_FACE_GRID points (and now to at most that, where the
rounding of thin() could leave it a little over), but the cut grid adds the face's motorcycle
traces to them and then refused when its cells came out over the cap. The face fell through to
Delaunay, whose refinement budget a face of that size is far past: a split coil's wall at the
measuring tolerance got 90 000 triangles where it needs 320 000, and the halves of #793's coil
measured 1.5% short of the whole. The cut grid now thins its full lines (the same evenly spaced
choice as the face's grid, moved into grid.rs) until the cells fit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 20d4b1f4e5 kernel: a spline wall winding round an axis sends its body to the display plan for meshing
SMLib writes a modelled thread's groove walls as splines winding once per pitch, and splits the
bore or shaft into one face per turn, so no face of revolution has a loop turning more than once
and turns_more_than_once missed the body. Truck's mesher then took the winding walls: meshes
reaching 1.4 mm past the block (#1995, #2526, #3311, ladder 06/004), volumes of -1.8e7 and boxes
120 m wide (#2038 join, ladder 06/003), or spade's "!previous_region.is_empty()" assertion inside
its constrained triangulation (#3952, ladder 06/001, 06/002). A spline face now has an axis too:
the mean binormal of an iso-line that winds more than once about it, through the iso-line's
centre; a boundary loop turning more than once about that axis routes the body to the display
plan, as a helical trim on a cylinder already did.

Truck's own coils (sweep_helix's spline walls) go the same way; their walls are longer than a
grid's 1024 lines resolve at the measuring tolerance (three turns of a 20 mm coil need ~1200),
so a direction may now have 8192, the grid as a whole still capped at MAX_FACE_GRID.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 693cba4e2f kernel: a curved strip straight across and narrower than a side is its boundary nodes alone
A thread's root band that runs out through an end face (a strip a quarter pitch wide winding
ten turns, ending obliquely, so it has no four corners to blend) fell through to the butterfly
of a round face. Its cuts ran lengthwise through the strip, seeded the whole way: ~200 000
points whose triangles zigzagged along the band, six times its area and up to 1.6x the chord
tolerance off the surface. A curved face whose division across one parameter has no inner line
(straight and within a side there) and with no room for a lattice seed now skips the patch and
cut-grid layouts and goes straight to Delaunay of its boundary nodes with sag refinement:
11 600 triangles for the whole part instead of 438 000, within the tolerance, the triangles'
area matching the surface's. A fillet narrower than a side but curved across keeps its layouts
(Delaunay from its boundary alone runs out of refinement budget at fine tolerances).

cdt::has_room tells "no seed fits" apart from "the lattice is too large to look through".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 5a630daee6 tess: a hole in a closed face lies in its outer loop's period
Each loop of a face is projected on its own, so along a closed direction a
hole can come out a whole period away from the outer loop. A revolved
dome (rational spline closed in v, bounded by its rim, its seam both ways
and the pole) has its outer loop opened at the pole into v in [-1, 0],
while a hole cut by a ball next to the seam projected into [0, 1]: the
triangulation covered the hole as well, and the cut measured 48118.36 mm³
instead of SMLib's 46424.50 (tangency-labs/solidcore#433, kernel case
sweeps/3528-revolved-dome-cut-by-a-ball-on-its-seam). Every other loop is
now moved by whole periods to the copy nearest the outer loop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 22cfc69c02 solidcraft-smlib: pin the fork at 276b509, SMLib C++ fixes from solidcore
SMLIB_REV moves from e1ac3c3 to capi-solidcraft 276b509: thread groove
booleans (#435, #410), a holed profile swept along a bent path (#411), a
revolution a turn past its range (#428), shell and offset faces (#402, #380,
#403), the check linear in the body (#431), a far box that leaked (#377),
fillets and chamfers where a neighbouring round collapses (#416, #417, #420,
#379), tangent faces round a non-manifold edge (#383) and split faces of an
exact NURBS surface (#387).

The last one is why the SMLib block-and-cylinder decode test no longer finds a
spline edge on part of its curve: SMLib keeps a split face's parameterization
now. The test keeps its volume check; the decode of such edges stays covered
by spline_edges_on_part_of_their_curve_load_as_that_piece.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 d22e89bcc7 solidcraft-smlib: a solid touching itself along an edge comes back with every edge bounding two faces
An SMLib result where one shell uses an edge four or more times (a hole tangent to the outline,
touching holes, stepped cuts touching along a line) was refused as "not supported yet: a solid
touching itself along an edge". The export now reads SMLib's radial order round each edge
(EDGEUSE_NEXT_RADIAL, EDGEUSE_RADIAL_ENTRY) and the side of each face its material is on, and
gives each pair of faces across one sector its own copy of the edge: the pairs across material,
so the surface is cut apart round each wedge of material, unless one face would get two copies
(a face on both sides of the line), which SMLib's check refuses as coincident edges (tests 33,
34); then the pairs across the empty sectors, so that face keeps one edge on both sides, as
SMLib's crack edges do. The vertices at the ends stay shared: copies would give a face passing
the point twice two coincident vertices, which SMLib refuses too (test 32). Geometry unchanged;
each copy keeps its edge's tolerance and history (Order.pieces). The radial arrays are checked
as hostile input (in range, cycles on their own edge).

Tests: a hole tangent to a block's outline exports with the line copied once per wedge (each
copy joining faces on one side of it), every edge two uses, and goes back into SMLib valid at
the same volume; a blind hole tangent to a side leaves the side a crack; through SMLib both come
back as one solid with verified history and empty validity.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
bherbruckandClaude Opus 5.5 02bfd6e10d kernel: draft through SMLib
With SOLIDCRAFT_KERNEL=smlib, kernel::draft hands the picked faces (a point inside each,
from the face under each pick) to Brep::draft, with SMLib's own history: the tilted faces are
the faces themselves (Modified). Faces SMLib can't draft (a round wall, a face not parallel to
the pull) are "not supported yet", never truck. Tested in modify_history_tests: a 40 x 30 x 20
block's side at 5 degrees removes 20 x 20 tan 5 deg / 2 x 30, with its history checked against
the geometry.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:47 -04:00
Brennen HerbruckandClaude Opus 5.5 a89c67adf9 solidcraft-step: faces around a spline closed on itself get a seam
A face on a B-spline surface whose first and last control columns are the
same (closed around u), bounded by loops that go once around without a seam
edge, was refused ("a loop across a closed spline surface's seam"). It now
gets a seam as cylinders and cones do, along the surface's own boundary
column (u at the start of its knots, an exact iso-curve of the net), each
loop split where it crosses that column when it has no vertex on it; the
period is the knots' width. At a pole a loop may jump across u, where the
seam's two uses meet a period apart.

The step-conformance NURBS cylinder, dome and torus ring now read. With
SOLIDCRAFT_KERNEL=smlib all 17 parts import into SMLib with their exact
volumes and face counts. A spline closed in v only, or both ways, is still
refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:47 -04:00
bherbruckandClaude Opus 5.5 a043e4ae2d kernel: an SMLib blend's corner patch comes from the edges meeting there
SMLib leaves a corner patch where blends meet untagged, and blends() matches no single edge to
it, so it had no origin, and the edges between two blend faces (two chamfers' mitre) none
either. The history checks refused both (modify_history_tests' corner, whole-box and mitre
cases on SMLib). Now a patch without origin is made in place of all the edges of the blend
faces beside it, as truck records a corner, and every edge of a face new to the blend is where
its two faces meet.

modify_history_tests with SOLIDCRAFT_KERNEL=smlib: the three blend cases pass (28 of 30; the
painted shell and the painted box cut's pieces are the shell's and boolean's). Truck: 30 of 30.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:47 -04:00
bherbruckandClaude Opus 5.5 ae1d746ae1 kernel: chamfers with two setbacks through SMLib
With SOLIDCRAFT_KERNEL=smlib, chamfer_sides (two distances, or a distance and an angle) runs
SMLib's new unequal chamfer instead of being refused: `d1` back along the face facing up most
(down most with `flip`, as truck's chamfer_sides picks its first face), the other side by the
distance or angle, with the body's history as for the other blends. A radius law SMLib refuses
as having a corner is "not supported yet", never truck's round.

Tests (with the feature): 5 and 2 on a cube edge either way round (the top face keeps 15 or 18
of its 20, the chamfer face comes from the edge), 5 at 45 degrees, and the corner law refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:47 -04:00
bherbruckandClaude Opus 5.5 714475b84d kernel: measure through SMLib's exact mass properties, checked against the mesh
With SOLIDCRAFT_KERNEL=smlib, kernel::measure and measure_mass take volume, area and centroid
from SMLib's Brep::mass_properties (integrated on the exact surfaces, accuracy 1e-8). The mesh
measure is still made, as an independent check. Where SMLib disagrees with it beyond the mesh's
own accuracy (1e-3; tangency-labs/solidcore#384), or can't take the body, the mesh measure
stands and the measurement says why. BodyMeasure and MassMeasure carry `measured_by` (smlib |
mesh) and `notes`, and inspect.measure shows both. The box and topology counts stay the mesh's.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:47 -04:00
Brennen HerbruckandClaude Opus 5.5 5014c4f17f kernel: with SOLIDCRAFT_KERNEL=smlib, STEP solids are SMLib's bodies
Each solid item of a STEP file goes through the schema 4 reader
(solidcraft_step::topology, at the file's units and uncertainty) into
SMLib through the flat converter, healed where SMLib's check refuses it,
and comes back as a kernel body; its faces keep the file faces they came
from. A solid the reader or SMLib refuses is not imported, with the
reason: there is no truck fallback on this path. truck's own reader is
unchanged and stays the default.

Test: the 17 step-conformance parts read into SMLib with their exact
volumes and face counts, every face traced to an ADVANCED_FACE; the three
NURBS parts stay refused by the reader (a loop across a closed spline
surface's seam), as on schema 4 today.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:47 -04:00
Brennen HerbruckandClaude Opus 5.5 8fde178fe4 kernel: any schema 4 record into SMLib with its order, healed where refused
smlib_record_ordered is smlib_body_ordered for a record of any origin (a
STEP file's, not only a body's): SMLib's body of it, healed where SMLib's
check refuses it as given, with where each of SMLib's faces and edges is in
the record's order. A record SMLib refuses outright now goes through the
healer too before the import gives up.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 1d8299aedf kernel: an SMLib body keeps each edge's and vertex's tolerance through its record
SolidCraft's own record of a body SMLib made (the rig's record check, the saved body, the next
SMLib import) re-fitted every pcurve at the kernel's working tolerance, 1e-5 mm. SMLib's fillet
and chamfer surfaces lie some 2e-5 to 2e-4 mm off their faces, so 15 fillet and chamfer cases
failed that check although SMLib's own passed. And SMLib reported one tolerance for a whole body,
the largest any part of it needed, so one loose edge (a pocket cut left one at 0.23 mm) made the
whole body loose on its way back into SMLib.

Now the tolerances go per edge and per vertex, both ways:
- solidcraft-smlib reads and writes the fork's new SMLIB_FLAT_EDGE_TOLERANCE and
  VERTEX_TOLERANCE arrays. Export gives each edge and vertex record its own (never below the
  floor, which becomes the body's). Where those understate what an approximated edge needs on
  its face (SMLib holds a blend's end curve 2.3e-5 mm off its plane at 2e-5), the export falls
  back to SMLib's largest everywhere, as before. Import writes each record edge's and vertex's
  tolerance.
- `geom::brep::pcurve::EdgeUse` carries its edge record's tolerance, and a pcurve is fitted to
  it where it is larger than the face's.
- The kernel's decoded body keeps its record's edge and vertex tolerances
  (`Body::tolerances`, in its edge and vertex order) after an SMLib operation and a saved body's
  decode, and keeps them through a rigid placement. Its record writes them again; anything that
  builds a new solid drops them.

SMLIB_REV moves to the fork commit that adds the arrays (smlib-blends-abi2 4a67471, ABI 2).

Rig and ladder fillet and chamfer cases on SMLib: 43 pass before, 60 now, none lost. Tests: a
pcurve fitted to its use's own tolerance, and the ladder's 08/006 cylinder rim chamfer whose
record, saved body and placed copy all stay valid and SMLib's check takes back.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:47 -04:00