Commit Graph
2811 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 c748aeabfa kernel: crate root follows the emboss, lip and delete-face port
assemble (records rebuilt after removing and adding faces) joins; the boolean guards that re-ran
a failed boolean with a changed tool (bore_guard, candidate_reach, sphere_lens, tangent_cylinders,
touching_walls) are gone; the lens-cut result stays as a boolean test. SMLIB_REV at the fork's
integration head with smlib_merge_faces.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 5aec7a7d1b kernel: healing through SMLib's merge of faces; the boolean retries deleted
heal: a body's faces on one surface merged and its edges on one curve joined by SMLib
(Brep::merge_faces, SmBrep::RemoveTopologicalEdgesAndVertices), the edges along its split lines
kept, with SMLib's history over the body. Its booleans already end the same way
(SmMerge::BooleanPostProcess). The truck healing is deleted with what only it did: coplanar and
collinear merges by hand, flat surfaces rebuilt as planes, and approximate edges refitted as
lines or arcs from samples. on_split_line stays; edge_points reads a record edge.

Deleted, with no port: the retries around the old boolean's failures (touching_walls,
bore_guard, tangent_cylinders, sphere_lens, tool_reseam, candidate_reach). Each re-ran a failed
boolean with a changed tool or split faces; SMLib's boolean is the one path, and a case it
fails is its defect to fix there. Their own tests go with them (the helpers' unit tests in
issue_788_tests, bore_union_tests, candidate_reach_tests, and sphere_lens' relaxed-tool test);
the #2750 lens cut's result test stays, as a boolean test, without the retry diagnostics.
Heal's tests built truck prisms and a truck spline edge: deleted.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 3bd1cc5349 solidcraft-smlib: Brep::merge_faces, SMLib's removal of topological edges and vertices
The wrapper of the fork's smlib_merge_faces (SmBrep::RemoveTopologicalEdgesAndVertices): faces
on one surface meeting along an edge become one, edges on one curve meeting at a vertex nothing
else uses become one, and the edges under the given points stay. SMLIB_REV moves to the fork
commit that adds it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 9f71e93e28 kernel: Delete Face with healing on the schema 4 record
The neighbours of the deleted faces are rebuilt from the body's record: each keeps its own
plane (every moved corner lies on it) and its edges away from the gap; corners on the gap move
to where the neighbouring planes meet, and the gap closes with straight edges shared between
the rebuilt faces. Moved and restored edges are recorded as pieces of the edges they replace
(assemble.rs: Assembly::piece), so the history is as before: untouched faces kept, neighbours
modified, edges kept, pieces of their edges, or where their faces meet.

Test deleted: delete_pocket_keeps_an_imported_face_around_it bowed the edges of a truck body in
place to show that a face losing only whole loops keeps its surface; a record body has no such
in-place edit, and every rebuilt face now keeps its own surface.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 ed78b82008 kernel: raising a band (lip) and its rim profile on the schema 4 record
The band is built on the body's record: the face keeps its other loop and the band's edge, the
walls rise along the face's loop (continuing the walls below) and along the band's edge
(planes along lines, cylinders along arcs), and the band's top is the face's plane moved up.
Each face is given with its outside, so no orientation is tried: the eight flips the old
construction tried in turn are gone. rim_band reads the loop's lines and arcs from the record.
History as before (the trimmed face, each wall from its loop edge, the top an offset).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 624f6d6da7 kernel: emboss on a cylinder builds on the schema 4 record; any pick on the wall is accepted
The emboss is built from the body's record: the wall's face loses the profiles' footprints,
each profile adds planar walls and its cap on the wall's cylinder at the new radius, and SMLib
builds the body from the finished record (assemble.rs: a record taken apart and finished again
in canonical order, pcurves from the record's routine for new uses, the record's own for kept
ones). surf_of and with_same_surface read the record's analytic surfaces; the topological
offset and draft that only the old kernel used are deleted (SMLib's offset faces and draft in
offset_backend replace them).

#3782: the saved pick had to lie on the half of the wall the sketch is tangent to (its angle
inside that face's span). The wall is every exterior cylindrical face of the body (a stepped or
interrupted cylinder is refused before), so the pick is checked on the cylinder between the
endcaps. The sleeve test's far-side pick now succeeds; a pick on the bore is still refused.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 a46874f89d brep: part of a record, a material region with its voids, in canonical order
A lump of a body is the part of one of its material regions: its outer shell, its open and wire
shells and a void for each closed inner shell, renumbered in the record's canonical order, with
the source index of each face, edge and vertex for history. Islands inside those voids are parts
of their own. Read from the regions the record already holds, with no mesh or ray test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 9268a1e881 solidcraft-smlib: SMLib's "no change" as Error::NoEffect, the fork pinned at its integration head
The fork's shims now hold an operation SMLib reports done to having done
something (SMLIB_ERR_NO_EFFECT, -1107: a blend that made no face, a face
move or draft that moved no face). It maps to Error::NoEffect, and the
kernel says "SMLib made no change: ..." for blends and for offset, shell
and draft. Case 1080 (chamfer over openings) returned an unchanged body
as success.

The fork pin moves to 6bb2938: the chamfer side fix of the piecewise
merge, the no-effect contract, and SmStatus marked must-use with the
dropped statuses of the shims and of the fillet, boolean, offset and sweep code passed on.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 cbf28a4fd0 kernel: the prism boolean modules are gone from the crate root
The prism port deleted the second boolean route (prism_local, prism_lineage) and the planar
boolean; SMLib's boolean is the one.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 877f8acb6f kernel: the faceted boolean is SMLib's boolean with the mesh made a polyhedral solid
faceted_boolean (a body with a closed triangle mesh) faceted the body's curved faces and ran
its own BSP polygon boolean, then rebuilt a truck solid. It now builds the mesh into a
solid: each run of coplanar triangles sharing edges (corners within `tol` of each other's
planes) one planar face, its boundary chained into loops (split where a loop passes a vertex
twice, holes given to the innermost outer loop), sewn with sew_touching; SMLib's boolean
takes it with the body, whose faces stay exact. The history over [a, mesh] is the boolean's
over [a, tool] with the tool's own over the mesh substituted: each tool face from its
triangles, each tool edge the meeting of the runs either side.

Deleted with the BSP and the rebuild: planar_boolean and sliced_planar_boolean (the truck
boolean's exact fallback for touching planar faces: on SMLib the boolean is one path),
reassembled and split_beside (prism_local's), components_in_order (truck shell order) and
the tests of what no longer exists (face_planes diagnostics, the planar fallback beside a
plate's small rounds).

lib.rs (coordinator): `pub use polybool::faceted_boolean;` (planar_boolean is gone).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 42c41464aa kernel: planar regions stay one 2D arrangement; prism booleans are SMLib's boolean
The prism module kept two things: the 2D arrangement of planar regions
(planar_regions_boolean, and extrude_planar_regions, which normalises the material with it,
proves the pieces apart and extrudes them with crate::extrude, SMLib's extrusion with its
face sources), and a second route to the solid boolean: prism operands read section by
section, the result sewn and its history rebuilt from section tags (prism_boolean,
prism_union_between_caps, the stacked and free-form variants, prism_lineage.rs) and the
column-local variant (prism_local.rs). On SMLib a boolean is smlib_boolean, with SMLib's
own history: the second route is deleted, with its tests (prism_spline_tests.rs, the
stack/prism tests in planar_tests) of what no longer exists.

The section tags shrink to what the arrangement uses: the free-form segment a fitted arc
stands for. wall_along reads a record surface (cylinder, revolved line, spline net) for
clearance.rs. The 2D tests and the wall test keep their assertions.

lib.rs (coordinator): drop `mod prism_local;`.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 6a68571242 kernel: certified prism comparison reads the schema 4 record
certified_prism_equivalent proves two bodies the same uniform prism from their records
(crate::native::brep_record): caps are the planar faces square to a candidate direction,
their outward side from the shell's oriented faces, their loops run about the outward
normal and read by prism_curve; walls are planes, cylinders (their axial extent from the
face's domain), revolutions of a line or ruled spline nets, each bounded as before. The
interval arithmetic, loop matching and separation proof are unchanged. Tests build their
altered bodies by editing the record (a wall's surface swapped or moved, a cap plane's
origin moved far away) instead of truck faces, with the same assertions.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 da24f8ae29 kernel: prism curves are read off schema 4 record edges
prism_curve::segment and ::projected take a Run (a record edge's curve over its
interval, run one way, with the vertex points it must reach) instead of a truck edge.
Lines and circles are read exactly as the record holds them; a polyline as its lines; a
B-spline or NURBS curve span by span (clamped to the interval with Boehm insertion, then
split into Bezier spans), certified by the existing whole-span Bernstein proofs; an
ellipse as its exact rational quadratic spans of at most a quarter turn. segment_fitted
(arcs fitted to a spline, only the prism boolean's free-form route used it) is deleted.
The existing tests run on record curves; the part of the aliasing test that asked the
deleted prism boolean to decline is dropped.

Callers in body.rs, bore_guard.rs, sphere_lens.rs (other owners) build a Run with
prism_curve::Run::of(record, edge, forward) or Run { curve, interval, forward, ends }.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 fa3d914af6 kernel: SMLib measures mass properties at its documented 1e-4
measure_backend asked SMLib for mass properties at 1e-8, the finest its
integrator allows and below the range SmApiBrepComputeMassProperties
documents ("Relative accuracy, clamped to [1e-4, 1e-1]", SmApiQueries.h,
whose cost is "governed by dRelativeAccuracy"). The tight request was there
because the documented range did not hold on faces bounded by circles
(KNOWN_ISSUES.md); the fork's dcbb07d integrates each trim-curve knot span
on its own, and such faces now meet it (a cylinder's volume 1.8e-6 off at
1e-4). At 1e-8 SMLib's measure was most of the regression rig's time on a
modelled thread (threads/602).

The measure now asks 1e-4: ten times inside the 1e-3 it is held to (AGREE
against the mesh measure, and the rig's volume and area tolerance). NURBS
spheres and tori can still miss 1e-4 by a small factor (tangency-labs/
solidcore#384; a torus's volume 2.5e-4 at 1e-4), inside that 1e-3.
Brep::mass_properties keeps MEASURE_ACCURACY (1e-8) as its tests' default.

SMLIB_REV: the fork at dcbb07d.

Not built: base in progress (kernel-smlib/no-truck 52f25ca3 does not build).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 b0cc84b287 brep: a record moved rigidly, exactly
A rotation and a translation move every point, axis and control point and leave parameters,
pcurves, tolerances, orientation and the canonical order as they are: the same B-rep in other
coordinates. Placing a body (assembly instances, patterns) no longer needs a kernel round trip.
Reflections and scalings change parameters or geometry kinds and go to the kernel.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 3ca3638c59 kernel: the curve, loop and vertex blend modules are gone from the crate root
SMLib's blend builds rolling-ball rounds, corners, loops and vertex spheres in one call; the
modules that built them on the old kernel were deleted by the blends port.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 b11433bc57 kernel: smooth display edges classified on the schema 4 record
A join is hidden when both faces are clamped Bezier B-spline surfaces swept by one
linear translation (read from the record's spline net, the face's side from its shell)
and the edge is a straight line on a ruling of both, their normals agreeing within the
certified angle, as before. The edges are the record's, in the order the mesh has them.
Tests take the record (a closed edge's equal end vertices, the ruled face by its spline
net, ruled() on record control nets); the case that bowed a truck edge in place is
removed (a record edge cannot be changed under a body).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 f860488794 kernel: the rolling-ball, corner, loop and vertex blend builders are gone
curveblend.rs (rolling-ball rounds and chamfers of curved edges, their corners, the law
and chord variants), curvecorner.rs, loopblend.rs (blends round whole face loops) and
blend_vertex.rs (a sphere at three rounded edges) built blends on truck; SMLib's blend
makes all of these in its one call, with its own corners. curvecorner_tests.rs tests
fillet and chamfer through the public functions only, so it stays, mounted from blend.rs.
curveblend_tests.rs and curveblend_law_tests.rs go with the builder: they test its
internals (fit_sections, curve_blend_with_limit, ROLLS, its NURBS surfaces and contacts).

lib.rs needs `mod curveblend;`, `mod loopblend;` and `mod blend_vertex;` removed.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 5c7381bc57 kernel: variable and chord fillets on SMLib, the taper's room on the record
fillet_variable, fillet_variable_points and fillet_variable_spline round the edge with
SMLib's variable-radius solver (smlib_fillet_variable) on any edge; fillet_chord is
SMLib's constant-chord round (smlib_blend, SMLIB_BLEND_CHORD). On a straight edge
between planar faces a radius law whose band runs past the faces at any of 256 stations
is refused as too large before SMLib runs, as before. The edge setup, the band check and
the taper's room read the body's schema 4 record: planar faces' outward normals, the
directions into them, side edges' exact tangents at the ends; a curved boundary is
divided to within the clearance for the containment test. RadiusSpline evaluates with
the geometry crate's B-spline basis.

The truck variable-radius surface builder and the rolling-ball law and chord blends are
gone. taper_mesh_tests keeps its mesh-accuracy test; its three tests of truck's mesher
on a surface with an arbitrary pole are removed (that mesher no longer exists).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 fd6fdfccef kernel: fillet_radii rounds every edge at its own radius in one SMLib blend
The corner builder (one, two or three rounds at a vertex of planar faces, taking earlier
rounds off and blending them again) is gone: SMLib's blend makes those corners itself,
with each edge's radius. The tests check through the record (curved faces' normals along
their shared edges, vertex points, planar faces' vertices on their planes). Removed: the
assertion that a concave edge meeting a convex one is refused, a limit of the deleted
builder.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 bb16707688 kernel: fillets and chamfers run on SMLib, their fit checked on the record
fillet, fillet_each, fillet_g2, chamfer and chamfer_sides blend every picked edge in one
SMLib call (smlib_blend / smlib_chamfer_sides), which builds the rounds, their tangent
chains and the corners where they meet. The #1080 fit check (blend_fit) reads the body's
schema 4 record: planar faces' outward normals, the direction into a face across a
straight edge, edge tangents at the ends. It now runs before SMLib, so a blend that runs
past its faces is TooLarge with the largest size that fits (fillet_max_each, the taper
and the doc's reduce path rely on that), and the volume and wrong-way checks after it.
fillet_max_each groups the edges by their faces and ends in the record. fillet_g2_corners
is refused: SMLib's corners are a sphere or a Coons patch, not G2.

The local truck blends, their reorder search and every truck helper they used are gone.
Tests: blend.rs's tests call fillet/chamfer instead of the deleted internal `blend`; the
assertions on the deleted quintic construction's surface and curve parameters and on
extension_fits (deleted) are removed, the analytic volumes kept.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 c29845f400 kernel: shell, offset, boolean and sweep notes say SMLib is the kernel
The module notes of offset_backend, smlib_boolean and smlib_sweeps no longer
speak of a kernel switch or another kernel's behaviour; sweep_path's tests
formatted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 e0f57ff877 kernel: extrude, revolve, primitives, lofts and sweeps on SMLib only
Every builder in build.rs keeps its signature and is SMLib's: extrude and
extrude_whole_sides (smlib_extrude), revolve and revolve_whole (smlib_revolve;
SMLib makes one face per profile segment and cap, so the two agree), the
tapered extrude (smlib_extrude's draft), loft, loft_with_rails, loft_regions
(smlib_loft, smlib_sweep_stations for rails), sweep and sweep_with
(smlib_sweep / smlib_sweep_placed, controlled ones smlib_sweep_stations). Box,
cylinder and torus are built through those, keeping their face sources and
history; sphere is SMLib's own (smlib_make_sphere), each face from the half
disc's arc as before.

Deleted: every face-by-face build (tsweep/rsweep shells, the revolve-on-axis and
touching-axis builders, poles, reseams, the healed whole revolve, the six-patch
sphere and its rotated variant, the tapered side faces, cap_and_close,
close_sweep, the full-circle sweep), and the taper's crossing pre-check and curve
splitting that only that path used (offset_crosses, offset_splits,
offset_error, offset_tolerance). Wire, loft-face and interpolation helpers other
modules still build on stay until those are ported.

(not built: base in progress; cargo check shows no error in this file)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 e96b7d6cbb kernel: solids swept along 3D point paths on SMLib only
sweep_path_with is SMLib's sweep along the path's lines (smlib_sweep_points
through sweep_with, corners mitred). Deleted: the B-spline walls fitted through
sampled stations (smooth_walls, smooth_closed_walls), the ruled walls between
stations (ruled), and the helpers only they used (rotated_wire, start_cos,
swept_volume). The open walls of chains (ruled_sheet, smooth_sheet) stay for
surfaces.rs's sheet sweeps until those are ported.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 c4bb4a3529 kernel: a cornered sweep carries on from where SMLib placed the profile
Brep::sweep_placed (smlib_sweep_placed, fork f6f428b) returns the rigid motions
carrying the profile onto the sweep's first, middle and last sections. Each run
of a path with corners now takes its end pose from the last motion (less the
straight lead-out along the end tangent) and its inside seeds from the middle
one, for every path segment kind: the 3D sketch spline next to a corner is no
longer refused. Deleted: the predicted carry along a run (carried) and
point_path::cubic_split, which only it used. SMLIB_REV at f6f428b.

Fork: build + ctest, only smlib_flat_roundtrip's known incline failure.
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 a5634078ef kernel: convex polyhedra, shell, draft and offset faces on SMLib only
convex_polyhedron builds its schema 4 record straight from the planes (corners
at triple-plane intersections, line edges, planar faces with exact line pcurves,
canonical order) and SMLib takes it (Brep::from_record, trusted) and checks it.
shell, draft and offset_faces are SMLib's local operations (smlib_shell,
smlib_draft, smlib_offset_faces through offset_backend).

Deleted: the half-space shell and draft of convex bodies, the planar-offset
cavity shells (barrel, opening overreach, opening sweep), the non-convex draft
walls, the split-piece press after a failed offset, round_all_edges and the
helpers only they used, and the test of the deleted rim pre-check
(rim_preflight_tests).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 2b77f09f86 kernel: helical sweeps and lofts to a point on SMLib only
sweep_helix is SMLib's screw sweep (smlib_screw_sweep) and loft_to_point SMLib's
loft to a point (smlib_loft_to_point), with their checks and history as before.
Deleted: the B-spline walls fitted through sampled stations (smooth_helix), the
ruled walls between stations and the face-by-face pyramid, and the Pappus
estimate only they used.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 2d3d0a081b kernel-cases: a join that meets nothing keeps the tool as a lump (#2896)
The case expected two bodies for a combine join of an arm 0.01 mm clear of a
ring. A join's tool that meets no target goes into the target as a separate
lump and the tool body is consumed (doc eval Operation::Join; the engine test
join_meeting_nothing_keeps_the_first_body): one body, Ring, of two shells,
with the volumes' sum. The case's point, nothing fuses, is kept: shells 2 and
the summed volume.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 f10dfd8d06 kernel-cases: crossing equal holes leave each wall in two faces
ladder/05/011 expected 8 faces (the stock's 6 and one per hole). With equal
radii the two walls cross along two ellipses that meet at the two points
where the walls are tangent (x = 25 and 35, y = 20, z = 10), so each wall is
left in two pieces that touch only at those points, with no edge between
them: separate faces, 10 in all. SMLib makes those 10 (volume exact); truck's
8 came with an invalid record. Derivation in the case's method.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 5df8a55657 engine: an extrude Join, Cut or Intersect leaves hidden bodies alone (#2464)
With no targets picked, an extrude's Join, Cut or Intersect changed every body
of the active component it met, shown or hidden: a hidden coincident copy was
joined in and disappeared. Where some bodies of the active component are
hidden, the shown ones become the feature's participants, kept with it, so
showing or hiding bodies later doesn't change the model. Explicit targets and
participants, and a face's or a face sketch's own body, still win.

Test: the issue's plate with a hidden copy and a rim joined on.

Main reached the same fix for Cut and Intersect in #3961 (its targets-based
shown_scope in extrude); this one, which also covers Join and keeps the shown
bodies as participants, replaces it. Its test stays.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 386b1d123f doc: a sweep round a closed path starts where the profile is (#3345)
A closed path was always followed from the start of its first picked curve,
wherever the profile stood on it. A profile drawn at the middle of a line was
then carried round the path standing off it by the distance between the two
(walls offset, the rounds turned the wrong way, on both kernels). Now the
closed chain begins where the profile's plane crosses it nearest the profile,
the curve there split in two (or at the joint there); open paths and paths
that already start on the profile's plane are unchanged.

Test: a 4 x 3 profile at the middle of the bottom line of a rounded rectangle
swept round it: Pappus volume and the tube within 2 mm of the path.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 ba99405e2f doc: a pattern or mirror of a pattern or mirror copies what that one made
Replaying a Mirror or Pattern feature asked it for its tools, which only primitives
and sketch features have: 'Mirror1 cannot be patterned or mirrored yet' (#3652). A
copy of a pattern or mirror of features now replays that feature's own features with
its moves followed by these (a mirror of Mirror1 reflects the hole Mirror1 made),
nested at most 8 deep, never through itself, and to at most MAX_INSTANCES copies in all.
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 85da7d6c2b engine: count a face pick's work as it is done
Face capture estimated its work as every face times every triangle and refused a
body past 2M (#3914, a threaded block: 'face capture work limit exceeded'), though
only planar faces through the point scan the mesh. Each such scan is now counted
when made.
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 f71cb3d991 engine: revolve about a construction axis given by name
solid.revolve and surface.revolve took any other axis string as a sketch line id,
so a construction axis by name failed with 'unknown sketch line' (#2516). A name
that is no line of the profile's sketch and names a construction axis is that
axis where it is now, as picking it in the view already passes it ({origin, dir}).
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 51d7fc4137 kernel: IGES trimmed surfaces close their loops and split into separate bodies
Three defects in restating trimmed surfaces (144/143) as STEP, kernel-agnostic:

- A boundary loop is one closed curve (IGES 5.3 composite curve: each piece ends
  where the next starts), but each piece's ends were sewn into vertices by
  distance alone, so pieces that miss by more than the sewing tolerance left the
  loop open and the face was dropped (#3845). Surfaces are now read first and sewn
  after: every meeting point of two pieces is one vertex (union of the two), the
  STEP reader then carries the distance as the vertex's tolerance.
- With no parameter-space curve to give the start, a composite whose first piece is
  written end to start kept that direction, so the second piece did not connect
  (#3913). The first piece now runs from its end away from the second.
- All sewn surfaces were written as one shell, so two separate closed boxes came in
  as one body of two shells that SMLib's check refuses (#3972). Each connected set
  of faces is now its own shell and body (Body1, Body2, ...); a shell writes only
  the vertices its edges use, in the sewer's order.
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 6e17d26dd9 brep: a spline's closedness is worked out once, not on every evaluation
EvalSurface::wrap asked uv::closed whether a spline closes on itself every
time it evaluated a point outside the knot interval, and that test walks the
whole control net (its extent, then the first and last rows). A tessellation
of a closed spline unwraps its parameters across the seam, so about half its
evaluations are outside: on a coil's helical tube (thousands of control
points) the test was 80% of the tessellation's time, 30 s of the coil
command on SMLib (sweeps/3832, sweeps/793).

EvalSurface::Nurbs now carries `closed`, set by EvalSurface::nurbs from the
same test; wrap and uv::domain read it. An affine map of the surface keeps it
(closedness does not change under one). The answers are the same as before. The constructor's callers in
crates/kernel/src/tess (size.rs, surface.rs) change with it.

Not built: base in progress (rebased onto kernel-smlib/no-truck 41adb372).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 4b8edef069 kernel: the tessellator's tests plan the body's schema 4 record
The tests in tess/ build their bodies as before and plan crate::brep_record of them; the
assertions stay. Changed where what they compared is gone:
- surface.rs: each face evaluates through eval_surface and its record-parameter map as the
  record's own evaluator (SurfaceEval) evaluates it, point and natural normal over the face's
  box (was: as truck evaluates it); the kinds counted are the record's (planes and analytic
  surfaces; SMLib's primitives have no spline faces, which truck's sphere was).
- edges.rs: edges are the record's; the intersection-node test becomes: every edge between two
  curved faces puts each node, through each face's pcurve at the node's curve parameter, on that
  face's surface at the node, within the edge's tolerance (was: Newton's per-node parameters
  within 1e-7, which tess/ssi.rs no longer computes).
- tests.rs: "reference mesher" comparisons are against Body::mesh (the same mesher on the same
  record, at a finer tolerance for the cross-hole volume). Removed the assertion that
  seam::turns_more_than_once finds the thread's winding walls: that test of which mesher to use
  no longer exists.

(not built: base in progress) tess/ has no errors under cargo check --tests.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 d61efb306c kernel: a face's boundary takes its (u, v) from the record's exact pcurves
Each edge node keeps its curve parameter; each face reads its nodes' parameters from its own
pcurve of the edge at that parameter, so nothing on the boundary is projected and a seam's two
uses (each with its pcurve) are its two sides: the cases the projection could not tell apart
("boundary winds around the surface", sides that cross where projection snapped them, poles).

The record's (u, v) go to the evaluator's in closed form (tess::surface::Params): the same for
planes, splines and revolutions; (θ, v) to (−v, θ) on a cylinder's or cone's generator; on a
sphere or torus (θ, φ) to (1 − s(φ), θ), s the rational meridian's parameter, from
tan(φ'/2) running linearly over each span (φ' from the span's middle).

A pcurve that does not cover its edge's interval, or places a node farther from the edge than
ten times the chord tolerance plus the edge's own tolerance, is an error naming the face and the
edge: the record is wrong there (for an analytic face, a trim left in SMLib's internal NURBS
parameters rather than the record's would show here).

(not built: base in progress) tess/ has no errors under cargo check.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 f73b3be1a4 kernel: a 3D sketch spline path takes the SMLib sweep only
On kernel-smlib/no-truck: sweep_point_path_with goes straight to SMLib's sweep (no truck
branch), and PathSeg::flattened (truck's polyline of a path) takes no Cubic arm (the wildcard
keeps the segment).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 d1eb8b20a0 kernel: SMLib sweeps along drawn 3D sketch splines, exactly
A drawn 3D spline reached the kernel only as its sampled polyline (Wire.pts), so SMLib refused
to sweep along it ("not supported yet: SMLib sweep along a smooth path of points"). The doc
holds the spline's fit points; the curve is the centripetal Catmull-Rom spline that
fit_polyline samples. Each span of it is a cubic (Barry-Goldman), and its derivative at a fit
point depends only on that point, its neighbours and the two knot intervals, so neighbouring
spans share it: the spline is exactly one cubic Bézier per span, C1 across the spans.

- geom: catmull_rom holds the curve: samples() (fit_polyline's arithmetic, moved verbatim;
  sketch::fit_polyline now calls it) and beziers(), the exact spans; ArcLength on CurveN
  (Gauss-Legendre per knot span, Newton for the parameter at a length).
- kernel: PathSeg::Cubic, a cubic Bézier in space (the 3D counterpart of PathSeg::Curve, which
  is planar), with its arms wherever PathSeg is matched (start/end, tangents, length, point at
  a length, turn, SMLib curve as a degree-3 NURBS, halving). PointPath / PathPiece carry a path
  through 3D sketch curves: polylines as points, drawn splines as their fit points (reversed
  when the path runs them backwards); PointPath::segs gives SMLib the spans and the lines;
  sweep_point_path_with sweeps it (SMLib through sweep_with, so corners, twist, scale, rails and
  orientation take the existing routes). A smooth polyline piece (a projected or linked curve,
  which the kernel only has as points) is still refused on SMLib.
- doc: path_points builds the PointPath (a wire with three or more fit points is a spline
  piece); solid sweep and pipe call sweep_point_path_with; rails, surface sweeps and curve
  networks take its points as before.

Checked in scratch (not committed): the spans pass through every fit point and every
fit_polyline sample at its parameter (1e-12), C1 at the joints and round a closed spline;
samples() is bit-identical to the old fit_polyline over 1180 random open and closed inputs;
SMLib sweeps of a radius-2 circle along an open spline and round a closed one match
pi r^2 L (L by independent quadrature of the curve's definition) to 1e-7 and 3e-8.
sketch/wire.rs: the existing closed-spline test reads SPAN_SAMPLES from its new home.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 1bc0df6d03 doc: a join of many tools into one target unions them in a balanced tree
A Join with one target takes every tool, whichever it meets, but it grew the
target by one tool at a time: each union took the whole result so far, and
each step first meshed it to see whether the tool met it (which with one
target decides nothing). n tools cost n^2 in every per-body step of a
boolean (converting the operands, checking the result, exporting it back),
whichever kernel runs it: a combine of 64 separate pegs (booleans/3455) took
400 s on SMLib, of 36 lofted blades and a disk (crashes/2992, sweeps/1856)
485 s and 97 s.

With one target, the target and the tools are now unioned pairwise, level by
level, so each body takes part in about log2(n) unions. The result is the
same union under the target's name, with the lineage of every union. Several
targets keep the absorption order they need. The doc and engine join and
combine tests passed and failed on SMLib as before (measured before the
rebase).

Not built: base in progress (rebased onto kernel-smlib/no-truck 41adb372).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 e57f2f2a5d brep: a face's points search one grid of its surface, made once
uv::project, given no hint that converges within `accept`, evaluated a grid
of up to 16384 points of the whole surface for every point it placed, then
sorted all of them by distance. The grid is the same for every point of a
surface, and a face's pcurves place hundreds of points on one surface: on a
modelled thread's helical faces that grid was most of a boolean's time on
SMLib, in the operands' records, SMLib's export of each body and the
result's (threads/2526, the ladder's threads).

uv::Starts keeps the grid, filled on first use; uv::project_with takes it,
and a face's pcurve fit (pcurve::On) keeps one per face. The 32 nearest
starts are picked with a partial select instead of a full sort, in the same
order (nearest first, grid order where equally near), so every point gets
the parameters it got before. (The tessellation's boundary projection can
take the same grid; crates/kernel/src/tess is the mesh agent's.)

Not built: base in progress (rebased onto kernel-smlib/no-truck 41adb372).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 667cd33560 solidcraft-smlib: pcurves on B-spline faces are SMLib's own UV trims
On a B-spline face the export now takes each edgeuse's UV trim exactly as
SMLib holds it (EDGEUSE_NURBS_*): the face's parameters are SMLib's, so the
trim is the pcurve, reversed exactly (knots t -> a + b - t) where the
edgeuse runs against its edge, its knots mapped onto the edge record's
parameter where that is an affine image of SMLib's (identity for spline
edges, as_line's map for NURBS lines, the C side's map for lines), and its
end knots set to the edge interval where they differ by rounding (within
the schema's 1e-9 slack, else an error). Changed: export.rs `curves`
(per-edge TrimMap), new `trims`, `mapped`, `Face::given`,
`Edge::trim_map`, the face loop in `native_ordered`, `pcurves`,
`outer_area`.

Analytic faces and circle/ellipse edges keep brep::pcurve: SMLib keeps an
analytic face's trims on its internal rational B-spline (SmCylinder.h:
"the map from one to the other is not linear") and a circle's on its NURBS
parameter, neither an exact B-spline in the record's angle parameters.

brep::pcurve::EdgeUse gains `given`, a producer's exact pcurve taken as it
is (structure and interval checked, moved by whole periods with its loop,
never refitted). Existing construction sites (STEP reader, tests, truck
adapter) pass `given: None`; the existing tests change only for the new
field.

Built, clippy-clean and tested on 4b2c0eaf before the rebase onto
kernel-smlib/no-truck (not built: base in progress).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 8b6bfc48ca kernel: the mesher plans a schema 4 record, with no truck types
tess::plan takes a brep::Brep: faces, loops, shells' face sides and edges in the record's
order. Surfaces go to the evaluator's form from the record (planes, splines and revolutions
through SurfaceEval; a cylinder, cone, sphere or torus as the exact revolution of its line or
rational-arc generator about its axis). Edges are sampled on the record's own curve evaluator
(CurveEval), an intersection curve included, so tess/ssi.rs and the per-node parameters it
carried are gone; every boundary node's parameters come from projection.

No fallback is left in the planner's path: a curve that does not evaluate on its interval is
an error naming the edge (it was a two-point chord, or truck's evaluation); a surface the
evaluator cannot express an error naming the face and its kind. Errors name the face, its
surface kind and, for a node off the surface, the loop, node and point. The module doc states
the order: a cheaper layout where the face suits one, else constrained Delaunay in (u, v),
else an error.

MAX_ANGLE_BOUNDARY and MAX_RELAX are tess::size's own. Removed with truck: the winding test
and pole-to-pole seam test that chose between this planner and truck's mesher, and
boundaries_on_surfaces (truck blends). The tests in tess/ still build truck bodies and are
left for the record-based Body.

(not built: base in progress) tess/ has no errors under cargo check; the rest of the crate is
the no-truck branch's.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 42997a62ed WIP kernel: Body::mesh(&MeshTolerance) as the one mesher (does not build yet)
Body::mesh / mesh_plan / mesh_of and MeshTolerance (chord, display, display_of, export_of)
replace tessellate, tessellate_with, display_mesh*, display_plan*, reference_display_mesh_angular;
every caller in kernel, doc, engine, io, ui-egui, gpu and the CLI renamed mechanically; the
truck-mesher fallback, mesh_shells*, refined* removed; Body::new orients from the planner;
truck-meshalgo dropped from Cargo.toml with the tests of its hooks. Still to fix: trait imports
in tess/*, splitface/lumps/preview/step_in/boolean_record meshalgo uses, measure.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 a1ebe8df3a solidcraft-smlib: Brep::bounds, the exact box, and the fork pinned at 530ee93
Over the fork's new smlib_brep_bounds (SmBrep::CalculateTightBoundingBox): the box of a body
from its exact curves and surfaces, for measuring without a mesh on the SMLib kernel.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 69a7a85cb2 kernel: SMLib sweeps round corners and along free-form paths, lofts with holes or to a point, drafts on a foot
Through SMLib, in place of "not supported yet":
- A sweep along a path with corners: each smooth run swept on its own and
  the runs joined at each corner in a mitre (each run swept on straight past
  the corner and cut back to the plane halving it, where the next meets it
  face to face), including the corner where a closed path closes; only
  moving along the path, the runs meet on the profile. History: walls from
  their segments (found half-way along each run), caps where the path ends.
- A free-form path curve (a spline's Bézier pieces, conics) reaches the
  kernel as PathSeg::Curve, its exact piece, instead of the sketch's
  polyline of lines: SMLib sweeps along the curve itself; truck's sweeps
  flatten it as before (now the piece's own polyline within 0.01 mm, which
  turns ladder 04/004 into a pass for truck too). Patterns along a path
  flatten it and measure as before. A sweep that twists, scales or follows
  rails places its stations by length along the curve.
  (Such a controlled sweep still refuses a path with corners.)
- A loft through sections with holes: each section's outline and holes are
  one SMLib profile, the holes matched as for truck.
- A loft to a point: SMLib's pyramid (smlib_loft_to_point).
- A draft extrusion with a straight foot: the foot's prism and the drafted
  part (sloping from the foot's top to the far end the taper gives) joined
  face to face; each segment names its foot and its sloping wall.

Cases now passing on SMLib: booleans/3633, sweeps/1184, 2435, 3111, 3006,
3505, 561, 96, ladder 04/003 and 004.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 faae48d6ee solidcraft-smlib: Brep::loft_to_point, and the fork pinned at 0294982
The fork's new smlib_loft_to_point (a pyramid from a planar section of lines
to an apex) as Brep::loft_to_point. The pin brings the sweeps' other
changes: a loft's section may hold holes (loops lofted loop to loop), a
sweep along a straight path is an extrusion and one turning with arcs about
one axis a revolution (exact walls), and a sweep round a closed path closes
its walls on each other, without caps.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 cac7d6effd kernel-cases: the hollow ball of case 450 has two shells
The case's own method says one body with an inner shell (the void of
radius 18.5 inside the ball of radius 40), but without a "shells" entry
the rig asks one shell per body. It now asks two, as the method derives.
SMLib still fails the case on its volume: 294558 mm3, near the sum of
the two balls (294604) rather than their difference (241561), so the
inner shell is not taken as a void.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
jyvikoandClaude Opus 5.5 f870ecb874 solidcraft-smlib: pin the fork at ffaf4e8, offset merge and intersection-edge ends
Two SMLib fixes (tangency-labs/smlib r-shell-fillet):
- b0e84f4: faces an extended offset already mated are not intersected
  again in the offset's merge (rig shell/3103, a two-half cone frustum
  shelled open at the top, now one valid solid at the closed-form
  volume).
- ffaf4e8: an intersection edge's end goes to its own vertex when its
  ProtoVertex resolved into several (rig fillets/1488, the slab joined
  with a nudged pleated loft, valid again; booleans/2801 passes too).

Every rig case that passed on SMLib at 2d7c7ed still passes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00