* Sketch: a driven dimension nothing fixes any more takes a value again (#10018)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a driven dimension nothing fixes any more takes a value again (#10018)
A dimension placed while a constraint fixed what it measures goes in
driven, and stayed driven once that constraint was deleted: a
double-click only said it has no value to edit. The double-click now
tries making it driving on a scratch copy; when nothing else fixes it,
the value box opens at the measured value, and Enter makes it driving
(sketch.toggle_driven) at the typed value (parameters.change) in one
undo step. A refused value goes back to a checkpoint, so it stays
driven. While something still fixes it, it stays read-only as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9945
* Sketch: Project gives its new curves the selected line type (#9945)
The sketch palette gives the drawing line type (construction, centerline, infinite) to the
curves a SKETCH › CREATE command reports under `curves`. Project reports what it made per link,
`links[].curves`, so its curves were never found and stayed normal lines whatever the palette
said. `apply_mode` now also reads the links' curves, so a projected line becomes construction,
centerline or infinite and a projected circle construction, in the projection's own undo step.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EMbqRqYimvY26QzcvrojSC
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9489
* Sketch: the Line tool can switch to a tangent arc and back without changing tool (#9489)
With Preferences > Sketch > "Rest on a line's last point to switch to a
tangent arc" on (off by default), leaving the chain's last point and resting
back on it for 0.35 s makes the next click a tangent arc, by the existing
sketch.arc.tangent command, and the same gesture goes back to lines. A label
at the cursor says which. sketch.arc.tangent's end can now name an existing
point, so an outline drawn this way closes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the cursor label names the command in words (#9489)
The label asked the catalog for a message id that doesn't exist, so it showed
the id. It now takes the command's translated label, and the test checks the
words it paints. Moved clear of the pointer's own badge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Show/Hide put every sketch it showed in `shown_sketches`, the list of
finished sketches kept shown although a feature uses them. Hiding and
showing a sketch nothing used yet put it on that list, so once an
Extrude used it, it stayed shown instead of hiding itself as a sketch
never hidden does. Show now marks only a sketch a feature already uses;
one nothing uses is shown anyway and leaves the list alone.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: view corner Cancel cancels an unfinished tool first (#6709)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* View corner Cancel: cancel an unfinished tool before the sketch (#6709)
With OK and Cancel in the view's corner on, the cross took the whole sketch
even with a line half drawn. It now takes the steps one Esc takes first (a
drag, Select Other, the tool's points, then the tool) and cancels the sketch
only when nothing is unfinished. Esc and the cross share cancel_unfinished.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9333
* Equation curves: the variable can carry its range's unit (#9333)
A curve can set variable_unit "range" (or tick the new box in its window): the
variable is then a length, so a ^ 2 / (4 * t) is a length when a is one. Start
and end must both be lengths, or one a length and the other a plain number in
the design's unit; anything else is refused. Saved only when set, as one pending
format change; without it curves behave as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Engine: lower the per-command cost of evaluating large designs
* Engine: lower the per-command cost of evaluating large designs
- The fingerprint texts of features are kept in one store shared by every
worker, not per worker: a command evaluated ahead runs on a new worker each
time, where the per-worker store was always empty and every feature was
written out again. Same texts, same hashes.
- Pinning body names after a command keeps, per feature, the names of the
bodies it made with the state they were read from, so it no longer searches
every result's bodies (features x bodies per command), and finds results by
their index before searching.
- Pinning fingerprints the timeline again only from the first renamed feature
(or a pattern or mirror of features replaying one) when the model proves its
fingerprints are the design's; the fingerprints are those of the full pass.
- The evaluation cache's byte count looks bodies and sketches up instead of
searching them per body (bodies squared per feature). Same counts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9176
* Preferences: turn the view to isometric when Extrude opens, and back afterwards (#9176)
Two new preferences on the Design page, next to "Extrude to a picked target", both off by
default:
- `extrude_view_isometric`: each time Extrude opens, the view turns to the isometric view, so
the depth can be seen right after a sketch seen face-on.
- `extrude_view_return` (only with the first): when Extrude closes, by OK, Cancel or Esc, the
view goes back to where it was before it turned, keeping the projection as the end of a sketch
does (#7038). The check is per frame, so every way the dialog closes is covered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EMbqRqYimvY26QzcvrojSC
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* MCP: batch and execute take expect {volume, bodies, bbox} and flag a mismatch (refs #3380)
An optional `expect` argument on the `batch` and `execute` tools: the volume
(with a relative `tol`, default 0.002), body count and bounding box (0.05 mm)
the agent computed before building. Once the call has gone through the server
measures the design as the `measure` tool does and the reply gains
`expectation: {ok, measured, expected, mismatch}`. A mismatch flags the tool
result `isError` with the mismatch text first; the design is kept as built.
A malformed `expect` is refused before anything runs. Without `expect`
nothing changes, and a batch step carrying one is a step with a stray key.
In 29 logged agent sessions every agent computed these numbers beforehand
and then spent a `measure` call plus a comparison by hand after every stage;
one missed a 0.25 mm skin until it compared. Volume and body count are
kernel-independent checks.
Refs #3380
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* MCP expect: filter then map for the bbox coordinates that are off (clippy)
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* MCP: expect's coordinate text helper no longer shares a name with the JSON reader
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
* claim: Save: hard-link the backup copy and check for unsaved changes once per revision
* Save: keep the backup as a hard link and check for unsaved changes once per revision
The backup of a save is the old file under a second name (a hard link renamed over the
old .bak) instead of a copy written out again; where links are refused (FAT, shares,
cloud folders) or the old file cannot be flushed, it is copied as before. Every point a
save can stop at leaves the design file whole and the backup the version before it.
Session::is_dirty compared the whole document with the saved one each time it was asked,
which the window does every frame for every tab. The answer is kept per revision and pair
of documents; the cache holds both, so neither can change in place while it stands, and
doc_mut lets it go first so edits stay in place.
On the rover in two unsaved tabs an idle frame takes 15.0 ms instead of 19.3 ms; a save
with its backup of the 11.8 MB file writes in 9.6 ms instead of 18.9 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9811
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Agent chat: the system note reaches agents beyond the Claude adapter
The note only went out as `_meta.systemPrompt.append`, an extension of the
Claude adapter, so Codex and Antigravity never saw it. It now also goes in
the standard ACP `systemPrompt` field for agents that offer it, and in
`_meta.antigravity.systemPrompt.append` for Antigravity.
Fixes#9811
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- 247 help texts (help.*) and 95 UI messages: theme options, viewport status, quick measure, personal sheet-metal rules, analysis details, sketch report
- Terms aligned with fr.json; no-break space before : ; ? ! as in the catalog
- Pending file, folded on main after merge
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* claim: #9919
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude: with every body hidden, a new extrude stays New Body instead of turning to Cut (#9919)
Smart Extrude passed the shown bodies as `participants` to keep hidden
ones out (#6901), but with none shown that list was empty, and the
engine reads an empty list as the whole scope: a profile on a hidden
body chose Cut, which has no shown body to change, so nothing was
previewed and OK did nothing. With no body shown it now chooses New
Body.
The operation it latches for a side is also decided again when a body
is shown or hidden while the window is open, as a new start already
does (#467): showing the body an extrude goes into turns it to Cut,
hiding it again back to New Body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Claim #9916
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report a bug: the window can be dragged by its title (#9916)
The window was pinned at the top middle of the screen (ui_kit::Window
anchor), over the model, in a sketch or not. It now starts there and can
be moved (`placed`), as the file-load card can.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
The `initialize` instructions were one paragraph of command shapes. Replace
them with version-neutral guidance: read `skill_reference solidcraft-modeling`
first, plan the numbers, build in a few `batch` calls, the primitive routes
and the fillet-shell-inside-holes order, what follows a parameter, `measure`
after each stage with a coalesced parameter check, and `timeline.edit` /
`parameters.change` / `edit.checkpoint` to fix instead of rebuilding. The
Assistant's system note gets the same pointer; docs/mcp.md says so.
`instructions_name_only_real_tools` now checks the command ids as well as the
tools, and `instructions_recipe_builds_a_parametric_shelled_box` builds a part
the way the instructions describe and checks its volume, axes and parameters.
Refs #3380
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* MCP: measure summary and body_topology faces: cylinders for small verification replies (refs #3380)
`measure {"summary": true}` replies one short object per body (name,
volume_mm3, bbox, faces, closed) with body_count and total.volume_mm3,
as a tool and as a batch step. `body_topology {"faces": "cylinders"}`
replies only the cylindrical faces, the kernel's split halves merged
by radius and axis line into {radius, origin, axis, extent, names},
and no edges. Both defaults are unchanged. The merge uses only what
model.faces and model.edges already reply.
Measured on a 13-feature enclosure, body_topology is 74 KB and measure
1.1 KB per body; agents filter them with scripts, and seven of 29
benchmark runs asked for exactly a cylinders-only listing.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* MCP: keep body_topology's cylinder merge next to check_parameters' without a name clash
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
* Claim part of #9738
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assembly: default names skip names in use (part of #9738)
Contact sets, motion studies and exploded views were named by how many
there were, and a component's placements by how many it had, so after a
delete the next default name repeated one still in use, and commands
given that name acted on the first. They now take the first number no
item has, as joints' and the app's dialogs' default names already do; a
placement keeps the next number when it is free.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9858
* 3-Point Circle keeps snapped clicks as coincident constraints (#9858)
The tool sent only the three clicked positions, so a click snapped to a
point or curve left no constraint and the circle was free once drawn.
Each click now goes as its snap, as the 3-Point Arc's do, and the engine
adds a PointOnCurve for each referenced point, as the centre circle's
through click does (#3099).
* Fix#9858 test: assert the clicked midpoint point, not the line end
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
A new tool that checkpoints the design, sets every value in one
parameters.change, reports measure, errors and cylinder axes, and
restores the checkpoint, so the loop set_parameter / measure /
body_topology / set back costs one call and one rebuild.
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
* Claim #9739
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linked designs: one changed while the assembly was closed is read when it opens (#9739)
A link now keeps the SHA-256 of its design file's bytes as the assembly
last read them (DesignLink::file_sha256, a pending format change), set by
Insert Design, Relink, Extract to File and Update Links. component.links
reports `changed` from it, hashing a file again only when its time or
size changed (vfs::design_path_stamp, behind the design-path rule). The
app treats a link it meets for the first time whose file changed as not
read yet, so opening an assembly, in its own tab or in place of the blank
design, reads those parts again as a tab coming back does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linked designs: read what changed last when a design opens in place of the blank one (#9739)
A read is taken up only by the design revision it started from, and
adopt bumped the revision after starting it, so the read was dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>