* claim: #8341
Co-authored-by: Cursor <cursoragent@cursor.com>
* Graphics: keep a preferred card when surface marks it incompatible (#8341)
Prefer the saved adapter by exact then case-insensitive name, including when only listed as surface-incompatible, and explain in Preferences when another card is still in use.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Format and clippy
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9489
* Sketch: the Line tool can switch to a tangent arc and back without changing tool (#9489)
With Preferences > Sketch > "Rest on a line's last point to switch to a
tangent arc" on (off by default), leaving the chain's last point and resting
back on it for 0.35 s makes the next click a tangent arc, by the existing
sketch.arc.tangent command, and the same gesture goes back to lines. A label
at the cursor says which. sketch.arc.tangent's end can now name an existing
point, so an outline drawn this way closes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the cursor label names the command in words (#9489)
The label asked the catalog for a message id that doesn't exist, so it showed
the id. It now takes the command's translated label, and the test checks the
words it paints. Moved clear of the pointer's own badge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9333
* Equation curves: the variable can carry its range's unit (#9333)
A curve can set variable_unit "range" (or tick the new box in its window): the
variable is then a length, so a ^ 2 / (4 * t) is a length when a is one. Start
and end must both be lengths, or one a length and the other a plain number in
the design's unit; anything else is refused. Saved only when set, as one pending
format change; without it curves behave as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9176
* Preferences: turn the view to isometric when Extrude opens, and back afterwards (#9176)
Two new preferences on the Design page, next to "Extrude to a picked target", both off by
default:
- `extrude_view_isometric`: each time Extrude opens, the view turns to the isometric view, so
the depth can be seen right after a sketch seen face-on.
- `extrude_view_return` (only with the first): when Extrude closes, by OK, Cancel or Esc, the
view goes back to where it was before it turned, keeping the projection as the end of a sketch
does (#7038). The check is per frame, so every way the dialog closes is covered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01EMbqRqYimvY26QzcvrojSC
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- 247 help texts (help.*) and 95 UI messages: theme options, viewport status, quick measure, personal sheet-metal rules, analysis details, sketch report
- Terms aligned with fr.json; no-break space before : ; ? ! as in the catalog
- Pending file, folded on main after merge
Co-authored-by: P'tite Tête <asso@ptitetete.com>
Adds the last 79 German translations for messages that exist in en.json
but are missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the agent chat tool summaries,
the history, sending to a slicer, Perforate, the window system and the
web app.
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the Render studio (lighting,
environment, sun, depth of field), bounded volume and interior scattering,
saved shots, the timeline messages, thread direction and the agent chat
and endpoint settings.
* Add German translations, batch 7 (#7237)
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the parameter list setting and
the Render panel pages: GPU material overrides, nested dielectrics, saved
optics, output size, physical background, presentation filters, preview,
quality budget, regrade and the result area.
* German batch 7: render.result_sequence follows the catalog's Checkpoint term
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <tenbee91@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The last 106 commands on the backlog get the two-sentence help under
their tooltip, in English, German, Japanese, Chinese, Arabic, Hebrew and
Vietnamese: Surface, Sheet Metal, Plastic, Inspect, Construct,
Configure, Parameters, Library, View and the few single ones (Bill of
Materials, Frame Member, Pattern on Path, Convert Mesh, checkpoints).
With that the backlog is empty, so it goes: the test is now
every_toolbar_command_has_help, and the docs that mentioned the backlog
say so. The help tests use sketch.drag, which is not on the ribbon, as
the command without help.
* claim: #9715
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assemblies: mass, centre of mass and inertia per occurrence and rigid group (#9715)
assembly.mass_properties (and Session::mass_properties) gives, for every
occurrence and every rigidly-joined group, mass (kg), centre of mass (mm) and
the inertia tensor about it in world and frame axes (kg mm2), the input
the multibody dynamics work needs. Bodies are measured as Properties
measures them (kernel volume and centre, mesh gyration), once per body,
then moved by each placement and combined by the parallel-axis theorem.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9619
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: edit an added AI agent (#9619)
Agents you added in Preferences > AI get an Edit button between Test and
Remove. It reopens the Add agent dialog filled with the agent's name and
command, or its protocol, preset, endpoint, model and request timeout, and
Save changes the entry in place: same id, permission override and
always-allowed tools. The stored key is never read back into the dialog;
an empty key field keeps it (still only sent to HTTPS or this computer),
a new key replaces it. The control channel gets `edit_dialog`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9060
* Ribbon tooltips: help for the Sketch tools (#9060)
84 sketch commands get the two-sentence help under their tooltip, in
English, German, Japanese, Chinese, Arabic, Hebrew and Vietnamese, and
leave the backlog: every Create tool (lines, rectangles, circles, arcs,
slots, polygons, splines, conic, ellipse, text, points, the 3D sketch
tools, Project, Intersect and the other reference tools), every Modify
tool (Trim, Extend, Break, Offset, Fillet, the chamfers, Move, Scale,
Transform, Blend Curve), the patterns and Mirror, every constraint,
AutoConstrain, Sketch Dimension, Create/Edit/Finish/Cancel Sketch and
copy, cut and paste. The help tests use inspect.zebra as the
undocumented example, since sketch.trim has help now.