* claim: Move: say a part's joint conflicts instead of 'no movable joint axis'
* Move: say a part's joint conflicts instead of 'no movable joint axis'
When a joint of the selected part conflicts with the others (the solver
can't close its loop), Move found no axis and said "This part has no
movable joint axis.", pointing at joint types and limits. It now names
the conflicting joint and suggests editing, suppressing or deleting it.
Parts with no free joint value and no conflict keep the old message.
Refs #10331
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Configuration rules: Then says it lists only the table's columns, and how to add one (#10532)
A rule drives or restricts a column of the table only, so Then leaves out a
feature without a Suppress column or a parameter without a column, where
When lists them all. A note under the list now says so and points at Add
Column.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Configuration rules: the two notes in the complete catalogs (Arabic, Hebrew, Japanese, Vietnamese, Chinese)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10483
* ViewCube: an option to invert the curved roll arrows (#10483)
A new Navigation preference, "Invert the curved roll arrows"
(invert_curved_roll_arrows, off by default): with it on, the two curved
arrows at the cube's corner roll the view the other way within the
screen plane - the clockwise arrow rolls counterclockwise and the
counterclockwise arrow rolls clockwise. The sibling of the cardinal-arrow
inversion from #10286, which left these arrows alone.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
With several bodies to send (after Add all bodies, say), the Print face
input refused every face. It took a print face only when exactly one
body was sent; any other pick was cleared at once, with a note in the
status bar only. Each body's print face then had to be set with Ctrl+B,
or by sending that body alone.
The input now holds the print face of each body being sent. A face
picked in it becomes its body's print face, in place of the one it had.
A click on a body's print face takes it out and clears only that body's.
A face of a body that is not being sent is refused with a message
(`ui.print_face_body_not_sent`, in place of `ui.print_face_one_body`).
Each change is still one `body.print_face` command, so it undoes on its
own. Picks in this window are no longer widened to the other pieces of
the face's surface, so a click on a print face takes it out rather than
adding its neighbours.
The user guide (guide/files.md) says so. The new message is in
assets/locales/pending/print-face-each-body.json, in all 31 languages;
the old one is removed from the catalogs.
Test: dialogs_save_mesh::tests::the_print_face_input_takes_one_face_for_each_body_sent
(fails without the change: the second body's face is refused).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10218
* Assembly: move sketches to the part they're drawn on (#10218)
`component.move_sketches.to_parts` moves each given sketch, or every sketch in the design, whose
plane is an exactly attached face of a part's body into that part through
`component.move_sketches`, as one undo step. Sketches with no single part to go to stay where they
are, and the reply lists what moved and what stayed, with the reason. The Sketches folder's menu
offers it for the folder's sketches (or the selected ones), and a sketch's menu for that sketch or
the selected sketches; the status bar says how many moved and why the others stayed.
`component.move_sketches` now keeps a face-attached sketch where it is on its face: the sketch is
authored in the new component's placement (the face's own when the component owns the face), and
its picked point and repair plane are carried into it. Before, a face-attached sketch moved out of
the design was left without an author placement and failed to evaluate.
* Tests: the moved part is free to move; face anchor path
* Tests: move the to_parts test to the component command tests
* Shorter label: Move Sketches to Their Parts
* claim: #4581
* View angles card: per-axis zero buttons and locks (#4581)
The readout card under the orientation gizmo already showed and edited the
view's yaw, pitch and roll in degrees. Each axis row now also has a zero
button that turns that angle to 0 degrees at once, and a lock: a locked
angle stays put while orbiting, turning with the arrow keys or using a 3D
mouse, and its field and zero button go inert, so a symmetrical view can
hold its yaw and roll at 0 while only the pitch is adjusted.
* clippy: drop needless borrow in keep_locked call
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #10254
* ViewCube: an option to invert the directional rotation arrows (#10254)
A new Navigation preference, "Invert the view cube rotation arrows"
(invert_navigator_arrows, off by default): with it on, an arrow around the
cube orbits the camera the way the arrow points, as in Fusion and Inventor,
instead of rotating the cube toward the side the arrow sits on. Left and
right, and up and down, trade places, and each tooltip names the action
actually performed. The curved roll arrows are not inverted: they name the
rotation they perform, not a direction.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: consolidate Gruvbox contrast variants
* Consolidate Gruvbox variants into light and dark contrast choices
* Check both original Gruvbox viewport gradient endpoints
* Reset Gruvbox scenario state before independent theme checks
* claim: #10215
* Sketch: an option to make the part active when sketching on its face (#10215)
Preferences › Sketch › "Sketching on a part's face makes that part active", off by default.
When it is on, a sketch started on a face of another component's body activates that component
at the picked placement first and is made there, as after an explicit activate. The part stays
active, so what is built from the sketch lands in the same part.
For scripts the same is `sketch.create` `activate_part: true`; the reply's `activated` names the
component and placement. On an error the active component goes back to what it was.
* Tests: a free part, no edge projection, the sketch on the face plane
* claim: #10151
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Sketch: clicking the running tool's button ends it, so clicks select again (#10151)
The lit ribbon button of the running sketch tool started the tool over
when clicked again, so it gave no way out: every click in the view kept
drawing or measuring, and Ctrl+click never reached selection. Esc and
right-click already end a tool, but the pressed button looks like the
natural switch.
A second click on the running tool's button (large ribbon buttons and
the constraint grid) now ends the tool. Persistent analysis toggles keep
their own on/off. The old behaviour stays behind the Sketch preference
"Clicking the running tool's button ends it" (ribbon_click_ends_tool).
Fixes#10151
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #10138
* Follow the system language on a first start (#10138)
The language preference defaults to a new 'system' value: the OS locale
(sys-locale) is matched against the catalog list - exact tag, base
language, then English - and a System choice sits at the top of the
Preferences language list. A saved language still wins.
* Drop the explicit deref clippy flagged; regenerate THIRD-PARTY-LICENSES.txt for sys-locale
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>