Commit Graph
3611 Commits
Author SHA1 Message Date
36bdf4ea3c Sketch drag: drop the second document copy per frame (#10507)
* claim: Sketch drag: drop the second document copy per frame

* Sketch drag: drop the second document copy per frame

edit_solved copied the document to edit it, then stored it with
`*s.doc_mut() = doc`. The command's undo snapshot still holds the old
document, so doc_mut copied the whole design a second time only to
overwrite it. Store the edited document with Session::set_doc instead,
which forgets the same caches and puts it in a new Arc. The design lands
at a new address as before and the command's end records it for the
crash journal (#7502).

A live drag frame on a design of 200 sketches (20k curves) drops from
19.2 ms to 9.4 ms; 50 sketches: 2.3 ms to 1.7 ms.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 10:13:17 +00:00
ddd65cc4bb Move: say a part's joint conflicts instead of 'no movable joint axis' (#10509)
* claim: Move: say a part's joint conflicts instead of 'no movable joint axis'

* Move: say a part's joint conflicts instead of 'no movable joint axis'

When a joint of the selected part conflicts with the others (the solver
can't close its loop), Move found no axis and said "This part has no
movable joint axis.", pointing at joint types and limits. It now names
the conflicting joint and suggests editing, suppressing or deleting it.
Parts with no free joint value and no conflict keep the old message.

Refs #10331

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 10:10:01 +00:00
2a410c2d76 Sketch: Intersect can pick sketch lines (#10484) (#10512)
* claim: #10484

* Sketch: Intersect can pick sketch lines and model edges (#10484)

The Intersect dialog only took faces or whole bodies, so a click on a
line of another sketch (the sides of a rectangle crossed by a plane
through its middle) picked nothing, although sketch.intersect already
cuts edges and sketch curves with the sketch plane. The pick list now
takes faces, edges and other sketches' curves, and the selection filter
reads Geometry | Bodies like Project's.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 10:09:55 +00:00
ABDULLAH 01b43999a5 Arabic: unambiguous last sentence in the Plane Through Axis And Point help (#10561) 2026-11-01 10:09:49 +00:00
Dahak BuildsandDahak Builds bcb5efcaa4 Right-to-left: multi-word Hebrew/Arabic names read backwards; prefs search misses multi-word labels (#10471) (#10562)
* claim: #10471

* Show given names in bidi display order; find RTL prefs labels typed in reading order (#10471)

crate::bidi ran over catalog text only, so a multi-word Hebrew or Arabic
body name showed its words left to right in stored order, and Preferences
search compared display-order labels against reading-order queries.
given_name now returns right-to-left names in display order (browser rows,
tabs, status bar all draw names through it), and text_matches also scores
the query after the same bidi transform.

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-01 10:09:44 +00:00
semmelrindeandClaude Opus 5.5 74ee047d3f Configuration rules: Then says it lists only the table's columns, and how to add one (#10532) (#10544)
* Configuration rules: Then says it lists only the table's columns, and how to add one (#10532)

A rule drives or restricts a column of the table only, so Then leaves out a
feature without a Suppress column or a parameter without a column, where
When lists them all. A note under the list now says so and points at Add
Column.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Configuration rules: the two notes in the complete catalogs (Arabic, Hebrew, Japanese, Vietnamese, Chinese)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 10:09:38 +00:00
ab6e6941c7 View: look hidden bodies up in a set (#10496)
* claim: View: work out consumed sketches and hidden bodies once per revision

* View: work out the sketches features use once per design

Each sketch_shown call walked every feature of the design to tell whether
the sketch is used, and the viewport asks about every sketch several
times a frame. The used sketches are now gathered into a set once per
design (keyed on the design itself, so any edit reads them again).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* View: look hidden bodies up in a set

body_visible walked the hidden-bodies list for every body asked about, and
the viewport asks about every body several times a frame. The hidden
bodies now join the hidden joints and folders in the view's visibility
index, built when the list changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:59:42 +00:00
github-actions[bot] a93d7b207c Regenerate generated files and fold pending files [skip ci] 2026-11-01 10:14:19 +00:00
2b65164159 View: work out the sketches features use once per design (#10545)
* claim: View: work out consumed sketches and hidden bodies once per revision

* View: work out the sketches features use once per design

Each sketch_shown call walked every feature of the design to tell whether
the sketch is used, and the viewport asks about every sketch several
times a frame. The used sketches are now gathered into a set once per
design (keyed on the design itself, so any edit reads them again).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:53:47 +00:00
fbb00dc7b2 Canvas: store reference image data as shared text so edits stop copying it (#10489)
* claim: Canvas: store reference image data as shared text so edits stop copying it

* Canvas: store reference image data as shared text so edits stop copying it

Every edit clones the document, because the undo history still holds the
old one, and the canvas image was a plain String: each of the up to 200
undo states owned its own copy of the base64 text. Canvas::data is now
Arc<str>, like the shared STEP text, meshes and point clouds; serde's rc
feature writes it as the same JSON string, so design files stay byte for
byte the same.

A 4.2 MB image with 250 edits: peak memory 1.09 GiB -> 42 MB, run time
1.16 s -> 0.12 s.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:46:17 +00:00
semmelrindeandClaude Opus 5.5 7702316039 Bosnian: translate the 68 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10445)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:44:28 +00:00
semmelrindeandClaude Opus 5.5 bb0b9a1d2f Browser: a folder that holds only a new group shows it (#10526) (#10529)
* Browser: a folder that holds only a new group shows it (#10526)

New Group from the root's context menu made an empty group in the Bodies
folder, but the Browser draws no folder without items, so in a design
with no bodies yet nothing appeared. A folder that holds groups is now
drawn with them, even before anything is in it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: test that a new group in an empty folder shows and takes a dragged body (#10526)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:44:17 +00:00
74eda80b5d Extrude dialog: work out the automatic operation once, not every frame (#10491)
* claim: Extrude dialog: work out the automatic operation once, not every frame

* Extrude dialog: work out the automatic operation once, not every frame

An open Extrude window with the automatic operation on asked the engine
for `auto_operation` every frame. That probes the bodies with
`Mesh::contains`, rays through every triangle, so a large part cost tens
of milliseconds per frame with nothing changing.

The window now keeps the answer with a key over what it depends on: the
extrude's parameters (participants included), the design's revision and
id, and the active component and occurrence path. The latch still runs
every frame as before.

Open Extrude over a 1M-triangle mesh body: 29.8 -> 0.87 ms per frame
(headless harness, median of 3).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:43:06 +00:00
ea63eec845 Extrude dialog: keep the taper limits while the profile is unchanged (#10503)
* claim: Extrude dialog: keep the taper limits while the profile is unchanged

* Extrude dialog: keep the taper limits while the profile is unchanged

The taper handle is drawn every frame while the extrude window is open,
and every frame it worked out the inradius of each picked profile and of
each of its holes: a grid search over every side, about 200 ms a frame
for a plate with 64 round holes. Only the height changes between frames.

The radii are now kept in the window's state with the profiles they were
worked out for, and worked out again only when the profiles differ. The
limits come from the same arithmetic, so they are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:37:47 +00:00
HiroKenEzandClaude Opus 5.5 64a55392d8 Sketch: a Line chain survives Undo (#10016) (#10019)
* claim: #10016

* Sketch: a Line chain survives Undo (#10016)

Undo could take away the segment the chain was drawing on from, and every
further click was then refused with "unknown sketch point". The chain now
remembers where each segment started and goes back to the last one still there.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:19:23 +00:00
github-actions[bot] 3a6920d10f Regenerate generated files and fold pending files [skip ci] 2026-11-01 09:39:05 +00:00
228b311a6f Raytracer: map faces to looks once (#10502)
* claim: Raytracer: map faces to looks once

* Raytracer: map faces to looks once per body

Preparing a body for the CPU raytracer walked the body's face look list
one entry per work step for every triangle, so a body cost T x (F + 1)
steps (each through the job host) instead of T. The face looks are now
sorted once per body, keeping the first entry per face as before, and
each triangle finds its look with one binary search. Pixels are
unchanged; with 10 000 faces and 50 to 500 face looks, preparation
drops by 40 to 88 %.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:16:23 +00:00
16f00d4cf9 Opening: validate the document once when a model cache is present (#10501)
* claim: Opening: validate the document once when a model cache is present

* Opening: validate the document once when a model cache is present

Opening a design that keeps its model parsed and validated document.json
twice: reading the model cache checked it before decoding the cached
bodies, and read_document, which follows straight after, runs the same
migrations and validation and fails the open when they fail. The open
path now reads the model without that check; geometry(),
read_design_geometry and the preview keep it. A broken document fails the
open with the same error as before.

3,000-feature design with its model cache, bench-open parse step:
426 -> 293 ms (median of 8, heavy machine load). Saving the opened
design gives a byte-identical file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:16:12 +00:00
Dahak BuildsandDahak Builds 9fa3c85c68 Invert the curved ViewCube roll arrows (option) (#10483) (#10539)
* claim: #10483

* ViewCube: an option to invert the curved roll arrows (#10483)

A new Navigation preference, "Invert the curved roll arrows"
(invert_curved_roll_arrows, off by default): with it on, the two curved
arrows at the cube's corner roll the view the other way within the
screen plane - the clockwise arrow rolls counterclockwise and the
counterclockwise arrow rolls clockwise. The sibling of the cardinal-arrow
inversion from #10286, which left these arrows alone.

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-01 09:13:00 +00:00
github-actions[bot] cda0277c3e Regenerate generated files and fold pending files [skip ci] 2026-11-01 08:49:46 +00:00
f233f000e8 Mesh imports: compare by pointer before comparing contents (#10490)
* claim: Mesh imports: compare by pointer before comparing contents

* Mesh imports: compare by pointer before comparing contents

MeshData derived PartialEq, so the dirty check and the autosave check
walked every coordinate and index of a scanned mesh after each edit,
although the document and its saved copy share the same arrays. Compare
shared arrays by pointer first and value by value otherwise, as Points
and Colors already do. About 1.9 ms per comparison for a mesh of one
million triangles goes to nothing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:17:11 +00:00
fcb0a925e2 Sketch: hash sets for the stale-pattern check before each solve (#10493)
* claim: Sketch: use a lookup map for curves in pattern upkeep

* Sketch: use a lookup map for curves in pattern upkeep

Pattern upkeep runs before every solve, each drag frame included, and
looked up every copy curve and its arc points with a linear search over
all ids. Dragging another line in a sketch with a 500-copy slot pattern
spent about two thirds of each frame there. The ids now resolve through
maps built once per call; the result is the same to the bit.

The solve bench gains a circular slot pattern section.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: hash sets for the stale-pattern check before each solve

The check whether a pattern lost a seed, copy or relation built three
ordered sets of all ids before every solve. Only membership is asked, so
hash sets give the same answer; a drag frame in a sketch with a 500-copy
pattern takes another third less.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:17:05 +00:00
71624cf7fa Sketch: use a lookup map for curves in pattern upkeep (#10524)
* claim: Sketch: use a lookup map for curves in pattern upkeep

* Sketch: use a lookup map for curves in pattern upkeep

Pattern upkeep runs before every solve, each drag frame included, and
looked up every copy curve and its arc points with a linear search over
all ids. Dragging another line in a sketch with a 500-copy slot pattern
spent about two thirds of each frame there. The ids now resolve through
maps built once per call; the result is the same to the bit.

The solve bench gains a circular slot pattern section.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 09:16:59 +00:00
PapaEcho ce72abacf9 Construct: plane through an axis and a point (#10178) (#10472)
* claim: #10178

* feat: add plane through axis and point (#10178)
2026-11-01 09:15:25 +00:00
Dahak BuildsandDahak Builds f25a8e6abc Fix tooltip delay bypass on sequential menu hovers (#10481) (#10482)
* claim: #10481

* Restart tooltip delay per menu row and place tips beside the drop-down (#10481)

* Format

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-01 09:10:54 +00:00
Leo 24b91bd453 Sketch Concentric: accept a circle or arc and a sketch point (#10487) 2026-11-01 07:57:43 +00:00
github-actions[bot] 22f12e80e4 Regenerate generated files and fold pending files [skip ci] 2026-11-01 08:13:20 +00:00
semmelrindeandClaude Opus 5.5 1b02f38732 German: translate the 20 messages the catalog lacks (Move Sketches to Their Parts, the view cube's arrows, view angle locks and more) (#10488)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 07:45:55 +00:00
FrankandClaude Opus 5.5 7239c95858 Sketch Project: round edges project as arcs, not short lines (#10312)
Projecting a whole body fitted its outline from mesh edges: a round wall seen
edge-on has triangles leaning a hair either way, so the outline zig-zagged
between both rims and broke into two-point pieces (lines), and seams where two
faces' triangles don't share vertices counted as open, outline edges. Faces
that face one way all over (planes, cylinders and cones about the sketch
normal) now decide for all their triangles, near vertices are welded, and a
seam between two faces facing the sketch is no outline. A STEP hook went from
159 lines to 10 lines and arcs.

A single rounded or chamfered rim of a cut curved face is a spline that only
follows its circle; read as Bezier pieces it came in as twenty splines. An
edge read as spline pieces that stays on a circle within 1e-5 of its radius,
in a plane parallel to the sketch, now comes in as that arc.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 07:13:00 +00:00
clark19990andclarkliu f90b6116d5 Measure: datum planes, axes and points, at exact distances (#10157)
* Measure: datum planes, axes and points, at exact distances

The Measure tool took faces, edges, vertices and sketch geometry; a datum
plane or axis could not be picked into it, and a point set of an infinite
plane or axis would measure the wrong thing anyway.

Describe origin and construction planes, construction axes and construction
points as items, accept PLANES, AXES and CONSTRUCTION_POINTS (and the origin)
in the Measure dialog, and give the new shapes exact closest points:

- a point and a plane: the perpendicular distance;
- a point and a line: the perpendicular distance;
- two planes: parallel distance, or zero where they meet;
- a plane and a line: zero where they cross;
- two lines: the skew distance.

The panel and the quick readout show a plane's point and normal, and an
axis's point and direction.

Test: a point 10 above the XY plane, 5 from the Z axis, and a plane and an
axis that meet.

* Select: a straight sketch line is a curve in an input that takes curves

Adding axes to Measure's input made a straight sketch line match the "axis"
rule before the sketch-line rule, so a picked external sketch curve became a
SketchCurve instead of the ExternalSketchCurve Measure records. The axis rule
now applies only to inputs that take axes on their own (Move's direction and
the like), not to inputs that also take curves.

Test: measure_input_fits_external_sketch_geometry, and the Move axis picks.

* rustfmt: format the new selection filter and measure code

* Measure: drop an unused normalisation in the skew-line distance

---------

Co-authored-by: clarkliu <277482660@qq.com>
2026-11-01 07:04:03 +00:00
semmelrindeandClaude Opus 5.5 38b9ff223b Frames: a renamed cut-off piece keeps its name when the design is rebuilt from its features (#10438) (#10466)
* Frames: test that a renamed cut-off piece keeps its name in a rebuild from the features alone (#10438)

solidcraft-cli eval rebuilds a saved design without its saved model; the
rename made after a cut then lands on the first line's member. The test
reproduces it on main; the fix follows.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: a renamed cut-off piece keeps its name when the design is rebuilt from its features (#10438)

Since #10132 a cut's pieces past the first belong to the cut and the piece
that keeps the body's name to the body's own feature. Ordering the pieces
by their faces then moved the names among them but left each body's
feature behind, so the cut-off piece said the frame member feature made
it. body.rename stored its new name there, in the first line's slot, and a
rebuild from the features alone (solidcraft-cli eval of the saved file)
named member A after it. A name now moves together with the feature it
belongs to.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 06:43:40 +00:00
github-actions[bot] d96d547f6b Regenerate generated files and fold pending files [skip ci] 2026-11-01 06:53:11 +00:00
github-actions[bot] 05a8911f83 Regenerate generated files and fold pending files [skip ci] 2026-11-01 06:43:56 +00:00
semmelrindeandClaude Opus 5.5 1581d85cba Czech: translate the 68 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10446)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:44:50 +00:00
semmelrindeandClaude Opus 5.5 ad54bdf8eb Danish: translate the 69 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10447)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:44:32 +00:00
C.VengelsandClaude Opus 5.5 7bafc99390 Send to Slicer: the Print face input takes one face for each body sent (#10468)
With several bodies to send (after Add all bodies, say), the Print face
input refused every face. It took a print face only when exactly one
body was sent; any other pick was cleared at once, with a note in the
status bar only. Each body's print face then had to be set with Ctrl+B,
or by sending that body alone.

The input now holds the print face of each body being sent. A face
picked in it becomes its body's print face, in place of the one it had.
A click on a body's print face takes it out and clears only that body's.
A face of a body that is not being sent is refused with a message
(`ui.print_face_body_not_sent`, in place of `ui.print_face_one_body`).
Each change is still one `body.print_face` command, so it undoes on its
own. Picks in this window are no longer widened to the other pieces of
the face's surface, so a click on a print face takes it out rather than
adding its neighbours.

The user guide (guide/files.md) says so. The new message is in
assets/locales/pending/print-face-each-body.json, in all 31 languages;
the old one is removed from the catalogs.

Test: dialogs_save_mesh::tests::the_print_face_input_takes_one_face_for_each_body_sent
(fails without the change: the second body's face is refused).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:44:15 +00:00
semmelrindeandClaude Opus 5.5 e537a63988 Croatian: translate the 68 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10449)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:44:11 +00:00
semmelrindeandClaude Opus 5.5 984a5de001 Galician: translate the 68 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10448)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:44:11 +00:00
semmelrindeandClaude Opus 5.5 a799318b0f Hungarian: translate the 68 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10450)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:44:00 +00:00
github-actions[bot] f989b3309f Regenerate generated files and fold pending files [skip ci] 2026-11-01 06:18:58 +00:00
github-actions[bot] 8771b734e4 Regenerate generated files and fold pending files [skip ci] 2026-11-01 06:09:49 +00:00
semmelrindeandClaude Opus 5.5 ef081519d5 Italian: translate the 62 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10453)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:43:48 +00:00
semmelrindeandClaude Opus 5.5 2a3d29766e Indonesian: translate the 68 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10451)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:43:38 +00:00
semmelrindeandClaude Opus 5.5 058f17cc37 Malay: translate the 68 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10454)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:43:32 +00:00
semmelrindeandClaude Opus 5.5 6475418169 Norwegian Bokmål: translate the 68 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10455)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:43:20 +00:00
semmelrindeandClaude Opus 5.5 1a76f80bae Dutch: translate the 68 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10456)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:42:36 +00:00
semmelrindeandClaude Opus 5.5 f7ceba9cca Romanian: translate the 68 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10457)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:42:34 +00:00
semmelrindeandClaude Opus 5.5 249ca9267a Russian: translate the 68 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10458)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:42:32 +00:00
semmelrindeandClaude Opus 5.5 119168cb3e Turkish: translate the 67 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10461)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:42:19 +00:00
semmelrindeandClaude Opus 5.5 2eb81a79b5 Swedish: translate the 68 messages main gained after batch 10, the regrouped Preferences included (batch 11) (#10460)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 05:42:19 +00:00