Fold the pending design format changes (browser-nested-groups, point-cloud-properties, print-faces) into format 45.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9741
* motion.list gives study keys in motion.study units
Angle keys came back in radians while motion.study takes degrees, so an
agent that listed a study and wrote it back changed every angle by a
factor of 57.3, silently. Convert key values on the way out like
joint.list does (degrees for angles, mm for distances), give each key a
unit and its joint's name, and add a round-trip regression test.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #9407
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Section caps: a body touching another along a curved face keeps its own cap (#9407)
Seen through a cut, a far wall and another body's face lying on it (a shaft
in its bore, a ring in its housing) are the same surface faceted two ways, so
the marking pass let the other body's face win in streaks. The section's
passes now first count the faces behind the cut in the stencil (back +1,
front -1): where the count says the cut runs through a body but a front face
won, the back faces are drawn again pulled toward the eye by a few pixels and
take the cap back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9279
* Parameters: an option to hold edits until Apply or OK (#9279)
"Apply each change as you leave its field" (on by default, remembered in
the preferences as parameters_apply_live). Off: an expression edit is
checked when its field is left but waits, without a preview; Apply or OK
sets every held edit in one parameters.change {changes}, so the design
rebuilds once and one undo takes them back. Cancel, the close button and
Escape drop them. Turning the option back on applies what waits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the parameters_apply_live preference in ui.prefs (#9279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: the hint says edits wait for Apply or OK when they do (#9279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the remaining CPU lighting and
reflection controls, render diagnostics, lens and film effects, GPU path
tracer options, HDR source details, the resource library and the raw
linear EXR options.
* claim: #9144
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DXF export: the full release 2000 file structure strict readers need (#9144)
The view and flat pattern DXF left out parts of the AC1015 file that a
strict reader expects: the CLASSES section, the VPORT, VIEW, UCS, APPID
and DIMSTYLE tables (with *Active, ACAD and Standard) and the ACAD_GROUP
dictionary under the root dictionary. They are written now, along with
$DWGCODEPAGE; the active viewport looks at the whole drawing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8776
* Crash reports: a window opened after startup no longer labels the run "during startup" (#8776)
egui-wgpu reports "window surface" and "surface configure" for every native
window, also the ones opened after startup, such as the agent chat in its own
window. Each one overwrote the journal's "running" phase, so a later unclean
exit was reported as "during startup (surface configure, N s after launch)".
crash::startup_step records a startup step only until the app runs, and the
app's egui-wgpu hook calls it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9472
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Browser: the recover-unsaved-work card always shows Recover and Discard
A window's scrolling body was only offered the height the card had the
frame before. A card first laid out while the page was still tiny (a
browser canvas not sized yet) kept a body of no height for good, so only
its title showed and the required choice could not be made. The body is
now offered the room the screen leaves and shrinks to its content, which
also covers the desktop recovery card and every other system window.
Fixes#9472
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the quick measurement, a few
Preferences labels and a large part of the Render panel (adaptive
sampling, surface aging, camera background, CPU lighting and environment).
* claim: #9565
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* feat(browser): reorder features by dragging rows of the History in the browser
Let users drag features in the History shown in the browser to move them, with the same drop bar and checks as the History at the left, while the rollback marker still drags on its own.
refs: #9565
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Add Finnish (fi) UI localization (#9626)
A fi catalog ("Suomi") translated from en.json, all 4801 messages,
registered in LOCALES between es and fr, with
finnish_catalog_is_registered_and_translates_keys, the language listed
in docs/localization.md (registered and partial) with its terms, and a
pending attribution row.
Fixes#9626
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Finnish: the 3D mouse Restore defaults button gets its own label
It shared its text with Restore defaults elsewhere on the page, so the layout test found
the wrong button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Janiz-zzz <267742026+Janiz-zzz@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #9492
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* fix(viewport): keep running when the view area comes out inside out
Make the layout beside the docked Assistant give way instead of closing the app when a window reconfigure leaves the view area inverted.
refs: #9492
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #3305
* fix(agent-chat): support ACP configuration options (#3305)
Handle current select options for model, thinking effort and mode, with confirmed snapshots and legacy compatibility. Full quality gate attempted; draft delivery authorized with unrelated geometry/property/timing failures documented in PR #3867.
* fix(agent-chat): keep configuration selectors inline (#3305)
Use compact value pickers and bounded wrapping to preserve conversation space; verified at normal and narrow widths with the installed OpenCode V2 server.
* style(agent-chat): format tool events
* claim: #9358
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: the expression field opens wide while you edit it (#9358)
A parameter's expression that is too long for its cell opens over the
cells to its right while it has focus, wraps instead of scrolling, and
shows the live value or error under it. Enter still applies it and the
field returns to its column; a short expression stays in its cell. The
add row's expression field does the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On a loaded runner the hover alone has taken 70 ms against a 190 ms index, which failed
unrelated pull requests. Waiting for the index would still cost all of it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6106
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Extrude: a sketch picked in the Browser or History takes all its profiles (#6106)
With Extrude, Revolve or Emboss open, a plain click on a sketch row in the
Browser or on a sketch in the History now fills Profiles with every profile of
that sketch (the island inside another profile's hole is left out). Before, the
click only changed the selection, which the dialog never reads.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #2227
* 3D mouse: optional orbit while a sketch is open (#2227)
A new Navigation preference, "Turn sketches with the 3D mouse"
(space_mouse_sketch_orbit, off by default), lets the cap and a device
app turn the view while a sketch is open and seen square on, as the
mouse already can. Off keeps today's behaviour: pan and zoom until the
view is tilted away from the sketch (#6687). Restore defaults on the
3D mouse section resets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: keep the settings list in order after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #9495
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assistant: say when a reply hit its length limit or was declined, not that the model lacks tools (#9495)
The API client never read why an answer stopped, so a Claude reply cut
off at max_tokens while thinking (its thinking text is empty by default),
or a refusal, ended the turn as normal with nothing said. The chat then
blamed tool support: "The model didn't use SolidCraft's tools".
Reply now carries the stop reason: Anthropic stop_reason max_tokens and
refusal, or OpenAI finish_reason length and content_filter and a message
refusal. Any other value is a normal end. The turn ends with that reason,
which already keeps the tool-calling notice away, and the chat shows
what happened in place of the raw "(max_tokens)", for ACP agents too. A
tool call cut off at the length limit has incomplete input, so it is
neither run nor kept in the history.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: each dropdown option shows the hole it makes while hovered
Extents, Hole Type, Hole Tap Type and Drill Point list names only, so seeing
what an option makes meant picking it. Hovering an option now shows a small
section of that hole beside the list, drawn by the dialog's own section
painter from a copy of the form with the option applied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01UhpMr6L9PR8SJXjM6MbQrD
* Hole: give the dropdown previews a gallery entry
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: danieldimitrov86 <danieldimitrovdev@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
While Frame shows the picture's frame, the preview projects into that frame
rather than the viewport, but Fit Product and the fit on entering Render
framed the product for the viewport's free area, so a picture taller than
wide cut the product at its sides. The fit now uses the viewport layout
seen from the frame (the frame as the viewport, the free area inside it
with the usual 16-point margin).
Entering Render fitted before the saved setup replaced the draft, so a cold
workspace with a portrait setup fitted for the old draft's aspect; the fit
now runs once the setup in effect is loaded.
render.camera.fit takes the picture's aspect (0.000001 to 1000000) through
Camera::fit_aspect, which publishes only a valid fitted camera: an aspect
that would divide the distance into infinity is refused and the previous
camera, document and undo stay as they were.
* Claim #9479
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: an option to keep value boxes out of the view (#9479)
Design > "Show values beside their handles in the view", on by default.
Off, a command's value box (Extrude's Distance, Fillet's Radius, a hole's
reference distances...) isn't drawn over the model; the command window's
value field takes the keyboard that opening the window or a pick gives the
box, its text selected, so a number typed after a pick still sets it. The
handles stay and still drag the value.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: the value box option in Arabic, Hebrew and Vietnamese too (#9479)
The complete catalogs must carry every English message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #8941
* Render: a size the CPU methods refuse names the profile that renders it (#8941)
The Shots strip offers 4K UHD whatever the method. Under the default CPU
raster, and under CPU ray tracing's default Compact profile, Render was then
refused with English engine text that didn't say how to render that size.
The refusal is now translated and names the smallest CPU resource profile that
admits the size (with CPU ray tracing, for raster, which has no profiles). The
size lists mark such presets. Nothing is switched: method, profile and
resolution still change only when chosen, and GPU path tracing is unaffected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8563
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: sort each section by name (#8563)
The Name heading of every Parameters table steps through A to Z, Z to A and the
listed order. Each section sorts on its own: Favorites, User Parameters and each
model group (the groups keep the design's order). Names compare in natural order
(d2 before d10, letters ignoring case). The choice is kept in egui's persisted
memory like a section's open state. While sorted, a user parameter's move arrows
are disabled. The sortable heading and natural_cmp live in ui_kit::table.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters sort: gallery entry for the sortable heading, natural_cmp private
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: nest groups and reorder components
Groups can hold other groups (up to 8 levels) and be reordered with the
items around them. Sub-components can be reordered too, through a new
`components` list in `browser_order` that is not drawn as a folder.
Document: `BrowserGroup` gains `parent`; group items and `browser_order`
lists hold `BrowserEntry` values (a number is a group, a string an item).
One pending format file; older designs read unchanged. Loading and
refreshing drop what the lists name that is gone, and cut cycles and
over-deep nesting to the top level.
Engine: `browser.group` takes `parent`; `browser.move`, `browser.order`
and `browser.ungroup` handle groups. A change to only the browser's
groups and order no longer re-evaluates the model.
UI: nested rows, dragging a group row (top of a row: before it, the rest:
into it), New Group inside a group, and dropping a placement on the top
of a sibling to reorder it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Fixed formatting
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Fixed unintended side effect in render scene browser test
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Preserve group order in render workspace
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Increased test coverage
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Updated clipboard test from upstream main for group item type
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #9281
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch text: a number parameter in the words shows its value (#9281)
A text's words expression can now name a number parameter: `'W' + Width`
reads "W85 mm" (lengths in the design's units, angles in degrees, up to
three decimals). `number(Width)` drops the unit and `number(Width, 2)`
fixes the decimals. The words and the cut follow a parameter edit in the
same rebuild, a rename reaches inside number(), and deleting the parameter
is refused while a text shows it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch text: a Text starting with = builds its words from parameters (#9281)
In Edit Text, a Text that starts with = is the words' expression
(='W' + number(Width)): OK keeps it, the dialog shows it again with its =,
and an untouched OK no longer turns it into typed words. Typed words still
replace it, and a saved text that happens to start with = stays typed
until it is edited. The field's tooltip says how.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch text: the formula hint in every complete catalog (#9281)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9246
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: Down arrow in an empty field lists every named parameter (#9246)
In an empty expression field, Down opens the completion list with every
named parameter (not just the first eight), armed on the first one; Up and
Down walk it, the list scrolls to keep the chosen row in view, and Enter
inserts it. A field that already holds text keeps Down for itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: Preferences caps the Down-arrow parameter list (#9246)
Down arrow in an empty field lists the parameters up to "Parameters
listed by Down arrow" in Preferences > Design (default 50, 5 to 200),
favourites and the design's own parameters first, so a large design
does not build a list of hundreds of rows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: a label that fits for the parameter list cap (#9246)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Expressions: the parameter list cap in every complete catalog (#9246)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
After a lost device the next start began from on_exit, while eframe was
still writing app.ron, and the old process then hung in
vkDestroySwapchainKHR on NVIDIA. Start it from Drop for App instead, after
eframe has joined the settings save and before it drops the window's GPU
surface, and end the process there after a loss. The update restart moves
there too. The loss reason is passed to the next start and shown in its
note.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The test asserted the readout was still empty right after the first poll, but the measuring thread can finish first, so it failed now and then in merge groups and on unrelated pull requests. It now asserts only that the measurement arrives.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Everything en.json gained since the last catch-up except the render.*
messages: Preferences, navigation bar, assistant settings, materials,
hole presets, joint move, edit in place, point clouds, view angles,
tool help texts and error hints. Added as one pending locale file.
* Sketch: the coordinate readout starts right of the pointer arrow (#9480)
The readout of a sketch tool's point (2D and 3D sketches) started 10
points below and right of the snapped point, under the system arrow,
which hangs about 12 points wide below the hot spot and covered the
first value. It now starts 18 points right and 10 below the pointer
(the point snaps away from it), from the snapped point only when there
is no pointer over the view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the readout clears the next larger pointer too (#9480)
The reporter uses the system's pointer size 2, whose arrow is about
18 × 28 points: start the readout 26 points right of the hot spot
instead of 18, and test against that arrow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The clamp that crashed #9492 (f32::clamp between a view's edges, which
panics once the view comes out inside out) also sits in the room tool
windows get beside the docked Assistant, the Render selection bar's
anchor and a left-anchored panel's anchor. Use shell::within there,
the clamp that gives the lower edge for an empty range (#9271).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9081
Co-authored-by: Cursor <cursoragent@cursor.com>
* Tell same-named recent designs apart (#9081)
Show the file name with extension, ellipsize long paths in the middle so the end stays visible, and label imports by kind (STEP, STL, …) instead of always Design.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Start: Recent paths take their ink from the theme, and the middle-ellipsis helper is exported for tests only
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9170
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Model cache: a design with mesh bodies keeps its saved model (#9170)
One mesh body (an inserted STL or 3MF, or a STEP part shown as a mesh of
its faces) left the model cache out for the whole design, so opening it
evaluated every feature again. The doc records refused mesh bodies, and
the native B-rep codec the io cache stores bodies with refuses them too.
Kernel work is paused, so the kernel is left alone: the io cache stores a
mesh body as its own slice kind (SCMESH01, a JSON header with the counts,
colour and paint, then the vertices as f64 and triangles as u32), read
back through mesh_body, with_color and with_paint. A mesh body is kept
only when its slice reads back as the same vertices bit for bit, the same
triangles, colour and paint. The decoder checks the counts against the
bytes before allocating. The picture shown while opening draws a mesh
body with its own triangles (native_preview_mesh refuses mesh bodies).
Cache version 4 -> 5; docs/design-container.md describes the mesh slice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Model cache: decode mesh slices with as_chunks, as clippy asks
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #9417
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assistant: drop earlier thinking blocks when history is trimmed (#9417)
Claude signs each thinking block against the conversation before it. Once
drop_old_views swaps an older view for a note, or trim_history drops the
oldest messages, every later block stops matching and the API refuses the
request with HTTP 400 "Invalid signature in thinking block". For the
Anthropic protocol, a trim now also removes the thinking and
redacted_thinking blocks from earlier replies, which the API allows. A
reply that was only thinking keeps a short note. Requests where nothing
was trimmed are sent unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9324
* Sketch: Project takes a construction axis, not only X, Y and Z (#9324)
sketch.project with {"axis": "Axis1"} upper-cased the name, and the axis link knew only the
origin axes, so a construction axis failed with "unknown axis `AXIS1`". X, Y and Z (any case)
are still the origin axes; any other name must be a construction axis, kept as its feature names
it. The link finds the axis where the timeline before the sketch puts it (construction_axis_in,
as Revolve does) and projects it as an origin axis: its line in the sketch plane, or a point
when the axis stands square to it. Renaming the axis renames the link, as for a construction
plane's projection.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #8398
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Closing: stop the Home picture builds instead of waiting for them (#8398)
Dropping SolveApp waited up to 10 s for the Home picture threads to end
(#6063). The thumbnails thread imports and rebuilds every cold recent
file (STEP and mesh imports, designs without a stored picture) one after
another, and its channel only closes once all are done, so closing the
window froze until every cold recent was built or the 10 s ran out.
The picture threads now build under a shared progress watch that
finish_pictures cancels first: the design being built stops at its next
feature (a STEP import at its next step), the remaining cold files are
skipped, and a build stopped part way draws and caches no picture.
Pictures already on the GPU are still waited for, so the driver crash
#6063 fixed stays fixed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Quick measurement: the selection's length, area or distance in the view's corner (#7000)
With edges, faces, sketch curves or points selected, the view's bottom right corner above History
shows what they measure, as the Measure tool lists it: an edge's length (Ø and R for a round
one), a face's area, a point's position; two items' distance and angle; several edges' or faces'
count and total. It is computed off the window thread from a copy of the session whenever the
selection or the design changes, and a click copies it. Preferences > Interface turns it off. The
Measure dialog's rows come from the same function.
* Quick measurement: off by default, turned on under Preferences > Interface (#7000)
The quick_measure preference now defaults to false, so nothing changes until it is turned on.
Its tests turn it on, and a new test checks that nothing shows until it is.
* claim: #8315
* fix(control-server): release the watch seat deterministically (#8315)
The seat a subscribed connection holds on the DesignWatch lived in the
events thread alone, so it left the watch only when that thread ended:
on the first write a closed client refuses, which needs the design to
move, or when the thread noticed the end of the stream, which waits for
the connection's own thread to come out of its blocking read. A closed
connection could therefore keep counting on the watch for a second or
more, and the test that asks for the count to be gone could lose its
race with the ten seconds it waits.
The seat is now shared: it leaves the watch once, whichever thread sees
the connection's end first, the connection's own thread at the end of
the stream or the events thread at the first refused write. The count
of subscribed connections is right as soon as the connection is gone,
and the events a subscribed connection is told of do not change.
* claim: #6262
* Inspect Sketch: the ribbon button opens a Sketch report window (#6262)
sketch.inspect gets a place on the Sketch tab (Inspect panel). ui.start opens a
read-only Sketch report: solver status, degrees of freedom left, counts of
curves, points, constraints and profiles, the curves and points that are not
fully constrained, and Copy JSON. engine.execute still only returns the JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Inspect Sketch: a Sketch Report button on the Sketch tab while a sketch is open (#6262)
SKETCH/INSPECT placed it in the Inspect tab's Surface Quality drop-down, which
is hidden while a sketch is edited. It now has its own Inspect panel on the
Sketch tab, labelled Sketch Report; the test clicks the ribbon button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Report: strings in a pending locale file, help for sketch.inspect (#6262)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Report: the Sketch tab fits at 1366 px; the width test closes the report (#6262)
The panels left of the Finish group keep the gap before it when they are fitted,
so they collapse before they reach it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Frank <plexi32@gmail.com>
Opening a DWG stopped with "design file is not UTF-8 JSON". It is told
apart by its signature, whatever the file is called, and the error points
to STEP or DXF.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9001
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a projected face follows a resize that moves its corners far (#9001)
A sketch on the face of an angle kept its projected face boundary (and
reported "projected face boundary identity is ambiguous") when the wall
thickness changed: the inner corner moved by more than a tenth of the face,
past the nearest-point match, and the same-order fallback refused faces.
Accept the same-order layout when, for every point, the point read in that
order is also clearly the nearest one on the same loop with lines the same
way. Rims and holes, and rotated readings of a rectangle, stay refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9341
* Insert Part: seat a fastener in several holes at once (#9341)
parts.insert / parts.fastener take `at` as one pick or a list of picks.
The part is built once as one component; each hole gets its own
placement and rigid seat joint. All placements are made before any is
seated, since joint.create takes the part's seating point where the
placement is. The insert now runs on a scratch session like
parts.resize, so it is one undo step, and a pick off every body fails
it before anything is made.
The Insert Part dialog's hole input is multi-select ("Holes
(optional)") and OK passes every pick.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Part: picks on one hole's rim seat one part (#9341)
A hole's rim is drawn as two half-circle edges, and one click on it
picks both, so four clicks gave eight picks and two screws per hole.
Picks whose wall point lies level on the same hole axis, on the same
body placement, are one hole.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A comma separates arguments only directly in a function call, so plain
parentheses take a decimal comma like the rest of an expression:
`-(width-0,5)/2`. The UI no longer rewrites commas before wrapping a value
in the design unit's parentheses.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9297
* Assistant on Windows: find Node in its install folder when the launcher's PATH lacks it (#9297)
An npm-installed agent starts on Windows through its .cmd shim, which runs `node`, with the PATH
search_dirs makes: SolidCraft's own PATH, then npm's and other installers' folders. Node's own
install folder was not among them, so started from a launcher that leaves it off the PATH (the
ArtCraft launcher), the agent stopped with "'node' is not recognized". The search now also takes
%ProgramFiles%\nodejs, %ProgramFiles(x86)%\nodejs and nvm-windows' %NVM_SYMLINK%, after
everything it took before. search_dirs reads its variables through search_dirs_in, so a test can
give it a launcher's environment.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Point clouds: colour and filter by any property of a PLY file, on range tracks (#5151)
A PLY file's other vertex properties are kept as named numbers on the
points (whole-numbered for integer types; a comment `property: 0 name,
1 name` names a label's values). A cloud is coloured by any of them, a
ramp or a palette for whole numbers, and filtered by up to eight, each a
range or a set of named values. The GPU colours and filters the points
itself, so editing a range uploads nothing.
In the Edit Point Cloud card each range is a track, as in an audio
editor: a histogram of the property over what the other filters keep,
stacked by colour, under an overview strip. Ranges are drawn, moved,
snapped to colour changes, typed (Start, End, Length, relative values)
and played (Space or Play). The automatic colour range is exactly the
values the property takes over what the filters keep.
pointcloud.insert and pointcloud.edit take color_by: <property>,
color_range and filters; pointcloud.list reports them with the
properties. docs/point-clouds.md describes it all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Point clouds: note the saved properties, colouring and filters as a pending format change (#8816)
A design now saves a cloud's per-point columns and their value names, colouring by a property and
filters; an older release must refuse it instead of dropping them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7971
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Toasts: a close (×) with a countdown ring instead of a Close button (#7971)
Every toast the user may close (the status, the 3D mouse offer and the
stand-up note) has a close (×) at its top right, handle toast:<name>:close,
in place of a Close button; it does what the button did, is a kit-drawn
button with an accessible name and hover text, reachable by Tab, and dead
behind an issue report. Toasts that go by themselves draw a thin ring
around it that shrinks over their time; pointing at the offer or the note
starts their time again, as before, so their ring is full while pointed at.
The 3D mouse offer keeps three buttons, Calibrate…, Use Direct Driver (the
detail in its tooltip) and Never show again, on one row: the corner
toasts are 400 points wide, as the row's estimated widths need 356.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Toasts: lay buttons out at their drawn widths; corner toasts 360 wide (#7971)
The toast's button rows used an estimate of each button's width that ran
about 40 points over the kit button as drawn, which wrapped the 3D mouse
offer's three buttons and left the main action short of the right edge.
Each button's drawn width is now remembered and the rows laid out with it
(the estimate stands in for the one frame before a button was first
drawn), so the main action is flush right; the corner width is the
smallest round one that fits the offer's three buttons in a row: 360.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Toasts: keep the analysis status test whole after rebasing onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
On Macs patched with OpenCore Legacy Patcher the OS reports a newer
macOS version than the GPU's Metal compiler supports, so wgpu picks a
shader standard the compiler refuses (`invalid value 'metal3.2'`) and
the window never draws.
The variable has to be set before the process starts, and Rust 2024
makes `set_var` unsafe (this crate denies unsafe code), so main()
now re-launches the binary with SYSTEM_VERSION_COMPAT=1 when the OCLP
NVRAM key (OCLP-Version) is present, and exits with the child's status.
A process that already has the variable set never re-launches, so
there is no loop and a user's own value is respected. If the check or
the spawn fails, startup continues normally.
Tested on an OCLP Mac: one re-launch message, graphics render
correctly; with SYSTEM_VERSION_COMPAT=1 set beforehand it does not
re-launch.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* Help: add manual update checks and status window
* Test manual update checks and localized results
* Add update check to the native Help menu
* Localize Help update checks in all app languages
* Document manual update checks from Help
* Document ui.help updates control action
* claim: #7535
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Vendor accesskit_macos 0.26.3 as published (#7535)
The published package, unchanged, so the next commit shows the fix as a diff.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* macOS: quitting on a Mac with a Touch Bar no longer crashes (#7535)
eframe's accessibility adapter (accesskit_macos 0.26.3) swaps the window's
view to a subclass of its own. When AppKit's Touch Bar observes the first
responder (nextResponder), key-value observing subclasses the view again.
Dropping the adapter on quit reset the view's class, which threw away KVO's
subclass, so AppKit's removal of its observer raised NSRangeException ("not
registered as an observer") and the app ended with EXC_BREAKPOINT.
accesskit_macos 0.27.2 fixes this (AccessKit/accesskit#835), but egui 0.36
is on accesskit 0.24, so vendor 0.26.3 with 0.27.2's src/subclass.rs and its
tests: the adapter leaves the class alone when KVO subclassed the view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8894
Co-authored-by: Cursor <cursoragent@cursor.com>
* Web: load Simplified/Traditional Chinese fonts for zh and zh-TW (#8894)
BIZ UDPGothic only covers Japanese, so Chinese UI showed tofu. Ship locale-glyph Craft UI SC/TC subsets and fetch the matching face on demand.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #8980
Hide constraint glyphs when zoomed out (claim).
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* Sketch: hide constraint glyphs when zoomed out (#8980)
Fixed-size constraint glyphs stayed visible at every zoom and cluttered the
view when far out. Hide them below a sketch-plane scale threshold, with the
old always-on behaviour behind hide_constraint_glyphs_zoomed_out.
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* i18n: complete-catalog strings for zoom-hide preference (#8980)
Add ar/he/vi translations for prefs.hide_constraint_glyphs_zoomed_out
(and its note) so cargo xtask i18n --check no longer reports 6 gaps in
complete catalogs.
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
---------
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
Native compilers inline every call, and `main` inlined 33 BVH walks: three
sample_path calls, and a shadow walk per light source family. NVIDIA's
compiler (driver 610.88) crashed in nvgpucomp64.dll or ran out of memory.
- main settles the adaptive budget first, then samples at one call site.
- direct_light takes over direct_studio, visible and the fixed-light loop:
one loop over the sources with one shadow-ray call site, drawing random
numbers in the same order.
- next_vertex (a select) replaces (a+1u)%3u: after a BVH walk that index
crashed NVIDIA's compiler within seconds.
main now inlines 5 BVH walks; main_inlines_few_bvh_walks counts them with
naga, so the limit holds without an NVIDIA GPU.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Problem: every state of a saved model wrote the evaluation key of each sketch before it, so a
design of many sketches and many features after them repeated the same map over and over. In
the SELENE rover (5,484 features, 2,116 bodies) that was 27 of the 33.5 MB manifest: the
manifest hit its 32 MiB limit, the save thinned the cache (#3220) to 2,140 of 5,484 states, and
every open evaluated the 3,344 left-out features again. Reading the kept states one after
another took a few seconds more.
Solution: as for sheet bodies (#6152), the records keep a list of sketch-key sets, each distinct
set written once, as the keys it sets and drops relative to the set written before it; a state
names its set by place. A thinned model keeps the whole list and counts it once against its
budget. The reader counts every set's keys, and each state's, towards MAX_HELD before it copies
them (a short record can stand for a large set), then builds the states on threads
(kernel::map_on_threads) once the shared records are read. The cache format is now /5: an older
cache is a miss and the design is evaluated.
SELENE's manifest is 15.9 MB with every state kept; opening it evaluates nothing. Parse and
evaluate on opening, release build, median of 5 on a shared machine: 7.36 s -> 1.14 s. The
evaluated bodies are identical (inspect.measure of all 2,116 bodies).
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
* claim: #5574
* Pick hidden geometry near long clicks in a five-row list (#5574)
* fix: make Select Other configurable and fit its list to the window
---------
Co-authored-by: Kirill Frolov <k.a.frolov@vk.team>
* claim: #7168
* Saved model cache: keep fast opening after an update (#7168)
The model cache was read only by the exact build that wrote it (same app
version and commit), so every update evaluated every design again on its
first open. It is now keyed by the evaluation source instead: a digest of
the committed source the model is computed from (doc and the workspace
crates it is built from, the patched truck crates, locked external
dependencies, workspace build settings without the version, and the
cache reader), with the platform. An update that changed none of that
opens designs from their cache; one that changed any of it evaluates
them again, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7944
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Theme: System follows the desktop's dark/light setting on Linux (#7944)
On GNOME (Wayland, or X11 through XWayland) the window toolkit never reports
the desktop's dark or light preference, nor its changes, so Theme: System kept
its colours. The Linux app now reads org.freedesktop.appearance color-scheme
through the XDG Desktop Portal's Settings interface (then GNOME's color-scheme
and gtk-theme when it has no preference) on a thread of its own, follows the
portal's SettingChanged signal, and falls back to gsettings or a slow poll.
The window reads the answer through Services::desktop_dark; the decision from
the raw values is prefs::desktop_prefers_dark. Windows and macOS keep the
window toolkit's theme.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8429
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Print face: Send to Slicer lays a body on its marked face (#8429)
A body can have one flat print face (Document::print_faces, held by the
certified target a sketch on a face holds). body.print_face {body, point?}
marks or clears it. Send to Slicer, Save Mesh with a slicer and EasyPrint
turn and move the exported copy so the face lies on the bed at Z = 0 with
the centre of mass over the origin; a face that can't be found is a
warning and that body is exported as it lies. Move/Copy and Mirror give a
copy its source's print face. One pending format file; the command
has its own icon (print_face).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Print face: Ctrl+B, the face menu and the Send to Slicer row (#8429)
Ctrl+B and the face context menu mark the selected flat face as its
body's print face, or clear it. Send to Slicer shows the print face of
the one body being sent in a Print face input, takes a flat face picked
in the viewport and clears it when emptied.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Print face: a light tint in the viewport and its strength in Preferences (#8429)
Each visible body's print face is tinted towards the theme's section
colour and outlined, at the strength set under Preferences > General >
Slicer (print_face_highlight, 0 to 1, 20 % by default; 0 hides it). The
user guide describes the print face, and the known limitation after a
shell of a shelled body is listed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9118
* Agent chat window: an off-screen chat window no longer stalls the main window (#9118)
The chat popped out into its own window is an immediate viewport: eframe draws
and presents it inside the main window's frame. Both surfaces waited for vsync,
and a Wayland compositor sends no frame callbacks to a window it isn't showing,
so the main window stalled behind the chat window's present.
A surface other than the main window's is now configured with Mailbox, else
Immediate, when the configured mode waits for vsync and the surface offers one
(viewport_present_mode in the vendored egui-wgpu). The main window keeps vsync
and still paces both.
* claim: #8718
* Browser: the eye sits in a column at each row's right end (#8718)
Tree rows draw the visibility eye right-aligned at the row's end, clear of
the fold arrow and the radio and of a floating scroll bar; names stop short
of it. Preferences > Interface > Eye next to the fold arrow
(browser_eye_left) keeps the old position. Rows report their control
positions so placement handles and inline rename follow the layout.
* Docs: the browser's eye column and browser_eye_left (#8718)
* Browser: the eye's tip shows by the eye at the row's end (#8718)
* Browser: a gap keeps the fold arrow and the radio apart; the eye clears a floating scroll bar (#8718)
The eye's old slot leaves a 10 pt gap instead of 4 pt, so the radio's hit
area is 7.5 pt from the fold arrow's and History pattern rows step in from
their sketch as far as browser children do. The eye's inset follows the
scroll style: only a floating bar laid over the rows takes room. Rows
publish indent:<label> where their depth puts them.
* Tests: browser depth checks run on the default layout, by indent handles (#8718)
* claim: #8993
* Reverse zoom direction no longer flips 3D mouse zoom (#8993)
The checkbox sits under Wheel and trackpad and now reverses the wheel
(and the navigation bridge's wheel-style steps) only. The 3D mouse cap
zooms by its own per-axis invert switch alone: device_camera no longer
takes a reverse_zoom argument, nor does the test model in Preferences.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8390
* Sketch modify: pick a whole profile or chain for the shared Entities input (#8390)
- Click inside a closed profile selects its whole boundary (and its holes);
double-click a curve selects its whole chain, for Mirror, Move/Copy, Scale
and the patterns. Single curves and points keep working as before.
- The mirror line may itself be among the entities: the command leaves the
line in place and mirrors the rest, instead of rejecting it.
* Mirror: the shared line case is valid, not an error (#8390)
Update the half-filled-window test: a mirror line that is also among the
entities is now accepted (the command leaves it in place and mirrors the
rest), matching the engine.
---------
Co-authored-by: Dane Doubell <2853036+danedoubell@users.noreply.github.com>
* claim: #8908
Co-authored-by: Cursor <cursoragent@cursor.com>
* Update Cancel clears the UI and stops before checksum downloads.
Drop the install job as soon as Cancel is pressed so Downloading ends
immediately, and check the cancel flag around feed refresh and
checksum GETs so a stall before the package body no longer ignores it.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* Assistant composer: the input box fills its area, and the hint stays on one line
The composer footer inset the box by its own margin on top of the box's text
padding. The footer now has no margin, so the box spans it on all four sides and
only the text padding remains. The hint is painted on a single row, cut with an
ellipsis when the panel is narrow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assistant composer: the hint takes its colour from the theme, not a literal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon drop-downs as a grid of large icons, as an option (#4739)
Preferences > Interface gets two settings, both off by default:
- Menus: List | Large icons. With Large icons a panel's drop-down shows its
commands as rows of up to five icons at 32 px (twice the list's), keeping
the list's group headings and order. The name, shortcut and help are in
the tooltip, as on a ribbon button. Arrow keys move across and between
rows; a click starts the command; right-click and drag pin it as before.
Resting on an icon for two seconds arms a pin in its corner; a quicker
click anywhere starts the command, so nothing is pinned by accident. A
pinned command shows its pin.
- "Leave pinned commands out of the drop-down menus": a drop-down (list or
grid) leaves out the commands the ribbon shows as buttons; a panel too
narrow for its buttons lists them again, and a menu is never left empty.
No icon artwork or colours change. Sketch > Create keeps its family list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch > Create in the large-icon grid: every variant under its family (#4739)
With Menus: Large icons, Sketch > Create showed its family sub-menus as
plain text rows (Line, Rectangle, Circle, ...), unlike every other menu. It
now shows every variant as a large icon under its family's heading, then the
other tools under "More". The list keeps its family sub-menus.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: groups side by side, no footer (#4739)
A menu of two or more headed groups (Sketch > Create's families, Model >
Modify's Edges, Faces, Bodies, Specialise) puts the groups side by side, each
heading over a column of its icons, at most two across. Menus without groups,
or one too wide for the window, keep rows of up to five. The pinning note
under the large-icon menus goes: the tooltips and right-click menus say it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: a separator line between groups side by side (#4739)
As between the ribbon's sections: a 1 px line in the theme's border colour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: at most three rows, growing to the right (#4739)
A menu fills five columns, more when that would take over three rows (Model >
Create: 7 x 3); in grouped menus a group too big for three rows gets more
columns. Only a window too narrow for that wraps into more rows. A test checks
every panel's menu of every tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: group headings centred over their icons (#4739)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop-down group headings: smaller than the drop-down's header, not in capitals (#4739)
Edges, Faces, Bodies (and Sketch > Create's families) were drawn in capitals
at font_small, which reads larger than the drop-down's own header
(font_caption). They now use font_micro, written as named, in the list and the
large-icon grid. Review feedback on #5012.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: start a command from the grid at its icon, as main's rows do (#4739)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon icon grid strings: a pending locale file, with ar, he and vi (#4739)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: commands in no group stand apart, so a left-out group doesn't move them (#4739)
With Convert to Sheet Metal pinned and left out of Model > Modify, its
Specialise group went and Delete, in no group, moved under Bodies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9332
* Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332)
`sinh`, `cosh`, `tanh` and `asinh` take a unit-less number and give one,
as `exp` does; `acosh` refuses x < 1 and `atanh` refuses |x| >= 1, worded
as `asin` and `ln` refuse what lies outside their domain. They are in the
expression help (`FUNCTIONS`, the parameter autocomplete), the
hostile-expression fuzz tokens, the parameters and equation-curve guides,
and the checking skill's list of functions. Horn flares (Salmon's hypex
`cosh h + T sinh h`), catenaries and the tractrix can now be written as
they are stated instead of expanded into `exp`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6896
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
* Sketch: find profiles island by island and say when the search is cut short (#6896)
Every live drag frame ran the profile search over the whole sketch: every
spline piece of a large imported logo was sampled, checked for crossings
and traced again, about 100 ms per frame at 6,000 degrees of freedom.
Profile curves are now split into islands whose enlarged piece boxes do
not touch (the margin exceeds every tolerance the search uses), each
island's loops are found on their own and cached by a fingerprint of its
geometry, and the loops are nested into profiles over the whole sketch in
the order a single search finds them, so profiles, ids, holes and
whole-boundary certificates stay the same. The end-near-crossing lookup
covers its whole reach, independent of the grid's cell size.
The 50,000-piece limit now holds per island, and a sketch that still
exceeds it gets a warning instead of silently missing profiles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`schema::issues(id, params)` looks up the command's typed contract and
lists what is wrong with the parameters (none without a contract or for
an unknown id). The batch preflight, the MCP bridge's pre-send check and
the app's check of a design-switching command each did that lookup
themselves; they now call it. No behaviour change.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
sketch_consumed knew Extrude, Revolve and the sheet metal flanges but not
a Hole drilled at a sketch's points, so that sketch stayed drawn inside the
holes. A Multiple hole now counts as using its sketch; Edit Feature shows
its points while the dialog is open. Single holes keep their sketch shown,
since a hidden sketch offers no points to snap to.
* claim: #9299
* Recover unsaved design?: Discard all, with a confirmation (#9299)
A Discard all button at the left of the window's footer, away from Later.
It asks first ("Discard 7 autosaves? This cannot be undone.", Discard all /
Cancel), then discards every listed autosave the way its own Discard button
does (doc.recovery_discard on each id). Cancel goes back to the list
unchanged. The button publishes the handle recovery:discard_all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9265
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Preferences: a setting in a row with no label is found by the words it shows (#9265)
A search hid a row by its label before its controls were drawn. Seven checkbox rows and two segmented rows on the Interface page have no label, so "status bar", "search results" and "reveal on hover" found nothing. A hidden row with no label now keeps the words of its controls, as a dropdown keeps its value, and is drawn when they match. Each such row has a key of its own, so its neighbours are not drawn with it.
Co-Authored-By: Claude Code <noreply@anthropic.com>
---------
Co-authored-by: Claude Code <noreply@anthropic.com>
* claim: #9195
* Viewport: an opened design is framed at the home view, in the middle of the view (#9195)
A fit the viewport cannot frame yet is kept and asked again on the next frame instead
of being consumed and lost, so a design opened from the Home screen or by launching on
a file no longer comes up at the default camera, wherever its own coordinates put it.
Framing then centres the model on the view rather than on the free rectangle between
the floating controls: `Layout` carries `middle`, the view without the panels, computed
before the compass, the navigation bar and the OK/Cancel corner join the obstacles. The
model is still sized to `drawable`, so it stays clear of every control, but only a panel
moves it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Viewport: keep the centred fit clear of the controls, and frame --sample (#9195)
The fit framed the model into a rectangle the size of `drawable` centred on `middle`, which is
not inside `drawable`, so the model could sit under the compass, the navigation bar or the
render product frame. The model is now sized to `drawable` as before, and only the room left
over in it moves the model towards the middle of the view.
`s27_move_triad` turns the Z ring on its far side: the model now sits further right, and the
Move dialog that docks on the right afterwards covered the ring's old grab point.
A launch with `--sample` builds the design straight into the session and never asked for a
fit; it now comes up at the home view, framed, like an opened design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport tests: the cursor orbit's pivot keeps the pixel it was picked on (#9195)
With the model now centred on the view, one of the test's perspective drag points lands within
the pick tolerance of the box's top edge, and the pick snaps the pivot onto that edge, a few
pixels from the cursor. The orbit keeps that point still, as it should; the test compared it
with the cursor instead of with where it started.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Both commands need a choice, but start_with_variant_memory only special-
cased the parameterless display toggles, so a click on the ribbon (or
command search, a shortcut, ui.start) ran them with {} and showed only
the engine's "style must be ..." / "tool must be ..." error.
They now open a short menu, the way Units does: under the ribbon row
that started it (a second click closes it), or in the middle of the view.
Visual style lists the four styles with the current one checked; the
Navigation tool lists Orbit, Pan and Zoom, and picking the latched one
releases it, as its navigation-bar button does. The four styles come
from one list shared with the navigation bar's menu.
A sketch that failed (a dimension set negative by a parameter) left every
feature built on it with "unknown sketch 1 (it must come earlier in the
timeline)", which points at the timeline order. The evaluation now notes
the features that failed earlier in the pass, and a feature whose input
sketch is one of them fails with "sketch `Sketch1` failed: <its error>".
That result is never cached, since the cache key holds neither the
sketch's name nor its error: a second failing value or a rename shows
up at once.
A page window (Preferences) filled its frame with
dialog_body.gamma_multiply(0.97), which also scales the alpha, so the
ribbon's labels showed through its title bar, search field and heading.
It now uses the opaque dialog_body, as every other window does; the
navigation bar keeps its own translucent resting fill.
* i18n(uk): add pending translations for missing strings
* i18n(uk): add pending translations for new strings from upstream
* i18n(uk): improve pending translations
* i18n(uk): professional translation of all pending strings
* i18n(uk): finish the pending translations for 29 October
Every value in uk-sync-29oct.json is now Ukrainian except the seven symbols
and formulas that must stay unchanged: the modifier keys, HDR and the three
inertia tensors.
Terminology follows uk.json: spot light is "прожектор", directional light is
"спрямоване", body is "тіло", render is "рендеринг". Camera orientation keeps
тангаж, рискання and крен.
Removes history-origin-bodies.json, which was empty after its content moved
into this file.
- worst_status searched the history and the results for each feature of a folded folder, the square of the history's length every frame
- A folder of 16 features or more now finds places and results in tables built once, first of an id winning as feature_index and Model::result do
- Frame on a 4,880-body design: 20.4 ms -> 7.9 ms (M4 Max, release, headless)
- Test a_folders_mark_is_the_worst_of_its_features_own
Co-authored-by: P'tite Tête <asso@ptitetete.com>
A new user guide page, Equation curves, under Sketching: the first curve step by step, Explicit and
Parametric explained with tables of rules to type (a line, a parabola, a wave, a circle, a spiral),
radians, parameters with the involute of a base circle, building a part (a closed flower curve
extruded), editing, and common mistakes. The technical details stay in a short section for scripts
and agents.
Seven pictures, rendered by `cargo xtask book` from new scripts in docs/book/scripts/equation-*.json
(gitignored output, attributed in attribution/pending/docs-equation-curves.md). The Sketching page
keeps a short summary and links to the new page.
* claim: #9184
* Control channel: a request's own param_check level, applied and confirmed by the app (#9184)
`engine.execute`, `engine.batch` and `engine.script` take an optional
`param_check: "off"|"warn"|"strict"` in their params. The app runs the
request at that level through the same `run_checked` path and batch
preflight a headless session uses, puts its own level back, and every
reply says the level it ran at as `param_check` beside `ok`. A command
that switches designs keeps the app's level; any other word is refused.
Readings and exports answered on a copy off the window thread keep the
level too.
`control.capabilities`, answered at once on the control-server thread,
lists what the channel does beyond the methods every version has:
`{"param_check": ["off", "warn", "strict"]}`. An older app answers
"unknown method".
The MCP bridge asks it once per connection. When the app lists the
level, every call and batch goes with it and the app checks against its
own commands; otherwise the bridge checks before sending, as #9073 does.
At strict, a reply that doesn't say the app checked the call is an error,
and the next calls are checked by the bridge. Also: `add_param_warnings`
takes the reply by `&mut`, and `with_param_check` sits beside
`Remote::new`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Control channel: a design-switching command is checked at the request's level
Review fixes for #9184. `component.edit_in_place`, `component.finish_edit`,
`view.next_tab` and `view.previous_tab` ran at the app's own level and
echoed `off`, so a misspelt call went through at strict. They now have
their parameters checked at the request's level before they run (and
still run at the app's own level, as each design keeps its own), and the
reply echoes the requested level. The MCP bridge at strict now requires
the echo to match its level, not just to be there. `param_check` is read
only by `engine.execute`, `engine.batch` and `engine.script`; other
methods ignore it. The off-thread test now shows the design change
computing off the window thread before it is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch corners: a round that would use up a whole arc is refused
A quarter arc of radius 5 running into a line along it, rounded with
radius 5, put the round's tangent point at the arc's other end and left
an arc of no length. round_corner now skips a round whose tangent point
falls on either curve's other end; with none left it says that radius
does not fit, as for two lines (found by a local trim fuzzer).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch corners: a round where the curves meet smoothly is refused
A line running on from an arc's end along its tangent (off only by rounding)
has no corner, but the round's tangent points landed within 1e-7 mm of it and
the round came out as an arc of no length (found by a local trim fuzzer). The
corner test's line met its arc this way too and was checking that output; it
now meets the arc at a corner.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9179
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* sketch.inspect: each profile loop names a curve once, not once per segment (#9179)
A profile records one curve id per piece its loop walks, and a conic or
spline is walked as many short pieces, so sketch.inspect listed a single
Bezier curve 50 times in a profile's `curves` and as often in a hole loop.
The reply now names each curve of a loop once, in the order the loop walks
them (solidcraft_sketch::distinct_curves, as delete and profile references
already do). The solved profiles keep their per-piece lists.
The lists are now a profile pick as they stand: a whole_boundaries pick
refuses a curve named twice, and the regression test extrudes the wall
from the reply's lists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
An SVG import leaves a sketch with regions and no body. The marquee (box select) took only the bodies, so the imported geometry was unreachable with the selection tools: a marquee over it selected nothing, and a click on a region did not take it either.
The marquee now takes the regions of the shown sketches when the design has no body. A design that already has a body keeps the old exclusive behaviour: the marquee takes the bodies alone, not the regions of the sketches that are shown. A dialog that asks for edges or faces (the Patch dialog) never takes the regions: they are neither.
* claim: #2829 (construct.* contracts)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Typed contracts for the construction axes, points and planes
The 19 construct.* commands get input contracts and FeatureResult as
their output, with shared types for references, planes, a plane or
face base, an axis line and a construction plane's name, each calling
the reader its handler uses (split out of geo, plane_param, the face
capture and named_axis_line).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9188
* Preference: keep the view when a sketch opens, Look At faces it on request (#9188)
Preferences > Sketch > "Turn to face a sketch when it opens" (on by default,
so nothing changes unless it is turned off). Off: creating or editing a
sketch leaves the view as it is, a sketch started on a face no longer
re-centres on the picked point, and Look At (the palette button, Ctrl+8)
still turns to face the sketch. The control channel sets it as
`ui.prefs {"sketch_open_look_at": false}`.
Changes a default: no
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9087
* fix(#9087): ui.home refuses a sample index that names no sample
The control channel passed the sample index straight to open_sample, which drops an index that names no sample and says nothing. The request then replied ok, so an agent could not tell a typo from a sample that had opened.
The index is checked before it reaches open_sample: an index that names no sample is refused with the valid range in the error. A sample that exists still opens, as before.
* claim: #9086 (edge lengths)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: an exact circle's or arc's length agrees with its circumference (#9086)
Measure gave a circle's or an arc's length_mm as the length of the
polyline drawn for it, which runs inside the curve, while the same reply
gave its circumference or arc_length from the exact circle. When the edge
is known exactly (the kernel's circle, or a sketch's own circle or arc),
length_mm is now its radius times its angle. A circle fitted to a mesh
body's polyline keeps the polyline's length.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9029
Co-authored-by: Cursor <cursoragent@cursor.com>
* Square sketch axes when looking at a turned plane (#9029)
Look At only yaw-aligned sketches facing world up/down, so a sketch on a rotated component stayed tilted on screen. Roll (or yaw at the poles) so the sketch's x runs right and y is upright.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #9108
Co-authored-by: Cursor <cursoragent@cursor.com>
* Canvas calibrate: pick Point A and B with viewport clicks (#9108).
The Calibrate card only had typed coordinates, so users could not mark the image. Clicks on the canvas now fill A then B, with on-image markers and a short hint.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Calibrate canvas: ja/zh/ar/he/vi strings for the click hints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Persistent naming: a proposal from a second implementation
A design proposal for the persistent-naming failures still open (#4341,
#5198, #5308, #5857, #5858, #5860, #5861), from building persistent naming
in Form Studio: fall back by lineage, never by geometry alone; a suppressed
maker is not a lost reference; names saved as structured one-level values;
ordinals from the feature, not the kernel's face order; split picks resolve
to all pieces; body identity apart from the display name. Documentation
only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Persistent naming proposal: body identity follows the #5308 plan
Change 6 now agrees with bluecmd's plan on #5308: an id minted from
next_id and stored per feature slot, better than the derived identity
the first version proposed. It adds that a stored id is only as stable
as the slot assignment, which today follows each lump's least face
name, and gives the lineage signature from the #5308 discussion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4515
Co-authored-by: Cursor <cursoragent@cursor.com>
* Inspect: keep analysis legends clear of a left History (#4515).
Draft, Accessibility and Curvature legends were painted at the viewport's left edge under a left History sidebar. Place them in the free workspace content instead.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
offscreen_device() asked wgpu for its default adapter and ignored the
SOLIDCRAFT_GPU policy that headless pictures follow, so with
SOLIDCRAFT_GPU=software the ui-egui offscreen tests still opened the
hardware GPU. Under hardware or software the adapter now comes from
solidcraft_gpu::select (new pick_among, which pick uses too); under cpu
there is none; unset (auto) keeps wgpu's default adapter as before.
Part of #9040.
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9147
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the Sketch Grid box in the Sketch panel turns the sketch's grid off (#9147)
The box sets the open sketch's hide_grid, but the viewport drew the grid
whenever a sketch was open, so hide_grid only reached the ground grid and
the box did nothing. An open sketch now shows its grid whatever the Grid
switch says, unless its own Sketch Grid option is off; the window guides
that renders and the control channel use follow the same rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Release 0.27.1
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render job test: wait for the cancelled job's reservation to be released
The worker drops a job's reservation just after the job turns terminal, so
checking admitted bytes right after wait_timeout raced (10 of 40 local runs
failed). Poll with a deadline, as dielectric_tests does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7521
* fix: headless pictures return their draw counts with the picture
`the_renderer_counts_what_it_draws` drew with `Capturer::rgba` and then
read `Capturer::last_stats()`. The capturer is shared with the binary's
other tests, which draw on it from parallel threads, so another picture
could land between the two calls and the test read its counts (e.g. 10224
triangles for the empty design).
`Capturer::rgba_with_stats` returns the picture and its counts, read while
the call still holds the device. `last_stats()` is removed; this test was
its only caller (the performance overlay reads the viewport renderer's own
stats handle).
New test `pictures_drawn_at_once_each_count_their_own` draws empty and box
designs from eight threads on the shared capturer. Against the old pair it
failed 25 of 40 full runs of the `capture` binary; it passes with the new
call.
* fix: a headless picture waits for its read-back's answer
A picture maps its read-back buffer, waits for its submission with
`device.poll(PollType::Wait)`, and then checked once with `try_recv`
whether the map callback had run. wgpu calls a finished mapping's
callback from whichever thread next maintains the device, in a poll or
in any `queue.submit`, after it lets go of the device. When another
thread got there first, the wait returned with the mapping done but its
callback not yet called, and the picture failed with "not supported yet:
reading a picture back without waiting for the browser", the error meant
for a browser.
On the shared capturer, the other thread is another picture's device
check (`probe_lost` submits nothing before it takes the capturer's lock),
so the `capture` tests failed now and then: `bad_picture_sizes_are_errors`
(its last 8 x 8 picture), `pictures_show_a_plain_cut_without_the_hatch`,
`pictures_blend_a_line_that_is_not_opaque`. In the app, the window's
frames are submitted on the device its thumbnails and `ui.render`
pictures are drawn on.
A native picture now waits for the answer, up to the picture timeout; a
browser still answers later, on its own.
New test `pictures_read_back_while_another_thread_uses_the_device`: 2,000
small pictures while another thread polls their device. Without the fix
it failed 19 of 20 runs (1 to 7 pictures each); with it, 150 of 150 runs
pass. `bad_picture_sizes_are_errors` now prints the error it gets.
* Sketch: snap where two recent centre and midpoint guides meet (#8694)
The alignment guide remembered one reference and did not move the cursor. Keep the previous centre or midpoint as well, and snap a drawing point to where their guides cross.
* Sketch: keep the recent-guide crossing snap off until asked (#8694)
The crossing snap was on whenever alignment guides were. Give it its own Sketch preference, off by default, so the guides stay visual until someone turns the snap on.
* Sketch recent snap: ar/he/vi strings and clippy borrow fixes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9072
* MCP: --param-check checks calls to the running app (#9072)
`mcp --connect` (and `mcp` once it bridges to an app) took
`--param-check` and forwarded every call unchecked, while the app's own
session is always off. `Remote` now checks each `engine.execute` and
`engine.batch` against this server's command contracts before sending:
`strict` refuses a call, or a batch with such a step, without sending
anything, and `warn` adds `param_warnings` to the app's reply (each
step's result in a batch). A command with no contract here goes to the
app unchecked. `Auto` carries the headless session's level over when it
bridges to a late app. `batch_preflight::contracts` is the contract half
of the existing preflight, for a runner in another process.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Fold the pending design format changes (sketch-equation-curves, timeline-joint-folders) into format 44.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
theme::apply always sets egui's theme to light or dark, and egui's own window
sync then told the native window to be light or dark. A macOS window told so
keeps that appearance and no longer reports the system appearance changing,
so with Theme set to System the app stayed light after macOS turned dark. The
app now syncs the window itself: the system's appearance while the theme
follows it, the theme's own otherwise (for the title bar).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9025
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Sketch: an old edge-on projection keeps its line when it is re-resolved (#9025)
A face seen edge-on was saved as two lines on the same two points, one each way, and is one line now. Re-resolving the link dropped both lines and built a new one under a new id, so an offset that names the first line as its source failed with "an offset source vanished or changed shape". Keep the first line and drop only the second.
Co-Authored-By: Claude Code <noreply@anthropic.com>
---------
Co-authored-by: Claude Code <noreply@anthropic.com>
The check for a constraint that shrinks a curve to a point took under 1e-6
for a point. One solve could squeeze a 49 mm side to about 1.2e-6 mm and
the next take it the rest of the way, so neither solve tripped it (two
rectangles' corners made coincident, found by a local sketch fuzzer). Under
1e-5 now counts: in 4000 random sketches the constraints that still
collapsed a line went from 9 to 0, and every refusal rate stayed the same.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9015
Co-authored-by: Cursor <cursoragent@cursor.com>
* Evaluate bare length offsets in the design's units (#9015)
Feature expressions like baseLength - 1 were subtracting millimetres because val() parsed with mm defaults and only applied design units to a final unit-less result.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #6921
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CLI: run refuses unknown options and takes --param-check (#6921)
`solidcraft-cli run` now checks its options through `known_args`, so a
mistyped option fails instead of being ignored, and takes
`--param-check off|warn|strict` with the MCP server's words and default
`off`. `warn` prints each unknown key with a suggestion on stderr and
runs the step; `strict` stops at that step and writes nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CLI: run's option check takes --param-check; warn on timed runs as steps complete
`run` keeps #6919's (#6918) unknown-option check, with `--param-check`
among the options that take a value. `Session::run_script_timed` now
takes the same per-step callback as `run_script_each`, so `run --timings`
or `--profile` at the warn level reports a step's warnings even when a
later step fails, instead of after the script (and not at all on a
failure).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8644
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web: open tabs share settings changes, so one tab no longer undoes another's (#8644)
Every open tab of the web app saved its whole copy of the settings to the
same browser storage, every 30 s and on focus loss, so a tab still holding
old settings put them back over a toolbar change made in another tab.
A tab now writes its settings in the frame they change, and the other open
tabs load them from the browser's storage event, so their own saves keep
them. Settings loaded that way aren't written back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9016
Co-authored-by: Cursor <cursoragent@cursor.com>
* UI: keep Distance entry under Preferences and Report a bug (#9016)
Canvas value boxes used Foreground order, so they covered system windows. Draw them as Background chrome instead.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* Sketch Trim: a cut at a curve's own end leaves no piece of no length
A curve that ends where another one ends crosses it there only within the
intersection's tolerance (1e-6), but bracket dropped cuts at the curve's
ends only within 1e-9 of its parameter range. A line ending on an arc's end,
trimmed from its other end, was cut a hair inside its own end and kept a
piece about 1e-7 mm long (found by a local trim fuzzer: 78 such trims in
4000 sketches, and 8 breaks). bracket now also drops a cut within that
tolerance of the curve's ends, as add_cut merges cuts that close together.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Extend: a touch at an arc's growing end is that end, not a stop
An arc whose end is where a line ends that touches the arc's circle there
found the touch a hair beyond the end (within the intersection's tolerance),
stopped on it, and added an arc from that point to itself. A hit within that
tolerance of the growing end (1e-6, as for the far end) is now the end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A constraint whose only solution squeezes curves to a point (a rectangle's
corner made the midpoint of its opposite side, or two opposite corners made
coincident) collapsed the whole rectangle while the sketch said solved. A
solve that shrinks a line or circle from over 1e-3 to under 1e-6 now counts
as one that fails, as one that throws points far away does: a strict edit is
refused, another keeps the sketch from before its solve, and the free solve
after the held ones in apply_in_order refuses the constraint.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Skip drawing and interaction for history chips outside the strip's visible part, after their slot is recorded
- Keep a dragged or focused chip, and every chip while a popup is open
- Frame on a 4,880-body design: 20.3 ms -> 14.6 ms (M4 Max, release, headless)
- Test a_long_timeline_paints_only_the_chips_in_view
Co-authored-by: P'tite Tête <asso@ptitetete.com>
On a Windows account whose %TEMP% is a short (8.3) path, such as
C:\Users\MATHEU~1\AppData\Local\Temp, three tests failed because they built
their folders from std::env::temp_dir(), and the agent file scope refuses short
names ("not allowed for this agent: short (8.3) names such as `PROGRA~1`"):
- engine: cmd::render::settings_tests::embedded_hdr_capture_rejects_parameters_scope_and_cpu_primaries_without_mutation
- ui-egui: agent_chat::tests::file_actions_wait_for_the_user
- ui-egui: agent_chat::tests::permission_modes_decide_what_asks
They now use vfs::temp_dir(), which spells the folder with long names, as
libraries_tests and motion_tests already do (#1385, #1211).
Checked on Windows 11 x64 with the 8.3 TEMP: the agent_chat and
render::settings tests (113) pass, and clippy -D warnings is clean for both
crates.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7287
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Command search: show a command's place in the ribbon, also inside section menus (#7287)
Hovering a command result in Search commands switches the ribbon to the command's
tab and marks its button with its tooltip; a command that has no button there
opens its section's drop-down on its row instead. Leaving the results (or closing
the box) goes back to the tab the user was on, so pressing S, typing and Enter
works as before.
Starting a command from the box makes its button or section label blink twice,
and a command started from a section drop-down marks that section's label while
it runs, like a pressed button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Command search: the ribbon reveal is a preference, off by default (#7287)
Preferences › Interface › Show search results in the ribbon (`ribbon_reveal`) turns on the hover
preview, the blink after a start and the running mark on a drop-down's panel label. Off, the
ribbon behaves as on main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Arabic, Hebrew, Japanese, Vietnamese and Chinese for the ribbon reveal setting
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #7912
* Sketch: dimension a sketch entity against a model edge
A dimension took sketch entities only, so measuring a sheet-metal body's edge
was refused with "cannot dimension that combination of entities". The
entities now take a model reference too, an {edge: [x,y,z], body?} or a
{vertex: [x,y,z], body?}, which is projected into the sketch first, as the
constraint commands' operands are since #6348, and measured there.
The Dimension tool picks a body's edge or vertex when the sketch has nothing
under the cursor, and reads the pick back into the reference the command
takes.
* style: rustfmt the sketch dimension command
* Cap the entities one call may project
A dimension projects the model references among its entities into the
sketch, one link and one resolve each, and the loop had no cap: a single
request could make the engine resolve thousands of model edges before
the dimension refused the list. The count is now refused before anything
is projected, and the projection loop stops at the same limit the
Project command uses.
* Sketch dimension on a model edge: use the sketch store after the store refactor
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The cursor correction tries the constraints' free directions a whole step at
a time and took a step as soon as the cursor's distance fell, by any amount.
Along freedom that can't reach the cursor (the far end of a line held only
by its direction), retracting onto the constraints still moves the cursor by
rounding, so such steps were taken: the end walked away a step at a time, and
a line measured by an angle could shrink to nothing, as in #7635. A step now
has to move the cursor itself by more than the solve's tolerance.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6237
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: save, switch, export and import input and interface settings (#6237)
A profile keeps the Interface, Navigation and Sketch preferences (mouse mode,
radial menu and gestures with every studio's lists, theme, scale, font, ...),
the language, the keyboard shortcuts, the toolbar, the S box favourites and
the imported theme it uses under a name. Machine-specific settings stay out
(3D mouse, graphics, units, AI, recent files).
- Preferences > General > Settings profiles: choose the active profile to
apply it, Save, Rename, Delete, Export... and Import...; a note shows when
the settings differ from the saved profile; Cancel takes a switch back.
- settings.profile.{list,save,apply,rename,delete,export,import} commands for
the control channel, palette and scripts; the engine checks the parameters,
the app does the rest.
- One `solidcraft-profile/1` file; import checks the format and name, drops
unknown keys and unreadable values, caps sizes, never switches, and never
panics. Each preference is applied through prefs::set, so a value this
computer refuses keeps its current one and is reported.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Glossary: settings profile, and "profile" among the words with more than one meaning (#6237)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: new strings in a pending locale file, not the catalogs (#6237)
New UI strings now go to assets/locales/pending/ (CONTRIBUTING.md), so
this pull request no longer edits the shared catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences snapshot: compare the toolbar, favourites and profile too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: keep a command's several keys (#6237)
Since a command can have several keys (#6288), the keymap saves a list where it has more than
one. A profile's checks only took a single key, so saving or importing a profile dropped such a
command's shortcuts. They now read the keys as the keymap does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: Arabic, Hebrew and Vietnamese strings (complete catalogs) (#6237)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Tripper <tripper@localhost>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #8927
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: a pre-selected sketch line lying on a body edge goes in as that edge (#8927)
With a finished sketch shown, a click on a body edge that one of its lines
lies on picks the sketch line. Fillet and Chamfer take edges and no sketch
curves, so the pre-selection found no input to fill: the tool opened with
Edges empty and the selection was dropped, and only a second click with the
tool open (which picks the edge) made it work.
When nothing in the dialog takes a pre-selected sketch curve but an input
takes edges, look for the body edge the curve lies on from end to end
(display polylines, with room for a curved edge's chord sag) and take that
edge instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Preferences > Graphics > Viewport gets a Field of view row under Perspective view: the UI kit's
slider in degrees, 15 to 90, dragged or typed and kept to whole degrees, enabled only while
Perspective view is on. The preference is perspective_fov, in radians (default 0.6, about 34°,
so the default view draws exactly as before), and Restore Defaults puts it back.
One place decides the angle the view is drawn with: SolveApp::view_fov(), the preference with
Perspective view on and 0 with it off or while a sketch is open. A saved value outside 15°-90°
reads as the default. projection and fit_bounds read it (fit_bounds' second hard-coded copy of
the 0.6, tan(0.3), now goes through Camera::half_height), and so does the headless fit.
perspective_view() stays, as view_fov() > 0, so #4291 needs no change.
When the angle changes from one perspective angle to another, the camera's distance scales by
tan(old/2) / tan(new/2), with a running view animation's ends, so the target keeps its size and
the slider changes the depth, not the zoom. prefs::follow_view_fov does it once per frame and
after ui.prefs, Cancel and Restore Defaults; a parallel view keeps the last perspective angle,
and while Render is open the camera is Render's own, so the change waits for the design view.
The Render workspace's Perspective check box turns perspective on at the preference's angle,
not π/4; a saved render setup keeps its own. ui.prefs takes perspective_fov and refuses values
outside the range; ui.camera reports the angle the window draws with, and checks a replayed
camera against it, so its reply still replays. Field of view is in en, ar, de, he, ja, ko, vi and zh;
the ui.prefs settings list in docs/control-protocol.md and the guide's tour describe it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8865
* parameters.add: a parameter with no unit takes the design's units (#8865)
A new parameter given no unit took "mm" for any length or bare number, so
in an inch design `parameters.add {name: v, expression: "40/2"}` made a
20 mm parameter where the Parameters dialog makes 20 in. The unit a new
parameter infers is now a length in the design's units (mm designs are
unchanged); parameters.change on a new name and parameters.import share
the same inference. Angles and unit-less values keep their units.
A definition typed into a value of no fixed kind (a coupling's pitch,
a joint's value) still reads its bare number as millimetres, as that
field does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8912
Co-authored-by: Cursor <cursoragent@cursor.com>
* View cube: rapid clicks add full turns from the in-flight target.
Match arrow-key retargeting so a second cube click turns from the glide destination instead of the mid-animation camera (#8912).
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Problem: a design saved before body names were pinned (#6403) is pinned by its first command
that changes it, as part of that command. Undoing that command went back to the unpinned design,
whose fingerprints no evaluated result matched any more, so the first undo after opening
evaluated the whole timeline again: 63-72 s in the SELENE rover (5,484 features) when opened
from the command line or headless (`Session::opened_at`), 0.08 s with this change. `doc.open`
pinned at the end of the command instead, which kept undo fast but left the design with unsaved
changes on opening.
Solution: `Session::opened_at` pins the names as it opens the design, with the names the file's
bodies have (no result changes, so nothing is evaluated), and takes the pinned design as the
saved one: opening is no change.
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Favorites, User and Model sections stay lined up when only some lists hold a long name (follow-up to #8551).
Co-authored-by: Cursor <cursoragent@cursor.com>
home.settings and ai.connected_toast follow the English change from Settings to Preferences (التفضيلات, as ui.preferences). Hover is no longer rendered as scrolling in the browser and navigation bar options, the Project options dialog label is fully in Arabic, and the trackpad zoom key help says to hold the key.
* claim: #8875
* Text fields: a right-click menu with Cut, Copy, Paste and Select All (#8875)
Every kit text field (dialog and sketch value fields, the sketch dimension
box, canvas value boxes, names, text areas, passwords, read-only text) now
calls one shared ui_kit::text_menu::menu after drawing its editor. Rows are
disabled when nothing is selected, the text is read-only or a password, or
the clipboard holds no text. The edit marks the response changed and gives
the focus back, so owners that commit on lost focus keep the field; a right
press inside the selection keeps it; Esc closes only the menu; expression
suggestions wait while it is open. New message ui.select_all in a pending
locale file; Cut, Copy and Paste reuse ui.cut, ui.copy and ui.paste.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8860
* Timeline: delete after the marker counts and deletes the shown features (#8860)
With the bottom timeline filtered to one component, "Delete N Features After
History Marker" took the marker as a position among the shown features but
sliced the design's feature list with it. N counted features of other
components, and confirming deleted them too, including features before the
marker.
The entry now gets the feature's design position, the design's marker and
the shown positions, and deletes the shown features after the marker; the
label counts the same set. The history beside the browser shows every
feature and passes no filter, so it behaves as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Timeline: look up shown positions by binary search, test the entry before the marker (#8860)
The shown positions are ascending, so a binary search finds each one without
walking the list for every feature after the marker. The test now also checks
that a shown feature before the marker does not offer the entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A segmented control measured its options translated but painted them as
the caller passed them, so the many callers that pass English labels
(the Coil's Circular | Square and Inside | Center | Outside, Revolve's
One Side | Two Sides | Symmetric, Shell's direction, ...) showed English
in every language. Only where the row was too narrow and the control
fell back to its dropdown, which translates, did they read right.
Segments now paint, size, describe and tip their options translated;
the handles keep the option as passed.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7435
* Viewport: the 3D mouse, the bridge and drag-zoom stop at the model, like the wheel (#7435)
The wheel and pinch hold the model point under the cursor, so the view
comes up to the surface and stops there. Every other zoom path passed no
anchor, so the 3D mouse cap, the navigation bridge and drag-zoom zoomed
straight through the surface into the body.
A device has no pointer, so the cap and the bridge now hold the model
point in the middle of the view; drag-zoom holds the point under the
pointer, like the wheel. With "Zoom to the cursor" off the old
zoom-through-the-model behaviour stays, as it does for the wheel.
The orbit half of the issue is a design decision and is untouched.
* Viewport: drag-zoom holds the point where the drag started (#7435)
The zoom anchor followed the moving pointer, so the zoom slid away from
what was pressed on as the drag went on. It now holds the press point,
the way the wheel holds the point under the cursor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: turn around the model in the middle of the view (#7435)
The cap and the navigation bridge turned the view around the view's
centre, which after a pan or from far away sits behind the face, so the
part swung away while it turned. They now turn around the model point in
the middle of the view (the middle of the bodies in view over empty
space), and keep it still on screen. Preferences > Navigation > "Turn
around the model in the middle of the view" switches back to the old
behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: keep the turning point until the cap is back at rest (#7435)
The point the cap turns around was picked again every frame, so it slid
to whatever came into the middle as the view moved. It's now chosen when
the cap leaves rest and kept until the cap comes back, the way a mouse
orbit keeps the point it started on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: show the point the view turns around (#7435)
While the cap turns the view, a faint ball in the accent colour marks the
model point it turns around, so it's clear what the turn holds still. The
point is now picked when the cap starts turning, not when it only pans or
zooms, so a pan shows no ball.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3D mouse: orbit is a choice of Traced or Classic (#7435)
The checkbox becomes a two-way choice on the 3D mouse section's form:
Traced turns around the model in the middle of the view when the turn
begins and marks it with a faint ball; Classic turns around the view's
centre as before. Traced stays the default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the 3D mouse's Traced and Classic orbit (#7435)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Make model zoom and traced orbit opt-in (#7435)
---------
Co-authored-by: nomadsgalaxy <16734355+nomadsgalaxy@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8899
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* Sketch: keep Diameter box when placing a second concentric circle (#8899)
A centre-point circle's press starts drag-to-draw; releasing on the same
centre (or close to the press) must keep the stage-1 Diameter field instead
of resetting it and risking a second on-click that finishes the shape.
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
---------
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
* claim: #8352
* Sketch: equation-driven curve, a fit point spline from x(t) and y(t) formulas (#8352)
sketch.equation_curve draws a curve from formulas in the expression
language and the design's parameters: x(t) and y(t) over a range of t, or
y = f(x) over a range of x. The curve is a cubic fit spline through fixed
points sampled from the formulas, as many as keep it within a tolerance
(0.01 mm by default, at most 500 points); a curve that ends where it starts
closes smoothly. The sketch keeps the formulas (one new design-format
file), places the points again before every solve so they follow the
parameters, and sketch.equation_curve.edit changes them, keeping the joined
end points. Both commands have input and output schemas.
* Sketch: Equation Curve window, its Edit menu item, labels and guide (#8352)
The ribbon's Equation Curve opens a window for the form (parametric or
explicit), the formulas, the range and the tolerance; OK runs
sketch.equation_curve. Right-clicking an equation curve offers Edit
Equation Curve, which reopens the window on its formulas and runs
sketch.equation_curve.edit. New labels and help in a pending locale file
(with ar, de, he, ja, ko, vi and zh), the icon, the glossary term and the
sketching guide.
* Equation curve: one if for closing the sampled points (clippy collapsible_if)
A held solve applying a constraint, or the edit's own solve, could find a far
solution of the constraints and move points millions of millimetres while
the sketch said solved. Such a result now counts as a failed one: the next
held solve is tried, or the edit is refused.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7828
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: hold horizontal/vertical and line up with other points at once while drawing (#7828)
While drawing, the pointer lines up horizontally with the nearest sketch
point level with it and vertically with the nearest one plumb with it, at
the same time, as a dragged point already does; holding H/V with the
previous point still lines up across with another point. Dotted guides run
from the points lined up with (H, V or H+V), and the click adds a
Horizontal or Vertical constraint with each, in the shape's undo step,
unless the sketch already has it.
A click takes the tool out of the app while it runs, so refine_snap
treated every tool as the Line tool then: a rectangle's click could take a
line-extension inference its hover never showed. The tool's points and
kind are kept from the last hover, as the previous point was.
Preferences > Sketch > "Line up with other sketch points while drawing"
(sketch_align_points) turns it off for the old behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: lining up with other points is off unless turned on
Review on #8474: sketch_align_points defaults to off, so nothing changes for anyone who
doesn't turn it on. With it off, a click also treats the tool as before (the Line tool's
inferences), instead of keeping the tool's kind from the hover.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8570
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Design: pick one of the other open designs, or browse for a file (#8570)
With other designs open in tabs, Insert Design first lists them under the
button: one click inserts a saved one as a linked component; one with
unsaved changes inserts its saved file and the status line says so; one
never saved is greyed out, as there is no file to link. Browse... opens
the file picker, as the button did before, and it still goes straight
there with no other design open.
Preferences > Design > Linked designs > "Insert Design lists the designs
open in other tabs first" (insert_lists_open_designs) turns the list off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Design list: sit with the other menus' items, so run_item keeps its doc comment
Review on #8571: insert_design_items had landed between run_item and its comment. The
rebased menu-walk list keeps main's Target::HistoryControls beside Target::InsertDesign.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8100
* History: say why an edited feature behind the marker changes nothing (#8100)
Editing a feature that sits after the history marker (double-clicking its
greyed-out item) rolls back to it, previews the change, and on OK puts the
marker back where it was: the feature stays rolled back, so nothing in the
view changes and nothing says why. That is the silent "pattern of a cut
does nothing" in #8100 (the reporter's design has its pattern behind the
marker; on main the pattern itself builds fine once rolled forward).
- timeline.redefine replies `rolled_back` and, when true, a `note`; it also
carries the feature's `warning` (for a rolled-back feature, the one its
constructor met building it at its place).
- The window shows that note in the status line after such an edit.
- A rolled-back item's tooltip in both History layouts says it is after
the history marker and not built.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Arabic, Hebrew, Japanese, Vietnamese and Chinese for the rolled-back notes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #8639
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch profiles: close the joints near-coincident curves leave open (#8639)
Two free-form curves that lie on each other along a stretch (a DXF that
carries an outline twice, with the same straight sides and different
corners) are cut into sampled pieces whose ends the graph joins into one
node within 1e-4 mm, but the pieces keep their own ends, a few millionths
apart. Only analytic edges were closed at those joints, so the sliver
loops between the two curves stayed open by up to 1e-5 mm, more than the
1e-6 a solid needs. The region around them took those loops as holes:
extruding it failed with "profile loop is not closed" and it drew no
fill when picked, so it looked unselectable.
Close a line's joint in each finished loop: line to line at their middle,
a line onto any other segment's end. On the reporter's DXF the band
between the outer two rings now extrudes (110.5 mm2 by 2 mm = 220.9 mm3),
and the zero-area slivers no longer form profiles (221 -> 216).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8863
* Sketch: the status line after a dimension is in the interface language (#8863)
The Dimension tool built its "Dimension applied" status sentences (new
parameter, renamed parameter, plain value) and the driven-dimension note
with English format! strings, so they stayed English under a translated UI.
They now come from the catalog (one pending locale file: en, ar, de, he,
ja, ko, pl, vi, zh), with the typed parameter name passed in as is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8861
* History: Delete on a selected feature deletes the selection in both timelines (#8861)
With several features selected, Delete in a selected feature's menu deleted
the whole selection in the bottom timeline and only that feature in the
history beside the browser, which offered the selection as a separate
Delete Selected Features… entry.
Both menus now use one Delete entry: the selected features when the
right-clicked one is among them, labelled "Delete N Selected Features",
else that feature alone. The history beside the browser no longer adds its
own Delete Selected Features… to a selected feature's menu, since the entry
above covers it; folder menus keep it. The single-feature delete helper had
no callers left and is removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History: a feature's menu leaves out Delete Selected Features… by a flag (#8861)
A right-click on a feature outside the selection selects that feature
first, so in a feature's menu the clicked feature is always selected. A
flag that says the menu is a feature's says the same without the lookup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8006
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Parts library: button head cap screws, ISO 7380-1 (#8006)
Insert Part offered the socket head cap screw but no button head, so a
design using button heads had to stand in a cap screw and accept the
wrong head. A button_head_cap_screw family now sits beside it, taking
the same parameters from the ISO 7380-1 table over M3 to M16.
The head is a new Head::Dome: the shank and the head revolve as one
outline, with the rim at dk, a short cylindrical flank, the arc of the
crown, and a flat top around the socket, so the hex socket stays a plain
cut on a plane. The standard draws the flank and the flat but dimensions
neither; they are 0.15 k and 0.7 s, and the comment on those constants
records what that costs against the standard's crown radius r1 and why
neither other fractions nor r1 taken as given does better. dk, k, s and
t are exact, each checked against three reproductions of the table.
Insert Part, Change Part Size and the bill of materials need no change:
they read the families and their table rows from parts.library.
The wider fastener request is issue 7692; this is only the one family
from it, and leaves the rest of that list open.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Parts: format after the rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: the Button head cap screw family name
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Components: copy and paste bodies and components between designs and components (#3390)
Squashed for the rebase onto main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3511
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Paste New: copy from a design other than the one pasted into
`component_clone::paste` read the design it copies from through the session it pastes into.
`build` now takes the source (document, evaluated model, unapplied moves) apart from the
target session; Paste New within one design passes the session as both, as before. Names are
numbered against the target's names.
From another design (`Source::copied`, a `ForeignCopy` snapshot taken at copy time):
- names are kept where the target doesn't have them, else numbered;
- the user parameters the copy uses come along, `w_2` where the target has a `w`, with the
copied expressions following;
- a copy whose features use what isn't in it (bodies, sketches, faces, parameters outside it)
is refused with a list of what; `FeatureKind::input_bodies` lists the bodies a feature uses;
- configurations stay with their design, and the target's timeline marker must be at the end;
- a body moved in from outside comes as an imported base named `BodyImport1`.
Body transfers are pointed at the copy's components before they are added: `add_feature`
checks that the components they name exist, which another design's don't.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Engine: paste bodies and components copied in another design
`component.paste_from_design` pastes what `Session::foreign_copy` holds, at the same world
coordinates as in its design, into the active component or `component` (placed by
`component_path`; a component placed more than once gets it in every instance), as one step
to undo:
- bodies as imported bodies, without their history, in one Import feature (named as any
import is, "Import1"); a body seen in another placement ("Cube (B:2)") pastes as "Cube";
names the target has are numbered;
- components as independent copies (Paste New from the snapshot): with their history,
appearances, materials, joints and motion inside them; joints to the outside stay behind.
Tests: bodies (position, naming, target component, undo; a body of another placement) and
components (history, appearances, a part placed twice, editing independently, save and reopen,
undo; user parameters renamed; refused when using a body outside it; bodies moved in).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Clipboard: copy in one design, paste in another
Copying or cutting bodies or components also keeps a snapshot of them (`ForeignCopy`); another
tab pastes it with `component.paste_from_design`: bodies as imported bodies, components as
independent copies (Paste and Paste New alike), folded and selected. Cut pastes as a copy
there, the original staying; Esc on the cut leaves nothing to paste anywhere.
The last copy in any design is what pastes: each copy or cut is numbered, and a tab whose own
copy is older empties its clipboard when it is switched to (`drop_stale`). A failed copy
anywhere leaves nothing to paste in any tab.
Tests: bodies and components pasted in another tab, the last copy winning across tabs, cut
as a copy. `copied_bodies_stay_with_their_design` gave way to the cross-design test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Clipboard: what is selected wins over a design row picked earlier
Copy copied the whole design as a linked component whenever the design's
browser row was still picked, even after a component, body or feature had
been selected in the view or another tab, and failed in an unsaved design.
The design row now gives way to anything selected, and switching tabs
drops the picked components of the design left.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Put the Paste from Another Design label in the pending locale file
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: unground the placement before moving it (a design's first part is grounded)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop locale keys main already folded into en.json
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Paste from Another Design in the complete catalogs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #7409
* Keyboard Shortcuts: the read-only list says so and leads to the editable page (#7409)
Home › Keyboard shortcuts and Help › Keyboard Shortcuts open the
Shortcuts page read-only, in the Preferences window with its sidebar and
Cancel/Apply/OK, so it looked exactly like Settings › Shortcuts with
Import…, Reset All and recording missing. The read-only page now says
"Read-only list: shortcuts can't be changed here." and has an "Edit
shortcuts" button that turns the same page into the editable one.
Strings in assets/locales/pending/shortcuts-read-only-note.json (en, ja,
zh). Harness test opens it both ways, checks the note, clicks Edit
shortcuts, and finds Import…, Reset All and a recordable binding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Arabic, Hebrew and Vietnamese for the read-only shortcuts note
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #8864
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: with Orbit, Pan or Zoom lit, a press held still keeps the highlight under it (#8864)
A mode lit in the navigation bar, or a held Space, owns drags, not a still
press (#8438), but the hover pick counted any left press under such a mode
as navigation and dropped the highlight, so the line under a Select Other
hold went dark until the list opened. Only a preset's left-button binding
or Ctrl+left orbit navigates from the press on now; a lit mode's drag
still drops the highlight once it starts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Orbiting about the point under the cursor (or the origin) turned the camera
about its target and then panned to put the pivot back. The pan works at the
target's depth with the parallel-view scale, so in a perspective view the
pivot slid off its pixel and the model swung about the camera.
The camera now turns rigidly about the pivot: Camera::orbit_about keeps the
pivot's coordinates in the camera's frame and rebuilds the target from the
new orientation, so the pivot stays exactly on its pixel in both projections.
The Shift snap spring and view.navigate's pivot orbit use the same.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit e88779218)
#2142 made orbiting about the point under the cursor turn the camera in place instead of turning the part about that point. Restore the 0.15.0 behaviour.
This reverts commit cac4bccea8.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
npm puts a Unix shell script with the bare name (codex-acp,
claude-code-acp, gemini) beside the .cmd shim. The lookup tried the bare
name first, so every npm-installed agent failed with "not a valid Win32
application (os error 193)". Windows now only considers .exe/.cmd/.bat,
and a command saved with the bare path runs the shim beside it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 60ea8c69d2)
On 32-bit Windows SetWindowLongPtrW is SetWindowLongW, which takes and
returns i32, so the window-procedure hook didn't compile for i686.
The macOS app bundle now signs the bundled solidcraft-cli before the
bundle itself; codesign refuses a bundle with an unsigned helper.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 94e76cd97e)
* Windows: start Direct3D 12 first, and Vulkan only without a D3D12 GPU
wgpu started Vulkan, D3D12 and OpenGL together and preferred Vulkan, so
every Windows start loaded all installed Vulkan drivers. An old Intel
Vulkan driver (igvk64.dll) crashed 0.10.1 at startup inside the driver.
The app now probes D3D12, then Vulkan, then OpenGL, one backend at a
time, and starts only the first with a hardware adapter (WARP when none
has one). WGPU_BACKEND still wins; graphics.json's "backend" sets the
order by hand; the software renderer (safe mode, the retry) uses D3D12
alone. A new Windows CI job starts the real app under several settings.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: a test filter YAML parses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: the startup smoke test writes graphics.json where the app reads it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: run the WARP shader tests one at a time
WARP's shader JIT (d3d10warp.dll) crashed twice in 124 runs of the gpu
tests with four test threads, with a null read inside its own optimizer
while several devices compiled compute pipelines at once. Serial runs
did not crash.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 95ea05e7c8)
* GPU tessellation: a pipeline the device cannot build falls back to CPU meshing instead of crashing (#1098)
Build the tessellation compute pipeline inside error scopes; TessGpu::new returns an error,
and the viewport logs it and meshes bodies on the CPU. A Windows CI job builds the pipeline
with D3D12's FXC on the WARP adapter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tessellation shader: basis functions in one-dimensional local arrays, so D3D12's FXC compiles it (#1098)
FXC has to unroll loops that write an array inside a struct (Basis.n0/n1) or a 2-D array
(ndu) by a counter, and cannot with run-time trip counts (X3511). A2.2 basis functions in a
local 1-D array returned whole; derivatives from the degree p-1 functions; the pole step
offsets computed rather than indexed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Since the model's mesh went back to the reference mesher (#940), the GPU viewport drew
opaque bodies from their display plans while hover and selection lit faces with the
reference mesh's triangles. Two triangulations of the same face at equal depth fought, so
a hovered face shimmered in wedges instead of lighting whole.
Faces lit over a body drawn from its plan now use the plan's own triangles
(ModelBody::plan_mesh, evaluated once on the CPU), and the highlight pass gets a small
depth bias toward the eye so f32 rounding between the GPU and CPU evaluations of the same
triangles cannot speckle it either.
Test: every face of a box with a pocket and a round boss, hovered and rendered offscreen
through the viewport's real pipelines on the GPU path, lights the same pixels as on the
CPU path (skipped without a GPU adapter).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 12:56:47 +00:00
542 changed files with 206416 additions and 206137 deletions
@@ -84,6 +84,8 @@ Editable drawing code, native projects and shipped exports are collected under `
| docs/book/src/generated/tool-preview.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/tool-preview.json`; gitignored) | MIT OR Apache-2.0 |
| assets/fonts/liberation-sans/LiberationSans-Regular.ttf | Red Hat, Inc. (Liberation Fonts 2.x; digitized data Google) | https://github.com/liberationfonts (Debian fonts-liberation), unmodified; licence text in assets/fonts/liberation-sans/OFL.txt; used for sketch Text outlines | SIL OFL 1.1 |
| assets/fonts/biz-udp-gothic/BIZUDPGothic-Regular.ttf | The BIZ UDGothic Project Authors | https://github.com/googlefonts/morisawa-biz-ud-gothic (Google Fonts), unmodified; licence text in assets/fonts/biz-udp-gothic/OFL.txt; used for web UI Japanese font | SIL OFL 1.1 |
| assets/fonts/craft-ui-sc/CraftUI-SC.otf | Adobe / Google Inc. (Noto Sans SC); SolidCraft subset | https://github.com/notofonts/noto-cjk Sans/SubsetOTF/SC Regular, glyph-subset for assets/locales/zh.json and renamed Craft UI SC (OFL reserved-name); licence text in assets/fonts/craft-ui-sc/OFL.txt; web UI Simplified Chinese | SIL OFL 1.1 |
| assets/fonts/craft-ui-tc/CraftUI-TC.otf | Adobe / Google Inc. (Noto Sans TC); SolidCraft subset | https://github.com/notofonts/noto-cjk Sans/SubsetOTF/TC Regular, glyph-subset for assets/locales/zh-TW.json and renamed Craft UI TC (OFL reserved-name); licence text in assets/fonts/craft-ui-tc/OFL.txt; web UI Traditional Chinese | SIL OFL 1.1 |
| tests/step-conformance/cone_point.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/step-conformance/cone_point_vertex.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
| tests/step-conformance/cylinder.step | step-conformance contributors | generated from formulas by https://github.com/dan335/step-conformance (corpus/generated, 96f30bb); import regression fixture | CC0-1.0 |
@@ -125,6 +127,8 @@ Editable drawing code, native projects and shipped exports are collected under `
| assets/appearances/library.rs | SolidCraft contributors | Original SolidCraft resource data or drawing code, collected without redesign | MIT OR Apache-2.0 |
| assets/appearances/opaque_finishes.rs | SolidCraft contributors | original illustrative opaque finish values; no external dataset, textures or measured engineering data | MIT OR Apache-2.0 |
| assets/fonts/biz-udp-gothic/OFL.txt | The BIZ UDGothic Project Authors | Unmodified accompanying font licence | SIL OFL 1.1 |
| assets/fonts/craft-ui-sc/OFL.txt | Adobe / Google Inc. (Noto CJK); SolidCraft header | Accompanying OFL for CraftUI-SC.otf | SIL OFL 1.1 |
| assets/fonts/craft-ui-tc/OFL.txt | Adobe / Google Inc. (Noto CJK); SolidCraft header | Accompanying OFL for CraftUI-TC.otf | SIL OFL 1.1 |
| assets/fonts/ibm-plex-mono/OFL.txt | IBM Corp. | Unmodified accompanying font licence | SIL OFL 1.1 |
| assets/fonts/ibm-plex-sans/OFL.txt | IBM Corp. | Unmodified accompanying font licence | SIL OFL 1.1 |
| assets/fonts/liberation-sans/OFL.txt | Red Hat, Inc.; Liberation Fonts contributors | Unmodified accompanying font licence | SIL OFL 1.1 |
@@ -609,6 +613,27 @@ Original SolidCraft drawings, Open for owner review; no runtime assignments.
| assets/icons/ui/design/svg/model/timeline_stop.svg | SolidCraft contributors | Original history playback icon; canonical grey_cube base and original action cue | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/flat/status_pin.svg | SolidCraft contributors | Original analytic pin icon for persistent viewport results | MIT OR Apache-2.0 |
| assets/locales/pending/render-wear.json | SolidCraft contributors | Original UI labels and translations | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/equation_curve.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/locales/pending/sketch-recent-snap.json | SolidCraft contributors | Original preference messages for the recent centre and midpoint snap | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_horizontal.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_vertical.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_angle.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_parallel.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_perpendicular.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_tangent_external.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_tangent_at.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_tangent_two.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/construction_line_bisector.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-circle.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-circle.json`; gitignored) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-flower.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-flower.json`; gitignored) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-involute.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-involute.json`; gitignored) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-line.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-line.json`; gitignored) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-parabola.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-parabola.json`; gitignored) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-spiral.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-spiral.json`; gitignored) | MIT OR Apache-2.0 |
| docs/book/src/generated/equation-wave.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-wave.json`; gitignored) | MIT OR Apache-2.0 |
| assets/icons/ui/design/svg/model/print_face.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 |
| assets/locales/fi.json | SolidCraft contributors | Original Finnish translation of SolidCraft's English catalog, AI-assisted (Claude Code) clean-room from the English and not yet reviewed line by line by a native speaker; no commercial CAD text used | MIT OR Apache-2.0 |
## Code adapted from sibling projects
@@ -668,6 +693,7 @@ copied into SolidCraft.
| Directory | Source | Licence | Changes |
|---|---|---|---|
| vendor/accesskit_macos | accesskit_macos 0.26.3, https://github.com/AccessKit/accesskit (The AccessKit contributors) | MIT OR Apache-2.0 | the subclassing adapter and its tests from 0.27.2: dropping the adapter keeps AppKit's key-value observers (vendor/README.md) |
| vendor/truck-shapeops | truck-shapeops 0.4.0, https://github.com/ricosjp/truck (RICOS Co. Ltd.) | Apache-2.0 | robust meshing and nearest-parameter fallback in booleans; degenerate intersection-curve rejection; face and edge history of booleans; trace macro; corner choice at vertices several intersection curves end on; reuse of an operand's meshes (vendor/README.md) |

@@ -98,7 +98,7 @@ More commands, the Windows cross-build and the browser build are in [docs/buildi
runs its own design session, or with `--connect` it drives the running app so you can watch.
Claude Code: `claude mcp add solidcraft -- solidcraft-cli mcp`. If a terminal doesn't find
`solidcraft-cli` (older Windows installers don't put it on `PATH`), give its full path (by default
`"C:\Program Files\SolidCraft\solidcraft-cli.exe"`). Tools, access rules and an example session:
`"C:\\Program Files\\SolidCraft\\solidcraft-cli.exe"`). Tools, access rules and an example session:
[docs/mcp.md](docs/mcp.md).
## Scripts
@@ -150,3 +150,4 @@ Tinkercad are trademarks of their respective owners, named only to describe comp
constUSAGE_RUN: &str=" solidcraft-cli run <script.json|design.sc|part.step> [--in design.sc|part.step] [--out FILE]... [--save FILE] [--quiet] [--results] [--timings] [--profile] [--json-out FILE] [--allow-errors]\n solidcraft-cli run --in <design.sc|part.step> [--out FILE]...\n (a timeline feature that fails fails the run and nothing is written; --allow-errors writes anyway)\n (--timings prints {timings: [{index, command, ms}], total_ms} for a script, with --results its results too;\n --profile adds each command's profile: {boolean_ms, tessellate_ms, other_ms}, the kernel's share)\n";
constUSAGE_RUN: &str=" solidcraft-cli run <script.json|design.sc|part.step> [--in design.sc|part.step] [--out FILE]... [--save FILE] [--quiet] [--results] [--timings] [--profile] [--json-out FILE] [--allow-errors]\n [--param-check off|warn|strict]\n solidcraft-cli run --in <design.sc|part.step> [--out FILE]...\n (a timeline feature that fails fails the run and nothing is written; --allow-errors writes anyway)\n (--param-check checks each step against its command's contract: warn reports on stderr, strict stops the run)\n (--timings prints {timings: [{index, command, ms}], total_ms} for a script, with --results its results too;\n --profile adds each command's profile: {boolean_ms, tessellate_ms, other_ms}, the kernel's share)\n";
/// `eval`'s lines in the usage.
constUSAGE_EVAL: &str=" solidcraft-cli eval <script.json|design.sc|part.step> [--in design.sc|part.step] [--json-out FILE] (alias: inspect)\n solidcraft-cli eval --in <script.json|design.sc|part.step> [--json-out FILE]\n (with both inputs, runs the positional script on --in before measuring; does not automatically save the modified design)\n (--json-out FILE writes the JSON that run (with --results, else the measurement) and eval print to FILE instead of stdout,\n as plain UTF-8: a shell's > can re-encode it, e.g. Windows PowerShell adds a byte-order mark)\n";
"The graphics device was reset (the graphics driver stopped responding), so SolidCraft closed and started again. Unsaved changes were kept for recovery.",
);
ifsoftware{
note.push_str(" This start uses software rendering, which doesn't depend on the graphics driver.");
}
ifletSome(reason)=self::reason(reason){
note.push_str(&format!(" The graphics driver reported: {reason}"));
}
note
}
/// Start SolidCraft again with the same arguments, the loss stamped at `lost_at`, on the software
/// renderer when `software`.
pubfnrestart(software: bool,lost_at: u64){
letOk(exe)=std::env::current_exe()else{return};
/// The command that starts `exe` again with `args`, the loss stamped at `lost_at` and its
/// `reason`, on the software renderer when `software`.
"A Single hole snaps to the middle of its face and to the centres of its round edges":"A Single hole snaps to the middle of its face and to the centres of its round edges",
"Base Center":"Base Centre",
"Center X":"Centre X",
"Center Y":"Centre Y",
"Center of mass":"Centre of mass",
"Centre to centre":"Centre to centre",
"Circle center":"Circle centre",
"Colour":"Colour",
"Copy all licences":"Copy all licences",
"Customize Toolbar":"Customise Toolbar",
"Customize…":"Customise…",
"Face center":"Face centre",
"Favorites":"Favourites",
"Favourite":"Favourite",
"Mass Center":"Mass Centre",
"Modeled":"Modelled",
"Select the centre the pattern turns around first":"Select the centre the pattern turns around first",
"Snap to face and edge centres":"Snap to face and edge centres",
"color.gamma":"Showing colour values in 0-255 gamma space",
"color.linear":"Showing colour values in 0-1 linear space",
"color.selected":"Selected colour",
"dxf.cancelled":"DXF export cancelled",
"dxf.cancelling":"Cancelling DXF export",
"help.apache":"Apache licence 2.0",
"help.appearance.assign":"Gives the selected bodies, faces or components a colour or a material look, without changing their weight. Use it to tell parts apart or to preview a finish.",
"help.face.delete":"Removes the selected faces and lets the neighbouring faces close the gap, or leaves the gap open as a surface. Use it to take off a rounded edge, a hole or a boss that is in the way.",
"help.font_details":"The interface uses egui's built-in fonts (Ubuntu Light and Hack, under the Ubuntu Font Licence and the MIT/Bitstream Vera licence; Noto Emoji and the emoji icon font, under the OFL and MIT). Sketch text uses Liberation Sans (SIL OFL 1.1). The Crafting Apps' optional font pack, craft-fonts (BIZ UDPGothic, Shippori Mincho, BIZ UDMincho, Noto Sans CJK SC, Noto Sans Arabic; SIL OFL 1.1), is not bundled in SolidCraft builds.",
"help.licences":"Licences",
"help.material.assign":"Sets what the selected bodies are made of, such as steel, aluminium or ABS. Use it so that the mass and weight match the real part.",
"help.mit":"MIT licence",
"help.solid.draft":"Tilts the selected faces by the angle you set, measured from a neutral plane. Use it on moulded or cast parts so that they slide out of the mould.",
"help.solid.revolve":"Spins a sketch profile around an axis to make a round solid. Use it for shafts, knobs, bowls and any part that is round about a centre line.",
"help.solid.split_body":"Cuts a body into separate bodies with a plane, the face of another body or a sketch line. Use it to make parts that are printed, machined or coloured on their own.",
"help.solid.split_face":"Divides the selected faces along a plane, the face of another body or sketch curves, without cutting the body. Use it to give part of a face its own draft, colour or offset.",
"help.third_party":"Third-party licences",
"home.new_mm_hint":"Millimetres · opens in Design",
"navbar.description.separator":"A thin line that groups neighbouring slots.",
"pattern.alignment_hint":"Counts include the original. Centre balances copies; Flip chooses the extra side for even totals.",
"prefs.bottom_centre":"Bottom centre",
"prefs.logo_theme":"Theme's colours",
"prefs.max_file_size":"Largest file to open",
"prefs.max_file_size_design":"Design files",
@@ -39,6 +78,9 @@
"prefs.megabytes":"MB",
"prefs.sketch_conflict_colour":"Conflicting geometry in the conflict colour",
"prefs.sketch_conflict_colour_note":"While a sketch's constraints conflict, the curves and points a failing constraint holds are drawn in the conflict colour too, not only its glyph or dimension. Off: they keep their usual colours.",
"prefs.sketch_construction_lines":"Extended construction line tools",
"prefs.sketch_recent_snap":"Auto snap to recent centres and midpoints",
"prefs.sketch_recent_snap_note":"While drawing, snap the cursor where the guides of the two most recent circle centres or straight-edge midpoints cross. Off: those guides stay visual and the cursor does not move.",
"prefs.sketch_state_icons":"Sketch icons in the colour of their state",
"prefs.sketch_state_icons_note":"In History and the browser, a sketch's icon takes the colour of its state (under constrained, fully constrained or conflicting) and its tooltip names the state. Off: every sketch has the same icon.",
"prefs.sketch_tracking_guides":"Centre and midpoint alignment guides",
@@ -50,6 +92,7 @@
"prefs.theme_follow_note":"Reloaded whenever another tool rewrites it. Choosing a theme stops following it.",
"prefs.theme_follow_off":"Off",
"prefs.theme_follow_stop":"Stop following",
"prefs.trackpad_zoom_modifier.help":"Hold only this key to zoom at the pointer with vertical scroll. Off keeps the existing scroll behaviour.",
"prefs.view":"View behaviour",
"prefs.viewport_background_colour":"Colour",
"render.aging_add":"Add aging layer",
@@ -79,6 +122,7 @@
"render.aging_target_help":"A named target must still match its captured index and name. Global masks are world-anchored; they do not follow moving parts. This is neither cavity detection nor true edge wear. Filter the list to reach additional bodies.",
"render.bloom_help":"Creative output-only glow from positive linear highlights, spread with three normalised box passes. Radius is in output pixels. Added in linear display light before sRGB; not a lens, volumetric effect or convergence improvement. The raw EXR is unchanged.",
"render.cpu_area_editor_help":"Full side vectors in millimeters; U cross V points towards the emitting side. This differs from GPU half-edge vectors.",
"render.cpu_light_help":"Up to eight directional lights. An empty custom list turns them off; selecting a preset restores its lights. Colours are linear RGB and intensity is relative, not watts.",
"render.effects_gpu_only":"These effects require GPU path tracing. Changing the page never switches the renderer automatically.",
"render.effects_help":"Combine ordered colour looks and image-space lens effects. Rendering and raw-master regrading use the same saved settings. Raw EXR stays unchanged. These are original artistic controls, not calibrated lens or branded-film emulations.",
"render.effects_reset_lens":"Reset lens effects",
"render.effects_seed":"Pattern seed",
"render.env_colour":"Colour",
"render.environment.radial_only":"Centre and radius apply to Radial mode.",
"render.error_finish_gesture":"finish the modelling gesture before previewing",
"render.error_finish_operation":"finish the current modelling operation before entering Render",
"render.hdr_primaries_undeclared":"The source does not declare primaries; review the renderer colour requirements.",
"render.image_cancelled":"Render cancelled",
"render.image_cancelling":"Cancelling",
"render.image_scene_stale":"Finish the modelling gesture or refresh the scene before checking or starting an image.",
"render.inspector_colour":"Colour",
"render.layer_down":"Move down",
"render.layer_enabled":"Layer enabled",
"render.layer_remove":"Remove layer",
@@ -124,6 +178,11 @@
"render.library_rig_help":"Fit once at an explicit centre and physical extent. Complete rigs include passive cards; calibration blockers still refuse. Conservative emitter/card clearance is checked before saving.",
"render.library_source_preview_help":"Authored base-colour source map. This is not a rendered or measured material preview.",
"render.library_unfavorite":"Remove favourite",
"render.light_behaviour":"BEHAVIOUR",
"render.light_preview_help":"Live view is unshadowed; Area lights use a centre-sample approximation. Render uses the complete light model.",
"render.light_product_centre":"Product centre",
"render.light_temperature":"Colour temperature",
"render.lighting_colour":"Colour",
"render.look_add":"Add colour look",
"render.look_bleach":"Bleach-bypass-inspired",
"render.look_cool":"Cool",
@@ -147,30 +206,45 @@
"render.radial_distortion":"Radial distortion",
"render.ribbon_aging":"Aging",
"render.ribbon_effects":"Effects",
"render.ribbon_studios_help":"Browse implemented studio compositions and review their replacements before applying. Concept-only scenes remain labelled.",
"render.sharpening":"Detail sharpening",
"render.soft_focus":"Soft focus",
"render.stage_panels.centre":"Centre",
"render.stage_panels.source_note":"Authored base-colour source map. Not a measured material.",
"render.studio_area_help":"Up to four one-sided rectangles. Orthogonal half-edges U and V define size; U × V faces the lit side. Coordinates are world-space millimetres.",
"render.studio_center":"Centre X, Y, Z (mm)",
"render.studio_hdr_help":"Radiance .hdr, 2:1 panorama, up to 2048 × 1024. EXR is unavailable. The colour assumption applies only when primaries are unspecified.",
"sketch_text.align_center":"Centre",
"ui.3d_mouse_kind_cap":"Return to Centre",
"ui.3d_mouse_looks_like_cap":"The reading stays put while you hold it, the way a Return to Centre device does.",
"ui.3d_mouse_orbit_tip":"Traced: the 3D mouse turns the view around the part of the model in the middle of the view when the turn begins, marked by a faint ball. Classic: around the view's centre",
"ui.3d_mouse_step_pull":"Pull the cap towards you, hold it, then let go.",
"ui.3d_mouse_switch_cap":"Calibrate as Return to Centre",
"ui.agent_chat_minimize":"Minimise to a strip",
"ui.ai_mode_edits_note":"Modelling commands run without asking; saving, opening, exporting and other file or destructive actions still ask.",
"ui.center":"Centre",
"ui.center_arc_follows_cursor":"Centre point arc follows the cursor's direction",
"ui.center_arc_follows_cursor_tip":"A centre point arc runs clockwise or counter-clockwise the way the cursor goes round its centre. Off: always counter-clockwise from the start.",
"ui.centerline":"Centreline",
"ui.colour_vision":"Colour vision",
"ui.colour_vision_note":"Changes the colours that carry a meaning: sketch states, axes, bends, analyses and icons. If you use Windows colour filters, keep this Off.",
"ui.colour_vision_off_tip":"The theme's own colours",
"render.cpu_glass_help":"Standard uses bounded paths and may darken reflective glass. Continue reflections stops with an error if a supported optical limit is reached. Selected opaque reflections and unsupported glass shapes remain unavailable.",
"render.cpu_glass_label":"Glass rendering",
"render.cpu_glass_standard":"Standard"
},
"ar":{
"render.cpu_glass_continue":"متابعة الانعكاسات",
"render.cpu_glass_help":"يستخدم الوضع القياسي مسارات ضوء محدودة، وقد يجعل الزجاج العاكس أغمق. يوقف خيار «متابعة الانعكاسات» التصيير مع ظهور خطأ عند بلوغ أحد الحدود البصرية المدعومة. تظل الانعكاسات المحددة على الأجسام المعتمة وأشكال الزجاج غير المدعومة غير متاحة.",
"render.cpu_glass_help":"Standard begrenzt die Lichtwege und kann reflektierendes Glas abdunkeln. Reflexionen fortsetzen stoppt das Rendering mit einem Fehler, wenn eine unterstützte optische Grenze erreicht wird. Ausgewählte opake Reflexionen und nicht unterstützte Glasformen bleiben nicht verfügbar.",
"render.cpu_glass_label":"Glasdarstellung",
"render.cpu_glass_standard":"Standard"
},
"es":{
"render.cpu_glass_continue":"Continuar reflejos",
"render.cpu_glass_help":"Estándar limita los recorridos y puede oscurecer el vidrio reflectante. Continuar reflejos detiene el render con un error si alcanza un límite óptico admitido. Los reflejos opacos seleccionados y las formas de vidrio no compatibles siguen sin estar disponibles.",
"render.cpu_glass_label":"Render de vidrio",
"render.cpu_glass_standard":"Estándar"
},
"he":{
"render.cpu_glass_continue":"המשך השתקפויות",
"render.cpu_glass_help":"המצב הרגיל מגביל את מסלולי האור ועלול להכהות זכוכית מחזירת אור. האפשרות «המשך השתקפויות» עוצרת את הרינדור עם שגיאה כאשר מגיעים לאחת המגבלות האופטיות הנתמכות. השתקפויות נבחרות על גופים אטומים וצורות זכוכית שאינן נתמכות נשארות לא זמינות.",
"render.cpu_glass_help":"표준은 광선 경로를 제한하므로 반사 유리가 어둡게 보일 수 있습니다. 반사 계속은 지원되는 광학 한계에 도달하면 오류와 함께 렌더링을 중지합니다. 선택한 불투명 표면 반사와 지원되지 않는 유리 형상은 계속 사용할 수 없습니다.",
"render.cpu_glass_label":"유리 렌더링",
"render.cpu_glass_standard":"표준"
},
"vi":{
"render.cpu_glass_continue":"Tiếp tục phản xạ",
"render.cpu_glass_help":"Chế độ tiêu chuẩn giới hạn đường truyền ánh sáng và có thể làm kính phản xạ trông tối hơn. Tùy chọn Tiếp tục phản xạ dừng kết xuất kèm lỗi khi đạt một giới hạn quang học được hỗ trợ. Các phản xạ đã chọn trên vật thể đục và các hình dạng kính không được hỗ trợ vẫn không khả dụng.",
"render.cpu_directional_shadow_help":"CPU optics are temporary and require certified sheets or axis-aligned boxes with opaque body and face appearances. Directional transmitted shadows require global shadows on and all active assignments to agree. Mixed choices, nesting, environment lighting and local lights are unsupported in that mode. This is straight RGB visibility, not refracted shadows or caustics. Subsurface, coats and maps remain unsupported; fixed and progressive sampling retain finite-depth limits.",
"render.cpu_shadow_conflict":"The global directional transmission option conflicts with an optical assignment whose transmitted shadows are off. No authored option was changed.",
"render.cpu_shadow_mixed":"CPU uses one transmitted-shadow switch for all active optical assignments. Mixed on/off choices cannot be represented and have been preserved."
},
"es":{
"render.cpu_directional_shadow_help":"La óptica CPU es temporal y requiere láminas o cajas alineadas con los ejes certificadas, con aspectos opacos de cuerpo y caras. Las sombras transmitidas direccionales requieren sombras globales activadas y que todas las asignaciones activas coincidan. Ese modo no admite mezclas, nesting, iluminación de entorno ni luces locales. Es visibilidad RGB recta, sin sombras refractadas ni cáusticas. La dispersión subsuperficial, las capas y los mapas siguen sin admitirse; el muestreo fijo y progresivo conserva los límites de profundidad.",
"render.cpu_shadow_conflict":"La opción global de transmisión direccional contradice una asignación óptica con sombras transmitidas desactivadas. No se ha cambiado ninguna opción definida.",
"render.cpu_shadow_mixed":"CPU usa un único control de sombras transmitidas para todas las asignaciones ópticas activas. No puede representar opciones activadas y desactivadas mezcladas; se han conservado."
},
"de":{
"render.cpu_directional_shadow_help":"CPU-Optik ist temporär und erfordert zertifizierte Scheiben oder achsenparallele Quader mit opaken Körper- und Flächenerscheinungen. Gerichtete durchgelassene Schatten erfordern globale Schatten und übereinstimmende aktive Zuweisungen. Gemischte Optionen, Verschachtelung, Umgebungslicht und lokale Lichter sind in diesem Modus nicht unterstützt. Dies ist geradlinige RGB-Sichtbarkeit, keine gebrochenen Schatten oder Kaustiken. Subsurface-Streuung, Beschichtungen und Maps bleiben nicht unterstützt; feste und progressive Abtastung behalten die endliche Tiefengrenze.",
"render.cpu_shadow_conflict":"Die globale gerichtete Transmission widerspricht einer optischen Zuweisung mit ausgeschalteten durchgelassenen Schatten. Keine festgelegte Option wurde geändert.",
"render.cpu_shadow_mixed":"CPU verwendet einen Schalter für durchgelassene Schatten aller aktiven optischen Zuweisungen. Gemischte Ein-/Aus-Werte sind nicht darstellbar und wurden beibehalten."
},
"ko":{
"render.cpu_directional_shadow_help":"CPU 광학은 임시 설정이며 불투명한 바디와 면 외관을 가진 인증된 판 또는 축 정렬 상자가 필요합니다. 방향성 투과 그림자는 전역 그림자가 켜져 있고 모든 활성 할당의 설정이 같아야 합니다. 이 모드는 혼합 설정, 중첩, 환경 조명 및 로컬 광원을 지원하지 않습니다. 이는 직선 RGB 가시성이며 굴절 그림자나 코스틱이 아닙니다. 표면하 산란, 코팅 및 맵은 계속 지원하지 않으며 고정 및 점진적 샘플링은 유한 깊이 제한을 유지합니다.",
"render.cpu_shadow_conflict":"전역 방향성 투과 옵션이 투과 그림자가 꺼진 광학 할당과 충돌합니다. 작성된 옵션은 변경되지 않았습니다.",
"render.cpu_shadow_mixed":"CPU는 모든 활성 광학 할당에 하나의 투과 그림자 스위치를 사용합니다. 켜짐과 꺼짐이 섞인 설정은 표현할 수 없으며 그대로 보존되었습니다."
},
"ar":{
"render.cpu_directional_shadow_help":"بصريات CPU مؤقتة وتتطلب صفائح أو صناديق محاذية للمحاور اجتازت التحقق، بمظاهر معتمة للجسم والأوجه. تتطلب الظلال النافذة الاتجاهية تفعيل الظلال العامة وتطابق كل التعيينات النشطة. لا يدعم هذا الوضع الخيارات المختلطة أو التداخل أو إضاءة البيئة أو الأضواء المحلية. هذه رؤية RGB مستقيمة وليست ظلالًا منكسرة أو كاوستيك. يبقى التشتت تحت السطحي والطلاءات والخرائط غير مدعوم، وتبقى حدود العمق المحدودة لأخذ العينات الثابت والتدريجي.",
"render.cpu_shadow_conflict":"يتعارض خيار النفاذ الاتجاهي العام مع تعيين بصري تكون ظلاله النافذة معطلة. لم يتغير أي خيار محدد.",
"render.cpu_shadow_mixed":"يستخدم CPU مفتاح ظلال نافذة واحدًا لجميع التعيينات البصرية النشطة. لا يمكن تمثيل خليط من التفعيل والتعطيل، وقد تم الاحتفاظ بالخيارات."
},
"he":{
"render.cpu_directional_shadow_help":"אופטיקת CPU היא זמנית ודורשת יריעות או תיבות מיושרות לצירים שעברו אימות, עם מראה אטום של הגוף והפאות. צללים מועברים כיווניים דורשים צללים כלליים פעילים ואחידות בכל ההקצאות הפעילות. מצב זה אינו תומך בערכים מעורבים, קינון, תאורת סביבה או אורות מקומיים. זו נראות RGB בקו ישר, ללא צללים נשברים או קאוסטיקה. פיזור תת-משטחי, ציפויים ומפות עדיין אינם נתמכים; דגימה קבועה והדרגתית שומרות על מגבלות העומק הסופי.",
"render.cpu_shadow_conflict":"אפשרות ההעברה הכיוונית הכללית סותרת הקצאה אופטית שהצללים המועברים שלה כבויים. שום אפשרות שנקבעה לא שונתה.",
"render.cpu_shadow_mixed":"CPU משתמש במתג צללים מועברים אחד לכל ההקצאות האופטיות הפעילות. לא ניתן לייצג ערכים מעורבים של פעיל וכבוי, והם נשמרו."
"render.cpu_directional_shadow_help":"Quang học CPU là tạm thời và cần tấm hoặc hộp song song các trục đã được kiểm chứng, với diện mạo thân và mặt đục. Bóng truyền qua từ đèn định hướng cần bật bóng toàn cục và mọi phép gán đang bật phải cùng lựa chọn. Chế độ này không hỗ trợ lựa chọn lẫn bật/tắt, lồng nhau, ánh sáng môi trường hoặc đèn cục bộ. Đây là độ nhìn thấy RGB theo đường thẳng, không phải bóng khúc xạ hay caustic. Tán xạ dưới bề mặt, lớp phủ và bản đồ vẫn không được hỗ trợ; lấy mẫu cố định và lũy tiến vẫn có giới hạn độ sâu hữu hạn.",
"render.cpu_shadow_conflict":"Tùy chọn truyền sáng định hướng toàn cục xung đột với phép gán quang học có bóng truyền qua đang tắt. Không thay đổi tùy chọn đã soạn nào.",
"render.cpu_shadow_mixed":"CPU dùng một công tắc bóng truyền qua cho tất cả phép gán quang học đang bật. Không thể biểu diễn lựa chọn lẫn bật và tắt; các lựa chọn đã được giữ nguyên."
"render.cpu_optics_certification":"CPU Check and Start validate captured identity, opaque body and face appearances, and the requested sheet or axis-aligned box certificate. Choosing a boundary does not certify geometry. Start rechecks the capture; passing Check does not guarantee later admission."
},
"es":{
"render.cpu_optics_certification":"Comprobar e Iniciar en CPU validan la identidad capturada, los aspectos opacos del cuerpo y sus caras, y el certificado de lámina o caja alineada con los ejes solicitado. Elegir una frontera no certifica la geometría. Iniciar comprueba de nuevo la captura; superar Comprobar no garantiza una admisión posterior."
},
"de":{
"render.cpu_optics_certification":"Prüfen und Starten auf der CPU validieren die erfasste Identität, opake Körper- und Flächenerscheinungen sowie das angeforderte Zertifikat für Scheiben oder achsenparallele Quader. Die Wahl einer Grenze zertifiziert keine Geometrie. Starten prüft die Erfassung erneut; erfolgreiches Prüfen garantiert keine spätere Zulassung."
},
"ko":{
"render.cpu_optics_certification":"CPU의 확인과 시작은 캡처한 식별 정보, 불투명한 바디와 면 외관, 요청한 판 또는 축 정렬 상자의 인증을 검증합니다. 경계를 선택하는 것만으로 형상이 인증되지는 않습니다. 시작 시 캡처를 다시 확인하며, 확인에 성공해도 이후 승인이 보장되지는 않습니다."
},
"ar":{
"render.cpu_optics_certification":"يتحقق الفحص والبدء على CPU من الهوية الملتقطة ومظاهر الجسم والأوجه المعتمة وشهادة الصفيحة أو الصندوق المحاذي للمحاور المطلوبة. اختيار حد لا يثبت صلاحية الهندسة. يعيد البدء فحص اللقطة؛ نجاح الفحص لا يضمن القبول لاحقًا."
},
"he":{
"render.cpu_optics_certification":"בדיקה והתחלה ב-CPU מאמתות את הזהות שנלכדה, מראה אטום של הגוף והפאות ואת האישור המבוקש ליריעה או לתיבה מיושרת לצירים. בחירת גבול אינה מאשרת את הגאומטריה. התחלה בודקת שוב את הלכידה; הצלחה בבדיקה אינה מבטיחה אישור מאוחר יותר."
"render.cpu_optics_certification":"Kiểm tra và Bắt đầu trên CPU xác thực danh tính đã chụp, diện mạo thân và mặt đục, cùng chứng nhận tấm hoặc hộp song song các trục được yêu cầu. Chọn biên không chứng nhận hình học. Bắt đầu kiểm tra lại bản chụp; vượt qua Kiểm tra không bảo đảm được chấp nhận về sau."
"render.cpu_optics_enable":"Use these optics on CPU",
"render.cpu_optics_explicit":"Review this assignment and explicitly enable its CPU optical route.",
"render.cpu_optics_fixed":"The installed CPU transport cannot admit this optical sampling request.",
"render.cpu_optics_help":"Temporary CPU optics: fixed or progressive sampling, opaque body and face appearances, certified sheets or axis-aligned boxes. Transmitted shadows, subsurface, coats and maps are unsupported. Box nesting needs explicit opt-in and certification. Accumulation retains the finite-depth transport limits.",
"render.cpu_optics_limit":"CPU supports at most eight optical body assignments.",
"render.cpu_optics_request":"CPU optics require the typed CPU image request and its existing options.",
"render.cpu_optics_saved":"Saved GPU optics cannot be mixed with temporary CPU optical assignments.",
"render.cpu_optics_unsupported":"This CPU route supports glass without transmitted shadows, subsurface, coats or maps. Review the authored options; they have been preserved."
},
"es":{
"render.cpu_optics_boundary":"CPU requiere elegir explícitamente Lámina fina o Caja. La geometría capturada debe superar la certificación.",
"render.cpu_optics_conflict":"Las asignaciones ópticas CPU no pueden sustituir las modificaciones dieléctricas existentes.",
"render.cpu_optics_enable":"Usar esta óptica en CPU",
"render.cpu_optics_explicit":"Revisa esta asignación y activa explícitamente su ruta óptica CPU.",
"render.cpu_optics_fixed":"El transporte CPU instalado no puede admitir esta solicitud de muestreo óptico.",
"render.cpu_optics_help":"Óptica CPU temporal: muestreo fijo o progresivo, aspectos opacos de cuerpo y caras, láminas o cajas alineadas con los ejes certificadas. No admite sombras transmitidas, dispersión subsuperficial, capas ni mapas. Las cajas anidadas requieren activación explícita y certificación. La acumulación conserva los límites de profundidad del transporte.",
"render.cpu_optics_limit":"CPU admite como máximo ocho asignaciones ópticas de cuerpo.",
"render.cpu_optics_request":"La óptica CPU requiere la solicitud de imagen CPU tipada y sus opciones existentes.",
"render.cpu_optics_saved":"La óptica GPU guardada no se puede mezclar con asignaciones ópticas CPU temporales.",
"render.cpu_optics_unsupported":"Esta ruta CPU admite vidrio sin sombras transmitidas, dispersión subsuperficial, capas ni mapas. Revisa las opciones definidas; se han conservado."
},
"de":{
"render.cpu_optics_boundary":"CPU erfordert die ausdrückliche Wahl von Dünner Scheibe oder Quader. Die erfasste Geometrie muss zertifiziert werden.",
"render.cpu_optics_conflict":"Optische CPU-Zuweisungen können vorhandene dielektrische Überschreibungen nicht ersetzen.",
"render.cpu_optics_enable":"Diese Optik auf der CPU verwenden",
"render.cpu_optics_explicit":"Prüfen Sie diese Zuweisung und aktivieren Sie ihren optischen CPU-Pfad ausdrücklich.",
"render.cpu_optics_fixed":"Der installierte CPU-Transport kann diese optische Abtastanforderung nicht zulassen.",
"render.cpu_optics_help":"Temporäre CPU-Optik: feste oder progressive Abtastung, opake Körper- und Flächenerscheinungen, zertifizierte Scheiben oder achsenparallele Quader. Durchgelassene Schatten, Subsurface-Streuung, Beschichtungen und Maps werden nicht unterstützt. Verschachtelte Quader erfordern ausdrückliche Aktivierung und Zertifizierung. Die Akkumulation behält die endliche Transporttiefe bei.",
"render.cpu_optics_limit":"CPU unterstützt höchstens acht optische Körperzuweisungen.",
"render.cpu_optics_request":"CPU-Optik erfordert die typisierte CPU-Bildanforderung und deren vorhandene Optionen.",
"render.cpu_optics_saved":"Gespeicherte GPU-Optik kann nicht mit temporären optischen CPU-Zuweisungen kombiniert werden.",
"render.cpu_optics_unsupported":"Dieser CPU-Pfad unterstützt Glas ohne durchgelassene Schatten, Subsurface-Streuung, Beschichtungen oder Maps. Prüfen Sie die unverändert erhaltenen Optionen."
},
"ko":{
"render.cpu_optics_boundary":"CPU에서는 얇은 판 또는 상자 경계를 명시적으로 선택해야 합니다. 캡처한 형상은 인증을 통과해야 합니다.",
"render.cpu_optics_conflict":"CPU 광학 할당은 기존 유전체 재정의를 대체할 수 없습니다.",
"render.cpu_optics_enable":"이 광학 설정을 CPU에서 사용",
"render.cpu_optics_explicit":"이 할당을 검토하고 CPU 광학 경로를 명시적으로 활성화하세요.",
"render.cpu_optics_fixed":"설치된 CPU 전송 모델은 이 광학 샘플링 요청을 허용할 수 없습니다.",
"render.cpu_optics_help":"임시 CPU 광학: 고정 또는 점진적 샘플링, 불투명한 바디와 면 외관, 인증된 판 또는 축 정렬 상자. 투과 그림자, 표면하 산란, 코팅 및 맵은 지원하지 않습니다. 중첩 상자는 명시적 활성화와 인증이 필요합니다. 누적해도 전송의 유한 깊이 제한은 유지됩니다.",
"render.cpu_optics_limit":"CPU는 최대 8개의 광학 바디 할당을 지원합니다.",
"render.cpu_optics_request":"CPU 광학에는 형식화된 CPU 이미지 요청과 기존 옵션이 필요합니다.",
"render.cpu_optics_saved":"저장된 GPU 광학을 임시 CPU 광학 할당과 혼합할 수 없습니다.",
"render.cpu_optics_unsupported":"이 CPU 경로는 투과 그림자, 표면하 산란, 코팅 및 맵이 없는 유리를 지원합니다. 작성된 옵션을 검토하세요. 옵션은 그대로 보존되었습니다."
},
"ar":{
"render.cpu_optics_boundary":"يتطلب CPU اختيار حد صفيحة رقيقة أو صندوق صراحةً. يجب أن تجتاز الهندسة الملتقطة التحقق.",
"render.cpu_optics_conflict":"لا يمكن لتعيينات البصريات على CPU استبدال تجاوزات العوازل الموجودة.",
"render.cpu_optics_enable":"استخدام هذه البصريات على CPU",
"render.cpu_optics_explicit":"راجع هذا التعيين وفعّل مساره البصري على CPU صراحةً.",
"render.cpu_optics_fixed":"لا يمكن لنموذج النقل المثبت على CPU قبول طلب أخذ العينات البصري هذا.",
"render.cpu_optics_help":"بصريات CPU مؤقتة: أخذ عينات ثابت أو تدريجي، ومظاهر معتمة للجسم والأوجه، وصفائح أو صناديق محاذية للمحاور اجتازت التحقق. الظلال النافذة والتشتت تحت السطحي والطلاءات والخرائط غير مدعومة. تتطلب الصناديق المتداخلة تفعيلًا صريحًا والتحقق. يبقى عمق النقل محدودًا حتى مع التراكم.",
"render.cpu_optics_limit":"يدعم CPU ثمانية تعيينات بصرية للأجسام كحد أقصى.",
"render.cpu_optics_request":"تتطلب بصريات CPU طلب صورة CPU محدد النوع وخياراته الموجودة.",
"render.cpu_optics_saved":"لا يمكن خلط بصريات GPU المحفوظة مع تعيينات بصريات CPU المؤقتة.",
"render.cpu_optics_unsupported":"يدعم مسار CPU هذا الزجاج دون ظلال نافذة أو تشتت تحت سطحي أو طلاءات أو خرائط. راجع الخيارات المحددة؛ فقد تم الاحتفاظ بها."
},
"he":{
"render.cpu_optics_boundary":"CPU דורש בחירה מפורשת בגבול יריעה דקה או תיבה. הגאומטריה שנלכדה חייבת לעבור אימות.",
"render.cpu_optics_conflict":"הקצאות אופטיות של CPU אינן יכולות להחליף דריסות דיאלקטריות קיימות.",
"render.cpu_optics_enable":"שימוש באופטיקה זו ב-CPU",
"render.cpu_optics_explicit":"יש לבדוק הקצאה זו ולהפעיל במפורש את הנתיב האופטי שלה ב-CPU.",
"render.cpu_optics_fixed":"מודל התעבורה המותקן ב-CPU אינו יכול לאשר בקשת דגימה אופטית זו.",
"render.cpu_optics_help":"אופטיקה זמנית ב-CPU: דגימה קבועה או הדרגתית, מראה אטום של הגוף והפאות, יריעות או תיבות מיושרות לצירים שעברו אימות. צללים מועברים, פיזור תת-משטחי, ציפויים ומפות אינם נתמכים. תיבות מקוננות דורשות הפעלה מפורשת ואימות. הצבירה שומרת על מגבלת עומק התעבורה הסופית.",
"render.cpu_optics_limit":"CPU תומך בעד שמונה הקצאות אופטיות לגופים.",
"render.cpu_optics_request":"אופטיקת CPU דורשת בקשת תמונת CPU מטיפוס מוגדר ואת האפשרויות הקיימות שלה.",
"render.cpu_optics_saved":"לא ניתן לערבב אופטיקת GPU שמורה עם הקצאות אופטיות זמניות של CPU.",
"render.cpu_optics_unsupported":"נתיב CPU זה תומך בזכוכית ללא צללים מועברים, פיזור תת-משטחי, ציפויים או מפות. יש לבדוק את האפשרויות שנקבעו; הן נשמרו ללא שינוי."
"render.cpu_optics_fixed":"インストール済みの CPU 光輸送では、この光学サンプリング要求を受け付けられません。",
"render.cpu_optics_help":"一時的な CPU 光学設定:固定またはプログレッシブサンプリング、不透明なボディと面の外観、認証済みの薄板または軸に平行なボックス。透過シャドウ、表面下散乱、コート、マップは非対応です。入れ子のボックスには明示的な有効化と認証が必要です。累積しても光輸送の有限深度制限は残ります。",
"render.cpu_optics_request":"CPU 光学設定には型付きの CPU 画像リクエストと既存のオプションが必要です。",
"render.cpu_optics_saved":"保存済み GPU 光学設定と一時的な CPU 光学割り当ては混在できません。",
"render.cpu_optics_unsupported":"この CPU 経路は透過シャドウ、表面下散乱、コート、マップのないガラスに対応します。設定したオプションを確認してください。内容は保持されています。"
},
"vi":{
"render.cpu_optics_boundary":"CPU yêu cầu chọn rõ ràng biên Tấm mỏng hoặc Hộp. Hình học đã chụp phải vượt qua kiểm chứng.",
"render.cpu_optics_conflict":"Các gán quang học CPU không thể thay thế các ghi đè điện môi hiện có.",
"render.cpu_optics_enable":"Dùng quang học này trên CPU",
"render.cpu_optics_explicit":"Hãy xem lại phép gán này và bật rõ ràng tuyến quang học CPU của nó.",
"render.cpu_optics_fixed":"Mô hình truyền ánh sáng CPU đã cài không thể chấp nhận yêu cầu lấy mẫu quang học này.",
"render.cpu_optics_help":"Quang học CPU tạm thời: lấy mẫu cố định hoặc lũy tiến, diện mạo thân và mặt đục, tấm hoặc hộp song song các trục đã được kiểm chứng. Không hỗ trợ bóng truyền qua, tán xạ dưới bề mặt, lớp phủ và bản đồ. Hộp lồng nhau cần được bật rõ ràng và kiểm chứng. Tích lũy vẫn giữ giới hạn độ sâu hữu hạn của truyền ánh sáng.",
"render.cpu_optics_limit":"CPU hỗ trợ tối đa tám phép gán quang học cho thân.",
"render.cpu_optics_request":"Quang học CPU yêu cầu yêu cầu ảnh CPU có kiểu cùng các tùy chọn hiện có.",
"render.cpu_optics_saved":"Không thể trộn quang học GPU đã lưu với các gán quang học CPU tạm thời.",
"render.cpu_optics_unsupported":"Tuyến CPU này hỗ trợ kính không có bóng truyền qua, tán xạ dưới bề mặt, lớp phủ hoặc bản đồ. Hãy xem lại các tùy chọn đã soạn; chúng đã được giữ nguyên."
"render.preview_environment_fixed":"تتطلب معاينة النموذج دوران بيئة بقيمة 0 وشدة بقيمة 1.",
"render.raster_exposure_help":"يضبط تعريض التصيير النقطي من −32 إلى 32 EV بعد التظليل. يحافظ الصفر على الاستجابة الحالية، دون تغيير الأضواء أو المواد.",
"render.raster_exposure_invalid":"يجب أن يكون تعريض التصيير النقطي قيمة محدودة بين −32 و32 EV."
},
"de":{
"render.preview_environment_fixed":"Die Modellvorschau benötigt eine Umgebungsdrehung von 0 und eine Intensität von 1.",
"render.raster_exposure_help":"Passt die Rasterbelichtung nach der Schattierung von −32 bis 32 EV an. Null erhält die bisherige Darstellung; Licht und Materialien bleiben unverändert.",
"render.raster_exposure_invalid":"Die Rasterbelichtung muss endlich sein und zwischen −32 und 32 EV liegen."
},
"en":{
"render.preview_environment_fixed":"Model Preview requires environment rotation 0 and intensity 1.",
"render.raster_exposure_help":"Adjusts Raster exposure from −32 to 32 EV after shading. Zero preserves the current response; lights and materials stay unchanged.",
"render.raster_exposure_invalid":"Raster exposure must be finite and between −32 and 32 EV."
},
"es":{
"render.preview_environment_fixed":"La vista previa del modelo requiere una rotación del entorno de 0 y una intensidad de 1.",
"render.raster_exposure_help":"Ajusta la exposición Raster de −32 a 32 EV después del sombreado. Cero conserva la respuesta actual; no cambia luces ni materiales.",
"render.raster_exposure_invalid":"La exposición Raster debe ser finita y estar entre −32 y 32 EV."
},
"he":{
"render.preview_environment_fixed":"תצוגת המודל המקדימה מחייבת סיבוב סביבה של 0 ועוצמה של 1.",
"render.raster_exposure_help":"התאמת חשיפת רסטר בין −32 ל־32 EV לאחר ההצללה. אפס שומר על התוצאה הנוכחית; התאורה והחומרים אינם משתנים.",
"render.raster_exposure_invalid":"חשיפת הרסטר חייבת להיות סופית ובטווח שבין −32 ל־32 EV."
"render.raster_exposure_help":"シェーディング後のラスター露出を −32~32 EV で調整します。0 は現在の表示を維持し、ライトやマテリアルは変更しません。",
"render.raster_exposure_invalid":"ラスター露出は −32~32 EV の有限値にしてください。"
},
"ko":{
"render.preview_environment_fixed":"모델 미리보기에서는 환경 회전이 0이고 강도가 1이어야 합니다.",
"render.raster_exposure_help":"셰이딩 후 래스터 노출을 −32~32 EV로 조정합니다. 0은 현재 표현을 유지하며 조명과 재질은 변경하지 않습니다.",
"render.raster_exposure_invalid":"래스터 노출은 −32~32 EV 범위의 유한한 값이어야 합니다."
},
"vi":{
"render.preview_environment_fixed":"Xem trước Mô hình yêu cầu góc xoay môi trường là 0 và cường độ là 1.",
"render.raster_exposure_help":"Điều chỉnh phơi sáng Raster từ −32 đến 32 EV sau khi tô bóng. Giá trị 0 giữ cách hiển thị hiện tại; ánh sáng và vật liệu không thay đổi.",
"render.raster_exposure_invalid":"Phơi sáng Raster phải là số hữu hạn trong khoảng −32 đến 32 EV."
"render.glass_library_help":"Prepares the recipe in the existing editor without assigning an appearance or rendering. CPU needs explicit optical permission and a Thin sheet or Box that passes actual certification. Closed-mesh and shadow settings stay unchanged.",
"render.glass_library_method":"Choose CPU or GPU rendering to prepare physical glass. Raster has no physical-glass route.",
"render.glass_library_prepared":"Physical glass recipe prepared for editing; review its boundary and optical settings before rendering."
},
"es":{
"render.glass_library_conflict":"Este cuerpo ya tiene ajustes ópticos. Edítalos o elimínalos antes de preparar otra receta.",
"render.glass_library_help":"Prepara la receta en el editor existente sin asignar un aspecto ni renderizar. CPU necesita permiso óptico explícito y una lámina o caja que supere la certificación real. No cambia los ajustes de malla cerrada ni de sombras.",
"render.glass_library_method":"Elige renderizado CPU o GPU para preparar vidrio físico. Raster no tiene una ruta de vidrio físico.",
"render.glass_library_prepared":"Receta de vidrio físico preparada para editar; revisa su frontera y sus ajustes ópticos antes de renderizar."
},
"de":{
"render.glass_library_conflict":"Dieser Körper hat bereits optische Einstellungen. Bearbeite oder entferne sie, bevor du ein anderes Rezept vorbereitest.",
"render.glass_library_edit":"Physikalisches Glas vorbereiten",
"render.glass_library_help":"Bereitet das Rezept im vorhandenen Editor vor, ohne ein Aussehen zuzuweisen oder zu rendern. CPU benötigt eine ausdrückliche Freigabe der Optik und eine dünne Scheibe oder einen Quader mit tatsächlicher Zertifizierung. Einstellungen für geschlossene Netze und Schatten bleiben unverändert.",
"render.glass_library_method":"Wähle CPU- oder GPU-Rendering, um physikalisches Glas vorzubereiten. Raster unterstützt kein physikalisches Glas.",
"render.glass_library_prepared":"Glasrezept zur Bearbeitung vorbereitet; prüfe vor dem Rendern seine Begrenzung und optischen Einstellungen."
},
"ko":{
"render.glass_library_conflict":"이 바디에는 이미 광학 설정이 있습니다. 다른 레시피를 준비하기 전에 기존 설정을 편집하거나 제거하세요.",
"render.glass_library_edit":"물리 기반 유리 준비",
"render.glass_library_help":"모양을 지정하거나 렌더링하지 않고 기존 편집기에서 레시피를 준비합니다. CPU에는 명시적인 광학 허용과 실제 검증을 통과하는 얇은 판 또는 상자가 필요합니다. 닫힌 메시와 그림자 설정은 변경하지 않습니다.",
"render.glass_library_method":"물리 기반 유리를 준비하려면 CPU 또는 GPU 렌더링을 선택하세요. Raster는 물리 기반 유리를 지원하지 않습니다.",
"render.glass_library_prepared":"편집할 유리 레시피를 준비했습니다. 렌더링 전에 경계와 광학 설정을 검토하세요."
},
"ar":{
"render.glass_library_conflict":"لهذا الجسم إعدادات بصرية بالفعل. عدّلها أو أزلها قبل تجهيز وصفة مختلفة.",
"render.glass_library_edit":"تجهيز زجاج فيزيائي",
"render.glass_library_help":"يجهّز الوصفة في المحرر الحالي دون تعيين مظهر أو تصيير. يتطلب CPU إذنًا بصريًا صريحًا وصفيحة رقيقة أو صندوقًا يجتاز التحقق الفعلي. تبقى إعدادات الشبكة المغلقة والظلال دون تغيير.",
"render.glass_library_method":"اختر التصيير عبر CPU أو GPU لتجهيز زجاج فيزيائي. لا يدعم Raster الزجاج الفيزيائي.",
"render.glass_library_prepared":"جُهّزت وصفة الزجاج للتحرير؛ راجع حدودها وإعداداتها البصرية قبل التصيير."
},
"he":{
"render.glass_library_conflict":"לגוף הזה כבר יש הגדרות אופטיות. יש לערוך או להסיר אותן לפני הכנת מתכון אחר.",
"render.glass_library_help":"מכין את המתכון בעורך הקיים בלי להקצות מראה או לרנדר. CPU דורש אישור אופטי מפורש ולוח דק או תיבה שעוברים אימות בפועל. הגדרות רשת סגורה וצללים אינן משתנות.",
"render.glass_library_method":"יש לבחור רינדור CPU או GPU כדי להכין זכוכית פיזיקלית. Raster אינו תומך בזכוכית פיזיקלית.",
"render.glass_library_prepared":"מתכון הזכוכית הוכן לעריכה; יש לבדוק את הגבול ואת ההגדרות האופטיות לפני הרינדור."
"render.glass_library_conflict":"Thân này đã có thiết lập quang học. Hãy sửa hoặc xóa chúng trước khi chuẩn bị công thức khác.",
"render.glass_library_edit":"Chuẩn bị kính vật lý",
"render.glass_library_help":"Chuẩn bị công thức trong trình chỉnh sửa hiện có mà không gán diện mạo hay kết xuất. CPU cần cho phép quang học rõ ràng và tấm mỏng hoặc hộp vượt qua kiểm chứng thực tế. Không đổi thiết lập lưới kín và bóng đổ.",
"render.glass_library_method":"Chọn kết xuất CPU hoặc GPU để chuẩn bị kính vật lý. Raster không hỗ trợ kính vật lý.",
"render.glass_library_prepared":"Đã chuẩn bị công thức kính để chỉnh sửa; hãy kiểm tra biên và thiết lập quang học trước khi kết xuất."
"help.render.interactive":"Aktivieren Sie die vorläufige CPU-Vorschau zum Bearbeiten manuell. Einstellungen für das finale Rendering und exportierbare Bilder bleiben unverändert.",
"render.interactive_error":"Fehler in der interaktiven Vorschau",
"render.interactive_feedback_milestones_complete":"Für dieses Rendering sind keine weiteren Vorschauaktualisierungen geplant.",
"render.interactive_feedback_policy":"Vorschauaktualisierungen sind pro Rendering begrenzt; die Einstellungen des finalen Bildes bleiben unverändert.",
"render.interactive_feedback_quota_exhausted":"Limit für Vorschauaktualisierungen dieses Renderings erreicht.",
"render.interactive_feedback_usage":"{started}/{limit} Vorschauaktualisierungen für dieses Rendering gestartet.",
"render.interactive_target":"Zielanzahl an Samples erreicht",
"render.interactive_updating":"Wird aktualisiert"
},
"es":{
"cmd.render.interactive":"Render interactivo",
"help.render.interactive":"Activa explícitamente una vista previa provisional por CPU mientras editas. Los ajustes del render final y las imágenes exportables se mantienen intactos.",
"render.interactive_error":"Error en la vista previa interactiva",
"render.interactive_feedback_milestones_complete":"No hay más actualizaciones de vista previa programadas para este renderizado.",
"render.interactive_feedback_policy":"Las actualizaciones de vista previa se limitan por renderizado; los ajustes de la imagen final no cambian.",
"render.interactive_feedback_quota_exhausted":"Se ha alcanzado el límite de actualizaciones de vista previa de este renderizado.",
"render.interactive_feedback_usage":"Se han iniciado {started}/{limit} actualizaciones de vista previa para este renderizado.",
"render.interactive_final_active":"Render final activo",
"help.render.interactive":"Chủ động bật bản xem trước tạm thời bằng CPU khi chỉnh sửa. Thiết lập kết xuất cuối và các ảnh có thể xuất vẫn được giữ nguyên.",
"render.interactive_error":"Lỗi xem trước tương tác",
"render.interactive_feedback_milestones_complete":"Không còn cập nhật xem trước nào được lên lịch cho lần kết xuất này.",
"render.interactive_feedback_policy":"Số lần cập nhật xem trước được giới hạn theo từng lần kết xuất; cài đặt ảnh cuối cùng không thay đổi.",
"render.interactive_feedback_quota_exhausted":"Đã đạt giới hạn cập nhật xem trước cho lần kết xuất này.",
"render.interactive_feedback_usage":"Đã bắt đầu {started}/{limit} cập nhật xem trước cho lần kết xuất này.",
"render.interactive_final_active":"Đang kết xuất ảnh cuối",
"render.interactive_off":"Tắt",
"render.interactive_on":"Bật",
"render.interactive_partial_dimensions":"Hiển thị {display_width} × {display_height} px · Lấy mẫu {source_width} × {source_height} px · Đầu ra {final_width} × {final_height} px",
"render.interactive_partial_exhausted":"Ngân sách tính toán còn lại không đủ cho một ảnh từng phần nữa.",
"render.interactive_partial_samples":"Mẫu/điểm ảnh {min}–{max} · Đã lấy mẫu {known}/{pixels} điểm ảnh nguồn",
"render.interactive_pause":"Tạm dừng",
"render.interactive_paused":"Đã tạm dừng",
"render.interactive_provisional":"Bản xem trước tạm thời",
"render.interactive_refining":"Đang cải thiện bản xem trước",
"render.interactive_requires_cpu":"Xem trước tương tác yêu cầu dò tia bằng CPU.",
"prefs.render_open_result_on_start":"فتح النتيجة عند بدء التصيير",
"prefs.render_open_result_on_start_help":"افتح النتيجة مرة واحدة بعد بدء التصيير بنجاح. عطّل هذا الخيار للاحتفاظ بالعرض المحدد. يمكنك العودة إلى النموذج أثناء التصيير."
},
"de":{
"prefs.render_open_result_on_start":"Ergebnis beim Renderstart öffnen",
"prefs.render_open_result_on_start_help":"Nach erfolgreichem Renderstart einmal das Ergebnis öffnen. Deaktivieren, um die gewählte Ansicht beizubehalten. Während des Renderns können Sie zum Modell zurückkehren."
},
"en":{
"prefs.render_open_result_on_start":"Open Result when rendering starts",
"prefs.render_open_result_on_start_help":"After starting a render successfully, open Result once. Turn off to keep your selected view. You can return to Model while rendering."
},
"es":{
"prefs.render_open_result_on_start":"Abrir Resultado al iniciar el renderizado",
"prefs.render_open_result_on_start_help":"Abre Resultado una vez tras iniciar correctamente el renderizado. Desactiva esta opción para conservar la vista seleccionada. Puedes volver a Modelo durante el renderizado."
},
"he":{
"prefs.render_open_result_on_start":"פתיחת התוצאה עם תחילת הרינדור",
"prefs.render_open_result_on_start_help":"פתיחת התוצאה פעם אחת לאחר התחלת רינדור בהצלחה. יש לבטל אפשרות זו כדי לשמור על התצוגה שנבחרה. אפשר לחזור למודל בזמן הרינדור."
"prefs.render_open_result_on_start":"렌더링 시작 시 결과 열기",
"prefs.render_open_result_on_start_help":"렌더링이 성공적으로 시작되면 결과를 한 번 엽니다. 끄면 선택한 보기가 유지됩니다. 렌더링 중에도 모델로 돌아갈 수 있습니다."
},
"vi":{
"prefs.render_open_result_on_start":"Mở Kết quả khi bắt đầu kết xuất",
"prefs.render_open_result_on_start_help":"Mở Kết quả một lần sau khi bắt đầu kết xuất thành công. Tắt để giữ chế độ xem đã chọn. Bạn có thể quay lại Mô hình trong khi kết xuất."
"cmd.sketch.construction_line.vertical":"Reta de construção vertical",
"cmd.sketch_arc_center_point":"Arco por ponto central",
"cmd.sketch_arc_tangent":"Arco tangente",
"cmd.sketch_arc_three_point":"Arco por 3 pontos",
@@ -1282,6 +1293,8 @@
"prefs.orientation":"Orientação",
"prefs.overall_speed":"Velocidade geral",
"prefs.preview_choices":"Prévia das suas escolhas",
"prefs.print_face_highlight":"Destaque da face de impressão",
"prefs.print_face_highlight_tip":"Intensidade da cor e do contorno da face de impressão de um corpo na vista. 0 % não mostra destaque.",
"prefs.quality_default":"padrão",
"prefs.quality_fastest":"mais rápido",
"prefs.quality_slowest":"mais lento",
@@ -1561,6 +1574,8 @@
"ui.3d_mouse_step_twist_counterclockwise":"Gire a tampa no sentido anti-horário, segure e solte.",
"ui.3d_mouse_switch_cap":"Calibrar como retorno ao centro",
"ui.3d_mouse_switch_trackball":"Calibrar como trackball",
"ui.3d_mouse_use_direct":"Usar driver direto",
"ui.3d_mouse_use_direct_tip":"Ler o mouse 3D diretamente (hidraw) em vez de pelo spacenavd.",
"ui.3d_mouse_view_axis":"Eixo da vista",
"ui.3d_mouse_view_off":"Desligado",
"ui.3d_mouse_view_off_tip":"O perfil do driver do mouse 3D desliga este eixo, então o movimento dele não move a vista. Escolher aqui o movimento de outro eixo troca os dois, e esse movimento deixa de mover a vista.",
"update.check_unavailable":"A verificação de atualizações não está disponível para esta instalação.",
"update.checking":"Verificando…",
"update.copy":"Copiar",
"update.dmg_opened":"A imagem de disco está aberta e verificada: arraste o SolidCraft para Aplicativos, substituindo a cópia antiga, e reinicie o SolidCraft.",
Loaded 100 of 542 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.