Commit Graph
5467 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 aa87a149f8 smlib crate: the C++ SMLib kernel and its FFI removed
crates/smlib now wraps solidcore alone; the crate keeps its name (the
rename is a later move).
- Gone: the C++ FFI (src/ffi.rs, src/ffi/), build.rs and its `cc`
  build dependency, SMLIB_REV, SMLIB_PREBUILT, the `native` feature, the
  backend routing (src/route.rs: Backend, the choice, SOLIDCRAFT_KERNEL),
  init(), the C API's log and profiler lines, the flat-array handle
  (flat::Flat, Brep::export) and the history records' decoder. Brep is
  solidcore's body; Error loses NotBuilt and Version; set_dump_dir can no
  longer fail. blend_fit/Fit go: only the C++ kernel ever named a fit.
- The `smlib` feature is gone from the kernel, the engine and the apps
  (cli, web, desktop); the kernel's smlib-gated tests and the board fixture
  example run on solidcore, the side-by-side boolean example (a comparison
  with the C++ kernel) is deleted.
- Tests that compared with the C++ kernel are deleted (the parity and
  closed-form halves run on C++, cpp_round_trip, arrays_match_the_cpp_kernel,
  validate_refuses_what_the_cpp_kernel_refuses, the cross-kernel file test,
  the SSI corpus run on C++). Their solidcore-only assertions stay in the
  same files as checks against solidcore: the blend and boolean history
  changes, the offset drafts (one Unsupported, all building), the L sheet's
  thickened volume, the 871 rounds and the moved mitred top. The tests that
  were built only with the C++ kernel and already ran on solidcore (ops,
  sweeps, check, measure, import, export) are ungated.
- tests/KNOWN_FAILING_TESTS drops the six lines of the deleted comparisons.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 18:01:31 -05:00
jyvikoandClaude Opus 5.5 fa1b4a9b9d Kernel choice removed: solidcore is the only kernel
The C++ SMLib kernel goes (owner, 2026-11-02), so nothing chooses a kernel
any more:
- diagnostics.kernel and its schema types (KernelParams, KernelReply,
  KernelChoice) are gone, with their tests;
- the Geometry kernel preference and its section of the Design page are
  gone, with assets/locales/pending/geometry-kernel.json. A saved
  preference file that still names a kernel loads without error and the
  key is ignored, like any removed setting
  (saved_preferences_with_a_removed_setting_still_load);
- the model cache records "solidcore" as the kernel that computed it, so a
  cache an earlier build wrote on the C++ kernel is still a miss;
- the CLI test of a cache saved on one kernel and opened on the other is
  gone (the io test covers the miss).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 17:56:35 -05:00
jyviko 4757402675 Merge #11351 at 084695416: exact-box culls, the rig cases and exemptions for main's new commands
# Conflicts:
#	tests/KNOWN_FAILING_TESTS
2026-11-02 17:38:17 -05:00
jyvikoandClaude Opus 5.5 0846954169 Kernel rig: export and print face cases in the import area
- file.export_step, export_stl, export_3mf, export_obj: a 30x20x10 box
  written and read back (the meshes converted to a solid): V 6000,
  A 2200, 6 faces, box (5,-10,0)-(35,10,10).
- file.export_urdf: a hinged arm on a grounded base: 3 links, 2 joints,
  and the base's mesh, written in metres, reads back as the
  1 x 0.5 x 0.2 box (V 0.1, A 1.6).
- body.print_face: a cylinder's flat end is accepted, its side refused.

PATHS adds the URDF writer and the print face modules.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
archive/merge-main-develop
2026-11-02 17:34:24 -05:00
jyvikoandClaude Opus 5.5 c1f45cae2e Kernel rig: assembly cases for mass properties, align, find limits and moving items between parts
- assembly.mass_properties: two boxes (2 g/cm3) in a rigid group: mass
  0.006 kg, centre (18.333,5,5), inertia diag(0.1, 1.0333, 1.0333) kg mm2
  by the parallel-axis theorem.
- occurrence.align: a block's end face onto a base's top face: a quarter
  turn about y, centre (70,20,20), box (65,15,10)-(75,25,30).
- joint.find_limits: a slider between two stops: min -20, max 10 mm.
- component.move_features, browser.reparent and
  component.move_sketches.to_parts: items moved into a turned and moved
  part keep their world place (volumes, centres and boxes by hand).

The mass case assigns a material it creates, so material.create and
material.assign leave EXEMPT. PATHS names the new command modules.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 17:34:24 -05:00
jyvikoandClaude Opus 5.5 21db090bab Kernel rig: construct.plane.axis_point gets construction cases
The plane through a box edge and its far corner, graded against its
closed-form normal (0,-2,3)/sqrt(13) through the origin, and the refusal
of a point on the axis.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 17:34:24 -05:00
jyvikoandClaude Opus 5.5 d2b2023071 Kernel rig: main's new view, rendering, appearance and settings commands are exempt from a case
62 of the commands main added change no geometry: the view and render
panes, rendering lights and results, appearance tools, settings profiles,
point clouds (drawn as points, never a body), the selection, two sketch
edits, component links and History bar visibility, edit.repeat,
timeline.play, inspect.compare_picture (a picture against the outline),
and component.paste_from_design, which pastes the app's cross-window
clipboard that no command fills. Each joins EXEMPT's first section under
its family's reason.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 17:34:24 -05:00
jyvikoandClaude Opus 5.5 5acbd2e714 Cuts leave the bodies their tools can't reach, by exact boxes (#10225 on exact geometry)
- The per-target cut loop skips a body whose exact box lies clear of
  every tool's, as main's version did with mesh boxes. The sheet culls
  (#10226, #10301) and this one now leave the far sheets and bodies alone:
  a_cut_leaves_bodies_it_cannot_reach_as_they_were passes and leaves the
  known-failing list.
- a_cut_still_runs_where_its_tool_touches_grazes_or_meets_a_curved_face:
  a tool 0.5 µm clear of the block is now left out (exact boxes; 0.5 µm is
  far past the bodies' tolerances); touching and 0.1 mm in still cut.
- Known failing, with reasons: main's edge lookup by a stored point
  (#11286, on the display mesh) is not taken; SMLib refuses the
  wrong-way chamfer for its tangent chain first.
- EXEMPT: main's eight new sketch-only commands.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 17:25:13 -05:00
jyvikoandClaude Opus 5.5 7ad1d3e125 diagnostics.kernel takes a typed contract, as main's other diagnostics commands do
Its choice (solidcore or smlib) and its reply ({choice, environment}) get
schemas; a bad choice is refused with the handler's message.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 16:58:17 -05:00
jyviko 3483d1af01 Merge #11351 at e6a4b0a9a: main's sketch-only commands exempt from a kernel case 2026-11-02 16:50:37 -05:00
jyvikoandClaude Opus 5.5 e6a4b0a9ae Kernel rig: main's six new sketch-only commands are exempt from a kernel case
sketch.construction_line (and its horizontal and vertical forms) and
sketch.spline.insert_point, remove_point and reverse change only the 2D
sketch.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 16:50:12 -05:00
jyvikoandClaude Opus 5.5 25175d68ca Merge #8526 (brett19/solidcore e30cfd2ac): solidcore as the default kernel, C++ SMLib behind --features smlib
Three conflicts:
- crates/smlib flat.rs and export.rs: #8526's export copies the C++
  arrays by id range; the ranges now run to the ball-patch arrays
  (FACE_DEFINITION_REAL_COUNT, FACE_DEFINITION_REALS), with
  WIRE_EDGE_NURBS_FORM (35) and FACE_DEFINITION_REAL_COUNT (36) both kept.
- tests/KNOWN_FAILING_TESTS: solidcore's lines and develop's, each test
  once; tests/KNOWN_FAILING_TESTS.smlib takes develop's SMLib a18bbe5 lines
  too. The first full run trims both.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 16:42:23 -05:00
jyvikoandClaude Opus 5.5 2b2ab66271 Cargo.lock: develop's profile, smlib and step crates at main's 0.30.1
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 16:37:31 -05:00
jyviko c533128ebe Merge remote-tracking branch 'upstream/main' into merge-main-develop
# Conflicts:
#	crates/doc/src/eval.rs
#	crates/doc/src/name_lookup.rs
#	crates/doc/src/sheet.rs
2026-11-02 16:28:15 -05:00
jyviko 6556876ace Merge remote-tracking branch 'upstream/develop' into merge-main-develop
# Conflicts:
#	tests/KNOWN_FAILING_TESTS
2026-11-02 16:24:33 -05:00
jyvikoandClaude Opus 5.5 f3b507c056 Known failing: the 14 cargo tests SMLib v1.1.0-alpha fails, with what each sees; two cases that pass now
Develop's CI after the a18bbe5 pin (run 41522001173) fails 14 tests that
passed on f916a8d, and passes two listed ones. Each new line says what the
test sees on v1.1.0-alpha; v1.1.0-alpha.1 fixes the setback hole's cause.
shell_tangent_chain_that_opens_every_face_explains_how_to_keep_walls and
oracle 37-pyramid-apex-blend pass and leave their lists.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
develop-pre-reset-2026-11-04
2026-11-02 16:24:16 -05:00
jyvikoandClaude Opus 5.5 5f4d700610 After the merge with main: its new code on develop's exact bounds, types and thread fields
- The sheet cut's cull (#10301) and the tapped wall's (#10227) use each
  body's exact box (`exact_box`), not its display mesh.
- model.threads replies with develop's thread fields: form, hand (right,
  left or both) and starts.
- surface.boundary's schema checks a network curve's continuity as the
  handler does, and words a list entry's error as it does.
- Main's new tests take develop's Hole fields and world_state's Result.
- mesh-decisions: contact_sweep's triangle check is now `depth` (main
  split `hits`).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 16:19:46 -05:00
jyviko 98a6f591eb Merge remote-tracking branch 'upstream/main' into merge-main-develop
# Conflicts:
#	crates/doc/src/eval_more.rs
#	crates/doc/src/placement_reuse.rs
#	crates/engine/src/cmd/contact_sweep.rs
#	crates/engine/src/cmd/diagnostics.rs
#	crates/engine/src/cmd/inspect.rs
#	crates/engine/src/cmd/sheet_tests.rs
#	crates/engine/src/cmd/sketch_inspect.rs
#	crates/engine/src/cmd/view_navigation.rs
#	crates/engine/src/schema/diagnostics.rs
#	crates/engine/src/schema/diagnostics_tests.rs
#	crates/engine/src/schema/mod.rs
#	crates/ui-egui/src/sketch_line_arc.rs
2026-11-02 15:54:06 -05:00
jyviko 3cbcf0315a Merge remote-tracking branch 'upstream/develop' into merge-main-develop
# Conflicts:
#	tests/kernel-cases/fillets/KNOWN_FAILING
2026-11-02 15:45:18 -05:00
jyvikoandClaude Opus 5.5 2bf58241fd Kernel ladder: a golden case marked unstable is gated on its status, and 06/018 is marked
On SMLib v1.1.0-alpha, 06/018 makes 597 or 594 edges from the same input:
the union's post-process keeps pointers to edges it has deleted. A golden
entry's `unstable` reason makes the gate compare that case's status only
and name it in its output; recording keeps the reason, and only an edit of
the golden removes it. v1.1.0-alpha.1 fixes the cause and removes the mark.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 15:44:41 -05:00
jyvikoandClaude Opus 5.5 62d372cc16 Kernel ladder: 07/021 and 06/018 recorded as they are on SMLib v1.1.0-alpha, each with its reason
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 15:44:41 -05:00
jyvikoandClaude Opus 5.5 c29190ec35 Kernel rig: the fillet and ladder results on SMLib v1.1.0-alpha, the new failures recorded with their reasons
Fixed (off the known-failing list): the Mixed corner's peg cases and the concave arc with the front top edge (smlib #123), and the 40° boss junction (smlib #124). Eight cases in all.

New failures, recorded as they are, each with its reason. They passed on f916a8d.
- **Six cases grade a blend seam G0 where G1 (or G2) is wanted,** at the end of the round's contact seam, after smlib #124's End at a smooth vertex. Two of them also shift in volume.
- **Four cases come back unsupported** after smlib #125, which leaves setbacks to the Setback's corners only.
- **Ladder 07/012** makes 9 faces, 20 edges and 13 vertices, where its golden had 8, 18 and 12. Its golden entry is the new result, with the reason added.

Whether each change is by design or a defect is being established. A defect is fixed in solidcore, where the End and the Setback are being brought over (#2364, #2365), not in the frozen SMLib.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 15:44:41 -05:00
jyvikoandClaude Opus 5.5 4e01031bc7 smlib export tests: rustfmt's line for the rounded cube's edge midpoints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 15:44:41 -05:00
jyvikoandClaude Opus 5.5 d3902c954d SMLib: pin v1.1.0-alpha (a18bbe5): the generic blend's step-4 corners, the Ball's sphere patch through the flat arrays, all-target CI
Since f916a8d:
- #120: every target again, plus the warnings fix;
- #121: the Ball's patch as flat kind 6 with its sphere, read by the previous commit;
- #122: tests gated on counts;
- #123: the Mixed corner;
- #124: the End at a smooth vertex;
- #125: four or more rounds, and open setbacks;
- #126: the equal-area thumbweight guard;
- #127: the trunk merge.

The SMLIB_PREBUILT checksums are from the release prebuilt-a18bbe5…, written by `scripts/fetch-smlib.sh --pin`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 15:44:41 -05:00
jyvikoandClaude Opus 5.5 653c16e6f5 Native B-rep: a ball patch is its own surface kind, read from and written to SMLib's flat kind 6
SMLib's flat arrays now carry the corner of three equal rounds as `SURFACE_BALL_PATCH` (kind 6): its net as a NURBS face's block, with its sphere's centre and radius as its definition (ids 36 and 166). The record reads it as `ball_patch {center, radius}`, a label like the analytic kinds, with the net as its `nurbs`. A plain sphere with a form won't do: the net is not a piece of SMLib's sphere NURBS, so SMLib's `IsNurbSurfaceSphere` would refuse it.

Written back, a ball patch is kind 6 with the same definition, which SMLib takes once its net is certified on that sphere. Elsewhere:
- Offsets classify it as its sphere, so its offsets stay exact and collapse at the centre.
- Face kinds count it as a sphere: fillet_three_edges_at_a_corner's corner is now `sphere`, no longer `other`.
- STEP, which has no ball-patch entity, gets the net as the face's B-spline surface, pcurves included.
- Iso curves and SSI of the label are refused; the face's form is what evaluates.

Test: a_rounded_cubes_ball_patches_go_round_with_their_spheres. The cube's eight corners are ball patches about the corners pulled in by r. Points of each patch lie on its sphere to 1e-12. The patches are kind 6 again after import, with the same definitions bit for bit, and the closed-form volume holds.

Format: pending/ball-patch-faces.rs. Docs: docs/native-brep.md and the rig README's `surface_types` (`ball_patch`).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 15:44:41 -05:00
github-actions[bot] 78b95a71b3 Regenerate generated files and fold pending files [skip ci] 2026-11-02 20:23:04 +00:00
bherbruckandClaude Opus 5.5 59ffd38019 Timeline: selecting a joining extrude no longer lights round walls an earlier feature made (#11263) (#11286)
A join that reports no history names faces by comparing the meshes before and
after. When the join makes the body bigger, round walls are meshed differently
and miss their old mesh at the naming tolerance, so they were named as the new
feature's faces. A curved face with no match now looks again within the two
meshes' chord tolerances. An edge name saved while a wall had the wrong name
falls back to the edge at its stored point.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 19:40:17 +00:00
github-actions[bot] 331a8526ef Regenerate generated files and fold pending files [skip ci] 2026-11-02 21:04:23 +00:00
semmelrindeandClaude Opus 5.5 5e54681c80 Sketch: instances stepped in from an arc stop where the arc runs out, not turn round (#11068)
* Sketch: instances stepped in from an arc stop where the arc runs out, not turn round

Each instance after the first takes its side from a point one more step
past the last one. Stepping toward an arc's centre past an arc smaller
than the distance, that point lands beyond the centre, and the side was
read by comparing the point with the two offsets at the full distance:
the one toward the centre doesn't exist there, so the other won and the
next instance went back out onto an earlier one. The side is now read a
hair from the curve, where both offsets exist, and the point stops
halfway to the centre. The arc then runs out of room and the command is
refused there, as for a ring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Offset side: read off the picked line or arc itself

A tiny step compared at large coordinates rounds away, and an arc left
smaller than that step by an earlier instance still has no offset toward
its centre: both turned the side round. A line's side is now its
half-plane and an arc's inside or outside its circle, as a circle's
already was; other curves compare both offsets' distance as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 19:40:16 +00:00
Mateusz SychandMateuszSychXpl 7bdaec8f4d Joints: large assemblies with many closed loops no longer leave a new joint in conflict (#9687) (#11146)
* claim: #9687

* Joints: Edit Joint and Unsuppress meet a conflicting loop joint as Joint does (#9687)

joint.create (#10371) turns an angle a half turn when a new loop-closing joint
comes out as a conflict, so a second planar joint whose faces point the same way
meets. joint.edit never did, so a design saved before that (the report's rail on
two planar joints) kept the conflict however the joint was edited, and a joint
unsuppressed after its part was turned away stayed one too, though Move's hint
says to edit the conflicting joint.

An edit that places the joint again (type, offset, angle, flip, a side, or
unsuppressing it) now tries the same half turns. A rename alone moves nothing.

* Joints: a loop group over the solver's values still moves the loops that need to (#9687)

A frame held by many planar joints (the report's printer: six planar joints
between two profiles, and more) ties its loops into one group through the
shared values. Past MAX_LOOP_VALUES (64) such a group was only checked, so a
new joint closing a loop in it (Joint35, the rail on the 450 mm profile, which
took the group from 63 to 69 values) stayed a conflict, and nothing in the
group could be driven or dragged any more.

Such a group now moves the values of the loops that need to move, those open
at the start or reading a held value that moves, when they are few enough,
while every loop of the group stays a residual, so the others stay closed.
Groups within the cap solve as before.

* Joints: closed loops through a moving value follow on their own closing joint (#9687)

In a loop group over the solver's values, a closed loop that runs through a
value the open or driven loops move (a part slid on one planar joint and held
by a second) kept its closing joint's values, so its gap opened and the solve
failed. Those closing joints' values move too: they are on no tree path, so
freeing them pulls in no further loop.

* Joints: loops a motion link ties to a following closing joint follow too (#9687)

A followed closing joint whose value a motion link sets moves the value its
link chain starts from; closed loops through that value now follow on their own
closing joints as well, until no more do or the values pass the solver's cap.

* Joints: say what the narrowed loop solve does not find (#9687)

* Joints test: measure the peg's 30 degree turn from where the loop left P0 (#9687)

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-11-02 19:38:17 +00:00
ABDULLAH 990867cd80 Arabic: one spelling of component in the Components from Bodies hint, history filters, delete prompt and appearance help; profile row labels; tanween in the components-start-open note; OK button name in the Find Limits hint (#11098)
* Arabic: one spelling of component in the Components from Bodies hint, history filters, delete prompt and appearance help

The catalog writes component as مكوّن (with shadda) in 68 places; five
messages used مكون. They now match.

* Arabic: included-settings label and computer term in the profile rows

* Arabic: tanween spelling in the components-start-open note

* Arabic: OK button name in the Find Limits hint
2026-11-02 19:35:53 +00:00
P'tite TêteandP'tite Tête b818d7043d docs: Nommage des copies de motifs et de miroirs dans la référence de modélisation (#11160)
- Les motifs rectangulaire et circulaire prennent bodies et nomment leurs copies source (2), (3)…, en sautant les noms pris
- Motif de features : nouveau BodyN, comme le miroir ; noms lus dans created_bodies
- Miroir d'une copie : suffixe ajouté ; body.rename pour des noms stables ; renvoi à #8194

Co-authored-by: P'tite Tête <asso@ptitetete.com>
2026-11-02 19:34:13 +00:00
brett19andClaude Opus 5.5 e30cfd2acf Tests and the rig for a default build without the C++ kernel
- step_in's a_solid_smlib_refuses_with_its_faces_is_refused_not_meshed assumed
  a build without SMLib has no kernel; on solidcore the cube imports, so it
  now runs only under SOLIDCRAFT_KERNEL=smlib and says it skipped otherwise.
- rounds_on_the_871_part and mitred_rounds_follow_a_moved_top compare with
  the C++ kernel (listed in tests/KNOWN_FAILING_TESTS) when it is built; their
  solidcore half runs as *_on_solidcore on a build without it, so each list
  entry is graded only where its comparison runs.
- kernel-cases without --cli builds the CLI once (with --features smlib when
  a run asks for the C++ kernel) before the cases, so the first cases don't
  spend their timeout compiling it.
- rustfmt for diagnostics.kernel's message.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEtwSrdwZxqTQp5MfnU
2026-11-02 12:30:22 -07:00
dudedagger42andClaude Opus 5.5 6be5be7f0c Keys: option to keep model keys out of sketches (#7675)
* Keys: a sketch and the model kept apart on Scope

`command_for` fell back to the first enabled command bound to a key, so a model key pressed in
a sketch (F, Fillet) still ran the model command. A key now runs only a command of the scope
the view is in, or one that works everywhere; otherwise nothing fires. Inspecting, views and
file commands (`inspect.*`, `view.*`, `file.*`) count as everywhere, so Measure's I still works
in a sketch. #4432's `sketch_and_model_keys_are_kept_apart` is ported to `Scope`.

Not ready: main's `the_extrude_key_in_a_sketch_finishes_the_sketch` (#2815) expects E in a
sketch to finish it and open Extrude, which this rule stops.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Keys: keep model keys out of sketches as an opt-in preference

The strict sketch/model split is now Preferences > Shortcuts > Keep model
keys out of sketches, off by default. Off, a key resolves exactly as on
main (a feature key such as E still finishes the sketch). On, a sketch
runs only sketch keys and keys that work everywhere (inspect, view, file).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* rustfmt

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 19:24:51 +00:00
e4cae82274 Preferences redesign 5/11: Appearance (#9877) (#10580)
* Redesign Appearance preferences

* Reach the theme Import card by paging the carousel in the VFS import test

The redesigned Appearance page puts Import as the last theme carousel card,
so the test scrolled the page to a card that was not drawn. Page the carousel
until the card is on screen; both the in-scope and out-of-scope picks are
still checked.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 19:19:33 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 0d8eebbea6 Sheet metal: a hole leaves sheet parts it cannot reach untouched (#10226)
A hole in a design with sheet metal first tried to bore every sheet of its
component, building each panel and running a boolean on it, and then
checked every sheet again to see whether the drill met it at all. For a
sheet far from the hole both only found nothing: with 50 sheet parts that
was most of a hole's time. Now a sheet whose box lies clear of the
drill's box is left out of both, with the same grown boxes the other
sheet cuts use, so a drill into a sheet's rim still bores it. A drill a
sheet would refuse whatever it meets (an invalid one, or one more bore
than a sheet may hold) is still put to every sheet as before.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 19:14:28 +00:00
semmelrindeandClaude Opus 5.5 1721cb0a4c Croatian: translate the 78 messages main gained after batch 11, the Assistant's model picker and render comparison included (batch 12) (#11011)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 19:01:22 +00:00
semmelrindeandClaude Opus 5.5 3742b1a008 Romanian: translate the 79 messages main gained after batch 11, the Assistant's model picker and render comparison included (batch 12) (#11019)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 19:00:53 +00:00
semmelrindeandClaude Opus 5.5 3bf29b9787 Dutch: translate the 78 messages main gained after batch 11, the Assistant's model picker and render comparison included (batch 12) (#11018)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:59:40 +00:00
semmelrindeandClaude Opus 5.5 10bc1afec2 Hungarian: translate the 79 messages main gained after batch 11, the Assistant's model picker and render comparison included (batch 12) (#11012)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:57:59 +00:00
semmelrindeandClaude Opus 5.5 861fb8ad56 Hole: a countersink cuts nothing outside its diameter above the face (#5041) (#8261)
The countersink tool was a cone started at the run-on height above the
face, so above the face it was wider than the countersink and kept
widening: a wall or step just past the rim was notched. The tool is now
one revolved profile: the cone from just above the face down into the
hole, and above it a cylinder of the countersink's own diameter. The cone
is the profile's first segment, so its face keeps the name csink:side:0.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:55:37 +00:00
leValdemar19andClaude Opus 5.5 f7d66d2b5b Sketch Break: break at a shared point separates the curves that meet there (#7410) (#7950)
* claim: #7410

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Break: break at a shared point separates the curves that meet there (#7410)

Two lines drawn as one chain share their corner point. There was no way to pull them apart:
Break there said "nothing to break at there", and deleting the point deleted both lines.

sketch.break aimed at a point where the picked curve ends and another curve also meets now
gives the picked curve its own end there (`<curve>.start` or `.end` when that id is free), at
the same place: both curves stay where they are and are no longer joined. The Break tool
snaps a click on the corner to that point, so clicking it works the same way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:53:04 +00:00
austin62jakeandClaude Opus 5.5 ce6ad21106 macOS update: say to quit SolidCraft before replacing it (#7584) (#7886)
* claim: #7584

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* macOS update: say to quit SolidCraft before replacing it (#7584)

After Download and open, the update window told people to drag SolidCraft
to Applications, replacing the old copy, then restart it. Finder refuses to
replace an app that is running ("the item “SolidCraft” is in use"), so the
message now says to quit SolidCraft first, then drag the new copy over and
open it again. "Quit" rather than "close": closing the window on macOS can
leave the app running.

The id update.dmg_opened is unchanged; every catalog that carries it is
updated, and the user guide's update tables get the same step.

Fixes #7584.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-02 18:50:09 +00:00
semmelrindeandClaude Opus 5.5 71bb2c58a4 Czech: translate the 78 messages main gained after batch 11, the Assistant's model picker and render comparison included (batch 12) (#11008)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:49:12 +00:00
semmelrindeandClaude Opus 5.5 da9960e366 Russian: translate the 79 messages main gained after batch 11, the Assistant's model picker and render comparison included (batch 12) (#11020)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:49:11 +00:00
semmelrindeandClaude Opus 5.5 7b8174cb88 Danish: translate the 78 messages main gained after batch 11, the Assistant's model picker and render comparison included (batch 12) (#11009)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:49:05 +00:00
semmelrindeandClaude Opus 5.5 ef8e4d4195 Galician: translate the 79 messages main gained after batch 11, the Assistant's model picker and render comparison included (batch 12) (#11010)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:48:57 +00:00
semmelrindeandClaude Opus 5.5 703509bf89 Indonesian: translate the 79 messages main gained after batch 11, the Assistant's model picker and render comparison included (batch 12) (#11013)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:48:21 +00:00
semmelrindeandClaude Opus 5.5 60cb0c7342 Italian: translate the 78 messages main gained after batch 11, the Assistant's model picker and render comparison included (batch 12) (#11014)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:48:13 +00:00
semmelrindeandClaude Opus 5.5 71d34b9b15 Malay: translate the 79 messages main gained after batch 11, the Assistant's model picker and render comparison included (batch 12) (#11015)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 18:48:06 +00:00