* Snap points: a flat face offers its corners, edge middles and every hole's centre (#11476) A flat face now offers its whole outline as snap points, read from the exact faces and edges: every corner, the middle of every straight edge and the centre of every round edge, holes included, as well as the centre of its area. Corners on a closed circle's seam, or where the kernel split one circle into pieces, are left out. snap_points_from gives each point with where it came from (SnapSource): the face it was picked on, the face's outward normal and a point inside its edge, so a tool can keep the point by name (joint.create's edge, corner and on) and turn a frame to the face. SnapPoint itself does not change, so code that builds one keeps compiling. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Snap points: a round face's end centres say which way their end faces (#11476) The centres at a cylinder's or cone's two ends now carry a normal in their SnapSource: the axis pointing out of that end, which is the normal of the face a hole opens onto or of a pin's end. A joint origin taken from one can then lie on that face, as the centres a flat face offers already do. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Snap points: a hole centred on its face keeps its own point and rim (#11476) Snap points were one point when they lay at one place, whatever their kind, so a hole centred on its face was lost behind the face's centre, and with it the rim its point keeps. Now only points of one kind are merged: the face's centre and the hole's centre both stay, and only the hole's has its rim. SnapSource::normal's doc now says it is also the axis out of a cylinder's or cone's end. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Snap points: a washer's two rims keep a centre each (#11476) Centres at one place are one point only when they are on one circle: the inner and outer rims of a washer face now keep a centre each, with its own rim, while the pieces the kernel split one circle into are still one point. SnapSource::normal's doc now says that at a round face's end it is the axis out of that end of the face, which at a blind hole's bottom points into the material below, not out of it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Snap points: rims are told apart by their radii's size, not their place (#11476) Two centres at one place were one circle when their rims' radii differed by less than the place's tolerance, which grows with the distance from the origin: 60 m out, rims of 4 and 4.05 counted as one and one lost its point. The radii are now compared with a tolerance from the radii themselves. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Snap points: nearby points stay apart far from the origin (#11476) Points of one kind at one place were merged within a tolerance of 1e-6 of their distance from the origin, 0.06 mm at 60 m, so two small holes there whose centres are 0.05 apart lost one centre. Places now use 1e-9 of that distance (0.06 µm at 60 m): well above the rounding of coordinates and of a circle fitted to an imported edge, so a point found twice is still one, and far below any feature. The radii keep their own tolerance. The merge is its own function, so its test can give it points directly. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Alfonso Tamés <mufufu@Mufufu-MacBook-Pro.local> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
SolidCraft
An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension
and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents
model through the built-in MCP server.
Website ·
Download ·
Try it in the browser ·
Documentation ·
Discord ·
SolidCore
A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.
Download
- Windows: the installer.
- macOS: the disk image (Apple silicon and Intel).
- Linux: the AppImage, or
sudo snap install solidcraft(Snap Store). - Web: try it in your browser, no install.
ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The macOS app is signed with a Developer ID and notarized by Apple. The Windows downloads aren't signed yet: choose More info, then Run anyway in SmartScreen. On SolidCraft 0.11 to 0.14, download once by hand; see updating.
What works
Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.
- Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
- Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
- Parameters and configurations with unit-aware expressions.
- Assemblies with joints, motion studies, contact sets, interference and mass properties.
- Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
- Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export,
.scdesigns (.solidcraftfiles from earlier releases still open). - Desktop app, browser app, headless CLI and MCP server, all running the same commands.
The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.
Build from source
cargo run --release -p solidcraft -- --sample # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci # fmt, clippy, tests, icons, assets, layers, wasm
More commands, the Windows cross-build and the browser build are in docs/building.md.
AI agents (MCP)
solidcraft-cli mcp is a Model Context Protocol server. Headless it
runs its own design session, or with --connect it drives the running app so you can watch.
Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find
solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default
"C:\\Program Files\\SolidCraft\\solidcraft-cli.exe"). Tools, access rules and an example session:
docs/mcp.md.
Scripts
A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run.
Format and example: docs/scripts.md. Pages can also be driven through the
browser command API.
Contributing
Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.
Sponsors
SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.
Disclaimer
The files in this repository are provided as is, without warranty, liability or indemnity, and Tangency Labs and the contributors accept no responsibility for any harmful or unlawful use of them: read DISCLAIMER.md.
Licence
MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.
SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

