Commit Graph
4539 Commits
Author SHA1 Message Date
Dahak BuildsandDahak Builds dcbedbd805 Don't blindly reopen a design that stopped the last session (#5064) (#10443)
A design that crashes or hangs the app while it is being reopened was
reopened blindly every launch, bricking the app each time. A launch that
reopens designs now marks them in the recovery folder; the marker is
cleared as each design finishes opening. A launch that finds the marker
left behind skips those designs once and says which one the last session
stopped on, so the app starts usable and the loop breaks.

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-04 17:16:15 +00:00
Dahak BuildsandDahak Builds 9bb216a357 Ribbon: only switch the tab when a command actually starts (#10540) (#10549)
* claim: #10540

* Ribbon: only switch the tab when a command actually starts (#10540)

select_command_tab ran before the command's own checks, so a command that
only reports a missing parameter or nothing to work on still moved the
ribbon. The ribbon now moves when the command starts and a refused command
puts the tab back, as a disabled command already never leaves it. View
display toggles and choices menus keep the ribbon's tab however they are
started, matching F6, the navigation bar and the view cube.

Written by Qwen.

* rustfmt (#10540)

Written by Qwen.

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-04 17:16:09 +00:00
github-actions[bot] fd9b3fd9f2 Regenerate generated files and fold pending files [skip ci] 2026-11-04 18:00:54 +00:00
Mateusz SychandMateuszSychXpl 6488a540c9 Windows: a lost graphics device restarts the app instead of crashing (#10240) (#11109)
* claim: #10240

* Lost GPU: a loss met by a queue write restarts the app instead of crashing (#10240)

The per-frame probe (#6528) finds a device the driver reset before the
frame's uploads, but the driver resets a device at any moment: a reset
that lands after the probe is still met first by a queue write or the
present, and wgpu-core unwraps the driver's Lost there
(PendingWrites::activate) instead of losing the device. That panic
ended the app and wrote a crash report.

- egui-wgpu: the painter runs each frame under DeviceLost::survive. A
  panic the frame meets is taken for the loss once the probe then finds
  the device lost (the probe's path loses the device and runs its lost
  callback); the painter draws nothing more and the app restarts as for
  any lost device, keeping unsaved changes for recovery. Any other panic
  carries on unwinding.
- Crash reports: a panic inside wgpu-core that unwraps Lost is the
  device loss, not a bug, and is not reported. A command that meets it
  fails; the next frame's probe restarts the app.

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-11-04 17:15:58 +00:00
froglemonade2andClaude Opus 5.5 3e70ad9876 View navigator: right-click to choose Axes, Cube or a Custom body (#10266)
* View navigator: a custom body as the navigator, and a right-click menu to switch types

A right-click anywhere on the view navigator opens a menu with its three types: Axes, Cube and
Custom. Custom opens the Custom View Navigator panel (a feature panel with OK and Cancel): pick a
body in the view, its texture (Themed: the cube's colours; Modeled: the body's own appearance and
the view's edge colour), and whether the cube's rotation arrows and Home button go around it. The
navigator previews the panel's choices while it is open; Cancel leaves it as it was.

The custom navigator draws the body at the cube's size through a small depth-buffered raster, so
hidden faces stay hidden; hovering a face highlights it, a click looks straight at it (and frames
the model with navigator_fit on), a drag orbits. Until a body is chosen it draws the cube.

The body is kept as a packed snapshot (16-bit, base64) with the preferences and in settings
profiles, so it stays across runs and designs and travels with an exported profile. Bodies over
10,000 triangles, and long or flat ones (thinnest width under a fifth of the widest), are refused.

New command view.navigator (style, body, texture, arrows, home) does the same without opening
anything; new preferences navigator_texture, navigator_arrows and navigator_home, and a Custom
choice for navigator_style. Defaults are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: a hovered face in Modeled takes the view's selection colours

In the Modeled texture the face under the pointer is filled and outlined the way the view selects
a face of the model (sel_face, sel_edge), not in the cube's hover blue and accent, which Themed
keeps.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: a hovered face in Modeled lights up as the view's mouse-over does

The face under the pointer keeps its own colour, a little lighter (hover_face_lift) and still
shaded, with its edges in the view's mouse-over edge colour (hover_edge), as the 3D view shows a
face under the pointer; not the selection colours. Themed keeps the cube's hover blue and accent.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: rotation arrows and Home on by default

navigator_arrows and navigator_home start on, so a new custom navigator has the cube's arrows and
Home button around it; the Custom View Navigator panel turns either off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: the strings in every complete language, and test fixes

- The new messages in Arabic, Hebrew and Vietnamese (complete catalogs, like Japanese and Chinese).
- The navigator's raster goes through one colour helper, listed with its reason among the files
  allowed colour literals (the design's appearance shaded into pixels).
- nav_settings joins the requested-icon manifest (the view.navigator command's icon).
- A visible edge piece is kept only when the stretch seen with it, across the edge's segments, is
  at least two samples long: a hidden edge no longer shows a sliver at a silhouette corner.
- The navigator layout test treats Custom without a body as the cube it draws; the panel and
  size tests no longer assume an empty undo list, the style before opening, or a coarse sphere.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: profiles carry its texture, arrows and Home

Settings profiles keep a fixed set of preference keys (#9907), which the custom navigator's newer
settings are not part of. They travel in the profile's own `view_navigator` entry, next to its
body (`view_gizmo`): captured, checked (a value this version can't read is left out) and applied,
leaving the fixed key set unchanged. The cube's arrow inversion (#10286) applies to the custom
navigator's arrows too, through the shared arrows().

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: follow main's Vec3 move and fallible world_state

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: list view.navigator in the rig's EXEMPT, refuse a stored body that can't save again, right-click without a widget over the navigator

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: keep the body unless picked again, save only a profile that reads back, no navigator menu through a popup

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: refuse a stored body with a triangle past its points

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: a stored body meets the triangle and aspect limits a picked one does

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: a body at the 5:1 limit stays inside it once packed

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 17:12:27 +00:00
Igor Bronovskyi 30842efb22 Ukrainian: translate the 174 messages main gained after the 3 November sync, panel layout and the redesigned preferences included (#11064)
* i18n(uk): translate the 80 messages main gained after batch 11

* i18n(uk): translate the messages main gained after 2 November

Add Ukrainian for the 158 English messages upstream added since the last
sync, and update 10 existing translations whose English text changed.

The new messages go in assets/locales/pending/uk-sync-2-nov.json, as the
locale files are not edited for new messages. The changed English text is
updated in assets/locales/uk.json, because a pending file cannot change an
existing message.

* i18n(uk): translate the messages main gained after the 3 November sync

Add Ukrainian for the 174 English messages upstream added since the last
sync, and update 56 existing translations whose English text changed.

The new messages go in assets/locales/pending/uk-sync-2-nov.json, as the
locale files are not edited for new messages. The changed English text is
updated in assets/locales/uk.json, because a pending file cannot change an
existing message.

* i18n(uk): apply CodeRabbit review fixes

Use the catalog's established wording: 'вибрати' in the keyboard hint,
name the linked component in the double-click help, and use the command
labels 'Упор', 'Бобишка' and 'Клацкове з'єднання' in the placement group.

* i18n(uk): use "Защіпкове з'єднання" for Snap Fit

The catalog called the plastic snap-fit joint "Клацкове з'єднання", a
calque of "snap". Use the standard "Защіпкове з'єднання" and
"защіпковий гачок" in the command label, help, sample description and
the design tools placement group. The drag hint already said "защіпку".

* i18n(uk): replace calques and outdated terms

Use "збіг" for coincident, "виступ" for lip, "ступиця" for hub, "шаблон" for preset, and "наддискретизація" for supersampling. Render and panel host texts now say "рендерер" or "середовище"/"вікно" instead of "хост".
2026-11-04 17:05:44 +00:00
Colin Faulkingham 549aef17a5 Changing anti-aliasing no longer resets the saved window system (#10116) (#10147)
* claim: #10116

* fix: preserve the saved window-system preference at startup

* fix: preserve graphics preferences in safe mode
2026-11-04 16:57:30 +00:00
DanielandClaude Opus 5.5 4d738cd210 Sketch: an ellipse is drawn with its axes, and D measures its half-axes (#9291) (#9292)
* Sketch: an ellipse comes with its axes, and D measures its half-axes

An ellipse could only be sized by its minor radius, drawn like a circle's
radius, and there was no way to give its full axes. sketch.ellipse now also
adds the major and minor axes as construction lines through the centre.
The major axis runs from the major end to the point opposite it; the minor
one is perpendicular to it, ends on the ellipse, and both are bisected by
the centre. That adds six coordinates and six equations, so the ellipse
keeps its five degrees of freedom, and it needs no new constraint kind and
no format change.

With the axes in place every ellipse size is an ordinary dimension. D on an
axis line gives its length, the whole axis. D on the outline gives a half-
axis, the distance from the centre to an axis end, chosen the way a line
chooses horizontal or vertical but in the ellipse's own frame: text pulled
across the major axis measures along it (the major half-axis), text pulled
out past an end of it measures across it (the minor one). The end on the
text's side is used. Near the boundary between the two, a dimension being
placed keeps the half-axis it had (sketch.dimension's previous_axis, which
the Dimension tool sends), so the preview does not flip. A half-axis and
its whole axis determine each other, so the second becomes a driven
dimension through the existing redundancy path.

Deleting the ellipse leaves its axes, as deleting a Center Rectangle's
edges leaves its construction diagonals. Ellipses without axes, from
existing designs, keep the minor radius as before, and type radius still
gives it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Guide: an ellipse's axes and half-axis dimensions

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: test that an ellipse's half-axis preview keeps its axis near the boundary

The Dimension tool sends the half-axis its last preview chose, so near the
boundary between the major and the minor half-axis the preview keeps it.
This covers that path from the tool, from both sides of the boundary.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: an ellipse's axes select and drag with it, as a rectangle's diagonals do

A double-click on a Center Rectangle's edge or diagonal selects its edges
and both diagonals, and dragging a diagonal moves the rectangle without
changing it, because its lines share corner points. An ellipse's axes are
held by constraints instead, so a double-click selected only the ellipse
(and Delete then left the axes behind), and dragging the major axis moved
the ellipse but stretched its minor half-axis.

Sketch::ellipse_axes now finds an ellipse's construction axes (the
detection sketch.dimension already used, moved into the sketch crate).
Sketch::chain treats an ellipse and its two axes as joined, so a
double-click on any of them selects all three. Dragging either axis moves
the ellipse and both axes as one, keeping both half-axes. Dragging the
outline still sets the minor half-axis.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a corner test reads its line's id instead of assuming l1

sketch.ellipse now adds two axis lines, which take the first line ids, so
the extend test reads the id of the line it draws from the reply.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: an ellipse's axes cut a trim, as a Center Rectangle's diagonals do

Trim, extend and break take every other curve as a cutter, construction
lines included, so an ellipse's construction axes stop them as a Center
Rectangle's diagonals do. A test now states it for both shapes, and the
guide says it. The freeform cutter test keeps the axes it used to delete
and asserts the piece a trim removes: from where the major axis crosses
the circle to where the ellipse does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: test dragging an ellipse's outline with its axes present

Dragging the outline sets the minor half-axis, and the minor axis line,
held on the ellipse at one end, follows it; the centre and the major
half-axis stay.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: other dimension types on an ellipse with axes keep the minor radius

Only auto, major and minor give a half-axis on an ellipse drawn with its
axes. Any other type (radius, diameter, horizontal and the rest) gives
what it gives on an ellipse without axes, as the parameter doc says,
instead of quietly becoming a half-axis chosen by the text. The arm for
a missing text_at is dropped: with no text the rule already picks the
minor half-axis.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: test an ellipse's half-axis dead zone from the major side too

The tests only showed a previous minor half-axis being kept near the
boundary; the point they used on the major side is major by geometry
alone. A point inside the band where geometry says minor now shows a
previous major half-axis kept, in the engine and in the Dimension
tool's preview.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a placed ellipse half-axis is the one its preview showed

On an ellipse already sized, a half-axis is added as a driven dimension
on the click, and that command left out the half-axis the preview kept
near the boundary, so the click could place the other one. It now
passes it as the preview does.

The remembered half-axis also comes only from a draft whose text was
placed (one without text is the minor half-axis by default and biased
the first placement), is kept per sketch as well as per picks, and is
forgotten once a dimension is placed or the picks are cleared.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: say how an ellipse's axes are recognised and what that costs

The axes are read from the constraints, with no mark in the design, so
the doc comment says which lines count, that deleting the midpoint or
point-on-curve constraint leaves an ellipse without axes, and that each
lookup scans curves times constraints.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: an ellipse with one axis deleted still picks its half-axis by the text

With one construction axis deleted, D on the ellipse fell back to the minor radius wherever the
text was pulled, because the half-axis choice needed both axes. It now reads what is left of
them and chooses as before: the major half-axis goes to the major end (also from the far side,
when the point opposite is gone with its line), the minor one to its axis end, or as the minor
radius when the minor axis is the one deleted. An ellipse with neither axis keeps the minor
radius.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: the one-axis half-axis test checks what is measured to

The test for an ellipse with one axis deleted checked only the reply's axis and value, which
both ends of an axis give alike. It now checks the dimension's kind and end: the axis end on
the text's side, the major end from either side once the point opposite is gone, a radius once
the minor axis is. With the major axis deleted and no text the reply names the minor axis and
measures to its end, where it used to be a radius with no axis named.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: an ellipse's minor radius is drawn as its half-axis, without R

A radius on an ellipse is the minor half-axis, and it was drawn as a circle's radius: one
leader from the centre towards the text, marked R, which measures nothing a reader can see.
It is now drawn as the distance from the centre to the minor axis end on the text's side,
the way the half-axis is drawn while the ellipse has its axes, and labelled with the length
alone. This is what D gives once the minor axis line is deleted, and on an ellipse with no
axes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: an ellipse's half-axis keeps a radius's stored text

The half-axis frame read the stored text from the middle of the half-axis, so a radius placed
on an ellipse in an existing design would show its text somewhere else. The text is stored from
the centre again, as a radius's always was, and the side drawn to follows it. An unplaced one
sits where a linear dimension to the minor axis end puts its text, and stacked texts step out
from the centre as a radius's do. A view test reads the painted label, so the drawing cannot
go back to R unnoticed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: an ellipse moved, turned or scaled takes its axes along

Move, Sketch Transform and Scale moved only the curves picked, so an ellipse moved without its
axes left them where they were: its centre no longer halved them, the minor end left the
ellipse, and the sketch stayed unsolved. A Center Rectangle's diagonals share its corners and
always go along; an ellipse's axes share only the major end. The axes now go with the ellipse,
as they do when it is dragged. Copy is unchanged: it copies no constraints, for a rectangle
either.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a preference draws ellipses without their axes, as before

Drawing an ellipse with its construction axes changes what the Ellipse tool makes out of the
box, so the old ellipse stays one setting away: Preferences › Sketch › Draw ellipses with their
axes, on by default. Off, the tool draws the ellipse alone. sketch.ellipse takes axes: false
for the same, and keeps drawing the axes when it is not given.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: sketch.ellipse refuses an axes value that is not true or false

A string such as "false" was read as not given, so the axes were drawn; it is now refused as
the text commands refuse a non-boolean bold or italic. The move test also covers an ellipse
whose minor axis was deleted: the major axis left goes along.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: D picks a half-axis on an ellipse without axes too

An ellipse with no axis lines (both deleted, a mirrored copy, one from an older design) gave the
minor radius wherever the text was pulled, so its major half-axis could not be dimensioned on
it. The half-axis is now chosen by where the text is on every ellipse: the major one to the
ellipse's own major end, the minor one as its minor radius. With no text it is the minor
radius, as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: with one half-axis dimensioned, D on the ellipse gives the other

D on an ellipse chose the half-axis by where the text was pulled even when that half-axis was
already held by a dimension, so the second D usually guessed the one already there and was
refused as over-constrained. With a driving dimension already on one half-axis (to an axis
end, the minor radius, or the whole axis along its line or between its ends), D with no type
now gives the other, in either order and with or without the axis lines. With both held it
chooses as before; an explicit major or minor is kept.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: the held half-axis rule is documented and its cases tested

The Dimension command's parameters and the guide now say that with one half-axis held, D on
the ellipse gives the other. Tests cover the whole axis held as a distance between its ends
and as its line's length with the other axis deleted, and check that a mirrored ellipse has
no axes. The placement test undoes its first dimension, so its second half still tests where
the text is rather than the held half-axis.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: Transform previews an ellipse with its axes

OK in Sketch Transform moves, turns and scales an ellipse's axes with it, but the window drew
where OK would leave only the picked curves, so the axes stayed put in the preview until OK. An
ellipse picked alone is now drawn with the axis lines it has.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: the typed-radius ellipse test counts the ellipse's axes

Main's #10282 test drew an ellipse with typed radii and expected one curve; with the
ellipse_axes preference on by default the tool also draws the two axes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: an ellipse's remaining axis still drags and selects it

With one axis deleted, dragging the other axis did not hold the ellipse (with the minor axis
left, the drag squashed it), and a double-click on the ellipse or that axis selected only the
one curve. The drag and Sketch::chain now read whichever axes are left through
ellipse_axis_lines, as Transform and Move already do.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: drop the unreachable third arm of the held half-axis check

A distance from the centre to the major end or the point opposite it is already matched by the first arm, so the third arm and its major_end closure never ran.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: D on an ellipse's axis line is the whole axis wherever the value is pulled

An axis line took the free line's rule, so on a turned ellipse a value pulled beside or above the box the axis spans gave its horizontal or vertical distance. An ellipse's axis is a construction axis, so auto now always gives its length, which the held half-axis check already counts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: an ellipse's axis is never a side of a Fillet or Chamfer corner

A line drawn from an ellipse's major end shares that point with the major axis, so Fillet or Chamfer there took the two as a corner (two lines skip the construction filter) and rounded the line into the axis. The axes are left out of a corner, picked by its point or as a and b.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: test the move reply, extend and the one-axis Transform preview for ellipse axes

The reply of sketch.move, sketch.transform and sketch.scale lists the axis lines, Extend stops at an axis, and Sketch Transform previews an ellipse with the one axis left after the other was deleted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: with Draw ellipses with their axes off, D on an ellipse is its minor radius as before

The preference brought back the old drawing only; D on an ellipse had changed with no way back. sketch.dimension takes half_axes (default true, refused when not true or false); false makes auto on an ellipse the minor radius wherever the text is. The Dimension tool and the context menu's Sketch Dimension pass it from the preference, and with it off a radius on an ellipse is drawn and labelled R as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: read an ellipse's axes in one pass over the constraints

ellipse_axis_lines scanned every constraint for every curve, so 500 ellipses with their axes (1500 curves, 2000 constraints) took 1.6 s to read and Move on all of them 2.0 s. It now collects the lines the centre bisects first: 3 ms and 0.36 s.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: the dimension and corner parameters say how an ellipse's axis lines take part

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preferences: Draw ellipses with their axes says D gives the minor radius when off

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: ask only the ellipses centred on a line's midpoint whether it is their axis

is_ellipse_axis read every ellipse's axes to answer for one line. An axis is bisected by its ellipse's centre, so it now asks only the ellipses centred on a point that bisects the line. The answer is the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a horizontal or vertical dimension across a level major axis holds it for D on the ellipse

half_axes_held counted a distance, a length and a radius, but not a horizontal or vertical dimension across the major axis, which is its length when the axis lies that way. D on the outline could then take the held major half-axis and be refused as determined; it now gives the minor one. Across a slanted axis such a dimension is only a projection and does not count.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Dimension: a draft on an ellipse is drawn with the axes preference it was made with

The frame read the preference as it is now, while the dimension added is the draft's.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a horizontal or vertical dimension across an upright minor axis holds it too

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: drop the unused Sketch::ellipse_axes; ellipse_axis_lines says how the axes are read

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: an ellipse's own axes do not cut it, so Trim takes a lone ellipse whole and stops at real crossings

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: Fillet and Chamfer offer no corner at an ellipse's axis end, as the engine takes none

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a deleted ellipse leaves its centre on its axes, as a Center Rectangle's centre stays

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: ellipse axis docs say what they do, and the corner picker tests a curve's ends before its axis role

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: the trim-at-a-crossing test checks that part of the ellipse is left

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: an ellipse axis moved, turned or scaled on its own takes its ellipse along, as a drag does

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a selection dragged by an ellipse axis takes the ellipse along, as the axis alone does

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Docs: the Sketch preferences page lists Draw ellipses with their axes

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: the ellipse axes help text says D gives the minor radius, drawn and labelled R as before, wherever the value is pulled

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 16:54:46 +00:00
github-actions[bot] 1cfe77bb85 Regenerate generated files and fold pending files [skip ci] 2026-11-04 17:13:13 +00:00
Nathan Dane e3f99de8af Onyx: a tactile stone-grey theme with broad subtle blur (#10338)
* Onyx: add the finished stone-grey theme and document its blur range

* Onyx: distinguish grey construction lines from gold dimensions
2026-11-04 16:35:28 +00:00
40b1b70dec Shell: pick a body from the Browser for a closed hollow (#794) (#11441)
* claim: #794

Co-authored-by: ReDead <ReDead@users.noreply.github.com>

* Shell: pick a body from the Browser for a closed hollow (#794)

Faces/Body accepted only faces, so a Browser body click never filled the
Shell dialog. Accept bodies, build faces:[] with that body, restore empty-face
shells as a body pick, and keep the chip/highlights on the body itself.

Co-authored-by: ReDead <ReDead@users.noreply.github.com>

* Shell: refuse faces that sit on a different body than the Browser-picked one

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: ReDead <ReDead@users.noreply.github.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 16:01:35 +00:00
github-actions[bot] 0862f1679a Regenerate generated files and fold pending files [skip ci] 2026-11-04 16:25:53 +00:00
2cd54b6af9 Agents and scripts: the standard part commands describe their exact parameters and reply (#11003) (#11004)
* claim: #11003

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Standard parts: input and output schemas (#11003)

parts.library, parts.insert, parts.fastener and parts.resize get typed
contracts and reply types in schema/parts.rs and leave unconverted.txt.
Each key reads as the handler reads it, with its message; the replies
are built from PartsLibrary, InsertedPart and ResizedPart, with the same
JSON as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Standard parts schema: Vec3 comes from solidcore_record

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Standard parts schema: hole picks must start with a list

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* parts.insert schema: the first hole pick must be a point, not any list

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-04 15:30:52 +00:00
c9c063620a Hole: Bridged option for counterbores (#11103) (#11104)
* claim: #11103

* Hole: Bridge option for counterbores (#11103)

A counterbore hole takes an optional `bridge` length: two 3D-printing
layers that thick below the counterbore's floor, a slot along X across
the counterbore and then a square, both 0.02 mm wider than the hole, so
a printer bridges the step instead of sagging into it. Empty (the
default) keeps a plain counterbore.

The clearance keeps the bore, cut straight through both layers as for a
plain counterbore, clear of their sides: at exactly the hole's width it
ran tangent along them and broke through. The command and the geometry
refuse a layer that is not a positive length, layers that don't fit in
the hole below the counterbore, and a bridge on any other hole type.

The Hole dialog shows a Bridge field below Drill Point for counterbores.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Hole: translate the Bridge label for the complete catalogs (#11103)

Arabic, Hebrew, Japanese, Vietnamese and Chinese carry every English
message, so `cargo xtask i18n --check` needs the new label in each.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Hole: bridged counterbores refuse layers past a through hole's exit, too narrow a counterbore and a malformed bridge (#11103)

- Through all, the second bridge layer must end inside a body (exact point classification),
  short of the exit face; the tool's reach is no measure of the material.
- A bridged counterbore must be at least 0.04 mm wider than the hole, so the slot's ends have
  room on its wall (no square root of a negative number reaches the extrude).
- `solid.hole` refuses a `bridge` that is given but not a length expression (`true`, `[]`, `""`)
  instead of making a plain counterbore; `null` still leaves it out.
- Loop2 and Seg2 now come from solidcore_record (main moved them).
- The "nothing saved" check looks for the `"bridge"` key: `format_pending` names
  `bridged-counterbore` in every design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Unit defaults test: solid.hole has the bridge field too

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-04 15:24:15 +00:00
Nathan Dane 9060abc83e Sliders: keep the parent material clear beneath the track (#10375) 2026-11-04 15:17:54 +00:00
austin62jakeandClaude Opus 5.5 bec762fb2b Agents and scripts: the render library browsing commands describe their exact parameters and reply (#11443) (#11444)
* claim: #11443

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render library: input and output schemas for List, Describe, Targets and Preview (#11443)

Describe, Targets and Preview read their strict parameter types from
schema/render_library.rs, which become their contracts. List keeps its two
readers (the physical profiles' takes availability: null, the other
catalogs' doesn't); its contract takes what either takes. The handlers build
LibraryPage, LibraryResource, LibraryTargets and LibraryPreview instead of
json! literals; a catalog resource is read into ResourceSummary through a
small Listed reader. The physical profiles' replies keep their JSON, which the
schemas describe.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render library schema: the list says which availability each catalog takes

render.library.list has two readers: the physical profiles' takes
availability all, usable or null; the other catalogs' (and a call
without kind, which lists surfaces) take all, usable, specification or
blocked, but not null. The schema now says so with an anyOf on kind.
The type still takes what either reader takes: the readers check the
query and the page before availability, so refusing it in the type
would change which message a call with two mistakes gets in strict.
A new test checks that the schema takes ten calls exactly when the
handler does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-04 14:50:44 +00:00
leValdemar19andClaude Opus 5.5 826fce68eb Assembly: Move Occurrence says when the part's joints put it back (#11723) (#11791)
* claim: #11723

* Assembly: Move Occurrence says when the part's joints put it back (#11723)

A part that rigid joints hold to something grounded was moved, then put
back by the joint solve after the command, while occurrence.move still
replied with the moved transform. occurrence.move now solves the joints
before it replies. When they put the part back, the reply gives where the
part is, adds reverted: true and a warning that names the joint holding it
and what to change instead. A free chain of parts follows the move as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move Occurrence: the warning names the joint for a part in a repeated assembly too (#11723)

A part inside an assembly placed more than once has no path of its own, so
the reverted-move warning asked for one instead of naming the joint. It now
looks at the placement the caller named, or else the first one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move Occurrence: list the part's joints when no single joint holds it back (#11723)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 14:39:17 +00:00
SS-ENandClaude Opus 5.5 73f50d7bb4 Viewport: hidden parts no longer draw their joint-origin triads (#11294)
* Viewport: hidden occurrences draw no joint-origin triads

A named joint origin's triad (red/green/blue axes, white dot) was drawn for every
origin, so hidden inserted hardware still showed one at its placement. It now
follows the occurrence's visibility (and its parents') and the Joints folder of
the design and of the placement.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport: a copy's joint-origin triad follows that copy's visibility

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 14:24:55 +00:00
github-actions[bot] d1927aac25 Regenerate generated files and fold pending files [skip ci] 2026-11-04 13:33:45 +00:00
Brett LawsonandClaude Opus 5.5 b224ad6dae Kernel rig: the Lip refusal case matches the reworded message (#10871) (#11937)
#10871 reworded Lip's refusal on a face that is not a shelled rim to
"Lip needs the rim of a shelled body: ...", but the plastic rig case
cov-lip-on-a-face-without-an-opening-refused still looked for "pick the
rim face of a shelled body". The case now matches the new message, so the
kernel rig's plastic shard passes again on main.


Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 12:49:40 +00:00
bherbruckandClaude Opus 5.5 ca10e02573 Russian: correct the plural of degrees of freedom and make two notes match English (#11856)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 12:42:56 +00:00
bherbruckandClaude Opus 5.5 5500681d6a Brand kit: logo files and a short brand guide in assets/branding (#9117)
Adds assets/branding/logo with the static mark (colour, one-colour
black and white), transparent 512/1024/2048 px PNGs, an outlined
wordmark and a horizontal lockup, all drawn from the app icon's
blue cutout layer. assets/branding/README.md covers use, colours,
clear space, minimum size and the name.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 12:36:16 +00:00
bherbruckandClaude Opus 5.5 fabeaa329a Desktop app: closing a design stops its kernel work, and designs build the same on any kernel (#11771)
* Desktop: closing a design stops its kernel work; same result on any kernel

A design's jobs now run under a stop token that closing or replacing the
design fires: an operation under it refuses to start, and one running ends
at solidcore's next check. The kernel it ran on is not used again. Calls
that answer from a body itself always finish, since a stopped call can leave
what it borrows half-changed, and what fills a body's shared cells is not
stopped.

Every kernel call starts clean (the same random rays, no stations from
earlier calls), so a design builds the same on any kernel of the pool, down
to its B-rep records. The pool is bounded: at most 8 kernels wait between
calls, and at 256 running calls a new call fails rather than grow or wait.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Stop tokens: a copy never stops its design; a stopped job can't decide a refusal

A copy replacing its own design stopped the token it shares with the design
it came from, so that design's later work would be refused. Only the design
itself stops it now. Which face a refusal names no longer depends on whether
the job that found it had been stopped: the refusal is kept with the body,
and a stopped job's probes were all refused, which named the wrong face.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 12:35:39 +00:00
PeppaWutz 8f67c7fb95 Sketch: constraint icons stay while the sketch fills the view (#10518) (#11399)
* Sketch: constraint icons stay while the sketch fills the view (#10518)

Constraint glyphs hid as soon as a millimetre of the sketch plane drew smaller than two pixels
(#8980), whatever the sketch's size, so a 500 mm sketch zoomed to fit lost every glyph although
it still filled the view. Below that scale the glyphs now hide only while their anchors span
less than twenty glyphs (300 px) on screen: a small sketch far away still loses them, a large
one that fills the view keeps them. The preference "Hide constraint glyphs when zoomed out" is
unchanged; off, glyphs stay at every zoom as before.

Test: constraint_glyphs_hide_when_zoomed_out adds a 500 mm sketch that keeps its glyphs zoomed
to fit and loses them far away; glyph_zoom_tests covers the span threshold.

* Sketch: glyph span measures only drawn glyphs and stops at the threshold (#10518)

The span check now walks the same constraints the glyph pass draws (one MidPoint glyph per shared midpoint, a pattern's constraints once) and returns as soon as the bounds reach MIN_GLYPH_SPAN_PX, so a large sketch zoomed out costs no more than before.

* Sketch: filter glyph constraints lazily, midpoints in a set (#10518)

* Sketch: measure the sketch, not its glyph anchors, before hiding glyphs (#10518)

* Sketch: collapse the midpoint check into one if (#10518)
2026-11-04 12:06:26 +00:00
github-actions[bot] 6bca7d2854 Regenerate generated files and fold pending files [skip ci] 2026-11-04 08:13:26 +00:00
eeb686f164 Measure: a circle and a line now show 'Line to centre' instead of 'Center to center' (#11524)
* Measure: a circle and a line show 'Line to centre' instead of 'Centre to centre'

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>

* Measure: US spelling for Line to center, UK in en-GB

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 07:38:21 +00:00
9e3e403b3f Browser and History: keep row tools working when either panel is hidden (#11303) (#11416)
* claim: #11303

* Keep Browser and History row interactions independent

* Browser tests: use solidcore_record::Vec3 after the layer split

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 07:15:40 +00:00
dudedagger42andClaude Opus 5.5 0231eec4c6 Nix flake: zenity on the app's PATH, for file dialogs without a portal (#2177) (#5183)
rfd opens file dialogs through the XDG desktop portal and falls back to zenity
when there is none. The flake's package didn't bring zenity, so on a system
without a portal or zenity, Open and Save showed nothing. The wrapper now adds
nixpkgs' zenity at the end of PATH, after the system's own.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 06:53:37 +00:00
erman 69f202f1c8 Measure: show complete point coordinates (#11069) (#11085)
* Measure: show complete point coordinates (#11069)

Render measurement item details as wrapping text instead of fixed-height cells. Keep the existing values, units and precision. Add a regression test in the existing measurement UI test module.

Local validation: the regression test compiled, but the Windows GNU test binary crashes with 0xc0000005 even for --list, before tests run. Runtime verification and visual evidence remain pending; this contribution is a draft.

* Keep repository LF line endings in the coordinate fix
2026-11-04 06:53:04 +00:00
1cbfb889d5 Agents and scripts: Compare Bodies describes its exact parameters and reply (#10994) (#10995)
* claim: #10994

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Compare Bodies: input and output schemas (#10994)

inspect.compare gets a typed contract and reply types in
schema/compare.rs and leaves unconverted.txt. Each key reads as the
handler reads it, with its message; `color` checks each colour with the
handler's own color_param, now pub(crate) and re-exported from cmd. The
reply is built from Comparison and its parts, with the same JSON.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Compare: drop the json import the typed reply no longer uses

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Compare schema: colour strings carry the hex pattern

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-04 06:45:10 +00:00
ee3cc32525 Settings profiles: export and import stay inside an agent's folders (#11362) (#11390)
* claim: #11362

* Settings profiles: export and import go through vfs, inside an agent's folders (#11362)

settings.profile.export and settings.profile.import read and wrote their
path with std::fs, so the folder scope an MCP request's allow_paths sets
up never saw it: an agent could write a profile anywhere, or probe any
path. Both now go through vfs (len, read_to_string, write), as file.export
and ui.screenshot do. requests_with_allow_paths_stay_inside_them covers
export and import inside and outside the agent's folders.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 06:28:11 +00:00
Colin Faulkingham 954232cef1 AI client setup: preserve configuration files when a write fails (#11363) (#11410)
* claim: #11363

* AI client setup: replace configuration files atomically (#11363)
2026-11-04 06:27:37 +00:00
github-actions[bot] 9092df9b97 Regenerate generated files and fold pending files [skip ci] 2026-11-04 07:25:51 +00:00
semmelrindeandClaude Opus 5.5 c1a23f8f97 Section Analysis: the drag arrow is back when the dialog is reopened (#11423) (#11432)
Edit reopens the dialog from the section's own geometry (Show viewport
section status, on by default): the plane is kept as numbers and nothing
is picked. The arrow was placed from the first pick only, so it was gone.
With nothing picked, it now stands on the kept plane, its tip at the cut.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 06:11:46 +00:00
austin62jakeandClaude Opus 5.5 0fc4cd2747 Agents and scripts: the render stage commands (Ground, Backdrop, Clear) describe their exact parameters and reply (#11455) (#11456)
* claim: #11455

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render stage: input and output schemas for Ground, Backdrop and Clear (#11455)

The three handlers' strict parameter types move to schema/render_stage.rs as
GroundParams, BackdropParams and ClearParams, with descriptions and
JsonSchema, and become the contracts; the handlers read the same types. The
handlers build the shared StageSaved reply instead of json! literals, and the
saved setup is serialized with an error instead of json!'s panic path.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-11-04 06:11:09 +00:00
leValdemar19andClaude Opus 5.5 6d83f95fba Isolate a body: other components are hidden as components, in one step (#7896) (#7951)
* claim: #7896

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Isolate a body: other components are hidden as components, in one step (#7896)

Isolating a body hid every other body one by one: browser.visibility with `items` writes only
hidden_bodies, so every other component's Browser row kept an open eye and normal text, and
its eye could not bring it back (the first click hid an already invisible component).

browser.visibility takes `isolate: true` with `items` (bodies), as it does with `paths`. The
picked bodies' own placements stay open, their other bodies (and the root's) are hidden one by
one, and every other placement is hidden as a placement. Isolate in the Browser and the view
runs that one command, so it is also one undo step instead of two.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Isolate a body: a hidden Bodies folder or group it is in shows again (#7896)

Isolating a body inside a hidden Bodies folder or group left that folder or
group hidden, so the picked body stayed hidden. Isolate now shows the
folders and groups (with the groups they are in) that hold the picked
bodies; their other bodies are hidden one by one as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Isolate a body: look for hidden folders only when some are hidden, and find body owners once (#7896)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 06:06:23 +00:00
bf625dff05 Box, Sphere and Torus: clicking a point of a sketch places them there (#9403) (#9405)
* Box, Sphere and Torus: a sketch point picks where they go (#9403)

The Point input of the Box, Sphere and Torus windows took a vertex, a point on an edge or face
and the origin, but not a sketch's points, so a sphere could not be centred on a point drawn in a
sketch. It now takes the points of every shown sketch (POINTS | EXTERNAL_POINTS, as Measure
does): a click fills X, Y and Z with where the sketch puts the point in the world, and a point
selected before the window opens places the primitive there, as a vertex does. The input's chip
names the point and its sketch as Select Other does ("Point 2 · Marks").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Box, Sphere and Torus: the sketch point chip label for every complete locale

Main's i18n check wants each message in the complete catalogs (ar, he, ja,
vi, zh); the label has no words, so each carries the same "{point} · {sketch}".
With main's new selection kinds and this one, every Sel variant has its arm,
so the catch-all arm is unreachable (clippy) and goes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Primitive at a sketch point: a point picked in the sketch being finished still places it

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-04 06:03:39 +00:00
semmelrindeandClaude Opus 5.5 ed3510a91f Typed schemas for the design properties commands (part of #2829) (#10920)
document.metadata, document.metadata.set and document.metadata.remove
get input and output schemas: contracts in schema/metadata.rs, checked
in front of the unchanged handlers, and reply types the handlers now
build their replies from. Their lines leave unconverted.txt.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 06:03:21 +00:00
github-actions[bot] 8f0130a61b Regenerate generated files and fold pending files [skip ci] 2026-11-04 06:39:31 +00:00
github-actions[bot] 72df682af7 Regenerate generated files and fold pending files [skip ci] 2026-11-04 06:27:43 +00:00
Davit MatchakhelidzeandClaude Opus 5.5 41a450be7c i18n: add Georgian (ka) interface language (#11501)
A Georgian catalog (assets/locales/ka.json) carrying every English message,
registered in crates/ui-egui/src/i18n.rs, with a row in the new-language test,
a pending attribution file and a terminology note in docs/localization.md.
The catalog is Mkhedruli only; egui's built-in Hack already draws it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 06:00:45 +00:00
HiroKenEzandClaude Opus 5.5 b227924be9 Render: the Cancel button keeps its full label during a render (#11222) (#11241)
* claim: #11222

* Render: the progress row keeps Cancel whole (#11222)

The progress card is an egui area, laid out within last frame's size. When
the status grew (9 % to 10 %, a longer phase or name), the caption and the
Cancel button were truncated, down to "..." with a long shot name.

progress_action now takes the name and the status apart and gives each part
an explicit width from the room the caller offers (the canvas for the
floating card): Cancel and the status always show whole, a long name is cut
with an ellipsis (full name on hover), then the meter narrows.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 06:00:31 +00:00
Mateusz SychandMateuszSychXpl 28b47059bb Agent chat: a text selection dragged past the edge scrolls the conversation (#11527) (#11533)
* claim: #11527

* Agent chat: a text selection dragged past the edge scrolls the conversation (#11527)

Holding a text selection near or past the top or bottom of the conversation
scrolls it, faster the further out, so a long answer can be selected in one
drag. egui scrolls a label's selection only for the label under the cursor, and
not at all for a table, whose label sits in its own horizontal scroll area.

egui also leaves a label out of the text selection while it is scrolled out of
view: a selection whose start had scrolled away was dropped, and Copy missed
the hidden text. The conversation's labels now take part out of view too,
clipped to nothing, so they keep their end of the selection and give their
text to Copy without being drawn or moving the selection.

* Agent chat: only a drag towards the edge scrolls the conversation (#11527)

A press on a label creates an empty selection on the press frame, so a click,
a double click or a held press on the line by the edge scrolled the
conversation, and so did the start of a drag from there inwards. Scrolling now
waits until the pointer has moved more than 8 points towards that edge since
the press.

* Agent chat: approval titles and pending messages keep a selection scrolled away

They were plain selectable labels, so a selection that started in one was dropped
once its label scrolled out of view, as in the rest of #11527. They now use the
same off-screen-aware label as the conversation's text.

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-11-04 06:00:28 +00:00
Mateusz SychandMateuszSychXpl a19a32ddd7 Interference: Compute checks in the background, so the window no longer freezes (#11483) (#11541)
* claim: #11483

* Interference: intersect and mesh each overlap on a kernel worker (#11483)

Compute in Inspect > Interference intersected each overlapping pair and
meshed the shared volume on the window thread. Its stack is 1 MiB on
Windows, too small for the kernel's recursion, so the app could close
without a crash message. Each pair now runs through
kernel::map_with_local_pools, on a worker with the kernel's 8 MiB stack,
as inspect.interference and inspect.clearance already do.

* Interference: Compute checks off the window thread (#11483)

On 0.30.0 the report's two parts took the window thread 95 s (x64) to
154 s (x86) in the overlap boolean, and the window stopped responding
until the app was closed. Compute now runs inspect.clearance and the
shared volumes on a copy of the session, on a kernel thread, when the
app runs commands off the window thread (as Find Limits does). The
dialog shows the elapsed seconds with Cancel meanwhile, and drops the
reply of a design changed since.

* Interference: Cancel on its own row while Compute checks (#11483)

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-11-04 06:00:15 +00:00
Homero Thompson 606e264f6d UI: the Dependents button of the INSPECT HISTORY ribbon no longer fails without a feature (#11642) 2026-11-04 05:59:52 +00:00
semmelrindeandClaude Opus 5.5 d25f8198fa Pieces of a cut keep their names when the design is evaluated again (#11658)
A cut that leaves a body in pieces names them after their faces
(`order_lumps`): the piece whose least face name sorts first takes the
first name, and so on. It moved the names but left the pieces where the
kernel put them. The session then pinned the feature's body names in
that state order, and the next full evaluation (opening the design, or
editing a parameter upstream) handed them out again in a different
order: two pieces swapped names, and a later feature that named one met
the other. Found by a local model fuzzer.

The pieces now also take the family's places in name order, so the
names pinned are the order the next evaluation hands them out in. A
design saved before keeps the names a fresh evaluation gave it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 05:59:42 +00:00
Hainlein4711 464f4ac748 Intel OpenGL: restore the grid and sketch axes (#8053) (#11573)
* claim: #8053

* Intel OpenGL: restore the grid and sketch axes
2026-11-04 05:49:15 +00:00
semmelrindeandClaude Opus 5.5 03b5248dc1 Sketch: Line and Construction Line refuse a second point next to the first (#11595)
A through-point 0.0000001 mm from the start made an infinite line whose
direction nothing held, and a Line that short had both ends connected to
the origin, a line of length zero. Both now refuse points closer than the
distance at which a new point is connected to an existing one.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 05:49:05 +00:00
Colin Faulkingham f9dd77e383 Configurations: reject invalid suppression values when saving rows (#9088) (#11571)
* claim: #9088

* Configurations: reject invalid suppression values before saving rows (#9088)
2026-11-04 05:39:04 +00:00
semmelrindeandClaude Opus 5.5 4afd24d29f Design tabs: the tooltip says when a saved design has unsaved changes (#11408) (#11590)
* Design tabs: the tooltip says when a saved design has unsaved changes (#11408)

A tab marks unsaved changes with a bullet after the design's name, and a
long name cut short by the tab hides it. The tab's tooltip, which says
where the design is saved, now adds "Unsaved changes" below for a saved
design with changes not saved yet. A design never saved already says
"Not saved yet". The new string is in a pending locale file, with ten
translations taken from the same words elsewhere in the catalogs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Design tabs: the unsaved line in every complete catalog (#11408)

Arabic, Hebrew and Vietnamese are complete catalogs, which must carry
every English message: they get the words they already use for
"Unsaved changes" elsewhere.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 05:29:03 +00:00