froglemonade2andClaude Opus 5.5 3e70ad9876 View navigator: right-click to choose Axes, Cube or a Custom body (#10266)
* View navigator: a custom body as the navigator, and a right-click menu to switch types

A right-click anywhere on the view navigator opens a menu with its three types: Axes, Cube and
Custom. Custom opens the Custom View Navigator panel (a feature panel with OK and Cancel): pick a
body in the view, its texture (Themed: the cube's colours; Modeled: the body's own appearance and
the view's edge colour), and whether the cube's rotation arrows and Home button go around it. The
navigator previews the panel's choices while it is open; Cancel leaves it as it was.

The custom navigator draws the body at the cube's size through a small depth-buffered raster, so
hidden faces stay hidden; hovering a face highlights it, a click looks straight at it (and frames
the model with navigator_fit on), a drag orbits. Until a body is chosen it draws the cube.

The body is kept as a packed snapshot (16-bit, base64) with the preferences and in settings
profiles, so it stays across runs and designs and travels with an exported profile. Bodies over
10,000 triangles, and long or flat ones (thinnest width under a fifth of the widest), are refused.

New command view.navigator (style, body, texture, arrows, home) does the same without opening
anything; new preferences navigator_texture, navigator_arrows and navigator_home, and a Custom
choice for navigator_style. Defaults are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: a hovered face in Modeled takes the view's selection colours

In the Modeled texture the face under the pointer is filled and outlined the way the view selects
a face of the model (sel_face, sel_edge), not in the cube's hover blue and accent, which Themed
keeps.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: a hovered face in Modeled lights up as the view's mouse-over does

The face under the pointer keeps its own colour, a little lighter (hover_face_lift) and still
shaded, with its edges in the view's mouse-over edge colour (hover_edge), as the 3D view shows a
face under the pointer; not the selection colours. Themed keeps the cube's hover blue and accent.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: rotation arrows and Home on by default

navigator_arrows and navigator_home start on, so a new custom navigator has the cube's arrows and
Home button around it; the Custom View Navigator panel turns either off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: the strings in every complete language, and test fixes

- The new messages in Arabic, Hebrew and Vietnamese (complete catalogs, like Japanese and Chinese).
- The navigator's raster goes through one colour helper, listed with its reason among the files
  allowed colour literals (the design's appearance shaded into pixels).
- nav_settings joins the requested-icon manifest (the view.navigator command's icon).
- A visible edge piece is kept only when the stretch seen with it, across the edge's segments, is
  at least two samples long: a hidden edge no longer shows a sliver at a silhouette corner.
- The navigator layout test treats Custom without a body as the cube it draws; the panel and
  size tests no longer assume an empty undo list, the style before opening, or a coarse sphere.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: profiles carry its texture, arrows and Home

Settings profiles keep a fixed set of preference keys (#9907), which the custom navigator's newer
settings are not part of. They travel in the profile's own `view_navigator` entry, next to its
body (`view_gizmo`): captured, checked (a value this version can't read is left out) and applied,
leaving the fixed key set unchanged. The cube's arrow inversion (#10286) applies to the custom
navigator's arrows too, through the shared arrows().

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: follow main's Vec3 move and fallible world_state

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: list view.navigator in the rig's EXEMPT, refuse a stored body that can't save again, right-click without a widget over the navigator

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: keep the body unless picked again, save only a profile that reads back, no navigator menu through a popup

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: refuse a stored body with a triangle past its points

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: a stored body meets the triangle and aspect limits a picked one does

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Custom view navigator: a body at the 5:1 limit stays inside it once packed

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 17:12:27 +00:00
2026-11-03 15:35:34 -05:00
2026-11-03 15:35:34 -05:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The macOS app is signed with a Developer ID and notarized by Apple. The Windows downloads aren't signed yet: choose More info, then Run anyway in SmartScreen. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .sc designs (.solidcraft files from earlier releases still open).
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default "C:\\Program Files\\SolidCraft\\solidcraft-cli.exe"). Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Disclaimer

The files in this repository are provided as is, without warranty, liability or indemnity, and Tangency Labs and the contributors accept no responsibility for any harmful or unlawful use of them: read DISCLAIMER.md.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
https://solidcraft.io Readme
501 MiB
0 Stars 1 Watchers 0 Forks
Languages
Rust 97%
Python 2%
WGSL 0.5%
JavaScript 0.3%
Shell 0.1%