A new command, sketch.spline.reverse, runs a spline the other way: its
point list is reversed in place, so its last point becomes its first and
the curve keeps its path (chord-length fits, uniform clamped knots and
closed fits read the same both ways). Points and constraints stay. A
projected spline and one an offset uses or makes are refused. The
sketch's right-click menu offers it for one selected spline.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8284
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch on a face: a round's edges that end a hair apart still close (#8284)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch on a face: test both ends of a rounded loft end to end (#8284)
A square lofted to a circle with its side edges rounded, as in the
report: a sketch on either end face takes the whole face. Without the
fix the circular end fails with "face projection has a branched
boundary". Also drops a redundant term from the join tolerance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #8301
* Timeline: the feature menu's suppress item follows the reader's language (#8301)
Suppress Features / Unsuppress Features were raw literals. Menu::label()
translates a label only when a catalog entry carries it, and none did, so the
item stayed English in every language, the Japanese UI included.
The two labels are now the messages timeline.suppress_features and
timeline.unsuppress_features in a new assets/locales/pending file: the English
wording is unchanged, and the complete catalogs (ar, he, ja, vi, zh) plus de and
ko carry the translations.
cargo test --profile ci -p solidcraft-ui-egui --lib -- timeline::tests::the_feature_menu_suppress_item_follows_the_language
fails on the claim commit (the Japanese menu paints the English literal) and
passes with the change.
The Appearances panel's 27 messages for Dutch, Hungarian, Galician,
Malay and Norwegian Bokmål, which their merged Render batches missed,
and the shots strip's 7 newer messages for those and ten more.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Fix issue with settings window automatically scrolling to selected item, preventing scrolling by user
* Fix issue with settings window automatically scrolling to selected item, preventing scrolling by user
In the Sketch > Create drop-down a plain row such as Point was drawn
200 pt wide, the minimum width its labels fit in, while a family row such
as Slot filled the menu. The menu was as wide as the one-line pin hint in
its footer, so the plain rows' hover background and pin stopped short of
the right edge.
The Create menu now sets its width from its rows before drawing them, as
the other panel drop-downs do, and passes that width to the plain rows
instead of recomputing it over a subset. Family rows fill the same width
and the footer hint wraps inside it. The overflow menu's plain rows take
the width of all its commands in the same way. A family's submenu still
sizes its variants to their own labels.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Most browser menus show V beside Show/Hide, but the V key always ran
toggle_visibility, which acts on the selection. A right-click on a body or
sketch row also selects it, so the two agreed there; a right-click on the
Bodies, Sketches or Origin folder, a group, the component or an origin plane
does not, so V did nothing, or flipped a body selected earlier, and left the
menu open.
With a menu open, V now runs that menu's row whose shortcut is V, through
run_item as a click does, and closes the menu (context_menu::press_shortcut).
A disabled row takes the key and does nothing. With no menu open, or a menu
without such a row, V still acts on the selection (#4128, #4409: V stays
selection-based).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8329
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* Save As offers the open file's own name (#8329)
Save As, Save As JSON and Save a Copy proposed the design's name, the one
stored inside the file. Copies of a file under other names keep the
stored name, so "Sample Plate-bug.solidcraft" was offered
"Sample Plate.sc", the same as its sibling, and one replaced the other.
Session::save_as_name() offers the stem of the open file unless the
design was renamed since it was opened or last saved, and the design's
name otherwise (a new design, or one renamed in the Browser).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
Each cap is tangent to both concentric sides, so its radius is already
half the gap between them and the two caps are equal. The Equal the arc
slot added between them was always redundant; it is no longer added.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A button is 60 points tall and its label starts 32 points down, so two
lines of the label font (31 points) ran 3 points past it. Two-line
labels now take the font size plus 2 points per line and start higher
when they would still run past the button, leaving 2 points below.
One-line labels are unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8020
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Insert Part: the Length list opens on the default length (#8020)
The list carried an item called "Default" above the standard lengths. It
never said which length it stood for, and one of the lengths below it
always was that length, so the list offered the same length twice under
two names. Change Part Size has always listed concrete lengths.
The item is gone and the list opens on the length the part would be given
anyway. The default cannot be worked out in the dialog, because it is not
one rule: a cap screw or bolt takes the first standard length at or above
2.5 d, a set screw the first at or above d, a dowel pin the first at or
above 4 d. parts.library now reports default_length beside each size's
table values, taken from the shape the engine would build, and the dialog
selects it; the test checks that report against what an insert without a
length is actually built to, for every size of every family.
Leaving the length alone behaves as "Default" did: a new size resolves
the list again, so M6 to M12 moves the selection from 20 to 30. A length
chosen by hand stays until the size changes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Insert Part: the labels test skips default_length too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #5638
* Sphere, Torus and Cone dialogs: place them by their centre or base (#5638)
The Box and Cylinder dialogs already had typed X, Y and Z placement
fields; the Sphere, Torus and Cone dialogs now do too. Sphere and Torus
show Placement: Center and take a picked point like the Box; Cone shows
Placement: Base Center like the Cylinder. The fields take expressions,
and Edit Feature shows and keeps the stored centre or base.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With the dialog buttons at the bottom, the spinner shown while the preview
computes or OK applies was painted on its own after the footer: at the
card's left edge and one control height up from its bottom. The footer
insets its row by 12 pt at the sides and 10 pt above and below and centres
the buttons, so the spinner sat outside that inset and about 10 pt below
the buttons' centre line.
Panel::feature now draws the spinner through the footer's left slot, so it
shares the row's inset and vertical centre, in the space the footer already
leaves for it before the status text. The rect is published as
dialog:footer:spinner, and a panel test checks it lies in the footer row,
at its left inset and on the OK button's centre line. The spinner in the
title row (buttons at the top) is unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Italian: translate the 132 messages main gained since batch 1 (batch 3)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Italian: the Appearances panel's 27 Render messages
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Dutch: translate the 199 messages main gained since batch 1 (batch 3)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dutch: Spoed for a thread's pitch, as the catalog's Pitch (review)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Render inspector: selection-following appearance panel with the look chain, Applies to and edit controls
* Render appearance: Glass, Clear coat, Maps, Saved optics and Reflections sections
* Update Render navigation tests for dedicated editors
* Exercise Focus keyboard protection through the Library search field
* French: translate the 205 messages the catalog was missing
The French catalog lacked 205 of the English messages, so parts of
Preferences, the hole presets, the slicer messages, the Render
workspace and the Assistant showed in English. They are translated in
one pending file, with the catalog's terms (Esquisse, Fonction,
Bossage, Appui, Clip, Prise de vue) and its non-breaking space before
: ; ? and !.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Translate the 90 messages main added since (the navigation bar's)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A variable font (one file for every weight, as most web fonts ship) has no face marked bold,
so Bold failed with "has no bold face". Without a bold face, a face whose wght axis reaches past
semibold is now set to weight 700. ttf-parser gets its variable-fonts feature for that.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8155
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* DXF import: an elliptical arc comes in as exact conic arcs (#8155)
A partial ELLIPSE (how Fusion, and SolidCraft's own DXF export, write an
elliptical arc) was read as a degree-3 spline fitted through 16 samples,
which strays from the ellipse between them: 0.84 mm on a 300-degree arc
of a 200 x 40 mm ellipse. It is now read as exact rational-quadratic
conic pieces of at most a quarter turn each, which the sketch keeps as
conics. A conic arc written by SolidCraft's DXF export now reads back as
the same conic.
The arc's sweep is taken with rem_euclid instead of a loop that added a
turn at a time, which ran for billions of turns on a start angle of 1e11.
sketch.drawing_bounds and the width/height sizing of sketch.insert_dxf
measure a conic by points along it, not by its apex, which can lie
outside the curve.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #8265
* Move/Copy: a triad drag ends where the button was released (#8265)
A frame carries all the input queued since the last one, so the release
that ends a drag and further pointer movement — the hand keeps moving as
the button goes up, or input is queued during a busy frame — arrive
together, and the frame's latest pointer position is already past the
release. The drag's final change was read from it, so the value, the
preview and the command both jumped to wherever the mouse had got to;
pressing Enter right after the release closed the window first, which is
why that worked around it. Rotate and occurrence moves share the triad.
The final change now comes from the release event's own position, which
the raw input carries (egui's processed pointer events drop it). The
regression test sends a release at 20 mm and a move to 30 mm in one frame:
30 mm before, 20 mm after.
Fixes#8265.
* claim: #4086
* Raise the largest file SolidCraft opens with a setting or launch flag (#4086)
* Translate the file size limit strings
* Size limits: design files are .sc now, .solidcraft still read
* Romanian: translate the Render workspace's 733 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Romanian: the Render tree's switch hint is a verb
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6651
* test(#6651): a list parameter of the wrong type is refused
A list parameter such as a cut's `targets` or an export's `bodies` loses entries without an error: a value of the wrong type reads as an empty list, which most commands take to mean "every body". The regression test drives the engine the way a user does: two bodies, a box cut that crosses both and is meant for one of them, and a `targets` of the wrong type. The command must refuse it and leave the design as it was.
* fix(#6651): a list parameter refuses a wrong type instead of losing entries
A list parameter of the wrong type was read as an empty list, and an empty
list means "every body" to most commands: a cut meant for one body cut every
body it touched and the command reported success.
A wrong type is now an error that names the parameter, the offending entry
index and the value it got. A list longer than 10000 entries is an error
instead of being cut short. `null` stays absent, as the schema contract says,
and a plain string is still a list of one. The 80 call sites now propagate the
error instead of losing entries; the commands that take feature keys, which
may be named or numbered, read them with their own reader.