* claim: #9184
* Control channel: a request's own param_check level, applied and confirmed by the app (#9184)
`engine.execute`, `engine.batch` and `engine.script` take an optional
`param_check: "off"|"warn"|"strict"` in their params. The app runs the
request at that level through the same `run_checked` path and batch
preflight a headless session uses, puts its own level back, and every
reply says the level it ran at as `param_check` beside `ok`. A command
that switches designs keeps the app's level; any other word is refused.
Readings and exports answered on a copy off the window thread keep the
level too.
`control.capabilities`, answered at once on the control-server thread,
lists what the channel does beyond the methods every version has:
`{"param_check": ["off", "warn", "strict"]}`. An older app answers
"unknown method".
The MCP bridge asks it once per connection. When the app lists the
level, every call and batch goes with it and the app checks against its
own commands; otherwise the bridge checks before sending, as #9073 does.
At strict, a reply that doesn't say the app checked the call is an error,
and the next calls are checked by the bridge. Also: `add_param_warnings`
takes the reply by `&mut`, and `with_param_check` sits beside
`Remote::new`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Control channel: a design-switching command is checked at the request's level
Review fixes for #9184. `component.edit_in_place`, `component.finish_edit`,
`view.next_tab` and `view.previous_tab` ran at the app's own level and
echoed `off`, so a misspelt call went through at strict. They now have
their parameters checked at the request's level before they run (and
still run at the app's own level, as each design keeps its own), and the
reply echoes the requested level. The MCP bridge at strict now requires
the echo to match its level, not just to be there. `param_check` is read
only by `engine.execute`, `engine.batch` and `engine.script`; other
methods ignore it. The off-thread test now shows the design change
computing off the window thread before it is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch corners: a round that would use up a whole arc is refused
A quarter arc of radius 5 running into a line along it, rounded with
radius 5, put the round's tangent point at the arc's other end and left
an arc of no length. round_corner now skips a round whose tangent point
falls on either curve's other end; with none left it says that radius
does not fit, as for two lines (found by a local trim fuzzer).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch corners: a round where the curves meet smoothly is refused
A line running on from an arc's end along its tangent (off only by rounding)
has no corner, but the round's tangent points landed within 1e-7 mm of it and
the round came out as an arc of no length (found by a local trim fuzzer). The
corner test's line met its arc this way too and was checking that output; it
now meets the arc at a corner.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9179
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* sketch.inspect: each profile loop names a curve once, not once per segment (#9179)
A profile records one curve id per piece its loop walks, and a conic or
spline is walked as many short pieces, so sketch.inspect listed a single
Bezier curve 50 times in a profile's `curves` and as often in a hole loop.
The reply now names each curve of a loop once, in the order the loop walks
them (solidcraft_sketch::distinct_curves, as delete and profile references
already do). The solved profiles keep their per-piece lists.
The lists are now a profile pick as they stand: a whole_boundaries pick
refuses a curve named twice, and the regression test extrudes the wall
from the reply's lists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
An SVG import leaves a sketch with regions and no body. The marquee (box select) took only the bodies, so the imported geometry was unreachable with the selection tools: a marquee over it selected nothing, and a click on a region did not take it either.
The marquee now takes the regions of the shown sketches when the design has no body. A design that already has a body keeps the old exclusive behaviour: the marquee takes the bodies alone, not the regions of the sketches that are shown. A dialog that asks for edges or faces (the Patch dialog) never takes the regions: they are neither.
* claim: #2829 (construct.* contracts)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Typed contracts for the construction axes, points and planes
The 19 construct.* commands get input contracts and FeatureResult as
their output, with shared types for references, planes, a plane or
face base, an axis line and a construction plane's name, each calling
the reader its handler uses (split out of geo, plane_param, the face
capture and named_axis_line).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9188
* Preference: keep the view when a sketch opens, Look At faces it on request (#9188)
Preferences > Sketch > "Turn to face a sketch when it opens" (on by default,
so nothing changes unless it is turned off). Off: creating or editing a
sketch leaves the view as it is, a sketch started on a face no longer
re-centres on the picked point, and Look At (the palette button, Ctrl+8)
still turns to face the sketch. The control channel sets it as
`ui.prefs {"sketch_open_look_at": false}`.
Changes a default: no
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9087
* fix(#9087): ui.home refuses a sample index that names no sample
The control channel passed the sample index straight to open_sample, which drops an index that names no sample and says nothing. The request then replied ok, so an agent could not tell a typo from a sample that had opened.
The index is checked before it reaches open_sample: an index that names no sample is refused with the valid range in the error. A sample that exists still opens, as before.
* claim: #9086 (edge lengths)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: an exact circle's or arc's length agrees with its circumference (#9086)
Measure gave a circle's or an arc's length_mm as the length of the
polyline drawn for it, which runs inside the curve, while the same reply
gave its circumference or arc_length from the exact circle. When the edge
is known exactly (the kernel's circle, or a sketch's own circle or arc),
length_mm is now its radius times its angle. A circle fitted to a mesh
body's polyline keeps the polyline's length.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9029
Co-authored-by: Cursor <cursoragent@cursor.com>
* Square sketch axes when looking at a turned plane (#9029)
Look At only yaw-aligned sketches facing world up/down, so a sketch on a rotated component stayed tilted on screen. Roll (or yaw at the poles) so the sketch's x runs right and y is upright.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #9108
Co-authored-by: Cursor <cursoragent@cursor.com>
* Canvas calibrate: pick Point A and B with viewport clicks (#9108).
The Calibrate card only had typed coordinates, so users could not mark the image. Clicks on the canvas now fill A then B, with on-image markers and a short hint.
Co-authored-by: Cursor <cursoragent@cursor.com>
* Calibrate canvas: ja/zh/ar/he/vi strings for the click hints
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Persistent naming: a proposal from a second implementation
A design proposal for the persistent-naming failures still open (#4341,
#5198, #5308, #5857, #5858, #5860, #5861), from building persistent naming
in Form Studio: fall back by lineage, never by geometry alone; a suppressed
maker is not a lost reference; names saved as structured one-level values;
ordinals from the feature, not the kernel's face order; split picks resolve
to all pieces; body identity apart from the display name. Documentation
only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Persistent naming proposal: body identity follows the #5308 plan
Change 6 now agrees with bluecmd's plan on #5308: an id minted from
next_id and stored per feature slot, better than the derived identity
the first version proposed. It adds that a stored id is only as stable
as the slot assignment, which today follows each lump's least face
name, and gives the lineage signature from the #5308 discussion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4515
Co-authored-by: Cursor <cursoragent@cursor.com>
* Inspect: keep analysis legends clear of a left History (#4515).
Draft, Accessibility and Curvature legends were painted at the viewport's left edge under a left History sidebar. Place them in the free workspace content instead.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
offscreen_device() asked wgpu for its default adapter and ignored the
SOLIDCRAFT_GPU policy that headless pictures follow, so with
SOLIDCRAFT_GPU=software the ui-egui offscreen tests still opened the
hardware GPU. Under hardware or software the adapter now comes from
solidcraft_gpu::select (new pick_among, which pick uses too); under cpu
there is none; unset (auto) keeps wgpu's default adapter as before.
Part of #9040.
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9147
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the Sketch Grid box in the Sketch panel turns the sketch's grid off (#9147)
The box sets the open sketch's hide_grid, but the viewport drew the grid
whenever a sketch was open, so hide_grid only reached the ground grid and
the box did nothing. An open sketch now shows its grid whatever the Grid
switch says, unless its own Sketch Grid option is off; the window guides
that renders and the control channel use follow the same rule.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #7521
* fix: headless pictures return their draw counts with the picture
`the_renderer_counts_what_it_draws` drew with `Capturer::rgba` and then
read `Capturer::last_stats()`. The capturer is shared with the binary's
other tests, which draw on it from parallel threads, so another picture
could land between the two calls and the test read its counts (e.g. 10224
triangles for the empty design).
`Capturer::rgba_with_stats` returns the picture and its counts, read while
the call still holds the device. `last_stats()` is removed; this test was
its only caller (the performance overlay reads the viewport renderer's own
stats handle).
New test `pictures_drawn_at_once_each_count_their_own` draws empty and box
designs from eight threads on the shared capturer. Against the old pair it
failed 25 of 40 full runs of the `capture` binary; it passes with the new
call.
* fix: a headless picture waits for its read-back's answer
A picture maps its read-back buffer, waits for its submission with
`device.poll(PollType::Wait)`, and then checked once with `try_recv`
whether the map callback had run. wgpu calls a finished mapping's
callback from whichever thread next maintains the device, in a poll or
in any `queue.submit`, after it lets go of the device. When another
thread got there first, the wait returned with the mapping done but its
callback not yet called, and the picture failed with "not supported yet:
reading a picture back without waiting for the browser", the error meant
for a browser.
On the shared capturer, the other thread is another picture's device
check (`probe_lost` submits nothing before it takes the capturer's lock),
so the `capture` tests failed now and then: `bad_picture_sizes_are_errors`
(its last 8 x 8 picture), `pictures_show_a_plain_cut_without_the_hatch`,
`pictures_blend_a_line_that_is_not_opaque`. In the app, the window's
frames are submitted on the device its thumbnails and `ui.render`
pictures are drawn on.
A native picture now waits for the answer, up to the picture timeout; a
browser still answers later, on its own.
New test `pictures_read_back_while_another_thread_uses_the_device`: 2,000
small pictures while another thread polls their device. Without the fix
it failed 19 of 20 runs (1 to 7 pictures each); with it, 150 of 150 runs
pass. `bad_picture_sizes_are_errors` now prints the error it gets.
* Release 0.27.1
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render job test: wait for the cancelled job's reservation to be released
The worker drops a job's reservation just after the job turns terminal, so
checking admitted bytes right after wait_timeout raced (10 of 40 local runs
failed). Poll with a deadline, as dielectric_tests does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>