Commit Graph
2866 Commits
Author SHA1 Message Date
FrankandClaude Opus 5.5 a402c5e502 Snap points: the centre, middle and ends an edge or face offers, in the engine (#5881) (#5882)
* claim: #5881

* Snap points: the centre, middle and ends an edge or face offers (#5881)

Phase 1 of #5881. `solidcraft_engine::snap::snap_points` gives the points
a picked item offers as picks, from Measure's exact shapes: a round edge
its centre (an arc also its ends and exact middle, joined across pieces
the kernel split it into), a straight or other edge its ends and middle,
a flat face the centre of its area, a cylinder or cone the centres of its
ends, a sphere or torus its centre, a vertex itself. Nothing uses them yet.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:48:29 +00:00
JIJINBEIandClaude Opus 5.5 cdde7d62b2 Persistent names read by one parser; four misreadings fixed (#5814) (#5966)
* doc: persistent names read as their structure; joint.inspect splits an edge with a blend face first

`persistent_name::{FaceName, EdgeName}` parse a face or edge name once (blends, inner walls,
copies, pieces, numbered pieces, `~k`) and write it back as the same text, bounded against
hostile input. A suffix after a blend's edge naming a later feature belongs to the blend face.

joint.inspect split an edge at its first `|`, so an edge whose first face is a blend
(`F4:blend:F3:+x|F3:+z#[…]|F5:-y`) came back as a cut-off blend name and a string that is no
face. It now uses `EdgeName::parse`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: persistent names as typed values: features, roles, suffixes, a lexer and errors that say where

`FaceName` is a base (made by a feature in a role, a blend and the edge it rounds, an inner
wall, a body's face by index, other text) and its suffixes (copy, piece, numbered piece).
Roles are typed where the vocabulary is known (top, side:<curve>, +x, face:<k>, …) and kept as
written otherwise. The text form is lexed into tokens and read by the grammar in the module's
doc; a name that doesn't read says where and what was expected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* names: read what made a face, its kind and its feature ids through persistent_name

The places that took a name apart by hand to find the feature that made a face, whether it is
a blend, a copy, a numbered piece or a wall, or to remap feature ids on copy, now ask the typed
name (`made_by`, `split_feature`, `is_blend`, `is_copy`, `is_numbered_piece`, `is_wall`,
`features`, `map`). A name that doesn't read falls back to the old text check.

- An offset of a face that only names a blend inside it (`F2:top#[F5:blend:…]`) is no longer
  taken for a fillet's.
- Copying a component remaps feature ids inside a piece's `#[…]` too.
- A shell's inner wall split by a later cut keeps the qualifier on the wall.
- joint.inspect finds the sketch curve of a copied side (`side:l1@F7.2`).

Finding a face by name (strip_piece, parent_piece) is unchanged: it reads a trailing
qualifier as the whole name's and moves once the text form says where it belongs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* engine: regression tests for press-pull on a wall that only names a fillet and joint.inspect on a copied side

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* names: an edge holds one face or more; made_by reads only the leading token

An open boundary's edge has one face and an edge several faces meet at has more, so an edge name
is a list of faces (a blend's own edge still takes two at most, as before). `made_by` reads just
the leading `F<n>:`, which every name a feature made starts with, so asking it of every face
each frame stays cheap. Names are read up to 1 MiB: a face engraved with text has piece names
past 4 KiB.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* persistent_name: split into lexer, parser, write, text and tests

No code changed; callers' paths stay the same (`pub use text::*`).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:48:26 +00:00
DuBearteandClaude Opus 5.5 3f6b9fe89f Timeline: reorder anyway (allow_errors) and report the features the move breaks (#5962) (#5988)
* claim: #5962

* Timeline: reorder anyway (allow_errors) and report the features the move breaks (#5962)

timeline.reorder and timeline.reorder_many refuse a move after which a
feature that worked would fail. Sometimes breaking a later feature is the
point: an agent restructuring a design wants the move made, then the list
of what broke so it can repair those features next.

Both take allow_errors (default false: refused as before). With it the
move is made and the reply lists broken: [{feature, error}] (empty when
nothing broke); one undo puts the order back. timeline.reorder_many also
takes active, as timeline.reorder does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:48:23 +00:00
b4acd83c78 A count from a length says how to get a count (#5901) (#6011)
A pattern count such as (L-2*Post)/210 is a length when the 210 is unit-less, and was refused with only "expected a unit-less number, got a length". The message now says to divide by a length, e.g. floor(L / (210 mm)).

Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 01:48:21 +00:00
semmelrindeandClaude Opus 5.5 f7233c4418 Render: a preview setup with exposure renders and names what it leaves out (#5089) (#6073)
render.settings.set stores exposure_ev and the environment controls, but
render.preflight and render.start refused any setup with them because the
CPU image executor doesn't apply them, so such a setup could never render.
The CPU executor now renders it and the replies list the left-out
controls in ignored_controls.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:48:20 +00:00
Colin Faulkingham 5573ae06fc Prevent body renames from reusing removed body names (#6042) (#6048)
* claim: #6042

* fix: reject body names retained by Remove (#6042)
2026-10-25 01:48:15 +00:00
raykholo 89a4a96630 Ribbon: an active contextual tab looks selected (#4230) (#4242)
* claim: #4230

* Ribbon: an active contextual tab looks selected (#4230)

Contextual tabs (Sketch while editing, Sheet Metal for a sheet body) chose
their solid accent fill before checking whether they were active, so
selected and unselected looked the same.

The selected contextual tab keeps the solid accent pill. An unselected one
now looks like any unselected tab with its accent as an outline, so it still
marks the context without outshining the tab that is selected. Ordinary tabs
are unchanged.
2026-10-25 01:26:47 +00:00
raykholo 34d1ac0376 A straight 3D sketch line can be picked as an axis (#4363) (#4381)
* claim: #4363

* A straight 3D sketch line can be picked as an axis (#4363)

3D sketch wires were always offered as curved, and axis inputs resolved
only 2D sketch lines, so a straight 3D line couldn't be an axis (Plane at
Angle and others). A single-segment wire is now offered as straight and
resolves to its endpoints in model space; splines are still refused.
2026-10-25 01:26:44 +00:00
Thodoris Tsagkogeorgas 0e9e175e79 Two-sided sketch offset shows both distances in the sketch (#4385) (#4386)
A two-sided offset drew only the Distance dimension. Distance 2 now gets
its own value box and arrow, the other way from Distance.
2026-10-25 01:26:41 +00:00
rlartotandClaude Sonnet 5.5 f11ad0ce28 Ribbon tooltips: written help for six more tools (#2758) (#4592)
Combine, Loft, Mirror, Circular pattern, Rectangular pattern and Sweep get the
same two-sentence help as the first six (en, fr, ja, zh). Text only.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 01:26:33 +00:00
neosandeep24 9ad96fb81b Home: keep a removed recent design removed (#4660) (#4718)
Removing a design from the Start page's recent list only changed memory, and on the web sync_recents() rebuilt the list from stored designs on each launch, adding it back. Track removed designs in a persisted 'forgotten' set that sync_recents honours; opening or saving a design, or deleting/renaming its file, clears it.
2026-10-25 01:26:31 +00:00
HerperlerpicusandClaude Opus 5.5 b671265faa Viewport: show the running tool's icon beside the pointer (#4869) (#4870)
* Viewport: show the running tool's icon beside the pointer

While an interactive tool or a command's dialog runs, its toolbar icon
rides above and right of the pointer in the viewport, so the next click's
command is visible without looking up at the ribbon. It sits clear of the
system arrow and of the sketch tools' coordinate readout below the
pointer, moves left at the right edge and below the readout at the top.

It shows only where a click reaches the model: not over panels, dialogs,
menus or the navigation bar, and not while the camera moves. The icon is
the command's own (the one the ribbon and the dialog header show), so
there is no new artwork. On by default; "Show tool at cursor" in View
settings (`ui.set {"toolCursor": false}`) turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport: the tool at the cursor is off by default

As asked in review: the badge starts off, and "Show tool at cursor" in
View settings (or `ui.set {"toolCursor": true}`) turns it on. The test
checks the default and turns it on through the View settings checkbox.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:26:27 +00:00
Reefwalker 832ff941d1 Edit Text: explain failed bold previews immediately (#5004) (#5155)
* claim: #5004

* fix: explain failed sketch text previews immediately (#5004)
2026-10-25 01:26:23 +00:00
raykholo 9869997733 Sketch Create menu: line, rectangle, and other families show their icons (#5244) (#5279)
* claim: #5244

* Sketch Create menu: family rows show their icons

The Line, Rectangle, Circle, Arc, Slot, Polygon, and Spline entries in a
sketch's Create drop-down were drawn as plain text buttons. Draw each as
the shared menu row with its first variant's icon and a submenu arrow,
keeping the same popup handling for its variants.
2026-10-25 01:26:20 +00:00
raykholo 745a24bbc8 Sketch: undo while drawing a spline removes the last point, not the sketch (#5304) (#5441)
* claim: #5304

* Sketch: undo and Backspace remove the last pending spline point (#5304)

While a spline tool has points placed, Cmd/Ctrl+Z and Backspace take back
the last point instead of undoing sketch history or deleting the selection.
Undo reaches sketch history again once no spline points remain.
2026-10-25 01:26:15 +00:00
raykholo 26340882c0 Mirror keeps the preselected feature when the object type changes (#5288) (#5453)
* claim: #5288

* Mirror keeps the preselected feature when the object type changes (#5288)

The pre-selection moves into the objects input when a pattern window
opens, and switching Object Type cleared that input, so switching to
Bodies and back lost the selected feature. The window now keeps the
objects of the type not shown and restores them when it is chosen
again. A plain timeline click on a feature already picked keeps it;
Ctrl+click takes it out.
2026-10-25 01:26:13 +00:00
raykholo 8e2b8f2ace Floating history: the last done feature is no longer drawn as selected (#5415) (#5455)
* claim: #5415

* Floating history: the last done feature is no longer drawn as selected (#5415)

The floating history strip passed the last feature before the marker to
HistoryChip as selected, so it looked selected with nothing selected.
Pass only the real selection, and mark the last done feature with a small
tab-accent dot under its chip instead.
2026-10-25 01:26:10 +00:00
ISHII YUKI 34e75979b2 Agent chat: hand WSL paths to agents started through wsl.exe (#5546) (#5549)
* claim: #5546

* Agent chat: hand WSL paths to agents started through wsl.exe (#5546)

An ACP agent started through wsl.exe was handed the session's working
folder and the solidcraft-app bridge's command as Windows paths, which it
can't use: the Claude adapter refuses the session, and the bridge never
starts. When the agent's program is wsl or wsl.exe, convert both to their
WSL form (C:\Users\... -> /mnt/c/Users/...) before session/new, in the
chat and in the Test button. The bridge still runs on Windows and reaches
the app at 127.0.0.1.
2026-10-25 01:26:05 +00:00
N3MI-DGandClaude Opus 5 d5eca6cc78 3D mouse: let the overall speed slider reach the 5x the engine allows (#5704)
The Preferences > Navigation overall speed slider stopped at 3.00x, but
`space_mouse::frame` clamps the applied speed to 0.1..=5.0, so the top of
the range the engine honours could not be reached from the UI. Raise the
slider's ceiling to 5.0x to match that clamp; the step, format and lower
bound are unchanged.

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
2026-10-25 01:25:58 +00:00
rlartotandClaude Sonnet 5.5 77c77829e3 Preferences: Z up orientation figure is drawn right-handed (#5680) (#5741)
* claim: #5680

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Preferences: draw the Z up orientation figure right-handed (#5680)

Z up showed Y pointing toward the viewer on the left, a mirrored
(left-handed) figure. Y now points away on the right, like the axis
gizmo. The axis tips move into orientation_axes and a test checks that
X to Y and Y to Z turn counter-clockwise in both figures.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 01:25:55 +00:00
Colin Faulkingham f01ef3c6aa Keep the Parameters window height stable when moved (#5078) (#5752)
* claim: #5078

* Keep the Parameters window height stable when moved (#5078)
2026-10-25 01:25:53 +00:00
rlartotandClaude Sonnet 5.5 f5a6c8fa51 Link the version number to its release notes (#5488) (#5765)
* claim: #5488

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Link the version number in the title bar to its release notes (#5488)

The version at the right of the title bar opens the release page of this
build (v<version>, which exists for stable, candidate and nightly
releases) in the browser; a development build opens the release history.
Its click area stops at the report button, which the long version
strings of candidates and nightlies overlap.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 01:25:51 +00:00
rlartotandClaude Sonnet 5.5 865575e410 Hem: the handle runs along the hem to its tip (#5828) (#5844)
* claim: #5828

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Hem: the handle runs along the hem to its tip (#5828)

The hem's on-canvas handle started on the picked edge and pointed square
to the sheet (#4794 only flipped it), so it neither sat on the hem nor
moved the way the Length grows. Length is measured from the outer face
of the fold to the tip, so the handle now starts on the centre line of
the hem layer at that face and points along the hem toward the tip.

The test builds the hem for both Flip states and checks the handle's
direction, its start on the layer's centre line, and that start plus
Length lands on the built tip. It replaces the arrow-side test of #4836,
whose rule (the arrow points to the side the hem builds on) no longer
applies.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 01:25:49 +00:00
HiroKenEzandClaude Opus 5.5 992c93fe5b Find in Timeline scrolls both timeline layouts to the found feature (#5850) (#5863)
* claim: #5850

* Find in Timeline scrolls both timeline layouts to the found feature (#5850)

Find in Timeline selected the feature but neither the bottom History strip
nor the history on the left scrolled to it. The handler now leaves a one-shot
reveal request (TreeState::timeline_reveal); whichever layout draws its items
next scrolls the found item into the middle of its scroll area and drops it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:44 +00:00
raykholo 0343960bd6 Ignore middle-click clipboard paste during navigation (#5855) (#5924)
* claim: #5855

* Ignore middle-click clipboard paste during navigation (#5855)

Firefox on Linux sends a primary-selection paste event when the middle
button orbits or pans. Paste events on frames where the middle button is
pressed, held, or released no longer reach the design; Ctrl/Cmd+V still
pastes.
2026-10-25 01:25:40 +00:00
DuBearteandClaude Opus 5.5 1d48707d0c Drive Joints: a Show ghost checkbox (#5905) (#5955)
* claim: #5905

* Drive Joints: a Show ghost checkbox (#5905)

Driving a joint draws the moved parts' old place as a translucent ghost,
which gets in the way when driving joints over and over. Drive Joints has
a Show ghost box under its value rows: on by default (nothing changes),
off draws only the moved parts at their new place. The stopped-short
warning stays. The choice is a preference (drive_joints_ghost), so it is
remembered between uses; it affects Drive Joints only.

The preview's Colors carry the choice (ghost), so toggling it recomputes
the preview (its key hashes the colours) and world_preview leaves the
ghost out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:38 +00:00
DuBearteandClaude Opus 5.5 443baa41f0 Design tabs: the tooltip says where the file is saved (#5868) (#5974)
* claim: #5868

* Design tabs: the tooltip says where the file is saved (#5868)

Hovering a design tab showed the design's name, the same text as the tab.
The tooltip now says where the file is saved, with a path in the home
folder shortened to ~/ (home::friendly_path, as the start page does), or
"Not saved yet" for a design never saved. When the tab is too narrow for
its name, the full name comes first, then the place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:36 +00:00
Colin Faulkingham d366b8922a Keep the main sketch tool unchanged when a pinned tool starts (#4023) (#6013)
* claim: #4023

* fix(ui): preserve sketch family choices when starting pinned tools
2026-10-25 01:25:33 +00:00
Colin Faulkingham 692265980b Identify commands beside the animated agent cursor (#622) (#6026)
* claim: #622

* fix(ui): identify commands during agent cursor animation
2026-10-25 01:25:31 +00:00
Colin Faulkingham 28fe5fdb43 Extrude: accept manually selected target planes (#4974) (#6030)
* claim: #4974

* fix(ui): accept manual extrude plane targets (#4974)
2026-10-25 01:25:29 +00:00
semmelrindeandClaude Opus 5.5 26c9d1c445 View toolbar: the Look At tooltip names its shortcut, Ctrl+8 (#2476) (#6071)
Look At already has a key (Ctrl+8, Cmd+8 on a Mac), but the button's
tooltip didn't say so, as Fit's does (F6).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:24 +00:00
semmelrindeandClaude Opus 5.5 f157f5489f test: the desktop-PATH agent probe waits long enough on a loaded machine (#6072)
desktop_path_can_start_an_agent_and_its_runtime gave the version probe
3 s and the first reply 5 s. Under a full test run on a loaded macOS
machine the probe came back empty (version None, twice in a row), while
the test alone passes in 0.4 s. Both limits are now 20 s; a working
agent still answers at once, so the test takes no longer.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:22 +00:00
semmelrindeandClaude Opus 5.5 d1ec8dfd5a Agent chat: a Mammouth AI preset for OpenAI-compatible endpoints (#5815) (#6082)
* Agent chat: a Mammouth AI preset for OpenAI-compatible endpoints (#5815)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: the key test names the Mammouth AI URL too (#5815)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:19 +00:00
semmelrindeandClaude Opus 5.5 08d094db39 Shell: an empty Thickness makes no command, so OK waits for one (#960) (#6085)
With the Thickness box cleared, the dialog sent thickness: "" and the
command refused it ("`thickness` must be a number or an expression"),
shown as a red error with Create Issue. The dialog now makes no command
until a thickness is entered.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:17 +00:00
github-actions[bot] 5fa6361ff2 Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] 2026-10-25 02:19:39 +00:00
Colin Faulkingham 1f93b6d39c Joint: use the picked straight edge as the motion axis (#5457) (#6086)
* claim: #5457

* fix: align new straight-edge joint snaps with the edge (#5457)
2026-10-25 01:25:14 +00:00
semmelrindeandClaude Opus 5.5 0477e0ba4e Shell: the dialog sends the picked face's body (#4555) (#6092)
Where a body's face lies flush with another body's face, the face point
alone could resolve to the other body, and Shell then refused with
"select at least one face to remove". The dialog now passes the body of
the picked faces, as the command already accepts.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:12 +00:00
semmelrindeandClaude Opus 5.5 ae7176cc86 Extrude: a face picked under a picked profile is extruded too (#3926) (#6099)
With a sketch profile and a body face picked together, OK ran the
profile's extrude first and then looked the face up by its point. Where
the profile's extrude covered the face, it was gone: "no face of Body1
at face". A new extrude now runs its face picks first; an edit still
rebuilds the profile's extrude first.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:09 +00:00
semmelrindeandClaude Opus 5.5 eef9a68809 Dialogs: a missing pick on OK is guidance, without Create Issue (#3292) (#6101)
Plane at Angle's OK with an empty Plane or Axis input showed "select a
plane first" or "pick an axis" as a red error with a Create Issue
button, and people filed it as a bug (#3292, #3773). A refusal that only
names what to pick is now shown as a plain hint, with no issue button,
in every dialog (Sketch Modify dialogs already hid it).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:06 +00:00
Colin Faulkingham f06875128b Preserve the history marker when switching sketch editors (#5435) (#6103)
* claim: #5435

* fix(ui): preserve history when switching sketch editors
2026-10-25 01:25:04 +00:00
semmelrindeandClaude Opus 5.5 9d226b3535 Sheet metal DXF: options to leave out the bend lines and to use one layer (#4314) (#6130)
sheet.export_dxf always wrote the dashed bend lines (BEND_UP,
BEND_DOWN) and split the flat pattern over a layer for each role. A
cutter that cuts every line it is given cut the bend lines too.
bend_lines: false now leaves them out, and layers: single writes every
entity on layer 0. The defaults keep today's output.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:02 +00:00
Colin Faulkingham 7a1f903216 Close the File menu with Escape (#6126) (#6132)
* claim: #6126

* fix: close File menu on Escape (#6126)
2026-10-25 01:25:00 +00:00
NOWN-DEVandClaude Opus 5.5 b88673f366 Model cache: each sheet body is written once, not with every state (#6152)
* Test: a saved model keeps each sheet body once

A sheet-metal design wrote its sheet bodies again with every later feature's state in the saved
model: each feature that leaves the sheet alone (a box beside it) adds more than the whole sheet
to the records. A design of many features after its sheet metal passed the cache's 32 MiB
manifest limit that way and kept only some of its states (#3220). The test also opens the saved
file and wants the sheets taken from it as evaluated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Model cache: each sheet body is written once, not with every state

Problem: a saved model writes every feature's state, and each state wrote its sheet bodies in
full; most features leave the sheets as they were, so a sheet-metal design of many features
repeated them over and over (a 280-feature part: 30.5 MB of manifest, 29.6 MB of it 69 distinct
sheet records written 243 times). Past the manifest's 32 MiB limit the save thinned the cache
(#3220) and opening evaluated the left-out features again, although the distinct data was small.

Solution: the records keep a list of sheet bodies, each written once; a state names its sheets by
their place in it, as it already does for bodies and sketches. A thinned model keeps the whole
list and counts it once against its budget; the reader counts sheets with the bodies and sketches
a state holds; the cache format is now /4 (an older cache is a miss).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:24:57 +00:00
DuBearteandClaude Opus 5.5 67adf5abb5 Preferences: the theme strip shows arrows where more themes are (#6161) (#6167)
* claim: #6161

* Preferences: the theme strip shows arrows where more themes are (#6161)

The strip scrolls sideways with a hidden scrollbar, so nothing showed that
more themes were past its end. An end with themes past it now shows a
chevron button over the tiles there; a click scrolls most of a page.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:24:54 +00:00
Dahak BuildsandDahak Builds adbd2adf89 view.pick: map screenshot pixels to exact geometry (#6304) (#6329)
* claim: #6304

* view.pick: map screenshot pixels to exact geometry (#6304)

A read-only command that answers, for screenshot pixels (window or model
frame) or world-space rays: body, face index, exact world point and
outward normal, depth, occurrence/component for placed parts, and the
nearest edge/vertex within edge_px. Faces are raycast through the same
per-body pick index the mouse uses; flat faces are solved exactly
against their plane, curved faces take the mesh hit with the normal
interpolated from the mesh's surface normals. Section-aware: faces on
the removed side do not stop a pick and the cut cap answers with
section_cap. Never touches the selection, camera, document or undo.

Exposed as control ui.pick and as view.pick through engine.execute and
engine.batch (and through them MCP execute and batch).

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-25 01:24:39 +00:00
Dahak BuildsandDahak Builds 96303873fe Sketch: right-click toggle between driving and driven dimensions (#320) (#6357)
* claim: #320

* Sketch: toggle a selected dimension between driving and driven (#320)

A selected sketch dimension now offers 'Toggle Driven Dimension' in the
viewport right-click menu, running the existing engine command
sketch.toggle_driven. The over-constrain -> driven placement half landed
in #366; this exposes the engine's toggle in the UI, the remaining gap
from the retest notes on #320.

- context_menu: sketch_entity_items collects selected SketchConstraint
  ids that are dimensions (kind.value() is Some) and, for a single
  selected dimension, prepends the toggle item aimed at that constraint.
  Non-dimension constraints and plain entities get no item.
- Label reuses the existing catalog entry cmd.sketch_toggle_driven, so
  every locale translates it with no catalog change.
- Test: the menu offers the item for a selected dimension, running it
  round-trips driving -> driven -> driving, and a horizontal constraint
  or a plain curve gets no item.

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-25 01:24:36 +00:00
NOWN-DEVandClaude Opus 5.5 b925a1af3d Configurations: a long table builds only the rows on screen (#6366)
* Test: a long configuration table builds the cells of the rows on screen

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Configurations: the table builds the rows on screen and its cells once per change

A table of hundreds of configurations was slow to open and to use: every frame cloned the
whole config.table answer, rebuilt every cell's text, looked each parameter's unit up once
per cell and built an editor for every cell of every row, on screen or not.

The answer and its cells (with units, looked up once per column) are now kept per design
revision, and rows off screen keep their space without building their cells, as the
parameters table already does. A row with an edit in progress stays live, so leaving its
cell still commits the edit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:24:33 +00:00
Matthew KnutsonandClaude Opus 5.5 05d43d3542 Windows: the taskbar button shows the mark when the first frames are slow (#6391)
The taskbar asks a window for its icon once, when the window appears. eframe
sets the icon while the window is still hidden and shows it after the first
frame; when that frame is slow (safe mode's software renderer) or startup kept
the UI thread busy long enough for Windows to mark the window as not
responding (building the viewport pipelines), the request isn't answered in
time, the taskbar falls back to the window class's icon, and winit's class has
none: the button showed Windows' generic icon for as long as the window was
open.

Give the class the exe's embedded icon (resource 1) before the window is shown.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:24:26 +00:00
NOWN-DEVandClaude Opus 5.5 c0640cb95e inspect.parameter_sweep: check a design across a parameter's range (#2273) (#2276)
* inspect.parameter_sweep: check a design across a parameter's range

Rebuilds a copy of the design at each value of a parameter and reports what
no longer holds compared with the design as it is: features that fail or
warn, joint origins that are lost or turn over on their own part, sketch
planes that turn over, and sketch solves that fail or fold. The design is
not changed; each value's rebuild time is reported too.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.parameter_sweep: params doc matches what it takes and returns

`steps` takes at most 199 (200 values), as the check says; failed and
warned entries carry the feature's name; a lost origin says which one; a
value the parameter refuses gives {value, ms, ok: false, error}. The
refusal test covers steps 200.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.parameter_sweep: Japanese and Chinese labels

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-25 01:19:00 +00:00
2ff17c0fcb 3D mouse: follow the device that moves, not the first one found (#3988) (#4339)
* claim: #3988 (3D mouse: follow the device that moves, not the first one found)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: follow the device that moves, not the first one found (#3988)

On Windows and macOS the reader opened the first 3D-mouse interface it
could and read it until it failed. A 3Dconnexion Universal Receiver with
nothing paired opens fine, has a valid layout and never fails, so it kept
the reader for good. A SpaceMouse on a cable next to it was never read
("Not calibrated (hid 256f:c652)", every axis at zero).

The reader now opens every candidate and follows the one in use. The
first is followed from the start, as before. Another takes over once it
shows use (an axis off zero or a button down) while the followed one has
shown none for STALE_AFTER, so two devices moved together don't trade
the reading. A candidate that fails is dropped; if it was the followed
one the reading resets and the next is read. With one device the reader
behaves as before, down to the 100 ms read timeout. Several take 10 ms
turns, and reports queue in the system meanwhile.

The selection is `follow()`, written against a small `ReportSource`
trait, so it is tested with simulated devices on every platform: an idle
receiver next to a SpaceMouse, two devices in use at once, and devices
failing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: a press that makes a device the one in use counts as a press

Since #3825 a HID device's first button report after it connects is its
baseline: a button down in it is held, not pressed. A device taking over
from another one was connected at that moment, so the press that took
over was swallowed. With an idle Universal Receiver found first, that is
the first button press on the SpaceMouse.

follow() now keeps the buttons each candidate last reported while another
was read, and the reader hands them to the reading as the baseline when
that candidate takes over. A device that reported no buttons before it
took over keeps the held-not-pressed rule.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:18:34 +00:00