Every STL, OBJ and 3MF export meshed each body with a chord tolerance of
2e-4 of its size, with no way to ask for finer: a 3 mm hole in a 200 mm
part came out with about 14 sides. file.export and file.save_mesh take
`quality`: standard (as before, the default), fine (5e-5) or finest
(1e-5), and Save As Mesh has a Quality row, remembered like its format.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5024
* Hole: refuse a position that isn't on a face (#5024)
`solid.hole` took any `position` and drilled from the nearest face, so a
point 1 mm past a box's side was accepted and cut a hole across the edge.
A position given as a point (numbers or length expressions) must now lie on
a face of a body, within the same tolerance the plastic features use for
their placement (the check is shared with them). Holes at sketch points are
unchanged.
* Hole: a position over the mouth of a bore or opening of a planar face is on that face (#5024)
A counterbore is centred on an existing bore, in the plane of the face round it.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #5329
* Update Links: show which linked design it reads, off the window thread (#5329)
Update Links read and rebuilt every linked design on the window thread, so the
window froze, with nothing on screen, until it finished. From the toolbar it now
runs as a file operation: off the window thread, with the overlay naming the
linked design being read (cover (2 of 3)), its rebuild step and progress, and
Cancel. The assembly stays as it was until the update is in, and it lands as one
undo step. The command reports each design through doc::progress::item.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The cap pass redraws every back face behind a marked pixel with depth test
Always to put the section plane's depth there, and it also wrote colour.
The last back face drawn painted the cut, so a body behind the cut (one
inside another's hollow, an assembly's inner parts) showed through it in
its own colour and outline, like an X-ray. The pass now writes depth only;
the marking passes have already drawn the nearest back face's colour (the
same split as #4622).
Test: a_body_behind_the_cut_does_not_colour_the_cap in
crates/gpu/tests/capture.rs (a red body in a green box's hollow, 4 mm
behind the cut: the picture is the same with and without it, hatched and
plain, orthographic and perspective). On main 472 pixels differ.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The viewport's picker took the nearest face along the ray whatever the
section removed. Over a cut it hovered the cut-away face in front of the
plane (the outer wall of a sectioned hub, say); the shader clipped that
face's tint, but its outline, drawn dimmed where the model hides it, ran
behind the cap and showed through it. While orbiting with the pointer on
the model the hovered face changed from frame to frame, so lines and
patches of the far side came and went over the hatch.
The picker now does what view.pick already does: faces, edges and corners
on the removed side are skipped (the ray walks past them), and where the
plane crosses a body nearer than any kept face, the cap hides the faces,
edges and corners behind it and nothing is hovered there. The walk that
tells whether the plane is inside a body moves into
view_pick::body_cut_at so both pickers share it.
Test: view_pick_tests::the_mouse_picker_stops_at_a_section_cap (a box
with a pocket, cut through the pocket: over the cut material nothing is
picked, over the pocket its floor, and with the section cleared the top
face). It fails on main, which picks the removed top face.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5938
* Edge flange: height measured from the outer sharp, the inner sharp or the bend tangent (#5938)
An edge flange feature takes height_from (outer, inner or tangent) in sheet.flange and Height From in the Flange dialog, saved only when it is not the outer sharp. A height shorter than the bend takes is refused with the smallest height that fits.
* Edge flange: material outside and tangent bend positions (#5941)
An edge flange's position can now be material_outside (the inner virtual sharp on the edge) or tangent (the bend's outer face tangent to the edge's face), in sheet.flange and the Flange dialog. The bend starting at the edge was already the outside position, which now also answers to bend_outside.
* claim: #6252
* Open hosted designs in the web app and add an embed layout
Fixes#6252.
Fetch HTTPS design links with bounded reads and open them as unsaved copies.
Keep model panels and joint controls in embeds without browser persistence,
application chrome, or unload prompts. Add a full-app link and iframe docs.
Cover query parsing, hostile URLs, size limits, and the compact layout.
* Translate the linked-design messages into Japanese and Chinese
* claim: #4167
* Viewport: ambient occlusion no longer shows ghost copies of the model (#4167)
The AO shader used the same 32 sample offsets at every pixel, and nothing smoothed the
result. On a flat face, each sample darkened its own shifted copy of a nearby part's outline.
Where the radius is large on screen (a big design seen close up), those copies show as faint
separate ghosts of the part. Where it is small, they pack into stepped bands along contacts
(#3407).
The sample pattern is now turned by a different angle at each pixel, using interleaved
gradient noise of the pixel position (Jimenez 2014). The copies break up into an even fine
grain, which 2x supersampling smooths further. The cost is per pixel only (one noise value,
one sine and one cosine). The 32-sample loop, the depth prepass and AO off are unchanged.
Test: ambient_occlusion_draws_no_copies_of_a_part (viewport.rs) renders a block on a plate
from above with AO off and on. AO must still darken beside the block, the plate must stay
clear beyond the radius, and the profile beside the block's straight side must have no
copy-sized steps (0.0144 before, 0.0026 after; limit 0.005). The test-only offscreen helper
gains an AO radius, like render_offscreen_ssaa.
Fixes#4167
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
At launch the app adds the solidcraft entry to each installed AI client off the window thread,
names newly connected clients once, and refreshes a stale path. Settings > Assistant has
"Make SolidCraft available to AI apps on this computer" (on by default); off removes the entries it
added. Entries the user changed are left alone; automation runs never touch the files.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2926
* Edit Feature: a primitive in a moved component keeps its placement (#2926)
Edit Feature passes a primitive's placement (corner, base, axis, center)
through as saved, in its component's frame, as timeline.inspect reports it.
timeline.redefine read it as a world point and mapped it through the
component's placement, so in a turned component the edit moved the
primitive: in the Hinge Assembly, Leaf B's rod flipped and the revolute
joint put the leaf on the other side.
A placement equal to the saved one now stays as saved; a new one is still
mapped from the world.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TBKuBKHW3LfC7CMW1HYpwL
* Move the #2926 tests up in frames_tests.rs
They sat at the end of the file, where main has since added the #6000
test; moving them avoids the merge conflict.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Every command in a design with placed components places their bodies
again on up to 16 threads, though nearly all of them are taken as they
were placed before (the same body by the same matrix). Those are now
taken on the calling thread and only the rest are placed on threads.
Warming the meshes (and display plans) of a state likewise starts
threads only for the bodies that have none yet.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
solidcraft-cli mcp setup (alias install) and Help > Connect AI assistants edit each installed
client's own configuration in place, with this program's absolute path: OpenCode, Claude Desktop,
Claude Code, Cursor, Codex, Gemini CLI, Copilot CLI, Windsurf, Zed and VS Code. Only the solidcraft
entries change; a stale path is refreshed and an entry the user changed is left alone.
Plain mcp keeps looking for the app while its headless session has no work, and says on every
tool result that it is headless when the app was not found.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4094
* Sheet metal: Path Flange, a chain of bends on an existing sheet edge (#4094)
Path Flange (`sheet.path_flange`): sketch an open chain of lines across a sheet edge, pick the
edge and one line; each line becomes a flange as long as the line and each corner a bend, one
feature and one body. The edge flange takes further bends (`then`), each on the far edge of the
one before, and the Flange dialog shows them as rows with a bin each.
* Release: sign and notarize the macOS app with a Developer ID (#5749)
package.sh --sign signs the app, the CLI and the DMG with the hardened runtime and a secure
timestamp, notarizes the DMG and the CLI zip, staples the DMG and checks it with stapler and
spctl. The app carries entitlements.plist: com.apple.security.cs.disable-library-validation
lets the hardened runtime load 3Dconnexion's client framework (crates/threedx-client).
signing.sh --setup imports the certificate into a temporary keychain and writes the API key;
--cleanup removes both. The release workflow builds both architectures first (macos-build, no
secrets), then signs and packages in the join job. Without the APPLE_* secrets (forks, dry runs)
the app keeps its ad-hoc signature and the job summary says so.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* macOS release: staple the app before the DMG, retry stapler, document renewal (#5749)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #3271
* fix(ui): use document units across length fields (#3271)
* Format
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Adapt drag-extrude and joint tests to document-unit length helpers
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(ui): preserve blank parameter drafts and cover bounded lengths
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Selection fields: only the active one looks active
* Selection fields: a filled field keeps its tinted border where a theme fixes the control border's colour
* Select Other: Shift and Ctrl add the choice to the selection, as a click does
* Select Other: follow origin visibility rename in test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Select Other test: click away from the lines' midpoints, which are picks of their own now
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2320
* Value fields step with the arrow keys and the mouse wheel (#2320)
Up/Down in a focused value field step a plain number by 1 in the unit it is written in
("20 mm" -> "21 mm", "2,5 mm" -> "3,5 mm"), 10 with Shift and 0.1 with Alt; the wheel over
the focused field does the same, a step a notch, instead of scrolling the panel under it.
Expressions such as `width / 2` are left as typed, and an open completion list keeps the
arrows. Every expression field gets this through `params_dialog::complete`: the value box
beside the geometry in every dialog, the dialog rows, sketch dimensions, the dimension
editor, Drive Joint and the Parameters window.
* The value box beside the geometry stays under the pointer
The box rides on the arrow's tip, so each wheel notch that stepped its value moved it, and
after a notch or two the box slid out from under the pointer and the wheel zoomed the view
instead. While the pointer is over it the box now keeps its place, and it goes back to the tip
when the pointer leaves.
* Value stepping is a preference, off by default
Preferences › General › "Step values with the arrow keys and the wheel" (`step_values`,
also through `ui.prefs`) turns on Up/Down and wheel stepping in value fields, and the value
box staying under the pointer while the wheel steps it. Off, as by default, value fields
behave as before: Up/Down move the text cursor, the wheel scrolls, and the box beside the
geometry follows its arrow.
* Value stepping test: Bend Radius is under Advanced now
* Value stepping test: the preference is on the Design page
* Value stepping test: draw the field straight into the test's frame (#2320)
The shared outer-host rule now covers tests too; the field needs no panel around it.
* claim: #4968
* Sheet metal rules: bend angles as the included angle (#4968)
A sheet metal rule's angle_display (bend, the default, or included) sets
how the DXF bend notes read each bend: a 58° bend is B1 UP 122° R1 under
an included rule. The bend table always gives included_angle_deg beside
angle_deg (CSV and JSON). Set in sheet.manage_rules and the Sheet Metal
Rules dialog, listed by sheet.rules; the flange angle stays the bend angle.
* Bend table: the included angle as the CSV's last column, so the columns before it keep their places (#4968)
A test also covers a body whose base flange names its rule, which keeps that rule's notes whichever rule is active, and a bend down.
* Sheet Metal Rules: Angle Display reads Bend or Included, so the choice fits its box (#4968)
The rule editor's row contract lists the new row and the key the dialog sends.
---------
Co-authored-by: begsaquib <saquibbeg4444@gmail.com>
* claim: #5580
* fix: follow named lid edges after parameter changes (#5580)
* fix: initialize viewport test frame tints
* Drop duplicate tint fields in gpu view tests (main already has them)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5907
* Fix Manage Units to open the shared unit menu (#5907)
Open the browser's existing unit choices for interactive command starts
instead of executing document.units without its required parameter. Anchor
the menu below toolbar buttons and menu rows. Choices still run the normal
command, while programmatic calls require an explicit unit.
Cover error-free opening, unit choices, button anchoring and dismissal,
the current-unit marker, one-step undo/redo, and programmatic calls.
Fixes#5907
* Sketch Dimension: point or circle to the edge of a circle or arc (#4064)
Adds PointCircleDistance and CircleCircleDistance (edge-based, like #1863):
solver, constructive seed, drawing, command wiring, tests, UI scenarios and docs.
Saved designs gain two constraint kinds, in one pending format file.
Fixes#4064.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch Dimension scenario: pick the circle at its top edge (#4064)
The bottom edge sits under the Dimension tool's status hint in the scenario window, so the second click never reached the tool.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #5439
* Agent chat: each design tab keeps its own conversation (#5439)
* Adapt chat-per-tab changes to the new Pending context and cursor tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
solid.revolve already revolves a planar body face (`face`, `face_body`), but
the Revolve window's Profile input took sketch profiles only, so a face
couldn't be picked. The input now takes planar faces too, and a picked face
is sent as `face`; sketch profiles win when both are picked.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5467
* Warn when a design is open elsewhere or changed on disk (#5467)
The desktop app keeps a lock file next to each open design
(.~<file>.lock: computer, user, version, opened and refreshed times),
refreshes it every minute and removes it on close; a lock not
refreshed for three minutes is stale and ignored. Opening a design
that another SolidCraft has open asks: Open Read-Only, Open Anyway or
Cancel. A read-only design saves only to another file.
A design remembers its file's size and modification time when it is
opened or saved. Save over a file another program or computer changed
since asks: Save a Copy (the default), Overwrite or Cancel.
Programmatic calls never ask: doc.open reports open_elsewhere and takes
read_only, and file.save over a changed file returns an error until it
is given overwrite: true. ui.documents answers both questions.
* claim: #5336
* Editing an Extrude or Revolve shows its sketch (#5336)
A finished sketch is hidden once a feature uses it, and it stayed hidden
while that feature's dialog was open for editing, so no other profiles
could be picked. The session now holds the sketch of the feature being
edited; the edit dialog sets it while it is open and clears it however
it closes, and that sketch is drawn without changing stored visibility.
* claim: #2063
* Windows OpenGL: use the system title bar so the picture lines up with clicks (#2063)
On Windows with only OpenGL to start, the window opens with the system
title bar instead of using the application bar as its title bar. The
window without OS decorations keeps its caption style while having no
frame, and some OpenGL drivers (older Intel HD/UHD) show the picture a
caption's height lower than the window, so clicks land above what they
point at. Direct3D 12 and Vulkan keep the custom title bar.
The choice is made before the window opens, from the backends wgpu
starts, so the window never changes its frame while OpenGL draws into it.
* claim: #5377
* Report a bug: title from the workspace and the reporter's words (#5377)
With no dialog open the report was always labelled "Modeling" and its
summary pre-filled as "unexpected result", so every such report arrived
titled "Modeling: unexpected result" and the fallback to the first line
of "What happened?" never applied.
Label the report from the active workspace (Part, Sketch, Surface, Sheet
Metal, Plastic, Mesh, or Render), leave the summary empty so the title
becomes "<workspace>: <first line of the description>", and keep
"operation failed" when an error was recorded. The summary field now
hints that a short title is optional.
The triage script that asks for an empty in-app report to be pasted
recognises the new titles.
New UI strings go in assets/locales/pending/<slug>.json and new ATTRIBUTION.md rows in
attribution/pending/<slug>.md. The app build, xtask lists/i18n/assets read them as part of the
catalogs, and the Generated files workflow folds and deletes them on main with
cargo xtask fold-pending.
Refs #6439
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4031
* Triangulation: split a crossing boundary segment ourselves, never in spade's assert (#4031)
A trimmed face's boundary segment that crosses a constraint already in the
triangulation went to spade's add_constraint_and_split, which asserts
(cdt.rs:978, `!previous_region.is_empty() || from == final_vertex`) when a
split lands so near another vertex or constraint that the piece up to it is
blocked. The kernel guard caught it, but the whole operation failed and a
crash report was written; a STEP body imported empty or not at all (#4598,
also #4293, #4478, #5068, #5229).
PolyBoundary::add_constraints now adds every segment that can be added, then
splits each blocked one itself: a vertex at each crossing, inserted from the
crossed edge's own vertex, and the pieces between added where they can be. A
segment with crowded or very many crossings, or a face with more than four
blocked segments (a rim that runs back and forth across itself), leaves them
out, as truck did before #1653, so the face meshes slightly off instead of
not at all. Pinched faces (#1648) still split where they cross.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>