The ribbon's command-search field had its own area at `Order::Foreground`, so
it painted above every system window: a Preferences card moved under the top
right corner showed the search field floating on top of it, while the rest of
the ribbon went under the card as it should.
Closed, the field is ribbon chrome and now draws at `Order::Background` with
the rest of the ribbon; open (or animating open or shut), it keeps
`Order::Foreground` so the results sheet still floats over every window.
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
On 0.21.0 the facts test failed on rectangle symmetry, which now works
on two sides. Other statements in the modeling and mechanisms skills
also no longer match: edge picks have a distance limit, concentric
circles extrude as a ring, a hole sketch below a part drills into it,
slot ids count on from earlier curves, shell refuses curved blends and
lofts, measure and inspect_design grow with the body count, and
joint.sweep needs occurrences with against.
Each correction has a test in test_facts.py.
* Fillet/chamfer: find each edge on its own body
A blend picked over edges of several bodies was evaluated on one body,
the one nearest the first pick, and every edge was named on that body
when the feature was made. Picks on the other bodies were named after
that body's nearest edge and rounded it instead (or moved to it by
position once an upstream edit moved them). With two stacked boxes, a
height change put the upper box's picks on the lower box's rounded
corners: the upper box's fillet resolved there and its own edges lost
their rounds.
Now each edge is named on the body it was picked on, and evaluation
finds each edge's body by its stored name (a gone name stays on the
feature's other bodies), groups the edges by body and blends each body.
A name an older build recorded on the wrong body (the pick lies outside
the box its reference recorded) is not used; the pick finds the edge.
A pick an upstream edit left at an end of its named edge goes to the
edge's middle, so the kernel cannot take the neighbouring edge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fillet/chamfer: skip the per-body lookup when there is one body; name each body's picks in one pass
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Performance overlay: frame-time graph and histogram, triangles, draw calls (#2548)
Net change of the perf-overlay branch, rebased onto main as one commit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Document frame_rate_details in ui.prefs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #4971
* Thread: the refusal for a fine-only size says what to type (#4971)
M28 and other sizes without an ISO coarse pitch were refused as an
unknown thread, with examples of other sizes. Thread and threaded Hole
now say that the size has no coarse pitch and suggest two to give, such
as M28x2 or M28x1.5. The coarse table is unchanged.
* Thread: automatic sizing past M56 says what to type (#5055)
Automatic thread sizing only knows the ISO coarse sizes up to M56, so a
75 mm shaft was refused with "no metric thread fits a 75.00 mm
cylinder", although M75x2 and M75x3 work when typed. Past the end of
the coarse range, the refusal now says so and suggests two sizes with
their pitch, scaled to the diameter (a hole's size adds one pitch to its
bore). The coarse table is unchanged.
MidPoint on a point and a line keeps the first pick still and moves the second.
With the point picked first (an end of one line, then the line it should sit in
the middle of), the line turned about its far end to bring its middle to the
point: a line from (0,0) to (20,0) went to (0,0)-(10,10) for a point at (5,5).
A point and a line now put the line first, so the point moves and the line
stays; the line still comes to the point when the point can't move.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5009
* Assistant: a request timeout per endpoint for slow models (#5009)
An OpenAI-compatible endpoint now stores how long one model request may
take (request_timeout_s, 300 s by default, clamped to 30 s ..= 1 h). It
is set in the Add agent dialog and in the endpoint's entry under Agents
(a running conversation uses a change from its next request), through
ui.agent_chat add_agent, and reported in the chat's state. A request
that runs out of time says the limit and where to raise it instead of
"timeout: global". The desktop HTTP cap goes from 900 s to an hour.
The tool-call timeout stays 330 s: it covers SolidCraft's own tool work
and the user's Allow, never the model.
* Assistant settings: line up an endpoint's Request timeout with Permissions
The label column of an agent's entry is wide enough for "Request timeout",
so the label isn't cut and both rows share one column.
* Undo: what is hidden lives in the snapshot, so hiding is a step (#2219)
`Session::execute` records a step only when the document `Arc` changes, and what is
hidden lives in `Session::visibility` — saved with the design, but outside the
document. `browser.visibility` was also declared `.noundo()`, and `Snapshot` had no
field for it, so even a recorded step could not put a hidden body back: undo went to
the command before the hide and left it hidden (#2219).
`Snapshot` and `Checkpoint` now carry the `Visibility`, `go_to` restores it, and
`Session::execute` treats a visibility change as a change of its own. That change is
display-only, so it refreshes the view with a revision bump (`refresh_display`)
instead of evaluating a model a hide does not touch.
The command also takes `folder: "all"` (every body, sketch, construction item, origin
item and joint, plus the browser folders and occurrence hides) so Show All can be one
step, and asking for the state an item already has no longer reorders the hidden
lists: a redundant hide is not a step and leaves no unsaved changes.
* Show/Hide: the menus run browser.visibility, so the history has it (#2219)
The hide and show actions wrote `session.visibility` directly instead of running the
command: the body and face menus (`ui.hide` / `ui.show`), the `V` key
(`context_menu::toggle_visibility`), the browser rows' eyes, the Origin rows and
`ui.originAll` / `ui.originPart`. The engine could record a step and there was
nothing to record — which is why the release still answered "nothing to undo" after
hiding from the Browser.
They all run `browser.visibility` now (the repo rule that the UI acts through
commands), and `ui.showAll` is that one `folder: "all"` call, so Show All is one undo
step rather than three. `docs/occurrence-workflows.md` says what visibility does in
the history.
assets/locales/ko.json had 298 ids that en.json has and it lacks (the
help.solid.* texts, the whole Preferences page, the issue-report dialog,
history names, ribs, mouse gestures and navigation presets). Add Korean for
297 of them; "Of" is left untranslated because its context is unclear.
Wording follows the existing ko.json (필렛, 모따기, 돌출, 쉘, 바디, 피처,
비활성화, 환경 설정, 어시스턴트, 에이전트). The file stays in the canonical
sorted one-message-per-line form; no existing message changed.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #4337
* Measure picks projected and intersection sketch curves (#4337)
Dialog inputs turned away every curve or point of a sketch that is not the
active one, which includes projected and intersection curves, so Measure
took the nearest item it did accept instead. Give Measure explicit
acceptance for these references, keep the source sketch on a click, and
accept them from a pre-selection and a box selection. Other inputs keep
their restrictions.
* claim: #3892
* Browser tree hover stays fast on a nested STEP assembly (#3892)
Hovering a placement row lit its whole subtree by walking it again
(Session::occurrence_bodies) on every frame, and opening a STEP file
makes its top placement active, so every highlight rebuild walked the
whole assembly again for the active placement's bodies. On a nested
assembly each walk resolves every placement below it, which cost
0.5 s or more per walk.
- Session::occurrence_bodies remembers its answers per placement until
the document, the evaluated model or the pending moves change
(occurrence_bodies_shared hands out the shared list).
- The highlight looks hovered bodies and faces up by name instead of
scanning the hovered list once per body.
* claim: #3222
* Sketch drag: project a face sketch's links once per live gesture (#3222)
Every live sketch.drag frame refreshed the sketch's links before solving
the drag. For a sketch on a face that projects all of the face's edges
again: 115-460 ms per frame on the top face of a 600 x 500 mm plate with
120 holes imported from STEP, against about 1 ms for the drag's own solve.
The model the links come from cannot change during the gesture.
The session now remembers the sketch, document and revision a live frame
left. The gesture's next frame reuses the links while nothing else has
run: any other command (undo included) or any other change to the design
makes the next frame project them again. A test counts the projections.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch drag test: drop an unread assignment (#3222)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3883
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Find in Browser finds the body; Find in Timeline opens the feature's folders (#3883)
A right-click on a body in the viewport picks a face, and the face menu's
Find in Browser selected the face's creating feature in the Features folder
instead of the body. It now reveals and selects the body, as the edge and
body menus already did.
Find in Timeline now opens any collapsed history folders around the feature,
and opens the Browser's Features folder for the picked occurrence, scrolled
to the feature (the reveal formerly behind Find in Browser).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Find in Browser opens collapsed rows above the body and finds later placements (#3883)
Open the document, placement, Bodies and group rows when the command runs, not while the
Bodies folder is drawn, so a collapsed ancestor no longer hides the body. Match the scroll
target by the placed body's world name, and fix the group row key ({scope}/g{id}).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Find in Browser picks the body's own placement; Find in Timeline leaves the Browser alone from rows (#3883)
Every component's first placement keeps the definition's body name, so the root placement
matched before the body's own one and Find in Browser on a first copy opened nothing above it:
the placement must belong to the body's component too.
Find in Timeline from a sketch, construction plane or feature row has no body to say which copy
was meant, so it opened the Features folder of whichever placement came first (the other copy),
or one that never lists sketches. From those rows it now only reveals the feature in the
History; from a face, edge or body it still opens that body's copy's Features folder.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With an opened STEP assembly's imported root active (it owns no body), a
Join revolve, sweep or loft from a sketch on a nested part's face made a
separate body, and a hole at the points of such a sketch found no body to
cut. A Join with no targets now takes the body its profile sketch is on,
through the same active scope as an extrude, and a hole counts as a cut
for the rule that a cut from a component with no body works on every body.
Refs #3223
* claim: #4236
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Coil: store an optional sketch and profile selection
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Coil: sweep a sketch profile along the helix
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Coil: accept a sketch and profile selection
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Coil dialog: pick a sketch profile for the section
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Coil: cargo fmt
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Coil: refuse a loaded sketch coil that also sets the primitive section
A saved design could add section, section_position or start_angle to a
coil that already has a sketch; eval ignored them instead of refusing the
contradiction as the command does.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Coil: assert the kernel refusal and exercise hostile profile selections
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Coil dialog: keep the sketch-profile check after rebase
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Format
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Code <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* feat: extrude a face or profile by pressing on it and pulling
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* feat: pull-to-extrude keeps the window open and sets the step by sideways motion
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pull to extrude: coarser step changes, a step ladder below the pointer, the step in the distance box
The step label sat on top of the distance box at the arrow tip. It is now a ladder of the
step in use between its neighbours, below the pointer, and the distance box also names the
step ("Step 1 mm"). One step change takes 44 px of sideways travel instead of 22.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Pull to extrude: a setting, off by default (Preferences > Navigation)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Rename the pull setting to Direct interaction
It will also cover other direct gestures in the viewport later (grabbing an edge to round it).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #4853
* Sketch on a turned occurrence: reuse moved bodies across edits (#4853)
A sketch with a face anchor is evaluated in its component's frame.
state_in_frame_at moved every body placed differently from that frame
with a fresh transform on every evaluation, and the face-anchor frame
moved the anchored body again, so each sketch edit on a turned or moved
part transformed and re-meshed it.
The model now keeps the bodies it moved into a feature's frame, keyed on
the source body and the exact matrix (and checked against the source's
mesh, geometry, colour, paint and split lines, as world placement does).
An unchanged body under an unchanged placement is moved and meshed once.
Each evaluation starts a new generation and drops entries that neither
it nor the one before used, so the cache holds only placements in use.
Model states hold a weak reference, so the cache never keeps earlier
states alive.
Fixes#4853
A circular or rectangular pattern of a hole and the chamfers on its edges failed with
"no edge near ..." when a chamfer was picked before the hole: the chamfer was copied
first, onto a body that had no hole there yet.
Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
projection() reads the model's box for the scene's depth, several times a
frame, and model_bounds() sampled every sketch's curves for it each time,
hidden sketches too. A 533-feature design with 445 sketches spent about 45 ms
of every frame there (stack samples: model_bounds -> Sketch::bounds -> segs ->
spline polylines), so orbiting ran near 16 fps. The sketches' box is now kept
for the world state it was made from, as the bodies' boxes already are.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4099
* Measure: a face or edge picked by its point alone (#4099)
inspect.measure (and the MCP measure tool) refused a face or edge item
without an index ("missing field `index`"). Face and edge items are now
read as body + point with an optional index: the point finds the face
(the same lookup face picking uses) or the nearest edge within the pick
tolerance, before the selection is built. A missing body or a point on
no face or edge is a clear error. Explicit indices still work.
* claim: #4098
* Extrude: document which way a positive taper goes (#4098)
A positive taper slopes the walls outward (the far end is larger along the
extrusion direction), a negative one inward. Say so in the params doc, the
JSON schema and the guide, and pin the sign with a test.
* Offset of free-form curves: trim folds, round chain corners
Offsetting a spline by more than its tightest bend failed with "offset spline
has no interior certificate correspondence": the plain offset folds over itself
there and a single linked spline cannot follow it. A chain of Bézier curves (any
imported SVG outline) was refused outright.
Such an offset is now the parallel boundary: the plain offset of every piece,
joined round each corner by an arc about it, trimmed where it folds or crosses
itself (a sharp corner is left), each kept run fitted with an open spline and
certified to the offset tolerance, and the whole proven free of crossings. Tiny
kinks are joined directly; zero-length Bézier handles (infinite curvature at
the end) are replaced by their chord within a quarter of the tolerance. A
single curve whose plain offset is smooth still gets the linked offset; the
trimmed or chained result is ordinary curves, not linked to the source, so the
command adds no distance parameter for it.
* Offset chains mixing lines or arcs with free-form curves
A chain offset read every curve with Sketch::exact_segs, which only covers free-form
curves, so a chain with straight or circular pieces (a text glyph, an SVG path with
L commands) failed with "offset source changed shape". Read them with exact_pieces,
which gives lines and arcs from their analytic form; the trimming already handles
those pieces.
The solver takes at most 4000 unknowns in one connected group, and a
pattern joins all its copies into one, so a hexagon patterned 17 × 20
(4000+ unknowns) failed as "that would over-constrain the sketch
(conflicts with )", naming no constraint. The solve report now carries
the size of the largest group it could not take, and the failure says
how many unknowns are joined, the limit, and that fewer copies or
several patterns or sketches stay within it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3786
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sketch: the first dimension scales only a connected drawing (#3786)
The first length dimension scaled the whole sketch about its origin, so a
second rectangle that nothing links to the first was resized and moved too.
Now the sketch scales only when its curves form one chain, joined by shared
points or constraints (the origin counts as a point); separate shapes keep
the previous behaviour: the dimension sizes the shape it measures.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Dragging one end of a line tangent to a circle or arc let the solver move the
line's other end too, sometimes far ("goes flying"): only the dragged point was
held, and the least-squares step spread the change over the free points. The
drag now first tries holding the line's far end as well, and falls back to the
old solve only when that can't be met. Dragging the end of a tangent line to
(5, 12) moved its other end 0.399 mm on 0.19.0; it now stays put.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Release 0.22.0: version bump, design format 35
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Release 0.22.0: tests no longer expect the folded render and material changes to be pending
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A cut starting on a face of its target runs its tool on behind the start plane with the
tool's slope. A taper that widens the pocket narrows the tool there, and a corner arc
smaller than the run on times tan(taper) closed: "the taper closes the profile", though
the pocket itself only grows. The run on is halved, quartered, then dropped (the tool
starts on the face with its straight foot) until the tool builds.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The fastener tables stopped at M3 and M20. The socket head cap screw (ISO
4762), hex bolt (ISO 4014), hex nut (ISO 4032) and plain washer (ISO 7089)
tables, and the coarse pitches they use, now have M2, M2.5, M14, M24 and M30
too, in size order. Set screws and dowel pins are unchanged.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5202
* History: show the sketch at the marker while it's the current step (#5202)
A sketch a later feature uses is hidden, so moving the History marker
onto it changed nothing in the view. The sketch immediately before the
marker is now drawn even when consumed or hidden; its stored visibility
is untouched, and earlier sketches, hidden components, groups and the
Sketches folder still apply.
* claim: #4717
* Canvas: a plane seen edge-on doesn't take the image (#4717)
Placed with a click at a sketch's origin, the canvas went onto the origin's XZ square, which
is under the cursor there too and was the first plane hit. From the Top view that plane is
edge-on, so the image was out of sight and Canvas seemed to do nothing. A plane hit counts only
when the view shows it (its normal more than ~11.5 degrees off the view's edge-on direction); the
sketch plane, or another plane, takes the image instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With Sketch Dimension on and nothing picked yet, a click on a dimension
that is already in the sketch opens its value box, the same in-place
editor a double-click opens without a tool. Enter applies, Esc cancels,
and the tool stays on for the next dimension.
The dimension's text always takes the click; its lines only away from
sketch points and curves, which still start a new dimension (the rule
plain selection uses). Once a new dimension is under way, clicks keep
their meaning. Dimensions off in the selection filter are left alone.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3032
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Create Sketch leads the right-click menu on empty space too (#3032)
A right-click on empty space in the viewport now starts with Create Sketch, in
the same place as a right-click on a plane (#1354): first, then a separator.
Over a plane it sketches on that plane, as before; on empty space it is the
toolbar's Create Sketch, so the next click on a plane or planar face starts the
sketch there. The menu offers it once.
Tests: empty_space_leads_with_create_sketch (the list) and
create_sketch_from_empty_space_sketches_on_the_plane_clicked_next (the harness:
right-click empty space, pick it, click XY).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Slightly fix the extend tool
* Extend: add the line the preview draws, and stop an arc on another curve
sketch.extend reported "nothing to extend to" whenever nothing stood in the
line's way, even though the viewport previewed a line past its end; with
nothing in the way the extension now runs as far as the preview shows, on the
same measurement, so the click adds what was drawn.
An arc extension that ran into another circle or arc refused the target when
its crossing already belonged to another curve's end (a shared crossing point
of two circles): that point is now joined instead, so the extension closes onto
the geometry that is there.
---------
Co-authored-by: SolidCraft Dev <dev@solidcraft.local>
Co-authored-by: n0tfr3shm1lk <n0tfr3shm1lk@ukr.net>
* claim: #4854
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch palette: the Tie button shows "Tie", not its catalog key (#4854)
The button passed the key itself to ui_kit::button with Button::Normal,
which draws its label as given; it now passes the translated label. The
loose-ends test checks the button by its label.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A move changes no shape, but its preview copied the session, evaluated
the move and meshed the bodies again for every change of the values. While
the triad was dragged the part trailed the arrow by one of those
evaluations, and longer for a larger part. The preview now takes the
listed bodies' world meshes once and draws them moved by the move's
transform (about the world origin, as the Move feature turns bodies), the
original shown as removed and hidden as replaced; a copy keeps the
original. Anything it can't take (values that don't evaluate, a body not
shown, over 2 M triangles) goes to the scratch-design preview as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5020
* Insert SVG: refuse geometry scaled to infinity, and bound the profile grid (#5020)
A transform such as scale(1e308) turned a circle's radius into infinity.
The SVG reader now refuses non-finite transforms and geometry with a clear
error, and Grid::cells in the profile finder uses checked arithmetic, so an
infinite or huge box is checked against all shapes instead of wrapping the
cell count and allocating until memory runs out.
* Insert SVG: refuse lines with infinite ends; fix the grid test's cell count
A line whose transformed ends are infinite was dropped silently, because the
distance between them is NaN. It is now refused as out of range, like curves.
The new grid test expected one cell for a box spanning its own one-box grid;
such a box touches the 2 x 2 cells at its corners, so it expects 4.
* Ctrl+1…7 turn the view to the standard views (#5057)
Front, back, left, right, top, bottom and isometric, handled with the
other view keys beside Ctrl+8: animated like the view cube, reserved so
no command can take them, and ignored on the flat pattern page.
* Front … Isometric View are commands, Ctrl+1…7 their default keys (#5057)
The standard views become seven commands (view.front, view.back,
view.left, view.right, view.top, view.bottom, view.isometric) whose
default shortcuts are Ctrl+1…7, instead of keys the window handles
itself. They show in Keyboard Shortcuts, can be moved to other keys or
cleared, and the digits can be given to other commands. In the app they
turn the view as the view cube does; headless they set the session
camera, keeping target, distance and projection.
A design file keeps its evaluated model so that it opens without
evaluating the timeline. A feature whose boolean needed a retry records
it, and the kernel's BooleanDiagnostics leaves `rejected` out when it is
empty but has no default for it when read, so reading those records
failed ("saved model: diagnostics"), the saved model was refused, and
the design was evaluated on every open (17.6 s for the reporter's
17-feature design, 1.2 ms with this).
The reading side now takes an absent list as an empty one, without a
change to the kernel crate.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Open or close every Browser folder from the design or a component menu,
including folders that start closed. Display only: not saved, not an undo step.