2ff17c0fcb 3D mouse: follow the device that moves, not the first one found (#3988) (#4339)
* claim: #3988 (3D mouse: follow the device that moves, not the first one found)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: follow the device that moves, not the first one found (#3988)

On Windows and macOS the reader opened the first 3D-mouse interface it
could and read it until it failed. A 3Dconnexion Universal Receiver with
nothing paired opens fine, has a valid layout and never fails, so it kept
the reader for good. A SpaceMouse on a cable next to it was never read
("Not calibrated (hid 256f:c652)", every axis at zero).

The reader now opens every candidate and follows the one in use. The
first is followed from the start, as before. Another takes over once it
shows use (an axis off zero or a button down) while the followed one has
shown none for STALE_AFTER, so two devices moved together don't trade
the reading. A candidate that fails is dropped; if it was the followed
one the reading resets and the next is read. With one device the reader
behaves as before, down to the 100 ms read timeout. Several take 10 ms
turns, and reports queue in the system meanwhile.

The selection is `follow()`, written against a small `ReportSource`
trait, so it is tested with simulated devices on every platform: an idle
receiver next to a SpaceMouse, two devices in use at once, and devices
failing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3D mouse: a press that makes a device the one in use counts as a press

Since #3825 a HID device's first button report after it connects is its
baseline: a button down in it is held, not pressed. A device taking over
from another one was connected at that moment, so the press that took
over was swallowed. With an idle Universal Receiver found first, that is
the first button press on the SpaceMouse.

follow() now keeps the buttons each candidate last reported while another
was read, and the reader hands them to the reading as the baseline when
that candidate takes over. A device that reported no buttons before it
took over keeps the held-not-pressed rule.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:18:34 +00:00
2026-10-23 12:49:05 -04:00
2026-10-24 18:53:40 -04:00
2026-10-24 18:53:40 -04:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft 0.8: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 9× playback. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .solidcraft designs.
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
https://solidcraft.io Readme
501 MiB
0 Stars 1 Watchers 0 Forks
Languages
Rust 97%
Python 2%
WGSL 0.5%
JavaScript 0.3%
Shell 0.1%