Commit Graph
1009 Commits
Author SHA1 Message Date
amolinari-autotex 47285ccb88 Thread: right- and left-handed direction (#4414) (#4415)
* claim: #4414

* feat: persist right and left thread handedness (#4414)

* fix(thread): verify handedness with referenced holes and complete locales

* test: verify handedness with merged tapped thread catalogues

* test: retain tapped thread depth when changing handedness (#4414)

* test: restrict Unix symlink coverage to Unix targets

* test: inspect hole thread depth inside edit command parameters (#4414)

* test(doc): initialize cylinder radius in handedness fixture
2026-10-26 13:57:08 +00:00
amolinari-autotex 13cd45d1f1 Apply complete feature transactions off the window thread (#3133) (#3135)
* claim: #3133

* Apply complete feature transactions off the window thread

Evaluate dependent history and prepare reference and GPU display caches before accepting a guarded result. Preserve the evaluated original model for safe editor cancellation and journal only accepted commands.

* fix(ui): preserve original marker across sketch-to-feature edits

* test(ui): verify edit-sketch cleanup and guard Unix link fixture

* test(ui): fix texture disposal and unreachable assertion in feature tests

* fix(build): compile CLI link inspection only on Unix
2026-10-26 13:27:04 +00:00
Steven WatersandClaude Sonnet 5.5 2755c9ccfb Pin auto-generated body names (#6402) (#6403)
* Pin auto-generated body names

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Fixed body counter

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Fixed formatting

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Altered test behaviour to reflect new pinned body names

Co-authored-by: Claude <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-26 12:33:58 +00:00
SS-ENandClaude Opus 5.5 4ab6d92952 Agent chip: the batch step and its command, centred above the navigation bar (#5748)
While an agent's batch computes off the window thread (#1989), the chip reads
N/M · <command>. It is centred on the navigation bar, just above it, and moves up
past any toast or panel it would cover.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 12:28:30 +00:00
froglemonade2andClaude Opus 5.5 e063a7778e Axes and points from circular edges and round faces (#3128) (#4610)
* Axes and points from circular edges and round faces

In 3D, a round edge or face stands for its circle wherever a command
takes an axis or a point.

Revolve, Surface Revolve, both Circular Pattern dialogs, Plane at Angle
and Move -> Rotate take a circular edge (through its centre, along its
normal) or a cylinder, cone or torus face (its axis). The features keep
the pick as a model reference, so they follow the model when a parameter
moves it. Straight edges work as before; flat faces are refused.

Every 3D point input takes a circle's centre: construction points (which
follow the circle), To Object, patch points, hole placement, and Move's
pivot and points. Hovering shows the axis as a dashed construction line
or the centre as a star, and the dialog's chip names what the pick
stands for ("centre of edge 10", "axis of face 3").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Format the round-pick hover check

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Selection chips: name a round pick as a circle centre or axis

The chip has room for little more than the body and a word or two:
"Shaft · circle centre", "Shaft · circle axis", "Shaft · face 2 axis",
and "Shaft · point" for a point of the model.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move: a circle's centre in a placed component is where the component shows it

Move's pivot and points read a picked circle from the model in its
component's own frame, while the pick is in the world. They now read it
from the world state (and, editing a Move, from the state before it,
placed the same way), as the viewport and the other round picks do.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Plane at Angle on a planar face about a model edge: test that it follows both

Upstream #1956 made a planar face a base for Plane at Angle; this branch makes a model edge an
axis. The rebase keeps both in one PlaneRef::AtAngle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 12:27:32 +00:00
Karl Von RichterandClaude Opus 5.5 44b0056d48 Frames: a Weldments ribbon tab (#4003) (#5262)
* Frames: a Weldments ribbon tab (#4003)

- WELDMENTS joins the ribbon after SHEET METAL and is built the same way:
  Sketch (New Sketch), Create (Frame Member) and Configure (Parameters,
  Configurations). Frame Member's home moves there from MODEL > Create.
- Always shown, as a frame starts from a sketch of its lines. It selects
  itself and takes the contextual style when the selected body (or the last
  body of the active component) is a frame member; sheet metal comes first.
- It uses the default accent until the palette has a colour for it.
- The tab label is in every catalog; docs/ribbon-layout.md, docs/frames.md
  and the tab list in docs/control-protocol.md follow.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Frames: Weldments keeps the ordinary tab look (#4003)

Weldments still selects itself when a frame member is the active body, but
no longer takes the solid contextual fill or the 2 px accent line under the
tab row: selected, it looks like a selected Model tab. Only Sketch and Sheet
Metal (on a sheet body) are contextual.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 12:24:38 +00:00
semmelrindeandClaude Opus 5.5 4d06daf87b Patterns: one before the feature it copies follows that feature's parameters (#6726) (#6727)
* Patterns: one before the feature it copies follows that feature's parameters (#6726)

A pattern or mirror of features made with the timeline rolled back comes
before its sources and replays them from their definitions. Its
fingerprint chained only the features before it and its own inputs, so a
change of a source's parameter left its result in place: the box grew,
its copy kept the old length, also after rolling forward.

The chain fingerprint of a pattern or mirror of features now also takes
the fingerprint of each feature it replays (and of their sources, for a
pattern of a pattern), wherever they are in the timeline.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Patterns: a test for a later feature taking a deleted source's name (#6726)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Patterns: fingerprint the replayed sources with the document, as fingerprint now takes it (#6726)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 12:01:58 +00:00
Jan SzumiecandClaude Opus 5.5 00ff63f75e Face pick by point: linear work budget, so bodies with many faces take a sketch (#6720) (#6721)
* claim: #6720

* Face pick by point: linear work budget, so bodies with many faces take a sketch (#6720)

A face picked by its point alone charged the whole mesh once per face, and
face_contains scanned every triangle for each candidate. A block with a
modelled thread (about 5 000 faces) went past the 2 000 000 limit. The
triangles are grouped by face once, each face's test reads only its own,
and the budget charges triangles + faces.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:16:17 +00:00
leValdemar19andClaude Opus 5.5 82cd5cc52e Sketch Dimension: value box in the document's units (#3812) (#3878)
* claim: #3812

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Dimension: value box in the design's units (#3812)

A dimension added without a value restated what it measured as
"<value> mm", whatever the design's units. In an inch design the
Dimension tool's value box therefore opened at "25.4 mm" next to a
dimension whose text read 1.000 (inches).

Document::design_length writes a measured length in the design's units
("1 in"), with enough decimals to keep it to the micrometre, so a
dimension that restates the geometry still moves nothing. The Dimension
tool, AutoConstrain's dimensions and Toggle Driven (making a driven
dimension driving) use it. Millimetre designs are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Move the design-units dimension tests into sketch_ux_tests (review)

The #3812 tests go in the existing sketch dimension test file rather than
a new file of their own (AGENTS.md, #3226).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:16:12 +00:00
Colin Faulkingham 7d7016b356 Insert Design: preserve source part properties (#6624) (#6691)
* claim: #6624

* Preserve source metadata when inserting a design (#6624)
2026-10-26 11:16:07 +00:00
Colin Faulkingham cd66495e14 Preserve plastic rules and hidden bodies through renames (#4421) (#4425)
* claim: #4421

* Fix body metadata and visibility across renames (#4421)
2026-10-26 11:15:31 +00:00
Colin Faulkingham 484f0cf8ae Sketch: keep nested circles ordered when diameters change (#6764) (#6789)
* claim: #6764

* fix(sketch): preserve nested-circle order during dimension edits (#6764)
2026-10-26 11:14:59 +00:00
Homero Thompson bd38bc40be Sketch: the Midpoint Line tool shows the length and angle while drawing (#6198) (#6401)
* claim: #6198

* Sketch: show the Length/Angle readout while drawing a Midpoint Line (#6198)
2026-10-26 11:14:22 +00:00
FrankandClaude Opus 5.5 19c8eb846e Crash reports: keep journaling through file.new and doc.open (#6550) (#6551)
* claim: #6550

* Crash reports: keep journaling through file.new and doc.open (#6550)

`Session::replace_design` swapped in the fresh session without its
`crash_journal` flag, and the app turns it back on only at its next frame.
So `file.new`/`doc.open` never recorded how they ended, the commands sent
after them in the same frame (a control-channel or MCP batch) were not
journaled, and a crash report then named `file.new` as the command in
flight. `replace_design` now keeps the flag, like the other session-wide
fields it keeps; only the design on screen has it set.

Test: `commands_right_after_a_new_design_are_journaled` (crash_tests.rs).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:14:20 +00:00
Homero Thompson b2525ed34e Tests: the six timing assertions do not depend on the wall clock (#6917) (#6925)
* claim: #6917

* Tests: the six timing assertions do not depend on the wall clock (#6917)

Six tests asserted on the wall clock. Their result depended on how loaded
the machine was and not only on the code under test: they passed on an idle
machine and failed when the test binaries ran beside each other, which is how
the suite runs (`cargo xtask test` starts every test binary at once).

CONTRIBUTING.md:196 says it: "Tests run beside each other on a busy machine,
so a test must not depend on wall-clock timing."

The change is confined to the six test files the issue names:

- geom: the tangent chain of a helix is a ratio (750 pieces against 3 000)
  instead of a limit of 200 ms.
- io: the placement budget is spent inside the reader, so the clock is gone.
- ui-egui: the classification of many faces is a ratio (900 against 3 600)
  instead of a limit of 10 s.
- engine: the clearance measurement drops its 30 s limit; the boolean that
  gives up reports itself.
- engine: the fillet beside a modelled thread is a ratio (a 1 mm thread
  against an 8 mm one) instead of a limit of 30 s.
- ui-egui: the window frame budget goes from 250 ms to 20 s, the limit #6072
  gave its own probe.

The helper is the one #649 wrote, copied into the crates that need it, with
the noise of a run as a parameter.
2026-10-26 11:14:11 +00:00
Homero Thompson 72a76edcf7 Shortcuts: Ctrl+Shift+S opens Save As in the workspace (#6558) (#6567)
* claim: #6558

* Shortcuts: Ctrl+Shift+S opens Save As in the workspace (#6558)

The Home page already opened Save As with Ctrl+Shift+S, but the design workspace matched Ctrl+S, so the chord saved over the current file instead of offering another one. The workspace now routes the chord to Save As, and the File menu shows that shortcut next to Save As, taken from the command registry.
2026-10-26 11:14:07 +00:00
HiroKenEzandClaude Opus 5.5 0d32821e9e Top-level cut and join reach bodies in sub-components (#5679) (#6246)
* claim: #5679

* Top-level cut and join reach bodies in sub-components (#5679)

An extrude, revolve or press-pull from a sketch on a face of a body in a
component inside the active one now cuts or joins that body, moved or
turned, in its own component, so every placement shows the change. The
automatic operation probes that body where it is shown. A linked part, or
a face on a further placement of a part placed more than once, is refused
with the reason instead of a silent no-op (#5678).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:13:45 +00:00
Homero Thompson d9c5e4c325 Sketch: a circle drawn at the origin can be moved (#5034) (#6462)
* claim: #5034

* Sketch: a circle centred on the origin can be moved (#5034)

* test(#5034): say what the assertion really checks
2026-10-26 11:13:14 +00:00
Homero Thompson 12fe17d1b7 Modeling: a copied body keeps the appearance of its original (#6423) (#6456)
* claim: #6423

* test: a copied body must keep the look of the body it came from

solid.move with copy: true leaves the copy without the appearance, the
material or the face looks of the source body, so it renders with the
default look. The tests fail for that reason: the copy has no entry in
appearances.bodies, in materials or in appearances.faces.

* fix: a copied body keeps the look of the body it came from (#6423)

A move with `copy: true` pushed a new body but left it with the default look, so the copy came out a different colour than the part it came from. The copy now carries the body's appearance and its material, as the component copy already did.

* test: keep the copy regression to the body look and the material (#6423)

* test: each copied body keeps the look and the material of its own source (#6423)

Two bodies with different appearances and different materials, copied in one solid.move: each copy must keep the look and the material of the body it came from.

Scope of the fix: the look of the BODY and its material are carried over to the copy. The per-face looks are NOT carried over: a face look is keyed by the point on the face, so the copy's faces would have to be matched and their points translated, which is a separate feature.
2026-10-26 11:12:50 +00:00
semmelrindeandClaude Opus 5.5 cf7fbeaba1 Sketch drag: a scripted drag solves the steps past a failed one at once (#6606) (#6607)
A drag that isn't live walks to the cursor in steps, each a held solve
on its own budget seeded on the last solved state. Past a failed step
the walk keeps trying every step (a stretch the geometry can't follow
can be followed by one it can), and each failing solve runs the
numerical solver to its limit: one drag in a 65-command sketch took
7.7-9 s, most of it in failing solves.

A failed step leaves the sketch as it was, so the steps after it all
start from the same state and none changes what the next one sees.
They are now solved eight at once on all cores; those that fail in a
row are taken as tried and the walk goes on at the first that doesn't,
as it would one by one. The drag above takes 3.7-4.3 s and every
command's reply is unchanged. Live frames, whose steps share one
frame's budget, are left as they are.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:12:40 +00:00
semmelrindeandClaude Opus 5.5 e2c9f908f8 Sketch: an offset slot can still be moved by the dimension that places it (#6569) (#6697)
* claim: #6569

* Sketch: an offset slot can still be moved by the dimension that places it (#6569)

An offset arc is drawn round its source's own centre, and its ends are
held while the sketch solves (the offset is rebuilt from its source
afterwards). Its arc condition, both ends as far from the centre, then
only tied that shared centre, and the source arc with it, to the middle
of the held ends: a slot offset by 1 mm lost a degree of freedom, and
the length that places it was refused as conflicting.

The solver and the constructive reading now leave out the arc condition
of an offset arc round its source's centre (Sketch::offset_arc_follows_source),
as #4466 did for the Parallel between an offset line and its source. The
source's own arc keeps the centre; nothing changes without an offset.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a test for a rounded rectangle with an offset round it (#6569)

kaievns's case from the review: the offset's corner arcs tied each corner
centre to a 45 degree line, so the height followed the width and every
width change was refused.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:12:15 +00:00
NOWN-DEVandClaude Opus 5.5 fa961eaa31 Sheet metal: a pattern of a cut made in the flat is kept like the cut (#6841) (#6853)
* claim: #6841

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sheet metal: a pattern of a cut made in the flat is kept like the cut (#6841)

A rectangular, circular or path pattern of an extrude cut through sheet metal was refused
("this sheet machining cannot be preserved in its flat material"), though the cut itself is
kept as a cut-out of the flat pattern. The pattern replayed its copies through the generic
boolean, whose sheet check refuses any change the sheet model can't keep; the cut goes through
the sheet's flat machining first.

Each copy of an untapered extrude cut is now machined into the sheets the same way, in its
moved sketch plane (a moved copy keeps the extrude's prism certificate), and then cut from the
other targets. A copy that meets a folded bend is refused as the cut is there. Mirrored copies
(the sketch plane turns over) and patterns of an intersect (which cut with the union of their
copies) keep the generic path.

Fixes #6841.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:12:12 +00:00
aa88360357 Sketch: deleting part of a projected link no longer brings it back (#5098) (#6324)
* claim: #5098

* Sketch: deleting part of a link breaks off the rest instead of rebuilding it (#5098)

Deleting some of a link's curves left the rest linked. The next refresh saw a
different layout and rebuilt the whole link as normal geometry: the deleted
curve came back and the others lost their construction flag (a projected arc
returning as a solid arc, a projected face's lines turning solid).

sketch.delete now breaks the link for what remains, as Break Link does: those
curves stay where they are and keep their flags. Deleting a whole link, and
text links, are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

* Move the #5098 tests up in sketch_project_tests.rs

They sat at the end of the file, where main has since added other
tests; moving them next to the break-link test avoids the merge conflict.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:11:19 +00:00
e1ff3fa9c0 Batch: refuse a step that would fail at its turn before the first step runs (#5853) (#6781)
* claim: #5853

* Batch: refuse a step that would fail at its turn before the first step runs (#5853)

engine.batch and the MCP batch tool checked only a batch's shape up
front. A misspelled command id in a late step was found at its turn,
after every earlier step had run, and then all of it was rolled back: a
160-step batch with a typo as its last step ran for a minute and
changed nothing.

solidcraft_engine::batch_preflight::check finds, before anything runs,
the first step the batch would certainly refuse at its turn: a step
without a command, an unknown command id (the error names the closest
ids, as at the step's turn) or, with strict parameter checking, a call
that breaks its command's typed contract. Anything that depends on the
design is left to the step's turn.

- engine.batch (control channel) checks against the app's registry and
  its session's level; view.pick, which the app answers itself, passes.
- The MCP batch tool checks when the commands run in its own process
  (headless, with --param-check from the backend). A running app may be
  another version with other commands and checks the batch itself; its
  reply's not_run is passed on.
- The refusal is the failing step's reply with completed 0, undone 0,
  not_run listing every step and a note.

Tests that used an unknown command only to make a late step fail now
use a step that fails at its turn (a bad extrude distance), so they
still test rollback, timings and file.new as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq

---------

Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:11:10 +00:00
yhamil04andClaude Opus 5.5 3afcd69a5c Joints: a loop whose axes are a hair out of parallel still moves (#6211) (#6602)
* claim: #6211

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Joints: a loop whose axes are a hair out of parallel still moves (#6211)

Holes picked on parts are rarely exactly in line. A closed loop through
axes a few hundredths of a microradian apart (a lever, link and a rod on
a cylindrical axle) can't close exactly: it closes to nanometres, and the
gap grows as it turns. The loop solver wanted 1e-7 mm, so it threw such a
closure away (the loop stayed open, its parts at 0 dof) or stopped a drive
or drag after a fraction of a degree.

The conflict check is now 1e-4 mm / 1e-6 rad (it was below what its
message can show), and joint.drive / motion and joint.reach close the
loop at each step as at the start: to the tight tolerance where they get
there, otherwise within the conflict check.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:10:45 +00:00
yhamil04andClaude Opus 5.5 a3483ed451 Body rename: an imported assembly's other bodies keep their names and components (#2175) (#6615)
* claim: #2175

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Body rename: an imported assembly's other bodies keep their names and components (#2175)

An Import keeps its body names by the file's body index, and builds no body for the
file's later instances of a repeated part (`skip`). Renaming a body stored the names by
the body's place in the model instead, so every name after the first skipped instance
landed one slot early (and the new name could land on a skipped slot). The rename looked
right until the design was rebuilt; then those bodies took other names, dropped out of
their components and showed up loose in the import's top component.

`Feature::body_name_slots` maps the bodies a feature builds to their stored slots, and
`Feature::pin_body_names` stores current names through it. The rename, the pinning of
later features' names (rename and suppress) and `Document::body_rename_from` use them.

Fixes #2175

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:10:39 +00:00
yhamil04andClaude Opus 5.5 d7252f2240 Sketch: constrain to an edge of any body, a mirrored copy too (#6348) (#6617)
* claim: #6348

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: constrain to an edge of any body, a mirrored copy too (#6348)

A constraint tool ignored a click on a body edge, so only edges already in
the sketch (the face it sits on) could be constrained to; a mirrored copy's
edges never were. Constraint commands now take a model edge or vertex
({edge|vertex: [x,y,z], body?}) for an operand and project it first, in the
same undo step, and the pick tools pass a clicked edge or vertex that way.
The link keeps the edge's persistent name, so the constraint follows rebuilds.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 11:10:35 +00:00
Mateusz SychandMateuszSychXpl d895fef354 Control channel: a pushed design.changed event for clients that subscribe (#6985) (#6986)
* claim: #6646

* Control channel: document.revision, a design revision and a document id (#6646)

A program that follows the open design asks document.revision and exports
only when the answer moves: document_id names the open design (kept through
edits, saves and renames, another for each design started or opened, never
shared between two tabs or two runs) and revision moves whenever the design,
what is hidden or an uncaptured component position changes. It stays put on
reads, selections and view changes, unlike the session's view revision.

The revision is read lazily: the session remembers the design it last
reported (held weakly, so Arc::make_mut can never change it in place and its
address can't be reused) and takes a new number from one counter for the
whole run when the design is another one. The control method answers at once,
also while a slow command computes; engine.execute reaches the same command
for scripts and MCP.

* document.revision: hash the run's id prefix with the process's random keys

A clock set before 1970 gave every run the prefix 0, so a restarted app could
answer a new design with the id and revision of the old one. The docs no
longer promise an answer at once: a screenshot waiting for an opened design to
be meshed still holds the requests behind it.

* document.revision: its label in the complete catalogs (ja, zh)

* claim: #6985

* Control channel: control.subscribe and design.changed events (#6985)

A connection that sends control.subscribe gets the active design's id and
revision in the reply (as document.revision answers), then a
{"event":"design.changed","params":{document_id, revision}} line whenever
either changes, so a live link need not poll.

The window publishes the design at the end of each frame's logic and
drawing while a connection is subscribed (one atomic load otherwise). Each
subscribed connection waits on that from a thread of its own and writes
the latest after a 100 ms gap, so a burst of changes is one line. Replies
and events share one lock per connection, each written whole (#6390).

* control.subscribe: the reply before any event, a second one refused

The events thread started before the subscribe reply was written, so a
change right after the window's answer could reach the client before the
reply that named the older revision. The subscription now starts holding
the connection's line lock and writes the reply under it.

A second control.subscribe on a subscribed connection is refused on the
connection itself: its answer could arrive behind a newer event. When no
thread or socket is left for the events, the reply says it did not
subscribe instead of ok.

* control.subscribe: a second one does not lose a finished late reply

The already-subscribed answer came before the busy check, so a request that timed out and had finished since lost its reply: control.pending then said the app ended it without one. It now comes after the busy check and drops a finished late reply as every other request does.

* control_server: declare the subscribe guard at the top of the loop

Clear of the lines #6643 changes (its token check moves to where the declaration was).

* control_server: the subscription's items beside serve

Away from the lines next to send, where #6643 adds token_of.

* control test: New on a blank design reuses its tab, so redo the box first

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-10-26 11:10:03 +00:00
Dahak BuildsandDahak Builds 070b1414ee Fix manual vertical/horizontal constraints with circle centre (#617) (#6928)
* claim: #617

* fix(sketch): manual Horizontal/Vertical between a circle centre and an edge (#617)

The manual H/V tool silently did nothing when a point and a straight line
were picked or selected together (only two points or a lone line worked),
while auto-constrain inference applied the alignment. A point picked or
selected with a straight line now aligns the point with the line's
midpoint, in the mode the line's dominant axis suggests, through the
existing midpoint alignment in sketch.constraint.horizontal_vertical.

- tools: constraint_preselection consumes [point, line] selections; the
  interactive tool applies the alignment on the second pick (a line).
- context menu: Horizontal/Vertical Constraint items for point + line.
- engine + ui regression tests pin centre-edge alignment and the
  edge-to-centre dimension from #617.

Written by Qwen.

* style: formatting cleanup for #617 files

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 11:09:52 +00:00
111c662fe4 Extend: join a stop that is already another curve's end (#6863) (#6865)
* Extend: join a stop that is already another curve's end

sketch.extend refused a target that coincided with another curve's end
("the extension target coincides with existing geometry") instead of
extending onto that point. The stop is now joined: a new line ends on the
existing point, and a free end grows onto it held by a Coincident. The
preview shows that stop too, so the line it draws is the line the click adds.

A stop at the end of a spline or conic joins that end the same way, and
extending an infinite line now refuses instead of moving one of its two
points.

🤖 Generated with Codebuff
Co-Authored-By: Codebuff <noreply@codebuff.com>

* Extend: close an arc, take an equal stop, preview with the command's search

An arc with nothing on its path now grows all the way to its own far end and
closes into a whole circle instead of reporting that there is nothing to
extend to.

Two curves stopping the extension equally far are both on the way, so the first
stop is taken instead of refusing to choose between them.

The line preview and the command now share one stop search (`line_aim`), so the
preview can no longer draw a line the click refuses.

---------

Co-authored-by: n0tfr3shm1lk <n0tfr3shm1lk@ukr.net>
Co-authored-by: Codebuff <noreply@codebuff.com>
2026-10-26 11:09:42 +00:00
Dahak BuildsandDahak Builds ab709e6c46 Add base-height and new-body options to Snap Fit (#1994) (#6911)
* claim: #1994

* plastic.snap_fit: base_height and new_body options (#1994)

Base Height extends the snap fit's base below the picked face; New Body
makes the snap fit its own body so it can be patterned or moved. Both
optional, serde-defaulted, old designs replay identically.

* ui: snap_fit length-field defaults list gains the optional base height

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 11:09:30 +00:00
Colin Faulkingham 03bf992bc1 Keep linked components valid through Undo after Save As (#6860) (#6877)
* claim: #6860

* fix: preserve linked component targets across Save As history (#6860)
2026-10-26 11:08:32 +00:00
raykholo 189b47c750 Chamfer and Fillet refuse a point where several edges meet (#5173) (#5177) 2026-10-26 10:42:59 +00:00
Kai Evans 41a938e731 Sketch: a fillet stays the arc of its corner when the corner mirrors or a line is dragged through it (#5677)
A line tangent to an arc at the arc's end had no sense: the tangency held
with the line on either side of its touch point, so pinning a line's far
end across the corner left the line cutting back through its fillet, and
when the solver found the mirrored corner the arc kept its stored
direction and became its three-quarter complement, inside out.

The solver now keeps each fillet an arc of its corner. A line tangent at an
arc's end keeps its sense there (it leaves the arc as it did) and the arc
its side of its chord, compared with the positions before an interactive
move or the stored ones. A corner that mirrored gets its arc on the
mirrored side: its ends swapped where the solve ran the arc round the
other way with the lines following, or the arc reflected across the line
that stayed and solved again where a line cut back through. A solve that
would loop the arc the other way round, or fold a line onto it, is refused
as a fold is. A drag's cursor-following steps keep the fillets too, so a
line dragged through its own fillet stops at the arc.
2026-10-26 10:42:41 +00:00
semmelrindeandClaude Opus 5.5 613903229e Patterns: copies of a To Object extrude follow the face it reaches (#2121) (#6093)
A feature's face points are moved onto their named faces before it is
evaluated, so a To Object extrude follows its target face when an earlier
feature moves it. A pattern's or mirror's copies were built from the
feature as stored, with the face where it was picked: after a gear's disc
was made thicker, the tooth reached the new top but its pattern copies
kept the old height. The copies now use the same moved points; the move
is one helper used in both places.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:28 +00:00
Jesper We 8a28d13161 Perspective view as a command, so a 3D mouse button can switch it (#6143)
* claim: Perspective view as a command

* Perspective view as a command, so a 3D mouse button can switch it
2026-10-26 10:42:18 +00:00
NOWN-DEVandClaude Opus 5.5 74321f8bbd Sketch Intersect: crossings on curved faces lie on the surface; a plane on a top face cuts it (#6272)
* Test: sketch Intersect keeps its exact cuts, crosses curved faces on the surface, cuts on a top face

Intersect's cut of a box, a cylinder, a sphere and a tilted cylinder, as it is on main, pinned.
Two cases where it is not exact: a plane through a cylinder's rim cuts the mesh's chord (its sides
come out at 6.3159 and 6.3085, not the square root of 40; a hole's walls at 25.0122), and a plane
on a body's top face finds nothing ("projects to nothing on this sketch plane").

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

* Sketch Intersect: crossings on curved faces lie on the surface; a plane on a top face cuts it

Problem: the plane cut that sketch Intersect makes of a body's mesh (project::section) took a
crossing on an edge where a curved face meets another (a cylinder's rim on its cap) from the
merged normals, which are undefined at the crease, so it fell on the chord: a cylinder's sides came
out 0.01 mm off and uneven. A plane through a vertex or on a face counted the vertices on it as
below, so a plane on a body's top face crossed no edge and found nothing.

Solution: the crossings are found by section_segments, which section fits as before: an edge where
a curved face meets another takes the curved face's normals, so the crossing lies on its surface;
a vertex within 1e-9 x the mesh's size of the plane is on it, on one side for every edge (below
when the mesh lies on or above the plane, else above), and an edge ending there crosses at that
vertex, which is an exact point for the fit. Each segment keeps its B-rep face, for a section that
groups them by face. Cuts that were exact are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 10:42:08 +00:00
Homero Thompson 4ced1d7bcf Viewport: the grid fades with the distance instead of cutting off (#4214) (#4629)
* claim: #4214

* Viewport: the grid fades with the distance instead of cutting off (#4214)

The ground grid stopped at a fixed distance from the view, so its edge showed
as a cut across the picture. It now fades out with the distance from the
middle of the view, and it is gone before either of the two lines that used to
cut it: its own edge, and the picture's far plane.

Each grid line is drawn in pieces, and each piece is as faint as the fade
makes it at the distance where it lies. The 'under' batch is drawn by the
overlay pipeline with alpha blending, so the colour's alpha reaches the
frame.

* The headless grid fades with the distance too (#4214)

The headless path (solidcraft-cli snapshot, the home-page thumbnail, the MCP
screenshot) drew the grid from the engine's palette, where a line had no
alpha: the grid still ended in a cut, and at a low camera angle the cut was
in the picture.

A SceneLine now carries an alpha, the CPU rasterizer blends with it and the
GPU capture passes it on, so the engine's grid can fade. The fade itself
moves to the engine, next to the grid's other geometry, and both paths use
it: the headless grid now reaches as far on the ground as the view is wide
(the ground stretches as it is seen at a slant) and dissolves into the
distance instead of ending in a line.

* Fix the headless/viewport grid fade divergence (#4214)

The engine stretched the grid's size with the slant of the plane it is seen at, the viewport stretched it only on the ground, so on a sketch's plane the picture's grid reached further than the window's (153.42 mm against 120.00 mm). Both now share one grid_ext, which the picture and the window draw the same grid from.

* The grid fades out before the picture's far plane cuts the ground (#4214)

The window's grid faded against a far plane of its own: the scene's radius
clipped by the projection's camera (260 mm away at 400 mm of distance), while
the picture itself cuts the ground at the far plane of its own projection
(223.7 mm at the same distance, because the projection frames the scene's
bounds and not its radius). The grid was still a third of its strength where
the picture cut the ground, so the cut showed as a straight line across the
view.

The fade now ends at the far plane the picture's projection uses, and the
grid is gone before that plane cuts the ground.

The test that watched the fade now measures the ink of each row of the
picture, and checks that the grid is already gone in the ten rows above the
row where the far plane cuts the ground: the point it compared before lay
beyond that plane, where both renders draw nothing at all, so the comparison
was always true.
2026-10-26 07:59:56 +00:00
raykholo c8314687fc Construction points and axes: Browser rows, and pickable in the view and dialogs (#4312) (#4320) 2026-10-26 04:50:46 +00:00
raykholo 878339cac8 Sketch patterns: count, spacing, and angle follow parameters (#5231) (#5332) 2026-10-26 04:31:55 +00:00
bherbruckandClaude Opus 5.5 348bbc1dfa fix(joints): edge and corner picks follow the part when it changes (#6942)
The Joint dialog kept a round edge (a hole's rim), a straight edge and a
corner as plain points where they were picked. When the part got thicker,
a hole moved or the part got longer, the origin stayed where it was and
the jointed part overlapped the other one. An edit that left the picked
spot where it was (lengthening an arm away from the jointed hole) looked
fine, which hid it. Faces and hole walls were already found by name.

The dialog now sends a round edge as its circle's centre with its z, and a
straight edge or corner as an edge pick with its z. The engine keeps them
by name (the round end by its wall and the face across its rim, the edge
and corner by their edge and face names), with the frame the pick showed;
where it can't (no planar face beside the edge, no names), it keeps the
point as before. Edge origins get an optional axis (along the edge, or a
fixed direction) so a hinge on an edge keeps turning about it.

Tests: every joint type and as-built, for each way the dialog picks an
origin, with the arm made thicker, its hole moved and the arm lengthened,
inside one design and through Update Links.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 04:05:26 +00:00
262f5c61c0 Move, Align and previews on placed components (#4455)
* Move and Align on placed components: picks and vectors where they are shown

A body in a component placed away from its own frame (an imported part
set upright) moved the wrong way: Move's vector, axis and pivot were
taken in the root's frame, so moving the upright plate up moved it along
its own frame's z. They now turn with the frame of the bodies moved.

Align mapped each pick into the frame of the body under it, so aligning
two separately placed parts mixed two frames (the plate landed at right
angles), and its snap points were never mapped at all. Align now finds
its picks, face normals and snaps where the view shows them and takes
both ends into the moved bodies' frame.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preview: a feature's tool is drawn where its component is shown

Extrude, revolve and the primitives preview their tool on its own. That
preview was built in the model's frame, so on a component placed away
from it (an imported part set upright, edited with its component
active) the tool showed at right angles to the picked face, though the
feature itself came out right.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Follow main's lazy body frames and first-part grounding in the placed-component work

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 03:28:14 +00:00
816bcf10de Every new command comes with input and output schemas (#2829) (#4035)
* Every new command comes with input and output schemas

A test fails for a command without a contract or an output type, unless it is a planned!
placeholder or listed in schema/unconverted.txt, which holds the 400 commands that predate
the rule and only shrinks: the test also fails when a listed command has its schemas, when
the list names a command that doesn't exist, or when it isn't sorted.

`checked!` now takes only the command's id and checks the contract that id publishes
(`run_checked_as`), so the contract enforced is always the one described. Another test runs
every command that has a contract in strict with an unknown key, so a contract is never
published without `checked!`, under the command's own id, enforcing it.

A new book page, Command schemas, explains how to write a contract and a reply type, the
tests to add, the shared field types and how to add one, with a checklist; the failure
messages point to it. "Adding a command", CONTRIBUTING.md and AGENTS.md now include the
schemas, and the MCP tool description and docs/mcp.md no longer list the converted commands.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* List the commands added on main since: view.layout, view.history_layout, view.normal_to

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Command schemas guide: what participants and targets do, checking the evaluation, warning-free replies

- `participants` changes the result for some features and nothing for others; where it and
  another key override each other, or where it has no effect, say so in that key's
  description or in the summary.
- The example primitive's `targets` default to every body in the feature's component, not the
  bodies it meets; they're ignored when `participants` lists bodies.
- Check what each value does where the feature is evaluated, not only how the handler reads it.
- A reply test runs every form in Warn and checks for no `param_warnings` (Strict for a reply
  that isn't an object).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* List the 43 commands added on main since: frame, component, render and others

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* List the 11 commands added on main since: browser folding, standard views, parameter sweep, path flange

browser.collapse_all, browser.expand_all, inspect.parameter_sweep, sheet.path_flange and the
seven view.* standard views (back, bottom, front, isometric, left, right, top) landed on main
without schemas; the gate flags them, as intended. 457 commands listed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Schema rule warns instead of failing for now

A command without input and output schemas prints a warning listing it
(test output and a CI annotation). SCHEMA_RULE_STRICT in coverage_tests.rs
(or SOLIDCRAFT_SCHEMA_RULE_STRICT=1) makes it fail again. Docs say "should,
and will become required".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 01:43:02 +00:00
leValdemar19andClaude Opus 5.5 b94692497e Sketch Dimension: arc length from an arc and its end point (#754) (#4245)
* claim: #754

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Dimension: arc length from an arc and its end point (#754)

The arc-length dimension existed (sketch.dimension type arc_length) but
the Dimension tool could only give an arc its radius. An arc and one of
its own end points, in either order, now dimension the arc's length:
click the arc, then its end. The pair was refused before ("cannot
dimension that combination"), so no existing result changes. A point
where the arc's end is (a coincident line end) counts as that end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 22:17:01 +00:00
ChrisNo a3890b3bd5 Open a linked part from its assembly Browser row (#2348) (#2349)
* claim: #2348

* Open linked designs from assembly browser

* claim: #2348

* Test linked design action with multiple components selected

* Fix linked design lookup in browser storage and translate its menu action

* Add Turn Up Axis to complete UI catalogs

* Keep browser DXF download after linked-design checks
2026-10-25 21:15:48 +00:00
59cad5f0bb Colored components (feature request #2507) (#2877)
* feat: add colored components inspection toggle

* feat: persist component colors and add cycling controls

* feat: assign component colors in creation order

* fix: update component color menu integration and translations

* fix: proper description for pending format change.

* fix: deleted duplicated format change description from docs/pending.

* Compare the component colour counter in the features-only check

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Vadim Kalinsky <vadim@kalinsky.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:11:03 +00:00
DuBearteandClaude Opus 5.5 0752d8d79c Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543) (#5789)
* claim: #5543

* Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543)

A circle drawn twice at one place is two profiles of one region. Extruded
together they were two coincident tools: a cut through a 121-hole grid with
four such circles retried the boolean with the tool nudged (four times) and
took 25 s instead of 0.5 s.

merge_regions, which every extrude, revolve and surface feature runs on the
regions it builds from, now leaves out a region whose boundary repeats an
earlier one (within 1e-7 of its size; corners and segment middles on the
other loop both ways, holes alike). The selection itself keeps its
multiplicities, as profile_refs' tests require.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:10:02 +00:00
raykholo 0344a41dc4 Open and insert a DXF outside a sketch (#2052) (#4635) 2026-10-25 21:03:31 +00:00
dba8108369 Timeline: a reorder evaluates the design once, from the cache it already has (#6186) (#6187)
* claim: #6186

* Timeline: a reorder evaluates the design once, from the cache it already has (#6186)

timeline.reorder checked the move on a copy of the model, then dropped it,
so setting the reordered design evaluated the moved part of the timeline
again; reorder_many (and moving features into a group) checked on an empty
model, recomputing the whole design even for a move near the end. The
check now starts from the session's own model, and the session keeps the
model it was checked on.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Marker is Copy: drop the clone

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:55:52 +00:00
f512d4a004 Move: placements of one part moved together each go the way asked (#4768) (#4849)
* Move: placements of one part moved together each go the way asked (#4768)

A part placed more than once (an imported assembly's corners, screws or
fan blades) is one body in its component. Moving several of its
placements together moved that body once per placement listed, each
placement turning the move its own way, so the copies flew apart.

When solid.move names one part through two or more placements, it now
moves those placements in the world, as occurrence.move does with space
world: a placement held by a rigid group (an imported assembly) moves with
the outermost placement holding it, one inside another being moved isn't
moved again, and root-component bodies listed are moved as bodies, all in
one undo step. Other moves are unchanged, and so is a move with copy.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Free the grounded first part before the placement-move tests move it

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-25 20:28:06 +00:00