* claim: #7861
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch dimensions in a colour of their own in every theme (#7861)
Dimension lines, arrows and values were drawn in the same near-black or
near-white as fully constrained sketch curves, so they were hard to tell
apart in a busy sketch. Every theme now sets its own dimension colours:
plum on Light, orchid on Dark, and a hue from each built-in theme's own
palette. Colour vision tests measure them against the curves, the
construction lines and the conflict red, and a new test holds every
shipped theme to readable, distinct dimension colours.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: show center and midpoint alignment guides
Add transient per-viewport horizontal and vertical guides with a sketch preference. Related tests, native UI, WASM and supplementary Linux checks pass. Full CI remains blocked by unchanged Windows engine dead-code Clippy errors.
* Sketch: complete alignment-guide translations
* Tests: compile chosen-program mutex only on Unix
* Links: update linked designs that changed while the assembly's tab was away
A design coming back to its tab compares the modification time and size of its linked
design files with what they were when it went to the background, and runs Update Links
on the worker thread for those that changed: saved in another tab, another window or by
a checkout. Preference update_changed_links (Design, Linked designs) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the assembly guide says linked designs update when their tab returns
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: Vietnamese strings, now that vi is a complete catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: remember what each design last read, so an update that fails is tried again
A design's linked files are now recorded as the design last read them: when Update Links reads a
link without an error, or when the link is first seen. Coming back to the tab reads again what
differs, one link per run, so a file that cannot be read holds up no other and is tried again
the next time, and a part changed while the assembly was shown is taken up on its next return.
Closing several tabs together reads nothing on the way, and the web build, which keeps no file
times, looks at nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: no read during a save-changes prompt, records for adopted designs and missing files
A tab shown to answer "save changes?" reads no link before its save, and Cancel there or on a
batch lets the tab left in front read what it skipped. A design opened in place of the blank one
records its links at once, a link whose file is missing is recorded as missing so it is read when
the file comes back, and a read queued for a design that is no longer shown by the time it starts
is dropped. More changed links than can wait at once are read on the next return.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assemblies: edit a linked component in place, with the assembly around it
Activating a linked component opens the design it comes from in a tab of its own, with the
rest of the assembly drawn faded around it where the component sits, so the part's own history,
browser and commands are at hand. Finish Editing in the browser saves the part, goes back to the
assembly and closes the part's tab when the edit opened it; coming back to the assembly updates
the changed link (or Finish Editing runs Update Links when that is turned off). Update Links in
the part also reads the assembly's links again, off the window thread, and redraws the assembly
around the part; a result for an assembly changed meanwhile is dropped with a message.
The part is an ordinary tab, so saving, autosave, recovery, closing and quitting treat it as any
other design. The model scene's ghost triangles are now drawn (only the preview's were).
Preference edit_linked_in_place turns it off. Builds on the update of changed links when an
assembly's tab returns.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: a double-click opens it, Activate only activates
A double-click on a linked component edits it in place, in the browser as on a face in the
view (around the placement clicked), and the component's menu gets Edit in Place. Activate and
the browser's radio button make it the active component as they always did, so a linked
component can still be activated without opening its design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Double-click on a component's face: edit a linked one in place, activate any other
A double-click on a face in the view activates the component the body belongs to, at that
placement, as a double-click on its row does; a linked one is edited in place. Bodies of the
design itself or of the active component are left alone, and so is a double-click with a
modifier. One preference, double_click_components, covers both gestures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from review
An edit whose part never opens is forgotten instead of starting on a later open of the same
file, and the web build starts the edit after its synchronous open. Finish Editing goes on only
for a save into the linked file and in the part's own tab, waits for a "changed on disk"
answer, and says so when the part was saved elsewhere. Showing the assembly no longer drops a
refresh, which now records the links it read so coming back reads nothing twice. The faded
assembly is worked out once per picture, a bad mesh index skips its whole triangle, and the
last two status texts come from the catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: Finish Editing on the MODEL tab and the mouse's back button
Finish Editing is a command now, component.finish_edit, with its schemas: the app window
answers it, anywhere else nothing changes, as with view.fit. While a linked design is edited in
place the MODEL tab ends with a FINISH EDITING panel, pinned at the right as FINISH SKETCH is,
with a new left-arrow icon; the browser keeps only the line naming the assembly. The mouse's
back button, or a keyboard's Back key, finishes too unless a dialog, tool or sketch is open.
The assembly guide describes editing in place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the second review
Saving the assembly waits while it reads its links for the part
Finish Editing waits for dialogs, tools, sketches and prompts open in the part, also when run as a command
The assembly reads the edited part explicitly when it does not check its links on its own
The FINISH EDITING panel cannot be customized
A tab opened by an edit stays that edit's to close when the part is entered again
The mouse's back button finishes editing; the keyboard's only while no text field has focus
Refreshing the assembly keeps its selection and active component
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the third review
component.finish_edit run as a command opens nothing and answers with an error when it cannot finish; engine.batch and engine.script refuse it
A double-click or Edit in Place while a dialog, tool or sketch is open in the assembly keeps it open
What changes in the assembly while it reads its links without changing its document stays: picks, activation, components dragged but not captured
Showing the assembly while it reads its links starts no second read
A new or opened design in the part's tab ends the edit
Finish Editing keeps the part's tab open while its agent chat runs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: Update Links run as a command in the part refreshes the assembly too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: the ribbon button reads Finish Edit, as Finish Sketch does
A bare "Finish" took the catalogs' surface-finish translation (German "Oberfläche").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the fourth review
Finish Edit waits while the part's agent is in the middle of its turn, instead of keeping the tab of any chat open
A part saved while its assembly refreshes is read again when the edit finishes: the refresh records the files as it found them
A double-click on a linked component while something is open in the assembly says so instead of activating it
Commands are recognised in any spelling the engine takes, so engine.batch and engine.script cannot slip Finish Edit through
Update Links run as a command refreshes the assembly from the control channel only, not for the app's own reads
Moves of components the refresh removed are not carried over, and a refusal is one message
The command description and the guide say that the command does not save the part
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: the command is Finish Edit, as Finish Sketch is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: a command to start it, and fixes from the full review
Added component.edit_in_place {component, path?}: the double-click and Edit in Place in the menu run it, and as a command it asks nothing, so a network location not allowed yet or a design open elsewhere makes it fail instead
Finish Edit asked by the part's own agent finishes once that agent's turn ends; the button still waits for the turn
The parameters and design properties panels, with text typed and not applied yet, hold up entering and finishing an edit
A refresh is not taken up under an undo, a queued command or a feature still being computed in the assembly
Refusals say what holds them up (a refresh, a file being read or written) instead of nothing
The browser strip names the assembly that is refreshing, not any assembly
The schema description says the command does not save the part
Korean strings for every new message
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the second full review
The MCP batch tool refuses component.edit_in_place and component.finish_edit as steps instead of sending them one by one
Edit in Place asked while the assembly's agent is in its turn opens the part once the turn ends; a double-click then is refused rather than stopping the agent
Both commands answer queued: true when they wait for the agent's turn, and stopping the agent forgets what it queued
An undo, a queued command or a delete check running in the design holds up entering and finishing an edit
A refresh redraws every edit of the assembly, the parts in other tabs too
In an assembly never saved, a double-click activates the linked component as before
The control and MCP docs list the new batch and script refusals, and the commands list every way they fail
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the third full review
The MCP batch tool refuses the two commands however a step names them, an execute step too
A queued Edit in Place is checked fully when asked for, a second one is refused, and both queued requests wait for what runs in the design instead of being dropped
Disconnecting the agent forgets what it queued, as stopping it does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: help text for the Finish Edit button
main now requires help for every toolbar command (#7134), and Finish Edit
is one. Written in every language the branch's catalog carries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8226
* Theme: paste a theme into the Import tile (#8226)
Ctrl/Cmd+V on Preferences > Interface imports a copied theme file, the tile's
menu offers Paste theme, and a theme file dropped on the tile imports instead
of opening as a design. Pasted text that is not a theme keeps its usual
meaning. The tile reads "file or paste".
* Theme paste: the new strings in Arabic, Hebrew and Vietnamese too (#8226)
* Dutch: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dutch: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Hungarian: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hungarian: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Galician: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Galician: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Malay: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Malay: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Norwegian Bokmål: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Norwegian Bokmål: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat: Fewer ambient occlusion samples while the view moves (#7165)
- Draw AO with 8 samples while the view moves, 32 once it has held still for 0.25 s
- Share the settle tracking with adaptive supersampling and repaint when it settles
- ui.screenshot waits for the full-quality frame (at most half a second)
- Test the sample choice, the uniform slot, and ghosting at both counts
* fix: Set the AO sample count in the scale test frame
- scale_tests.rs, new on main, builds a gpu::Frame without ao_samples
- Use AO_SAMPLES, as the other still-frame builders do
---------
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* Logo: an option to draw it in the theme's accent
Preferences > Interface > Logo: Theme's colours (the default, as before) or
Accent, three shades of the theme's accent. ui.prefs logo_accent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Logo: US spelling for the option's label, as upstream's English catalog uses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Translations for the new options in the five complete catalogs (ar, he, ja, vi, zh)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6032
* View angles: an optional readout under the orientation gizmo and a command to set them (#6032)
View > View angles (also Preferences > Graphics, or view.angle_readout) shows the
view's pitch, yaw and roll in degrees and Ortho/Persp under the axis view or cube,
updated live; off by default. Clicking the readout opens a small card to type
exact angles, which runs view.apply.
The angles are the camera's own (Camera::view_angles / with_view_angles), about
the up axis: yaw is the heading of the line of sight (Front 0, Left 90, Right -90,
Back 180), pitch the eye's elevation (Top 90, Bottom -90), and a positive roll
turns the model clockwise. view.apply documents this convention and now refuses a
pitch past +/-pi/2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5240
* Preferences: reverse vertical pan direction (#5240)
Add "Reverse vertical pan direction" beside the horizontal setting in
Preferences > Navigation. pan_reverse_y defaults off, so older settings
files load unchanged, and flips the vertical part of two-finger pan on
every canvas through navigation::handle, independent of the horizontal
setting. Labels in en, ja, zh, de, and ko.
* Reverse vertical pan: strings as a pending locale file, with Arabic, Hebrew and Vietnamese
* Control protocol: pan_reverse_y in the sorted ui.prefs list (#5240)
* Italian: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Italian: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7495
* Flat Pattern: show the whole flat size (#7495)
Each side of the flat size and the thickness get their own row (Flat size X, Flat size Y,
Thickness), so the panel's width no longer cuts the value off after its first side.
* Flat Pattern: the flat size labels in Arabic, Hebrew and Vietnamese (#7495)
* i18n: add Bosnian (bs), Croatian (hr) and Serbian (sr) catalogs
Full translations of all English messages, the pending ones included,
kept in step with one shared terminology:
- Bosnian (Bosanski): ijekavian, Latin script.
- Croatian (Hrvatski): ijekavian, Latin script, Croatian standard terms
(točka, kut, brid, ploha, značajka, spremi, izbornik, sučelje).
- Serbian (Српски): ekavian, Cyrillic script; brand and file names,
acronyms, units, key names and placeholders stay in Latin.
The Browser panel is "Stablo modela" so it is never confused with a web
browser, and the History panel is the timeline ("Vremenska traka"), not
the undo history, per the glossary.
Registers the three catalogs, adds them to the new-language test, a
pending attribution file, and a terminology note in docs/localization.md.
* i18n(bs, hr, sr): translate the 195 messages added on main since the catalogs were made
Covers the navigation bar customisation, the render stage, the new
command help texts and the Assistant start-up preferences, so the three
catalogs again carry every English message.
* Standard Parts and Contact Set: label the rows in words, not with raw keys
The Insert Part dialog listed a size's dimensions under the library's
keys (d, head height, socket depth), and the Contact Set dialog's
checkbox read "enabled". The dimensions now take messages (Nominal
diameter, Head height, Socket depth, ...) and the checkbox reads
Enabled, translated like the rest of the dialogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contact Set: translate the Enabled checkbox's label
ui_kit::checkbox paints the text it is given; the callers translate it,
as Configuration Rules' Enabled does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Interface page's strip of tab accent colours looked up its own
word-cased names ("Sheet Metal", "Surface"), which the catalogs
mostly don't carry or carry with another meaning: in German it read
"Sheet Metal" and "Flächenkörper" where the ribbon says Blech and
Fläche. It now names each tab the way the ribbon does, through the
tab's heading message, and the Form tab gets one.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: the snap-suppress choice and Direct interaction in the user's language
The Hold to stop snapping choice joined its keys with an English "or"
("Cmd or Option", the default) in every language, and Navigation's
Direct interaction setting and its note had no message. The choice now
reads through a message with the keys as placeholders, and the setting
gets its two messages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new test away from where another open PR adds one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: 54 labels that read English in every language get messages
The construction dialogs' selection fields (First edge, Second point,
Through point, ...), the joint types (Rigid, Revolute, Slider, ...), the
Sheet Metal and Plastic rules' rows (K Factor, Flange Gap, Min Draft,
...) and a few options and prompts are passed to the label translator as
English source text that no catalog carried, so they showed English in
every language. They are added in one pending file, with the eleven
usual translations, and a test makes sure every dialog's selection
fields keep a message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dialog labels: German Flange Gap is Flanschspalt, as the catalog's Flansch
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Italian catalog lacked 1350 of the English messages. This batch
translates the 719 outside the Render workspace: Preferences, the
Assistant, the help texts, command labels, materials, navigation and
the rest. It uses the catalog's own terms (Schizzo, Lavorazione, Corpo,
Giunto, Cronologia, Struttura, Risalto, Appoggio, Aggancio a scatto).
The Render workspace's 600 messages are left for a second batch while
that workspace is still being built.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Part: name the part families in the user's language
The Type list of Insert Part and the Change Part Size dialog showed the
library's English family names (Socket head cap screw, Hex nut, ...) in
every language. Each family now has a message under its library id,
and a family the catalogs don't know keeps the library's name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Part: the Name field's automatic hint in the user's language
The hint was the English word "automatic"; it now takes the catalogs'
parts.automatic_name, which every language already translates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the family-name helper and its test away from where #8005 adds its own
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Turkish: translate the 113 messages the catalog was missing
The Turkish catalog lacked 113 of the English messages: the newer
Preferences settings, the hole presets, the slicer messages, the
Assistant's start-up options and tool summaries, and the Render
workspace's stage, shots and inspector labels. They are translated in
one pending file, with the catalog's own terms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Translate the 87 messages main added since (the navigation bar's)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: translate the texts a few dialogs draw themselves
The joints' Play/Stop buttons, the Motion Study's Loop and the BOM's
sub-parts checkboxes, the Stitch tolerance hint, the Flange type and the
Emboss wrap note were drawn as English literals; the joint lists named
each joint's type by its Rust name (PinSlot, PointOnPlane). They now take
messages, and the joint lists use the Type box's label, translated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new test away from where another open PR adds one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Surface, Sheet Metal, Plastic, Frame, Move, Align, Assembly, Cam,
Coupling, Sweep, Part Size and sketch editing dialogs refuse their
inputs with English sentences ("select bodies first", "pick faces of
one body"). The dialog translates a refusal through the catalogs as it
shows it, but no catalog carried these 96, so they showed English in
every language. They are added in one pending file with the eleven
usual translations.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Everything outside the Render workspace, which is still being built:
Preferences and the new navigation bar, the Assistant, the help texts,
command labels, materials, hole presets, the slicer messages and the
remaining dialog labels, with the catalog's own terms.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>