Source preservation only. The manifest now records the actual published index README rather than the initial selection note, and states its pre-Git-normalization hash scope. Original product proposals are unchanged. The canonical index links all branch checkpoints; validation and owner handoffs remain pending.
Canonical preservation of W10, W21, X4 and supporting W38 source proposals. Sources remain deliberately unregistered and unexecuted, with real bases and alternatives documented in proposals/drawings/README.md. Existing contributor claims and PRs remain authoritative; this is not a merge-ready integration candidate.
Use fresh local mutable counter values instead of mutable references to
constants. Enumerate the ten original copied shapes after asserting their
independent fixture count. Preserve all production code, numeric expected
values, refusals and the other tests. No lint suppression or ignored tests.
The prior 6b39ee36 attempt stopped at test-target Clippy, before native
test builds/runs and wasm. Both test-only hunks were independently reviewed;
normal formatting passed without changing bytes. New results are pending.
Remove an unused private Interval helper and collapse the copied-vertex
guard to an equivalent let-chain with identical evaluation order and error.
Preserve all 28 geometry and 10 bounds tests, limits and assertions.
The prior a7f3c78b development attempt stopped at Clippy; IO/engine tests
and wasm were not reached. Both corrective hunks were source-reviewed,
and normal formatting passed. Tests for this new source remain unrun.
Add the reviewed minimal X1 bulged-path producer, conservative bounds,
ordered layered bulge reader, ELLIPSE/TEXT imports and two original
cross-feature cases. Preserve legacy entry points; retain the two explicit
source-supported fixture migrations, not a blanket assertion relaxation.
Include the three original owner corrections from #8534 to unblock wasm,
without adopting later main or transferring upstream validation.
Normal cargo fmt --all passed. 223 declarations in the nine IO files
(333 including 110 unchanged UI/web declarations) are not test results.
This WIP has not been compiled or run; full CI and caller migration remain.
Earlier-source native passes do not qualify this candidate.
Co-authored-by: Ray <raykholo@users.noreply.github.com>
Add explicit alignment production and bounds callbacks, immutable layer-zero
initialization/import, and a reviewed fix retaining its metadata through copies.
Preserve the existing POINT and real writer-reader roundtrip foundation.
156 test declarations across four modules, including 26 additions against the
published parent; this source has NOT been formatted, compiled or run. Separate
source reviews do not qualify runtime. The older-source X2 gate remains separate.
Source-only reviewed four-file increment. 18 added test declarations, not executed. Published at the user's request; current X2 validation continues on unchanged older source.
Stacked on the owned X2 model. Includes 52 declared tests, not executed. Legacy projection and the remaining importer contract are pending; not ready for merge.
* claim: #7861
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch dimensions in a colour of their own in every theme (#7861)
Dimension lines, arrows and values were drawn in the same near-black or
near-white as fully constrained sketch curves, so they were hard to tell
apart in a busy sketch. Every theme now sets its own dimension colours:
plum on Light, orchid on Dark, and a hue from each built-in theme's own
palette. Colour vision tests measure them against the curves, the
construction lines and the conflict red, and a new test holds every
shipped theme to readable, distinct dimension colours.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Closing from the background: the window comes forward to ask about unsaved changes
Right-click › Close on the taskbar while another app had the focus showed the
"save changes?" prompt in a window that stayed behind, so the close seemed to do
nothing. When the close stops at the prompt, the window now asks for the focus
(unminimizing it first) and for the user's attention, which is what native
Wayland offers (xdg-activation) and marks the taskbar entry where the system
refuses the focus. A window already in focus is left alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* X11: ask the window manager to raise the window as a user action
winit's Focus asks as an application, which KWin's focus-stealing prevention
refuses for a window last used before the switch away: it raised nothing and,
since the attention request was then skipped, did not even mark the taskbar.
On X11 send _NET_ACTIVE_WINDOW with source 2 (a direct user action) through
x11rb, which restores a minimized window too; native Wayland keeps the
attention request. Moves the logic into come_forward.rs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Come forward once the taskbar menu is gone, without flicker
KWin raised the window, then the taskbar's closing context menu handed the
focus back to the previous app 2 to 11 ms later, so the window only came
forward some of the time; asking again made it flicker. Ask 120 ms after the
close instead, and again only when the focus is taken back within 50 ms of a
request (a slow menu) or never came. A later switch away is the user's own and
the window stays behind.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: show center and midpoint alignment guides
Add transient per-viewport horizontal and vertical guides with a sketch preference. Related tests, native UI, WASM and supplementary Linux checks pass. Full CI remains blocked by unchanged Windows engine dead-code Clippy errors.
* Sketch: complete alignment-guide translations
* Tests: compile chosen-program mutex only on Unix
* claim: #6020
* Measure: number the two picks in the view (#6020)
"1" and "2" beside the measured line's ends, as the panel lists the
picks, each just past its end so it stays off the line and its length.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* claim: #6975
* Create Sketch: the grid previews the plane under the pointer (#6975)
While Create Sketch waits for its plane, the grid now lies on the origin or
construction plane under the pointer, so the sketch's plane shows before
the click. A plane's browser row under the pointer lights that plane in the
view, and previews it the same way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Create Sketch: the planes at the top of the History preview too (#6975)
main now draws the Origin rows at the top of the vertical History as well
(history_rows). Hovering a plane there lights it like its row in the browser:
the plane is handed over the same way the hovered bodies are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Links: update linked designs that changed while the assembly's tab was away
A design coming back to its tab compares the modification time and size of its linked
design files with what they were when it went to the background, and runs Update Links
on the worker thread for those that changed: saved in another tab, another window or by
a checkout. Preference update_changed_links (Design, Linked designs) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the assembly guide says linked designs update when their tab returns
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: Vietnamese strings, now that vi is a complete catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: remember what each design last read, so an update that fails is tried again
A design's linked files are now recorded as the design last read them: when Update Links reads a
link without an error, or when the link is first seen. Coming back to the tab reads again what
differs, one link per run, so a file that cannot be read holds up no other and is tried again
the next time, and a part changed while the assembly was shown is taken up on its next return.
Closing several tabs together reads nothing on the way, and the web build, which keeps no file
times, looks at nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: no read during a save-changes prompt, records for adopted designs and missing files
A tab shown to answer "save changes?" reads no link before its save, and Cancel there or on a
batch lets the tab left in front read what it skipped. A design opened in place of the blank one
records its links at once, a link whose file is missing is recorded as missing so it is read when
the file comes back, and a read queued for a design that is no longer shown by the time it starts
is dropped. More changed links than can wait at once are read on the next return.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assemblies: edit a linked component in place, with the assembly around it
Activating a linked component opens the design it comes from in a tab of its own, with the
rest of the assembly drawn faded around it where the component sits, so the part's own history,
browser and commands are at hand. Finish Editing in the browser saves the part, goes back to the
assembly and closes the part's tab when the edit opened it; coming back to the assembly updates
the changed link (or Finish Editing runs Update Links when that is turned off). Update Links in
the part also reads the assembly's links again, off the window thread, and redraws the assembly
around the part; a result for an assembly changed meanwhile is dropped with a message.
The part is an ordinary tab, so saving, autosave, recovery, closing and quitting treat it as any
other design. The model scene's ghost triangles are now drawn (only the preview's were).
Preference edit_linked_in_place turns it off. Builds on the update of changed links when an
assembly's tab returns.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: a double-click opens it, Activate only activates
A double-click on a linked component edits it in place, in the browser as on a face in the
view (around the placement clicked), and the component's menu gets Edit in Place. Activate and
the browser's radio button make it the active component as they always did, so a linked
component can still be activated without opening its design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Double-click on a component's face: edit a linked one in place, activate any other
A double-click on a face in the view activates the component the body belongs to, at that
placement, as a double-click on its row does; a linked one is edited in place. Bodies of the
design itself or of the active component are left alone, and so is a double-click with a
modifier. One preference, double_click_components, covers both gestures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from review
An edit whose part never opens is forgotten instead of starting on a later open of the same
file, and the web build starts the edit after its synchronous open. Finish Editing goes on only
for a save into the linked file and in the part's own tab, waits for a "changed on disk"
answer, and says so when the part was saved elsewhere. Showing the assembly no longer drops a
refresh, which now records the links it read so coming back reads nothing twice. The faded
assembly is worked out once per picture, a bad mesh index skips its whole triangle, and the
last two status texts come from the catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: Finish Editing on the MODEL tab and the mouse's back button
Finish Editing is a command now, component.finish_edit, with its schemas: the app window
answers it, anywhere else nothing changes, as with view.fit. While a linked design is edited in
place the MODEL tab ends with a FINISH EDITING panel, pinned at the right as FINISH SKETCH is,
with a new left-arrow icon; the browser keeps only the line naming the assembly. The mouse's
back button, or a keyboard's Back key, finishes too unless a dialog, tool or sketch is open.
The assembly guide describes editing in place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the second review
Saving the assembly waits while it reads its links for the part
Finish Editing waits for dialogs, tools, sketches and prompts open in the part, also when run as a command
The assembly reads the edited part explicitly when it does not check its links on its own
The FINISH EDITING panel cannot be customized
A tab opened by an edit stays that edit's to close when the part is entered again
The mouse's back button finishes editing; the keyboard's only while no text field has focus
Refreshing the assembly keeps its selection and active component
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the third review
component.finish_edit run as a command opens nothing and answers with an error when it cannot finish; engine.batch and engine.script refuse it
A double-click or Edit in Place while a dialog, tool or sketch is open in the assembly keeps it open
What changes in the assembly while it reads its links without changing its document stays: picks, activation, components dragged but not captured
Showing the assembly while it reads its links starts no second read
A new or opened design in the part's tab ends the edit
Finish Editing keeps the part's tab open while its agent chat runs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: Update Links run as a command in the part refreshes the assembly too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: the ribbon button reads Finish Edit, as Finish Sketch does
A bare "Finish" took the catalogs' surface-finish translation (German "Oberfläche").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the fourth review
Finish Edit waits while the part's agent is in the middle of its turn, instead of keeping the tab of any chat open
A part saved while its assembly refreshes is read again when the edit finishes: the refresh records the files as it found them
A double-click on a linked component while something is open in the assembly says so instead of activating it
Commands are recognised in any spelling the engine takes, so engine.batch and engine.script cannot slip Finish Edit through
Update Links run as a command refreshes the assembly from the control channel only, not for the app's own reads
Moves of components the refresh removed are not carried over, and a refusal is one message
The command description and the guide say that the command does not save the part
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: the command is Finish Edit, as Finish Sketch is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: a command to start it, and fixes from the full review
Added component.edit_in_place {component, path?}: the double-click and Edit in Place in the menu run it, and as a command it asks nothing, so a network location not allowed yet or a design open elsewhere makes it fail instead
Finish Edit asked by the part's own agent finishes once that agent's turn ends; the button still waits for the turn
The parameters and design properties panels, with text typed and not applied yet, hold up entering and finishing an edit
A refresh is not taken up under an undo, a queued command or a feature still being computed in the assembly
Refusals say what holds them up (a refresh, a file being read or written) instead of nothing
The browser strip names the assembly that is refreshing, not any assembly
The schema description says the command does not save the part
Korean strings for every new message
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the second full review
The MCP batch tool refuses component.edit_in_place and component.finish_edit as steps instead of sending them one by one
Edit in Place asked while the assembly's agent is in its turn opens the part once the turn ends; a double-click then is refused rather than stopping the agent
Both commands answer queued: true when they wait for the agent's turn, and stopping the agent forgets what it queued
An undo, a queued command or a delete check running in the design holds up entering and finishing an edit
A refresh redraws every edit of the assembly, the parts in other tabs too
In an assembly never saved, a double-click activates the linked component as before
The control and MCP docs list the new batch and script refusals, and the commands list every way they fail
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the third full review
The MCP batch tool refuses the two commands however a step names them, an execute step too
A queued Edit in Place is checked fully when asked for, a second one is refused, and both queued requests wait for what runs in the design instead of being dropped
Disconnecting the agent forgets what it queued, as stopping it does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: help text for the Finish Edit button
main now requires help for every toolbar command (#7134), and Finish Edit
is one. Written in every language the branch's catalog carries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Add unit tests for fill.rs's two ray-casting predicates, which
fill_general.rs relies on to decide which parts of a surface a loop
covers: a point inside/outside a square and an L-shaped (non-convex)
loop, documenting how inside_loop resolves points on an edge or
vertex; and segments that cross, stay apart, touch at an endpoint,
or are collinear with and without overlap for segments_meet.
Closes#38
Co-authored-by: claude[bot] <41898282+claude[bot]@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
* Render: one sRGB transfer function, geom::srgb, for the hand-written copies (#7161)
Twelve places wrote the sRGB encode or decode formula out by hand (doc's glass
recipe, engine's render library, glTF import, the PNG film, photographic and
presentation output, the ray tracer's image, the stage, the surface decoder,
texture normalisation and the theme's contrast check). They now call
solidcraft_geom::srgb: encode/decode on 0..1 values, encode8/decode8 for 8-bit
codes. render::surface::srgb8_to_linear stays as a re-export, so its callers
are unchanged.
Same results: the module's tests compare it bit for bit with the formula as the
callers wrote it, over all 256 codes and a dense sweep of linear values plus
the knees, out-of-range values, infinities and NaN, for each way the callers
clamped (after encoding, before it, or not at all), and decoded values either
side of the decode knee, where no 8-bit code falls.
One change: glTF import encoded in f32. Over every f32 in 0..1, 218 of
1,065,353,217 values sit on a rounding tie that f32 got wrong and now give the
neighbouring code (f64 gives the nearer one).
Left as they are: render/job/image.rs (replaced by exact tables in its own
change), the tests and the starter-pack validator that keep their own copy as
an independent reference, and the WGSL shaders (they can't call Rust).
Fixes#7161
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: the sRGB codes of five callers that had no test of their output (#7161)
The glass swatch, a library surface applied as a plain appearance, glTF's
fallback for a colour channel that isn't a number, a stage panel and an empty
pixel in presentation output each get an assertion with their sRGB codes worked
out by hand. A planted wrong conversion at each is now caught by that test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Editing a body Mirror from the history showed Object Type Features (the dialog starts from
the timeline selection, the Mirror itself, which turns pattern objects into features) and
dropped its saved Join. The editor now sets the objects back to Bodies for a body Mirror or
Pattern and restores the Mirror's combine.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8226
* Theme: paste a theme into the Import tile (#8226)
Ctrl/Cmd+V on Preferences > Interface imports a copied theme file, the tile's
menu offers Paste theme, and a theme file dropped on the tile imports instead
of opening as a design. Pasted text that is not a theme keeps its usual
meaning. The tile reads "file or paste".
* Theme paste: the new strings in Arabic, Hebrew and Vietnamese too (#8226)
* Dutch: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dutch: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Hungarian: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hungarian: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Galician: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Galician: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Malay: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Malay: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Norwegian Bokmål: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Norwegian Bokmål: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat: Fewer ambient occlusion samples while the view moves (#7165)
- Draw AO with 8 samples while the view moves, 32 once it has held still for 0.25 s
- Share the settle tracking with adaptive supersampling and repaint when it settles
- ui.screenshot waits for the full-quality frame (at most half a second)
- Test the sample choice, the uniform slot, and ghosting at both counts
* fix: Set the AO sample count in the scale test frame
- scale_tests.rs, new on main, builds a gpu::Frame without ao_samples
- Use AO_SAMPLES, as the other still-frame builders do
---------
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* Logo: an option to draw it in the theme's accent
Preferences > Interface > Logo: Theme's colours (the default, as before) or
Accent, three shades of the theme's accent. ui.prefs logo_accent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Logo: US spelling for the option's label, as upstream's English catalog uses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Translations for the new options in the five complete catalogs (ar, he, ja, vi, zh)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6032
* View angles: an optional readout under the orientation gizmo and a command to set them (#6032)
View > View angles (also Preferences > Graphics, or view.angle_readout) shows the
view's pitch, yaw and roll in degrees and Ortho/Persp under the axis view or cube,
updated live; off by default. Clicking the readout opens a small card to type
exact angles, which runs view.apply.
The angles are the camera's own (Camera::view_angles / with_view_angles), about
the up axis: yaw is the heading of the line of sight (Front 0, Left 90, Right -90,
Back 180), pitch the eye's elevation (Top 90, Bottom -90), and a positive roll
turns the model clockwise. view.apply documents this convention and now refuses a
pitch past +/-pi/2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4451
* fix(#4451): the body colours travel with the OBJ file
An OBJ export left the colours of the design behind: the mesh file named no
material, so every body arrived in the reader's default grey. The export now
writes a material library (.mtl) next to the mesh file, with a material per
body, and the mesh file names that library with mtllib and picks the material
of each body with usemtl. Every path is checked before anything is written,
the library goes first and the mesh file last, so a mesh file never names a
library that is not there. Only the colour of the body travels: the colours of
single faces and the transparency of a body stay out, as a face colour needs
material groups inside one object. The export that writes one file stays
material-free, so it never names a library it does not write.