Files
solidcraft/assets/locales/pending/pipe-threads.json
T
jyvikoandClaude Opus 5.5 05f1c6b9ac Tapped holes: the tap maker's drill for every form, and a drill of the user's within 5%
Every tapped hole now drills the tap maker's tabulated drill. ISO metric takes Yamawa YEU23's
drill size column for cutting taps (printed p.704, M coarse; pp.704 to 706, MF fine): M8 drills
6.8 mm and M12 10.3 mm, where the major less the pitch gave 6.75 and 10.25. A custom metric size
the table lacks keeps the major less the pitch. UNC/UNF (Guhring), G, Rp, Rc and NPT (Yamawa)
were tabulated already. The Thread command's suggested hole for a metric size follows.

The Hole dialog's Tap drill diameter is now a field, the tap maker's drill by default, and the
command's `diameter` with a thread is checked the same way: a drill is accepted from the
internal thread's standard minor diameter (or the tap maker's drill where that lies below it:
Rp, Rc, NPT) to 5% over the tap maker's drill. Outside that the command names the range and
why. The field's tooltip gives the drill, the minor diameter and the range. Presets keep a
chosen drill.

A saved design keeps the diameter it stored, so it builds as before, and editing such a hole
keeps its drill: no preference and no format change. Scripts that give a thread without a
diameter drill the new default; ladder 05/007, 11/003 and rig case threads/2115 follow
analytically, and their golden entries are re-measured from runs (tier 05 re-sorted by time).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LUXeKMoxpM7Vuv8Rb6E3K2
2026-10-27 13:02:32 -04:00

45 lines
1.8 KiB
JSON
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
{
"en": {
"thread.form_bspp": "Pipe G (ISO 228-1)",
"thread.form_bspt": "Pipe taper R, Rc (ISO 7-1)",
"thread.form_npt": "Pipe taper NPT (ASME B1.20.1)",
"thread.form_rp": "Pipe Rp (ISO 7-1)"
},
"ar": {
"thread.form_bspp": "سن أنابيب G (ISO 228-1)",
"thread.form_bspt": "سن أنابيب مخروطي R، Rc (ISO 7-1)",
"thread.form_npt": "سن أنابيب مخروطي NPT (ASME B1.20.1)",
"thread.form_rp": "سن أنابيب داخلي متوازٍ Rp (ISO 7-1)"
},
"he": {
"thread.form_bspp": "תבריג צנרת G (ISO 228-1)",
"thread.form_bspt": "תבריג צנרת קוני R, Rc (ISO 7-1)",
"thread.form_npt": "תבריג צנרת קוני NPT (ASME B1.20.1)",
"thread.form_rp": "תבריג צנרת פנימי מקביל Rp (ISO 7-1)"
},
"ja": {
"thread.form_bspp": "管用平行ねじ G(ISO 228-1)",
"thread.form_bspt": "管用テーパねじ R、Rc(ISO 7-1)",
"thread.form_npt": "管用テーパねじ NPT(ASME B1.20.1)",
"thread.form_rp": "管用平行めねじ Rp(ISO 7-1)"
},
"zh": {
"thread.form_bspp": "管螺纹 G(ISO 228-1)",
"thread.form_bspt": "圆锥管螺纹 R、Rc(ISO 7-1)",
"thread.form_npt": "圆锥管螺纹 NPT(ASME B1.20.1)",
"thread.form_rp": "圆柱内管螺纹 Rp(ISO 7-1)"
},
"de": {
"thread.form_bspp": "Rohrgewinde G (ISO 228-1)",
"thread.form_bspt": "Kegeliges Rohrgewinde R, Rc (ISO 7-1)",
"thread.form_npt": "Kegeliges Rohrgewinde NPT (ASME B1.20.1)",
"thread.form_rp": "Zylindrisches Innenrohrgewinde Rp (ISO 7-1)"
},
"ko": {
"thread.form_bspp": "관용 평행나사 G (ISO 228-1)",
"thread.form_bspt": "관용 테이퍼나사 R, Rc (ISO 7-1)",
"thread.form_npt": "관용 테이퍼나사 NPT (ASME B1.20.1)",
"thread.form_rp": "관용 평행 암나사 Rp (ISO 7-1)"
}
}