jyvikoandClaude Opus 5.5 1878274cb7 Kernel tests, fillet rig: a chamfer past its rim builds, cut by what lies past it
The owner's ruling of 2026-10-30 (d7): a chamfer that reaches or runs
past a rim builds, everywhere, as SMLib's cliff overflow builds a convex
blend: on its faces' continuations, then cut by what the cliff cuts
away. The earlier rule refused a chamfer whose leg runs off its face.
SolidCraft has no such refusal of its own; SMLib refuses these, so the
cases fail on SMLib 985faaee and are listed with its reasons (traced in
gdb at SmFilletErrorInfo::NoteError):

- the sloped basin's single front edge past its rim (1 mm rim 2 and 3,
  0.5 mm rim 4): CloseRemovalRegion, "a cliff overflow's fillet boundary
  lies on the surfaces of two faces": the sheet's boundary along the end
  wall's top edge line from the edge's vertex to the top's contact
  (x = 20, y from -1 to 1, z = 30) lies on the top's plane and the end
  wall's both.
- the equal-slope basin's rim loop 2 and the 5 mm pocket's rim 5.5:
  CloseRemovalRegion, "a cliff overflow's fillet boundary closes on one
  face" (every edge of the loop blended).
- the sloped basin's front and right edges 2: status 1001,
  SmFilletNx2Corner, CalcFilletIntSideFace.
- the cylinder's rim 2 across the top and 25 down its 20 mm wall: status
  1001, SmFilletNx1ClosedCorner cannot compute its geometry.

Expectations, each from a closed form or an exact quadrature:

- chamfer_wider_than_sloped_basin_rim_is_refused becomes
  chamfer_wider_than_sloped_basin_rim_builds, ignored until SMLib builds
  it: the triangle clipped to y >= 0, times 30 + z (shoelace):
  73.450475, 142.112912, 184.526613; the rig's 1080-chamfer-sloped-
  basin-*-past-the-rim cases: V = 144459.882858, 144391.220421,
  144082.140054.
- blend_corner's a_rim_loop_chamfer_running_off_its_rim_is_refused
  becomes ..._builds, ignored likewise: sliced at depth t the mitred loop
  takes the pocket's rectangle grown by w(t) = d (1 - t / delta) on each
  side, clipped to y >= 0, less the rectangle, Simpson exact on each
  quadratic piece: 375.673069, V = 139957.660264 (the rig's
  1080-chamfer-equal-slope-basin-1-mm-rim-loop-2 too).
- 5835-chamfer-sloped-basin-1-mm-rim-2-two-edges: the same slicing with
  the front and right sides grown, 161.279149, V = 144372.054184.
- every-chamfer-pocket-rim-5-5-past-the-floor: 50 d^2 + (4/3) d^3 at
  5.5, the groove 0.5 deep round the floor included, V = 19265.666667,
  15 faces.
- 2893-chamfer-two-distances-past-the-bottom: the frustum r 8 to 9.6
  over 20, pi 20 (64 + 76.8 + 92.16) / 3 = 4879.102831, 3 faces.

Each drops "-refused" from its id (the 5.5 pocket's says past the floor).
The same slicing reproduces the existing 5835-...-4-mm-rim-2-2-edges
(176.006388), equal-slope loop 0.5 (24.455545) and half-width
(5.426545) values.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 13:52:26 -04:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .solidcraft designs.
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default "C:\Program Files\SolidCraft\solidcraft-cli.exe"). Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
https://solidcraft.io Readme
501 MiB
0 Stars 1 Watchers 0 Forks
Languages
Rust 97%
Python 2%
WGSL 0.5%
JavaScript 0.3%
Shell 0.1%