* Malay: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Malay: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Norwegian Bokmål: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Norwegian Bokmål: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat: Fewer ambient occlusion samples while the view moves (#7165)
- Draw AO with 8 samples while the view moves, 32 once it has held still for 0.25 s
- Share the settle tracking with adaptive supersampling and repaint when it settles
- ui.screenshot waits for the full-quality frame (at most half a second)
- Test the sample choice, the uniform slot, and ghosting at both counts
* fix: Set the AO sample count in the scale test frame
- scale_tests.rs, new on main, builds a gpu::Frame without ao_samples
- Use AO_SAMPLES, as the other still-frame builders do
---------
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* Logo: an option to draw it in the theme's accent
Preferences > Interface > Logo: Theme's colours (the default, as before) or
Accent, three shades of the theme's accent. ui.prefs logo_accent.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Logo: US spelling for the option's label, as upstream's English catalog uses
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Translations for the new options in the five complete catalogs (ar, he, ja, vi, zh)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6032
* View angles: an optional readout under the orientation gizmo and a command to set them (#6032)
View > View angles (also Preferences > Graphics, or view.angle_readout) shows the
view's pitch, yaw and roll in degrees and Ortho/Persp under the axis view or cube,
updated live; off by default. Clicking the readout opens a small card to type
exact angles, which runs view.apply.
The angles are the camera's own (Camera::view_angles / with_view_angles), about
the up axis: yaw is the heading of the line of sight (Front 0, Left 90, Right -90,
Back 180), pitch the eye's elevation (Top 90, Bottom -90), and a positive roll
turns the model clockwise. view.apply documents this convention and now refuses a
pitch past +/-pi/2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5240
* Preferences: reverse vertical pan direction (#5240)
Add "Reverse vertical pan direction" beside the horizontal setting in
Preferences > Navigation. pan_reverse_y defaults off, so older settings
files load unchanged, and flips the vertical part of two-finger pan on
every canvas through navigation::handle, independent of the horizontal
setting. Labels in en, ja, zh, de, and ko.
* Reverse vertical pan: strings as a pending locale file, with Arabic, Hebrew and Vietnamese
* Control protocol: pan_reverse_y in the sorted ui.prefs list (#5240)
* Italian: translate the Render workspace's 706 messages (batch 2)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Italian: the 27 Render messages main gained since (the Appearances panel)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7495
* Flat Pattern: show the whole flat size (#7495)
Each side of the flat size and the thickness get their own row (Flat size X, Flat size Y,
Thickness), so the panel's width no longer cuts the value off after its first side.
* Flat Pattern: the flat size labels in Arabic, Hebrew and Vietnamese (#7495)
* i18n: add Bosnian (bs), Croatian (hr) and Serbian (sr) catalogs
Full translations of all English messages, the pending ones included,
kept in step with one shared terminology:
- Bosnian (Bosanski): ijekavian, Latin script.
- Croatian (Hrvatski): ijekavian, Latin script, Croatian standard terms
(točka, kut, brid, ploha, značajka, spremi, izbornik, sučelje).
- Serbian (Српски): ekavian, Cyrillic script; brand and file names,
acronyms, units, key names and placeholders stay in Latin.
The Browser panel is "Stablo modela" so it is never confused with a web
browser, and the History panel is the timeline ("Vremenska traka"), not
the undo history, per the glossary.
Registers the three catalogs, adds them to the new-language test, a
pending attribution file, and a terminology note in docs/localization.md.
* i18n(bs, hr, sr): translate the 195 messages added on main since the catalogs were made
Covers the navigation bar customisation, the render stage, the new
command help texts and the Assistant start-up preferences, so the three
catalogs again carry every English message.
* Standard Parts and Contact Set: label the rows in words, not with raw keys
The Insert Part dialog listed a size's dimensions under the library's
keys (d, head height, socket depth), and the Contact Set dialog's
checkbox read "enabled". The dimensions now take messages (Nominal
diameter, Head height, Socket depth, ...) and the checkbox reads
Enabled, translated like the rest of the dialogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contact Set: translate the Enabled checkbox's label
ui_kit::checkbox paints the text it is given; the callers translate it,
as Configuration Rules' Enabled does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Interface page's strip of tab accent colours looked up its own
word-cased names ("Sheet Metal", "Surface"), which the catalogs
mostly don't carry or carry with another meaning: in German it read
"Sheet Metal" and "Flächenkörper" where the ribbon says Blech and
Fläche. It now names each tab the way the ribbon does, through the
tab's heading message, and the Form tab gets one.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: the snap-suppress choice and Direct interaction in the user's language
The Hold to stop snapping choice joined its keys with an English "or"
("Cmd or Option", the default) in every language, and Navigation's
Direct interaction setting and its note had no message. The choice now
reads through a message with the keys as placeholders, and the setting
gets its two messages.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new test away from where another open PR adds one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: 54 labels that read English in every language get messages
The construction dialogs' selection fields (First edge, Second point,
Through point, ...), the joint types (Rigid, Revolute, Slider, ...), the
Sheet Metal and Plastic rules' rows (K Factor, Flange Gap, Min Draft,
...) and a few options and prompts are passed to the label translator as
English source text that no catalog carried, so they showed English in
every language. They are added in one pending file, with the eleven
usual translations, and a test makes sure every dialog's selection
fields keep a message.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dialog labels: German Flange Gap is Flanschspalt, as the catalog's Flansch
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Italian catalog lacked 1350 of the English messages. This batch
translates the 719 outside the Render workspace: Preferences, the
Assistant, the help texts, command labels, materials, navigation and
the rest. It uses the catalog's own terms (Schizzo, Lavorazione, Corpo,
Giunto, Cronologia, Struttura, Risalto, Appoggio, Aggancio a scatto).
The Render workspace's 600 messages are left for a second batch while
that workspace is still being built.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Part: name the part families in the user's language
The Type list of Insert Part and the Change Part Size dialog showed the
library's English family names (Socket head cap screw, Hex nut, ...) in
every language. Each family now has a message under its library id,
and a family the catalogs don't know keeps the library's name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Insert Part: the Name field's automatic hint in the user's language
The hint was the English word "automatic"; it now takes the catalogs'
parts.automatic_name, which every language already translates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the family-name helper and its test away from where #8005 adds its own
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Turkish: translate the 113 messages the catalog was missing
The Turkish catalog lacked 113 of the English messages: the newer
Preferences settings, the hole presets, the slicer messages, the
Assistant's start-up options and tool summaries, and the Render
workspace's stage, shots and inspector labels. They are translated in
one pending file, with the catalog's own terms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Translate the 87 messages main added since (the navigation bar's)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: translate the texts a few dialogs draw themselves
The joints' Play/Stop buttons, the Motion Study's Loop and the BOM's
sub-parts checkboxes, the Stitch tolerance hint, the Flange type and the
Emboss wrap note were drawn as English literals; the joint lists named
each joint's type by its Rust name (PinSlot, PointOnPlane). They now take
messages, and the joint lists use the Type box's label, translated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the new test away from where another open PR adds one
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The Surface, Sheet Metal, Plastic, Frame, Move, Align, Assembly, Cam,
Coupling, Sweep, Part Size and sketch editing dialogs refuse their
inputs with English sentences ("select bodies first", "pick faces of
one body"). The dialog translates a refusal through the catalogs as it
shows it, but no catalog carried these 96, so they showed English in
every language. They are added in one pending file with the eleven
usual translations.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Everything outside the Render workspace, which is still being built:
Preferences and the new navigation bar, the Assistant, the help texts,
command labels, materials, hole presets, the slicer messages and the
remaining dialog labels, with the catalog's own terms.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Everything outside the Render workspace, which is still being built:
Preferences and the new navigation bar, the Assistant, the help texts,
command labels, materials, hole presets, the slicer messages and the
remaining dialog labels, with the catalog's own terms.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Everything outside the Render workspace, which is still being built:
Preferences and the new navigation bar, the Assistant, the help texts,
command labels, materials, hole presets, the slicer messages and the
remaining dialog labels, with the catalog's own terms.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the status in the view and the browser's editing mark in the user's language
While a sketch is edited, the view's corner said "Sketch1 — 2 degrees of
freedom" (or "fully constrained", "constraints conflict") and the
browser marked the sketch "(editing)" or "(attachment lost)", in
English whatever the language; one degree of freedom read "1 degrees of
freedom". They now take messages: the catalogs' existing degrees-of-
freedom ones and four new ones.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch status and editing mark: the sketch's default name as shown elsewhere
The browser shows a default name in the user's language ("Skizze 1")
except on the edited sketch's row, whose mark made it a different text;
the view's status kept the stored name too. Both now use the name as the
browser shows it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Motion Study, Motion Trace, the motion plot, Explode and the contact
check drew their notes and refusals as they got them ("add a key for a
joint first", "select a point on a component", "none"), so they read
English in every language. They now go through the label translator, and
the four that no catalog carried get messages.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Maya moves the camera with Alt and any button (left orbits, middle pans,
right zooms), middle drag also pans. HFSS pans with Alt+left drag and zooms
with Shift+Alt+left; its Ctrl+left orbit is the drag from empty space every
preset already has, so a Ctrl+click on geometry still adds to the selection.
The help texts are in the catalog for every locale that has the other
presets' help.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>