* Sketch Intersect: add Faces/Bodies and Projection Link options (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Sketch Project: add Geometry/Bodies and Projection Link options (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Sketch Project/Intersect: keep exact lines and arcs of whole bodies, no noisy rebuild warning (#1110)
Whole-body silhouettes and sections fit lines and arcs tightly and snap arcs
tangent to their neighbours. A rebuilt projection warns only when it removed
the user's own constraints or curves. Pending locales cover ar, he and vi, and
the preselection tests use the direct-pick workflow.
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* Select Other: label curves from Intersect as intersected (#1110)
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com>
* claim: #8692
* Browser: remember the folded card across runs, optional reveal on hover (#8692)
The browser card's fold (the chevron in its header) is now a preference,
saved with the other layout state, so the next run starts the way the user
left it. Preferences > Interface > Layout adds Shown / Reveal on hover: the
browser then stays out of sight until the pointer comes over its place or
the thin tab at its left edge, fading in like the navigation bar's Hide
until hovered, and stays while the pointer is inside or a menu, drag or text
edit started from it is open. It never folds in that mode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: move the reveal-on-hover messages to a pending locale file (#8692)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7023
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Status bar: switch the mouse mapping from a menu (#7023)
The status bar gets a mouse-mapping button beside the units. It shows the
current mapping, and a click opens a menu of the mappings above the bar.
Picking one sets what Preferences > Navigation sets for it (bindings, wheel
direction, middle double-click, right drag orbits) through
choose_nav_preset. Nothing changes while the status bar is off (the
default).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4176
* Preferences: mouse-wheel zoom speed (#4176)
A 0.25x to 4x multiplier for each wheel zoom step, applied in
navigation::handle so every canvas uses it. The 3D mouse keeps its own
speed. Values outside the range are refused when set and reset to 1x when
loaded.
* Control protocol: wheel_zoom_speed in the sorted ui.prefs list (#4176)
* Wheel zoom speed: its label in the complete catalogs (#4176)
* Arabic: fix the Resize Part hint (tanween style, part list, command name)
* Arabic: navigation bar Edge reads as position, tanween spelling in the geometry budget help
* Trackpad: zoom with two-finger scroll while holding a key, chosen in Preferences (#8322)
Holding the zoom key turns a vertical two-finger scroll (or a wheel) into zoom at
the pointer, with the wheel zoom's speed, direction and anchor, so a laptop user
zooms without pinching. Preferences > Navigation > "Zoom with two-finger scroll
while holding": Cmd on macOS and Ctrl elsewhere (default), Option/Alt, Ctrl, or
Off. That key with the scroll did nothing before, so no default changes; Off
keeps it that way. Shift keeps its orbit.
* Trackpad zoom modifier: off by default (#8322)
Scroll keeps its usual meaning until a key is chosen in Navigation.
* Trackpad zoom modifier tests: Off is the default; tests that zoom choose Cmd (#8322)
* Trackpad zoom modifier: zoom once alongside the Ctrl+wheel pinch from #8539 (#8322)
A wheel the chosen key claims is no longer also read as a pinch, and a key that is not
chosen keeps main's pinch handling unchanged.
Align gets an Object Type row (Bodies | Components). In Components mode it runs the new
occurrence.align command, which moves only the chosen occurrence placements (their
transforms) instead of adding an Align feature to the shared component, so other instances
stay where they are.
- occurrence.align: from/to points, snaps, planar faces and planes in world coordinates,
flip, capture/pending, grounded and rigid-group refusals as occurrence.move.
- A viewport or browser-body pick takes the placement directly under the active component.
- A placement inside a subassembly placed more than once still moves (as occurrence.move
does) but the dialog warns, and the reply lists it under shared.
* claim: #7688
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Graphics: a background colour of your choice for the 3D view (#7688)
Preferences › Interface › Theme gets a Background row: the theme's
gradient (the default, unchanged) or one colour for the whole application,
filling the view in either theme. The window keeps its own colours, a
picture of the view (`ui.render`) takes the colour too, and `ui.prefs`
sets it as `viewport_background` ([r, g, b] or null).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat: add joint-aware assembly Move handles and live motion readouts
* test: improve render job failure diagnostics
* fix: preserve assembly Move compatibility and viewport theme colors
* ci: skip default label sync for fork PRs
* fix: keep Windows CI checks portable after main rebase
* test: cover RTL assembly strings and stable refraction job
* i18n: cover assembly Move in Vietnamese
* i18n: cover assembly Move in French
* fix: complete CGA palette for assembly motion handles
* fix: complete Assembly Move palettes and Turkish strings
* fix: retain assembly move cache answers and toolbar help
* style: format merged assembly Move navigation guard
* fix: align Assembly Move preferences and tests with main
* Fix offline update fixture synchronization and clipped prism intersections
Wait for all v5 manifest requests before deploying v6. Intersect hole-free prism sections over their common height, retaining the established B-rep path for newly clipped perforated sections. Preserve the failing property seed and add closed-form and cap-boundary regressions.
* claim: #8095
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095)
component.properties and occurrence.properties report each closed body's
inertia tensor about its centre of mass, and in total the tensor about the
total centre of mass (world axes, g·mm²), its principal moments and axes,
the first moments, and with `about: [x, y, z]` the tensor about any point.
The tensor comes from each body's welded export mesh, tessellated once per
body, scaled to the measured mass and turned by each placement; bodies add
by parallel axes. The maths is a new crates/geom inertia module.
The Properties window shows the first moments, the tensor, the principal
moments and axes, and the view marks the centre of mass with the principal
axes while it is open. Inspect → Measure → Properties now opens that window
(it ran the command and showed nothing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: Copy matrix, and the whole design's card titled just Properties (#8095)
Copy matrix, under the tensor, puts it on the clipboard as three lines of
tab-separated values at full precision, in the units shown. The card for
the whole design is titled Properties; one opened on a component,
placement or bodies keeps its name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Properties: measure beside the window, so a large assembly doesn't freeze it (#8095)
Properties ran on the window thread: 18 s on a 144-body design, with the
window answering nothing meanwhile (#5203). In the desktop app the card now
measures on a copy of the session on a worker, the way #4614 made agents'
measures work, says "Measuring…" until the reply is in, and Close drops it.
A quick measure still shows at once; headless, tests and the web measure in
place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4127
* Render preview: geometry budget from the device, readable refusals (#4127)
The Render preview refused every scene over a fixed 128 MiB of geometry. On
desktop the budget now follows the device's buffer limit (eight of its
largest buffers, at most 2 GiB; 2 GiB with the usual 256 MiB buffers). The
web keeps 128 MiB.
The product upload runs under its own GPU error scopes: an allocation the
device refuses is reported in the preview instead of reaching the device's
uncaptured-error handler, and the half-uploaded batches are dropped. Buffer
uploads map the buffer themselves so a refused buffer fails the upload
rather than panicking in create_buffer_init.
Refusals name the geometry size and the limit and say how to get under it,
on a theme panel card that stays readable on any preview background.
* Render preview: keep the previous geometry budget behind a preference (#4127)
* Render preview: adapt the device budget to main's GPU upload errors (#4127)
* claim: #5717
* ui(feat): let users choose visible toolbar tabs
Keep Sheet Metal and Weldments visible by default while adding persisted tab visibility controls and restoring specialty tabs for designs that use them.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* ui(fix): respect hidden toolbar tabs in every design
Remove feature-based visibility overrides for Sheet Metal and Weldments. Keep all tabs visible by default and preserve the user choice across feature creation, opening designs, selection and undo.
Signed-off-by: Karl Von Richter<karl@embeint.com>
---------
Signed-off-by: Karl Von Richter<karl@embeint.com>
* claim: #7724
* Update now installs the newest release, checked when pressed (#7724)
* Update: close the unmanaged-install test after the rebase (#7724)
* Update: the refresh messages in Arabic, Hebrew and Vietnamese too (#7724)
* claim: #8183
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation bar: can sit at the top of the view (#8183)
Preferences > Navigation bar gets an Edge choice, Bottom (default) or Top.
On top the bar sits under the ribbon, its menus open downwards and its
tooltips show below it; the OK/Cancel pair and the axis view move down
below it when they would overlap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Navigation bar: the edge's labels in the complete catalogs (#8183)
ar, he, ja, vi and zh carry every English message; the Edge row's three
labels were missing from them, so `xtask i18n --check` and
`every_complete_catalog_carries_every_english_message` failed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Resize Part: say what it works on instead of a parameter error; Parts opens the library (#8735)
Resize Part (parts.resize) started with no standard part selected, as the
ribbon starts it, ran the command with no parameters and showed
"`component` must be an id or a name". It now says to select an inserted
standard part, and that Scale resizes a body. Parts (parts.library) only
listed the library, so its button did nothing: it opens the Insert Part
dialog. The German and Dutch button labels said "scale" ("Teil skalieren",
"Onderdeel schalen"), like the Scale command: they now say change size.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Resize Part: the German label matches the command, and the test checks that nothing ran (#8735)
The German ribbon label reads "Bauteilgröße ändern", the name the command,
its dialog and its messages already use. The hint for a missing standard
part is now one function shared by the ribbon start and the Browser's
Change Part Size. The regression test also checks that the design and its
history stay as they were and no message carries the command's own error,
that a scripted parts.library still only lists the library, and that with a
standard part picked Change Part Size opens on it.
---------
Co-authored-by: semmelrinde <124386289+semmelrinde@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Render lights: uniform light list, solo and mute, and the Light editor
* Render lights: Lighting and Light editors to the approved design
* Render lights: the scale-test frame carries the product light list
* Restore the stable Render light mute target on the shared eye control
* fix: validate the viewport BRDF probe with current shader dependencies
* fix: compile legacy lighting controls only for tests
* fix: scope the legacy lighting preset import to tests
* fix: reuse the merged Add Light label and translations
* test: enable the implemented Add Light radial action
* fix: restrict the legacy CPU vector editor to tests
* test: reveal Output before checking Lights browser focus
* test: use the published Browser card rectangle for Output scrolling
* test: reveal Output children before exercising editor navigation
* Render shot editor: camera and frame controls, aspect presets, guides and the frame overlay
* Render shot: Shot editor and Scene overview to the approved design
* Distinguish Render stage variants from native window frames
* fix: restore library inspection after clearing shot selection
* test: follow the merged Output Check navigation
* test: inspect Check without requiring a preflight result
* test: cancel Shot removal through its shared dialog action
* fix: remove obsolete Inspector stage form after editor integration
* fix: preserve Appearance Advanced when clearing Wear focus
* test: expect the dedicated Check editor from Scene overview
Saving gave no sign that it worked, while an export names the file it wrote.
After Save or Save As, the status line now reads "Saved <path>".
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4359
* Canvas and Decal say where to click after the image is chosen (#4359)
After picking an image the placement tool started silently, so it looked
as if nothing had happened. Show the tool's placement hint as a toast while
it waits for the click (translated), and end it once the image is placed.
* Canvas: include placement hint in viewport obstacles (#4359)