* claim: #4420
* Renaming a parameter follows it into sheet-metal and plastic rules and canvases (#4420)
Document::rename_param rewrote other parameters, feature inputs, dimensions,
configurations and joints, but not the expressions of sheet metal and plastic rules or
the plane a canvas lies on, so after a rename the sheet metal and plastic features
using them failed with "unknown parameter" and the canvas left the view. It renames
them there now, and param_users lists them (a rule's field, a canvas's input), so a
parameter they use can't be deleted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: rules' features in drives and the graph; shared rule field lists (#4420)
A sheet metal or plastic rule that uses a parameter makes the sheet metal (or plastic)
features rebuild when it changes, so parameters.users lists them in drives and
parameters.graph links them. SheetRule::fields/fields_mut and PlasticRule::fields_mut
replace the hand-written copies of the rules' fields in params.rs, eval.rs and
sheet.manage_rules. Suggested by @CamWight.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fmt (#4420)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4538
* CLI: --help on each subcommand prints its usage and exits 0 (#4538)
Every command now answers `--help` and `-h` with its own usage on stdout and
exit 0, the way the top level has since #1828. Before, each subcommand
answered differently: `fuzz --help` started a fuzz run with the default seeds
and ran until it was stopped, `recipe --help` took the flag for a file name,
and `snapshot`, `render`, `oracle`, `run`, `eval`, `script` and `crashes`
answered with an error on stderr and exit 1.
The help is read before the command runs, so `--help` never starts work: no
fuzz run, no MCP server, no file read.
`fuzz` also refuses an argument it doesn't take, as `snapshot` already did: a
flag it doesn't know and a stray word are errors, not arguments to ignore
while a hundred seeds run.
The usage lives in one place now: each command's lines are a constant, and the
top-level usage is composed from them, so the two cannot drift apart. The
top-level usage is unchanged, byte for byte.
# Conflicts:
# apps/solidcraft-cli/src/main.rs
A Single hole can take up to two straight edges of its face as references,
each with the distance of the hole's centre from that edge's line, measured
in the face's plane. `solid.hole` takes them as `references: [{edge, distance}]`;
the edges are found again by their persistent names, else their points, so
the hole follows them when the part changes, and each distance is a
parameter. A bad reference (no edge there, a curved edge, one square to the
face, parallel edges, a negative distance, a centre off the face) is refused.
In the Hole dialog, Reference 1 and 2 follow the face, each with its Distance
row; the canvas shows each distance as a dimension from its edge to the hole,
with a box just past the edge to type it in. Picking an edge measures its
distance (and its box takes the keyboard), typing one moves the hole, and
moving the hole measures them again. Edit Feature picks the edges again with
their distances.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Placing a Single hole put it exactly where the click landed, with nothing to line it up by and no
way to move it but taking it out and picking again; the dialog was a list of size fields.
- Preferences › Design › Create Hole has two settings, both off by default, so a new installation
places holes as before:
- Snap to face and edge centres (`hole_snaps`): the planar face under the cursor offers its
middle and the centres of its round edges (a boss, a rounded corner, a hole already there) as
marks; a pick near one, or on or beside such an edge, takes that centre and the mark is named.
Sketch points on the face still come first; Alt or Ctrl held places it where clicked.
- Move holes by clicking or dragging (`hole_moves`): each placed hole has a handle that drags it
(snapping when snaps are on) and takes it out when clicked, and a pick elsewhere on its face
moves it there. Edit Feature shows the handle too, so a hole can be moved later (#1047).
- The Hole dialog draws a section of the hole as its options make it, with each size in a field
beside the dimension it sets; a hovered or focused field lights its dimension. The layout is a
new kit element, `ui_kit::figure_rows` (a caller-painted figure beside captioned fields).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A new kit control, `ui_kit::count_field` / `count_row`, is an expression field for a
whole-number count with stacked step arrows at its right edge. An arrow steps the
evaluated count by one within the field's limits: a plain number is replaced, an
expression keeps its parameters and gains or adjusts a trailing `+ n`. The text
changes as typing changes it, so the live preview follows.
Used by the Quantity rows of the sketch Rectangular (1-500, both directions together
at most 500) and Circular (2-500) patterns, and the solid Rectangular, Circular and
Path patterns (1-1000).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4434
* Join: say so when the joined piece doesn't touch the body (#4434)
A Join (extrude, revolve, sweep, loft, pipe, coil, primitives, thicken,
boundary fill, surface network) whose material meets none of its targets
still joins it to the first target as a separate piece. The result stays
as it was; the feature now warns: "the joined piece doesn't touch `Body1`,
so `Body1` is now in 2 separate pieces (New Body makes it a body of its
own)". History marks it and the command reply carries it.
The check compares pieces (outer shells, not voids) of the bodies the
feature changed or absorbed before and after it, so it holds for the
batched multi-profile path too, stays quiet for a join that bridges
pieces or closes a cavity, and leaves Combine (which joins the bodies it
is given) alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
cadmpeg 0.6.3 is pure Rust (ruzstd instead of the zstd C library, zip 9), so
solidcraft-io depends on it on every target and the wasm build reads .FCStd
and .3dm files like the desktop app. The browser's file pickers offer them.
0.6.3 replaces DecodeOptions::container_only with a decode depth; ask for
Geometry, what its STEP writer reads. zip 8 leaves the tree, and with it the
three cargo-deny advisory exceptions kept for it.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* claim: #4302
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Timeline: suppressing a feature keeps later features' body names (#4302)
Bodies numbered by the counter (`BodyN`) take the next free number on every
recompute, so suppressing a feature that made one moved every later counted
body down one (`Body2` became `Body1`) and broke what named it, such as a
Move of `Body2`. timeline.suppress now stores the current names of later
features' counted bodies in their `body_names` first, as body.rename already
does for a renamed counted body (#1109). Engine only: no evaluation or
design-format change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Timeline: a body made while a feature is suppressed keeps its name (#4302)
Suppressing a feature freed its counted name (`Body1`), so a body made
meanwhile took it and became `Body3` once the feature was back. Suppress
now also stores the suppressed feature's own counted names, and the
evaluator adds the names stored on earlier suppressed features to the
state's `reserved_body_names` (the names a rename freed, #4957), which the
`BodyN` counter passes by. They are taken from the design before each
feature is computed and are part of the state digest, so a cached result
is only reused when they match.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Add a small test boat to steer around with the 3D mouse
A little hull in its own camera, drawn by the UI itself and not the CAD
viewport, so a 3D mouse can be tried out without opening a design. It
brings the model (generated by assets/models/make_test_boat.py) and the
tests for how the camera moves it.
Nothing uses it yet; Preferences picks it up with the rest of the 3D mouse
work.
* UI kit: keep a choice row from flipping with the scrollbar
A choice row picks segments or a dropdown by whether its labels fit. A page
scrollbar that comes and goes narrows the row by its own width, so the row
could flip back and forth between the two on a page that sits right at the
edge. It is now judged on the whole row and through a small helper,
fits_steadily, that only changes its answer once the miss is wider than the
scrollbar.
Also tests for that, for typed numbers in a slider's value box, and a
test hook to put up the issue-report input barrier by hand.
* 3D mouse: device model, guided calibration, buttons and a picture
The 3D mouse becomes a device we know something about instead of six raw
numbers.
The reader picks between spacenavd and the direct hidraw driver, falls back
from one to the other, and says so when it can't open the device. Guided
calibration asks whether the device is a spring cap or a trackball, adds a
touch step, and uses a settle filter so a ball let go of stops reading as
motion. Buttons get jobs (keys, held modifiers, commands), saved per
device, with defaults for the SpaceMouse Pro.
Preferences gets a picture of the device that moves as it does, next to the
test boat, and the same picture can sit in the 3D view at Left Viewport,
Right Viewport or Left Window, above the floating History card like the
legend and readouts.
These ride together because the crate's calibration types, the Preferences
page, the Linux reader and the button hook all use each other.
* 3D mouse: offer to calibrate an uncalibrated device
When a 3D mouse shows up that has not been calibrated, a card in the 3D
view offers to calibrate it, to swap drivers when the other one would work
better, to close, or to never ask again. It is made once per device, goes
away after 30 seconds in view, and gives way to a status or computing
toast instead of stacking on it.
The card is the shared toast, which now takes buttons: they group by
purpose, wrap inside the card at narrow widths, and do nothing while an
issue report holds CAD input. The picture of the device in the 3D view
keeps clear of the card.
* 3D mouse: translations and attribution
The 3D mouse strings (ui.3d_mouse_*, the calibration steps and the offer
card) in every shipped language, the Japanese catalog note, and the credit
for the test boat model in ATTRIBUTION.md.
This is last because the code before it only looks keys up: it builds and
runs without these, falling back to English until they land.
* 3D mouse: draw its preferences with the settings kit like the rest of Navigation
The 3D mouse section was a folded header with its own layout. It now
uses the same kit as the sections above it: a settings_section card,
settings_form rows with the shared label column, dividers between the
device, axes, picture and buttons groups, Text::Hint for the helper
lines, and settings_control_width for the dropdowns.
The section is open like every other one (the header still folds it),
so the device badge on the folded header is gone; the calibration row
already names the device. Every setting, string and key is unchanged.
Tests that unfolded the section no longer click it, and the hint lines
are looked up as hints instead of notes.
* 3D mouse: show each axis's live tilt in Preferences, like main's axis rows
Each view axis row is main's axis row again: a meter that follows the tilt of the motion driving it, with the dead zone marked, next to Invert, Speed and the "driven by" menu. The meter reads the calibrated travel when the device has a calibration and the raw reading over full scale when it does not, and asks for a frame whenever the reading changes. The helpers are back as they are on main, and the calibration state is a badge by the enable toggle.
* 3D mouse: line its preferences up with the rest of Navigation
- The two checkboxes sit side by side in the same two-column grid as Wheel and trackpad.
- Row labels stop repeating "3D mouse" and use sentence case: Calibration, Driver, Restore defaults, Reset view, Left viewport, Right viewport, Left window.
- Hints line up under the control column instead of the left edge.
- The six view axes are named Pan X, Pan Y, Zoom, Orbit X, Orbit Y and Roll so they fit the name column.
- Buttons are a divider and rows in a form like the other groups, without the bold sub-heading.
- The driver, dead zone, axes, picture and buttons sit behind a collapsed Advanced section, since most people never touch them.
* 3D mouse: tidy the Advanced test for clippy
Rebased onto main as one commit (was 120d26f7, df488f9a, db9d1073 plus
merges of main).
- A request the app reports as still running (#1618) is waited for on the
same connection through `control.pending`; past the wait the error says it
was not cancelled and will still apply (or only write its file), later calls
are not sent behind it, and the new read-only `pending` tool returns its
result once it lands.
- A failed batch says what really happened: `rolled_back` only when the
design is back where the batch started (as #3288 / #3242 on main: the app's
`rolled_back` is believed; for an older app, every completed step undone;
only a rollback asked for is reported as one), plus `applied`, `not_run` and
`failed.still_running`.
- A batch step may name a tool (set_parameter, list_commands,
describe_command, execute, measure, inspect_design, undo, redo, export, save,
open, new_design, crash_reports); screenshot, body_topology, batch and
pending are refused before anything is sent.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* docs(mcp): Windows setup for Claude Desktop (paths, two servers, Store config file)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs(mcp): say the Store build can keep the config elsewhere, not that the other path fails
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Retain MID snaps across both picks and materialize reusable midpoint
constraints for point-to-line and point-to-point dimensions. Let midpoint
pairs choose horizontal or vertical spans with pointer placement before
entering a value.
Cover projected model edges, overlapping geometry, helper reuse,
undo/cancel/reopen, and existing angular and line-circle workflows.
While a section is on, Section Analysis opened with no plane picked now
says "No plane picked: OK turns the section off." and OK runs
inspect.section {"clear": true}. With no section on, OK with no plane
still asks for a plane.
Fixes#2410.
* claim: #4922
* UI: let themes own corner radii
* UI: use four-point panel and window radii in SolidCraft 95
* UI: align the 95 radius assertion with four-point panels
* claim: #4953
* UI: let themes own structural and control borders
* UI: single Blueprint outlines and dotted secondary rules
* UI: separate container outlines and add theme-owned 95 bevels
* claim: #5007
* UI: apply theme palettes to icons, workspace tabs and Gruvbox settings
* claim: #5045
* Viewport: invalidate cached geometry colours when the theme palette changes
* UI: preserve legacy theme logo colours with the borderless mark
* assembly(feat): ground first parts and drag free joint chains
Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(fix): update movable fixtures for first-part grounding
Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(test): keep the motion-cost crank free
Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(test): free the frame placement fixture
Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main.
Signed-off-by: Karl Von Richter<karl@embeint.com>
---------
Signed-off-by: Karl Von Richter<karl@embeint.com>
* Extrude: picking a face, vertex or parallel plane off the profile turns the extent to To Object
With profiles picked, a face off their plane (or curved), a vertex off it, or a
construction plane parallel to it is taken as the To Object target instead of
another profile: the extent switches without the Extent Type choice, and the
distance shows how far the target is. Coplanar faces still join the profiles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude: automatic To Object is a Preferences setting, off by default
Preferences > Design > "Extrude to a picked target" (`extrude_auto_to_object`, default
false) turns the automatic To Object on. Off, picks in the Extrude dialog only add
profiles and the distance is not synced to a target, as before this change.
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #4587
* Agent chat: end the agent's process group with the system call (#4587)
The group was signalled with a `kill` program: `kill -s TERM -- -<pgid>`.
That works with procps' `kill` and with BSD's, but busybox' `kill` takes no
`--`: it prints its usage, exits 1 and signals nothing. The agent's helpers
(the CLI an adapter wraps, the MCP servers it starts) then stay alive after
the agent is ended.
The group is signalled with the system call instead, so no `kill` program and
no shell are needed and the behaviour is the same everywhere. `nix` (MIT) is
already in the tree through zip, and only on Unix: the browser build does not
take it.
The two tests that cover this now pass where they failed before:
`agent_chat::process::tests::dropping_the_process_ends_its_group` and
`agent_chat::process::tests::stopping_the_agent_leaves_no_helpers_running`.
* claim: #4692
* Delete removes a selected construction axis (#4692)
Delete on a construction axis skipped it with "the origin axes can't be
deleted". It now deletes the construction axis feature, like construction
planes; the origin axes X, Y and Z are still refused.
Keep physical modifier events out of the ordinary-key slot, preview held keys immediately, and confirm after release and a one-second settling interval. Preserve legacy control-channel modifier behavior while allowing explicit physical Control/Command input. Add regression coverage, a UI scenario, localized guidance and documentation.
Fixes#1809.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #4965
* Joins and cuts follow only the placements they depend on (#4965)
Tests that turning a joint between parts cuts no hole again, and that a
tool cutting another part cuts again when that part moves relative to it,
while an unrelated part moving keeps the result.
Booleans and Combine now hash only the placements of the bodies they take
as inputs, relative to the frame that evaluates them (#3397), so these
pin that behaviour for joins and cuts with named targets across parts.
The app opens its localhost control channel on port 27878 (or the next free
one) unless Preferences > Assistant turns it off; --control and
SOLIDCRAFT_CONTROL_PORT still win. A current.port discovery file lets
solidcraft-cli mcp find the running app with no arguments.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #5079
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Crash journal keeps component.activate (#5079)
Activating a component changes only the session's active component and
occurrence path, not the design, so the journal dropped the command and a
crash report's replay built later parts under the previously active
component. The journal now also keeps a command that changes either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5124
* Flatpak: find the host's fonts for CJK text and the font list (#5124)
Inside the Flatpak sandbox the host's fonts are mounted at /run/host/fonts
and /run/host/user-fonts, which no font search looked at. Japanese and
Chinese text fell back to boxes, and the font list missed the host's
families.
- Search both folders for the CJK and Chinese fallbacks and for the
installed-font list.
- The CJK fallback reads SOLIDCRAFT_FONT_DIRS (a path list, as the font
list already does), with CRAFT_FONTS_DIR kept as a fallback.
A line drawn across a circle only snapped its end onto the curve, so a
diameter could miss the centre at any angle. Near the centre the line now
locks onto the radial line: on the rim it stays on the circle and the centre
is kept on the line, and on the centre point the end lands there.
* claim: #5137
* Dragging a part along its joint no longer highlights what's under the pointer (#5137)
The viewport's hover pick was skipped during a box selection and camera
moves, but not while a jointed part was dragged, so faces and edges under
the pointer lit up on every frame of the drag. The pick now waits until
the joint drag ends.
* claim: #3250
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Return to the originating toolbar tab after finishing a sketch (#3250)
A sketch started from SHEET METAL or PLASTIC always ended on the SOLID
tab. Remember the tab that was active when the sketch began
(UiState::sketch_return_tab, not saved) and go back to it when the
sketch ends. Falls back to SOLID when that is not one of the normal
toolbar tabs. A sketch started from SOLID behaves as before.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Test: no one-element loop in the return-tab test (clippy single_element_loop)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #3216
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameter import and canvas image pickers offer their file types (#3216)
Both opened the picker with no file type of their own, so it listed only
designs, CAD files and meshes (and All files). macOS lets you pick only
the types a filter names: CSV parameters, and PNG or JPEG images for a
canvas, were greyed out. They now ask for csv/json and png/jpg/jpeg,
which the picker lists first (#1801).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3372
* Fix Escape cancellation in Change Parameters
Consume Escape before parameter editors can commit pending text on focus loss, while preserving autocomplete and shortcut capture priority. Add 11 UI regressions covering draft cancellation, preview cleanup, document and history preservation, and reopening saved values.
* claim: #3858 (3MF import: names from a Bambu Studio project)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3MF import: name a Bambu Studio project's bodies after its objects (#3858)
Bambu Studio leaves the name off the root model's objects and keeps it in
Metadata/model_settings.config (<config><object id="N"><metadata key="name">),
so every object of a project came in as Mesh1, Mesh2, ... A build item whose
root object has no name of its own now takes the object's name from those
settings. A name in the model still comes first, and part names, other
settings and objects of other model parts are left alone.
The settings are read only when a body needs a name, within what the model
parts left of the 1 GB budget. Settings that can't be read (malformed, nested
too deeply, too large) never fail the import: the bodies keep the generic
names, with a warning saying why.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3838
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Cancel Sketch: leave a sketch without keeping its changes (#3838)
sketch.cancel (Cancel Sketch, ribbon Exit group and the sketch's
right-click menu) puts the design back as it was when the open sketch
was created or opened for editing: a new sketch is removed with its
dimension parameters, an edited one returns to how it was. It is one
undo step, so Undo goes back into the sketch.
The session remembers the design and the undo history at the point a
sketch is entered. Cancel uses that only while the history still runs
through it (the same steps before, every step since taken in this
sketch); otherwise it refuses and points to Undo, so a stale entry can
never throw away later work.
The icon is the approved close glyph in the sketch accent (alias
sketch_cancel); ja and zh carry the new label.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3857
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Joint dialog: a body of a further instance picks that occurrence, not the component's first (#3857)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #4100
* Deleting an inserted file removes its components, placements and joints (#4100)
A STEP or mesh file inserted into a design makes a component tree. Deleting
its feature left that tree behind: the components, their occurrences, the
rigid joints that hold them and the bodies' component assignments. A later
body that took an imported body's name was then placed in the stale component.
Document::remove_component_tree removes a component subtree and everything
that refers to it: the features made inside it, its occurrences, the joints
on them with their motion links, joint origins, contact set members, motion
study keys and exploded moves, body component and offset entries, standard
part and link records, and configuration columns. Deleting an inserted
file's feature and component.delete both use it; component.delete now also
removes joints left pointing at a deleted occurrence. The body transfer
refusal moves with it, unchanged.
* Only an inserted file's feature takes its component tree when deleted
Mark the feature a STEP, IGES or mesh insert makes (`inserted`), and remove
the component tree on delete only for those and for a linked design's
feature. Deleting a copied component's independent base deletes just that
feature, as before. Older designs get the mark as they open (pending format
change), except copied components' independent bases.
* claim: #4226
* Esc ends the navigation bar's Pan, Orbit and Zoom modes (#4226)
The nav bar toggled a mode on, but nothing cleared it on Esc, so a left drag
kept panning, orbiting or zooming. Esc now ends an active nav mode first;
the next Esc reaches the tool or dialog as before.
each_frame_hands_the_view_its_motion_through_the_drivers_mapping dropped
the output of a frame it ran (`let _ = ctx.run_ui(...)`). epaint panics
in debug builds when a TexturesDelta is dropped with deltas left ("Dropped
TexturesDelta with 1 unapplied deltas"), so the test failed under a plain
`cargo test` on every platform while the ci profile passed. It now clears
them, as the other UI tests do since #60.
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4380
* "Don't Save" looks like a button in the Save changes prompt (#4380)
The prompt's third action used the kit's low-emphasis text style, so it
didn't read as clickable and people thought Cancel was the only way out.
Add an opt-in secondary_left style to the confirm footer (a framed
secondary button from the theme tokens) and use it for Don't Save.
* Save prompt test: clear each frame's texture delta once it is applied
egui 0.36 panics when a TexturesDelta with unapplied deltas is dropped;
the test kept only the last frame's output and dropped the earlier ones.
* claim: #4440
* Flat Pattern view: draw perforation holes (#4440)
The flat view drew the outline, cut-outs, pockets and bend lines but not
perforation fields, though the flat-pattern data and the DXF export list
their holes. The view now reads the hole centres from the sheet through
SheetBody::perforation_holes, caches them per model state and body, and
draws them as circles in the cut-out style. Holes outside the viewport or
smaller than one pixel are skipped, and the cache is capped at one million
holes.