The Nomad 1f6a2d4daf 3D mouse: driver choice, guided calibration, button mapping and a picture of the device (#1463) (#3825)
* Add a small test boat to steer around with the 3D mouse

A little hull in its own camera, drawn by the UI itself and not the CAD
viewport, so a 3D mouse can be tried out without opening a design. It
brings the model (generated by assets/models/make_test_boat.py) and the
tests for how the camera moves it.

Nothing uses it yet; Preferences picks it up with the rest of the 3D mouse
work.

* UI kit: keep a choice row from flipping with the scrollbar

A choice row picks segments or a dropdown by whether its labels fit. A page
scrollbar that comes and goes narrows the row by its own width, so the row
could flip back and forth between the two on a page that sits right at the
edge. It is now judged on the whole row and through a small helper,
fits_steadily, that only changes its answer once the miss is wider than the
scrollbar.

Also tests for that, for typed numbers in a slider's value box, and a
test hook to put up the issue-report input barrier by hand.

* 3D mouse: device model, guided calibration, buttons and a picture

The 3D mouse becomes a device we know something about instead of six raw
numbers.

The reader picks between spacenavd and the direct hidraw driver, falls back
from one to the other, and says so when it can't open the device. Guided
calibration asks whether the device is a spring cap or a trackball, adds a
touch step, and uses a settle filter so a ball let go of stops reading as
motion. Buttons get jobs (keys, held modifiers, commands), saved per
device, with defaults for the SpaceMouse Pro.

Preferences gets a picture of the device that moves as it does, next to the
test boat, and the same picture can sit in the 3D view at Left Viewport,
Right Viewport or Left Window, above the floating History card like the
legend and readouts.

These ride together because the crate's calibration types, the Preferences
page, the Linux reader and the button hook all use each other.

* 3D mouse: offer to calibrate an uncalibrated device

When a 3D mouse shows up that has not been calibrated, a card in the 3D
view offers to calibrate it, to swap drivers when the other one would work
better, to close, or to never ask again. It is made once per device, goes
away after 30 seconds in view, and gives way to a status or computing
toast instead of stacking on it.

The card is the shared toast, which now takes buttons: they group by
purpose, wrap inside the card at narrow widths, and do nothing while an
issue report holds CAD input. The picture of the device in the 3D view
keeps clear of the card.

* 3D mouse: translations and attribution

The 3D mouse strings (ui.3d_mouse_*, the calibration steps and the offer
card) in every shipped language, the Japanese catalog note, and the credit
for the test boat model in ATTRIBUTION.md.

This is last because the code before it only looks keys up: it builds and
runs without these, falling back to English until they land.

* 3D mouse: draw its preferences with the settings kit like the rest of Navigation

The 3D mouse section was a folded header with its own layout. It now
uses the same kit as the sections above it: a settings_section card,
settings_form rows with the shared label column, dividers between the
device, axes, picture and buttons groups, Text::Hint for the helper
lines, and settings_control_width for the dropdowns.

The section is open like every other one (the header still folds it),
so the device badge on the folded header is gone; the calibration row
already names the device. Every setting, string and key is unchanged.
Tests that unfolded the section no longer click it, and the hint lines
are looked up as hints instead of notes.

* 3D mouse: show each axis's live tilt in Preferences, like main's axis rows

Each view axis row is main's axis row again: a meter that follows the tilt of the motion driving it, with the dead zone marked, next to Invert, Speed and the "driven by" menu. The meter reads the calibrated travel when the device has a calibration and the raw reading over full scale when it does not, and asks for a frame whenever the reading changes. The helpers are back as they are on main, and the calibration state is a badge by the enable toggle.

* 3D mouse: line its preferences up with the rest of Navigation

- The two checkboxes sit side by side in the same two-column grid as Wheel and trackpad.
- Row labels stop repeating "3D mouse" and use sentence case: Calibration, Driver, Restore defaults, Reset view, Left viewport, Right viewport, Left window.
- Hints line up under the control column instead of the left edge.
- The six view axes are named Pan X, Pan Y, Zoom, Orbit X, Orbit Y and Roll so they fit the name column.
- Buttons are a divider and rows in a form like the other groups, without the bold sub-heading.
- The driver, dead zone, axes, picture and buttons sit behind a collapsed Advanced section, since most people never touch them.

* 3D mouse: tidy the Advanced test for clippy
2026-10-24 03:34:21 +00:00
2026-10-23 12:49:05 -04:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft 0.8: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 9× playback. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .solidcraft designs.
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
https://solidcraft.io Readme
501 MiB
0 Stars 1 Watchers 0 Forks
Languages
Rust 97%
Python 2%
WGSL 0.5%
JavaScript 0.3%
Shell 0.1%