* claim: Convert to Sheet Metal keeps a plate where it is
* Convert to Sheet Metal keeps a plate where it is
Converted without bend edges, a plate moved by one thickness: a 100 x 60 x 2
plate on XY came out at z -2..0 picked on its top face, 2..4 picked on its
bottom. The sheet's frame (its base panel's bottom face, thickness along its
normal) was put on the plate's far face facing away from the picked face, so
the material grew out into empty space.
The frame now lies on the picked face with z into the material, as Convert
with bend edges does. The sheet is the old one moved back by the thickness:
same orientation, flat pattern, flange directions and pocket layers.
A test converts the plate from either face and checks its bounding box; the
engraved-plate test now checks the plate's position, not only its thickness.
* claim: #3376
* Fonts: find a Chinese fallback font on Linux and Windows (#3376)
The Chinese fallback was searched for at a few fixed paths, and in the
font folders only on macOS. On Linux and Windows a Chinese font anywhere
else (Fedora's NotoSansCJK-VF.ttc, WenQuanYi under truetype/wqy/, Source
Han Sans, a per-user font) was never found, so a Japanese CJK font drew
the Chinese interface alone and its simplified characters (设, 语, 实)
showed as boxes.
Search the system and per-user font folders on every desktop system,
three folders deep, and take a font only when it draws simplified
Chinese, so a Japanese-only file with a matching name is skipped. The
"sourcehanss" keyword matched no real file; match SourceHanSans* and
SourceHanSerif*, and Noto Serif CJK/SC.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2672
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Chamfer: one pick follows a straight edge's curved tangent chain at any size (#2672)
chamfer_tool built a single-edge cutter for a straight edge even when the
edge runs on tangentially into an arc (a slot side into its end). The
cutter's overshoot (max(2*distance, 1% of the part size)) is probed for
material beyond the edge ends; on a small part the probe hit the arc's
material and the cutter was refused, so the blend followed the whole
chain. Past a bounding-box diagonal of about 200 mm the overshoot cleared
the arc, the cutter was accepted, and only the straight edge was chamfered,
silently.
A straight edge whose smooth chain contains a curved edge no longer gets a
cutter; it takes the chain-following blend, as at small sizes and as a
fillet does.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
The two reliefs that would overlap are still resolved one after the other: the
second one is left out, with a note. The corners come out in flange-index
order, so which of the two keeps its relief depends on the order the flanges
were made in.
Two corners that share an edge never come this far: each relief reaches
exactly r along that edge, and a relief is refused unless 2r fits in it. Two
corners that do not share one can: the square relief at a corner of 120°
reaches 2r from it along the bisector, so at the two 120° corners opposite
each other in a rhombus the two reach each other.
Two reliefs that would overlap are now left out together, each with a note
naming the other, so that which of them is cut does not depend on the order
the flanges were made in.
Fixes#3417.
Co-authored-by: jeremymiribung-blip <jeremymiribung-blip@users.noreply.github.com>
Co-authored-by: Claude Code <noreply@anthropic.com>
* claim: #3267
* fix(view): a finished sketch shows its standalone points (#3267)
Points were drawn only for the sketch being edited, so a point placed for a
hole vanished once the sketch was finished although it could still be picked.
The standalone points of every finished sketch shown are now drawn.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Moving an occurrence places every body under it again, and each placed copy
searched every revolved face for where it sits to turn it away from its seam,
although its source had been turned already. On the Prusa Core One assembly
that search was most of the 12.7 s a move of the top occurrence took. A body
now records that its revolved faces are turned, and world placement
(`place_matrix`) skips the search for such a body. Modelling moves (pattern
copies, hole tools) keep `transform_matrix`, which still turns them in the
copy's own frame: where a face wraps all the way round the turn it finds
depends on those coordinates, and later booleans depend on it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Later instances of a part showed a mesh shared through the first instance,
but the first instance meshed its own, so every repeated part was meshed
twice. The first instance of a part placed more than once now shows the
shared mesh too; a part placed once keeps its own (no second copy).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Autosave serialised and wrote the whole design on the window's thread: about
120 ms on the Prusa Core One assembly (its 61 MB STEP text inside), a hitch
once per interval after every change, and more once saves keep the evaluated
model. A tick now takes a snapshot of the design (its Arc and what is hidden)
and writes it on a worker; a later tick takes up the outcome, and no new write
starts while one runs. Crash replays rebase onto the autosave only when the
design is still the one written. Save and close still wait for the write, and
dropping the autosaver lets a running write end.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3198
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Look At frames the sketch's geometry, not its plane's origin (#3198)
Look At on a sketch (its menu, Ctrl+8, the navigation bar, entering a
sketch) centred the view on the sketch plane's origin and kept the zoom,
so a sketch drawn away from it - an imported part placed far from the
origin - ended up out of view. Both paths now share onto_sketch: centred on
the sketch's bounds, zoomed out when they would not fit (never in); an
empty sketch keeps the plane's origin.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Register the Look At tests
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Look At tests: Vec3::len
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The retries in boolean_whole_inner mesh every candidate to compare its
volume. A nudged union at the coarse tolerance could come out with a face
on a cone whose trim loop ran metres along the cone's continuation (edges
up to 12.7 m outside a 155 mm part); meshing it took seconds to minutes per
face and once never finished, though its volume (+-1e10 mm3) failed the
check anyway.
check() first samples the candidate's edges (16 per edge) and discards a
candidate with a point further outside the operands' mesh box than 5% of
their size (or a non-finite point): no edge of a union, cut or
intersection can lie there. The reason goes into the new
BooleanDiagnostics::rejected (omitted from JSON when empty). Results of
sound candidates are unchanged.
On the reporting design the PitchTail join drops from 18.7 s to 4.3 s with
the same result; the regression tests synthesize a cone face whose loop
runs off its surface.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Spike: typed parameter contracts and JSON Schemas for solid.box and solid.extrude
The schema RFC's spike (plan/schema-spike.md). solid.box and solid.extrude get
typed contracts with generated JSON Schemas (2020-12), checked in front of the
unchanged handlers by a per-session level: off (the default, which changes
nothing), warn (the call runs and gains param_warnings) or strict (the call is
refused and the design left alone). Also engine.describe and the MCP tool
describe_command, `solidcraft-cli mcp --param-check off|warn|strict`, a
FeatureResult type for feature replies, and an env-var audit recorder
(SOLIDCRAFT_PARAM_AUDIT) used to check the contracts against every test.
Local spike branch; not for upstream as is (see the results report).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameter contracts: put the audit recorder behind a feature; drop two ignored test keys
The audit recorder is now on only in a build with the engine's `param-audit` feature
and `SOLIDCRAFT_PARAM_AUDIT` set. Its code is still compiled, linted and tested without
the feature. `scripts/param_audit.py` summarises a test run's audit logs, and the schema
module's docs give the steps for converting a further command.
Two tests passed keys their command ignores, which the audit found: `position` on
`solid.box` (`hole_face_tests.rs`) and `symmetric` on `solid.extrude` (`face_tests.rs`).
Both are removed, so the tests build what they always did. Comments no longer call
the contracts a spike.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
truck placed a face that no intersection divides (every face of a shell
that meets nothing of the other) by counting the faces a ray crosses,
taking each face's surface as stored. A revolved body's reversed faces
counted the wrong way, and an inward shell (a void, a cut's inverted
tool) was read as a solid: a cut beside a sealed void came out empty,
refused or, with a tool whose bounding box covers the target, taken with
the body gone. Intersections of such bodies came out empty as well.
In an AND the crossings now count as each face is oriented, and an
inward shell holds what lies outside it. An OR keeps truck's count.
The corrected cut let a folded offset through: an arc edge next to a
face it meets tangentially had its ends moved past its middle, and the
arc went the long way round (robustness seed 73's shell). The offset
refuses an arc whose middle crossed its chord, as it does a straight
edge that turned round.
Goldens: seeds 0, 45 and 77 had a cut refused as empty that now takes
what it should; their volumes are checked by hand in the PR.
A face pinched to a point, where its boundary touches itself or another of its loops within
TOLERANCE (a sphere touching a box's edge leaves one on the box), had a constraint refused by the
CDT, and the fallback cut across the face: it came out with no triangles or without those at the
pinch. When a constraint is refused, the vendored truck-meshalgo now puts every boundary point
within TOLERANCE of a segment into it (at most 8192) and triangulates the face again. Faces whose
segments all go in mesh as before.
The regression tests live in crates/kernel/src/thin_face_tests.rs, and the #1648 property test in
boolean_props.rs is no longer ignored. Robustness seeds 20 and 55 are recorded with their Linux
values.
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* claim: #2678
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* WIP: timeline.dependents shares the evaluation cache (#2678)
The check before a delete evaluated the edited design on a fresh model:
it recomputed the whole timeline and left nothing for the delete. It now
evaluates on a copy of the session's model. Adds Ahead::replies for
running such checks off the window thread (the UI part is still to come).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Delete: check what a delete breaks off the window thread (#2678)
Both checks a delete makes first (timeline.dependents for the timeline's
Delete, the selection.delete dry run for Delete on the selection) evaluate
the history after the deleted feature, on the window thread. A part with a
slow feature froze the window for as long as everything after it took
(5.9 s in the report). They now compute off the window thread like undo and
the history marker: within the app's 150 ms wait they carry on at once,
otherwise the window says it computes and the delete (or the confirmation)
follows when the report is in. A design changed meanwhile is checked again;
a second Delete meanwhile is left out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ci: run the checks again (the run for 3b94e8e0 was cancelled when the PR left draft)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* kernel: a blend runs along chains of several faces and lines closed rims up (#764)
A blend's chain may run along the boundaries of several faces (a tube's rim
along the halves of its wall): each edge continues from its own best-facing
face, read station by station. Before, a chain had to be the edges of one face,
so every rim of a revolved or cylindrical surface was refused.
Two closed chains blend from matching seams: the second chain's start (searched
by arclength, then narrowed) and direction are the ones that put each station
closest to its partner, so rims whose seams sit apart no longer twist. A
picked `seam` point on each chain fixes the start instead. A closed chain
against an open one is refused. Closed chains leave towards each other's
centroid, not a point on the rim.
Stations are read on the edges' own curves, not on the chords of the length
table (they sat up to the chord's sagitta inside a curved edge), and the
reported gap is measured to the curves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* kernel: closed blend chains run round the same way; Hermite strip and seam tests (#764)
The second of two closed chains runs round the same way as the first (by
their area vectors), so a picked seam turns the blend by just the angle
between the seams instead of folding it over. The nearer pairing decides only
when the loops stand almost at right angles.
Tests for the issue's gates: the blend between two offset box rims is the
analytic cubic Hermite strip (control points from the chord) and keeps the
top faces' normal along both seams; picked seams a quarter apart turn the
blend a quarter round.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* surface.blend: `seam` picks where each chain's stations start (#764)
A point on each chain, saved with the feature (one pending format change),
moved with the design like `align`, and refused when it is not two points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* surface.blend: a test between two tube rims, their seams picked and saved (#764)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Blend dialog: edges at each end, continuity and bulge per end, stitch (#764)
SURFACE › CREATE › Blend Surface opens a dialog: the edges the blend leaves
and the ones it arrives at, each end's continuity (G0–G3) and bulge, and
Stitch to both bodies. Edit Feature brings it back and keeps what the dialog
does not show (align and seam points). Labels in every locale catalog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* ROADMAP: M8 Blend runs along several faces, pairs closed rims and has a dialog (#764)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* kernel: a blend station on the vertex between two support faces is read on the neighbour (#764)
A station where a tube wall's two halves meet sits at a corner of one half's
parameters; with a leave direction that turns round the wall (tubes off each
other's axis) the shape could not be read there and the blend was refused. The
neighbouring chain edge's face holds the same point and reads it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* blend: review clean-ups (#764)
- ChainLine keeps one list of samples instead of four parallel lists.
- frames_on and boundary_gap take the chain's ChainLine instead of rebuilding it.
- A station is read on the neighbouring face only when it sits on the vertex the two edges
share, each face once, and each face keeps its own walk.
- The seam rule (a closed chain starts at it, an open one runs from the nearer end) lives in
ChainLine::start_at_seam; pair_with reuses the start of its both-ways search.
- support_faces projects with curveblend::project; loop_area sits with plane_through.
- surface.blend parses `align` and `seam` through one point_pair; the Blend and Ruled dialogs
share body_and_edges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A cut whose tool ends exactly on a face of the target (a hole cut from a pocket's floor up to the
plate's top face) could come out of the general boolean with the target's face whole over the hole
and the tool's end face under it: a skin of no thickness that keeps the hole closed. No volume
shows it and the sampled membership checks see the hole either way, so the result was kept. The
result check now refuses a body with a planar face lying back to back on another of its own planar
faces with nothing behind part of it (`coplanar::has_skin`), and the retries take the cut.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3254
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preview: nothing is drawn once the current inputs fail (#3254)
The last good preview stayed up when the current inputs made the feature
fail, so the view contradicted the dialog (Extrude at 0 mm still showed
the 1 mm extrusion beside its error). Once the result for the current
inputs is an error, the preview scene is hidden and the bodies it stood
in for come back; while the next preview computes, the last good one
still stays up as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude preview: a zero distance is refused at once (#3254)
The straight extrusion feedback gave up on a zero distance, so the
preview built a whole scratch design only for the kernel to refuse it,
and the old preview hung on until then. It now returns the extrusion's
own error straight away.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Iterate instead of indexing in nine loops
Replace index loops that look up neighbours by position with enumerate,
zip(cycle().skip(1)) for wrap-around pairs and zip(skip(1)) for
consecutive pairs. No behaviour change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: ring_edges for the edges of a closed ring
Every walk over a polygon's edges, the last back to the first, spelled
x.iter().zip(x.iter().cycle().skip(1)); eighteen of them now call
geom::ring_edges. Three redundant take(len) calls go with them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: Ring, a closed ring that knows it is closed
A Ring holds items in order around a closed polygon, loop or fan; edges()
walks each with the next and the last with the first, corners() each
with both neighbours. Ring<Vec2> has signed_area and even-odd contains.
Loop2::polyline returns a Ring, as do doc's face_loops and
boundary_loops, kernel's coplanar wire samples, CapLoop's segments,
tess pieces' rings, the gizmo's plane quads and the navigation cube's
facets. Their walks take edges() or corners() instead of wrapping an
index; sketch's text-hole test and doc's poly_area become contains and
signed_area. Loop2::joints pairs each segment with the next.
Replaces the ring_edges free function.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: Chain, Ring and Path; bounds for a chain of points
Ring becomes Chain<T, Closed> beside Path = Chain<T, Open>: edges()
closes a ring and stops at a path's end, Path::close makes the ring,
and bounds() (the empty box for no points) serves both. Eight
hand-rolled min/max folds over a loop's polyline call bounds(); doc's
flat_polyline returns a Ring.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: area and inside on Ring for any planar point
Ring's signed_area and contains take any Planar point (Vec2 or
[f64; 2]). The cam profile in joints_cam is a Ring: its own even-odd
test goes, and its edge walks, gap and area take edges(). face_params'
loop area, the text path's winding, tess pieces' ring area and the
copies in three tests call signed_area or contains; the formulas are
the same term for term.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* doc: sheet's closed outlines go through Ring
dedup takes and returns a Ring (dropping a last point back on the first
is what makes it a ring's), near_outline walks a Ring's edges, and the
copy of it beside fold checks calls it. point_in goes: its callers ask
the Ring. Its formula anchored each crossing on the other end of the
edge, so the two can differ only for a point on an edge to the last
digit; one caller sets such points aside first, the others test a
region's interior point, a cut's midpoint or another outline's corners.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* doc: cam tests build their outlines with Ring::from
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: area_vector on Ring<Vec3>; three Newell sums use it
Ring<Vec3>::area_vector is half the sum of a × b round the ring. heal's
loop_area, lip's outer-loop turning and the revolve's loop orientation
summed it by hand with a wrapped index; they take it from the Ring
(the half is exact, and two of them only read its sign).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: Aabb3 from points; boxes built and asked through it
Aabb3 collects from points (skipping non-finite ones, as add does) and
gains inflated, contains and meets. Fifteen hand-rolled min/max folds
over points or boxes in kernel, doc and engine become collect or union,
and their "within tol of the box" tests become inflated(tol).contains.
blend's refused-edge boxes and naming's face index hold an Aabb3.
A NaN point is now outside every box, where the old negated
comparisons let it in; an infinite point no longer stretches a box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: Aabb2, the plane's box; 2D folds and box tuples use it
Aabb2 mirrors Aabb3 (collect, add, union, inflated, contains, meets)
and adds relative, a point's place in the box. sketch's link and
link_loops each had that formula; link_loops' boundaries, prism's
segment and loop boxes, profiles' shape boxes and grid, and ends'
segment box hold an Aabb2 instead of a (low, high) pair. Folds in the
cam, sketch bounds, sheet's perforation grid and the sketch clipboard
collect one.
Boxes are built from the same terms (a round's box keeps c - r - tol).
As with Aabb3, a NaN point is outside every box and an infinite point
no longer stretches one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: prism's segment boxes are plain Aabb2s
The SegBox alias named a (low, high) pair; Aabb2 says it itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: Chain::bounds is an Aabb2; the boxes #2382 left as pairs follow
Chain::bounds returns an Aabb2. Its callers keep it: sheet's hole and
cut boxes (loop_box), letter boxes, island outlines and line-near-cut
test use meets, contains and inflated; profile's outline overlap and
max_clearance, profiles' box tests and the cam test read its corners.
flat_size and the flat pattern's JSON size are the union of the loops'
boxes (0 × 0 for no loop, where the pair fold gave -∞).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: Aabb3::intersection; hand-grown and hand-met boxes use the box
Aabb3::intersection is the box both hold. ops' four overlap boxes of a
boolean's operands take it, and seven boxes grown by hand (ops' body
boxes, the distance set's bounds, coplanar's face box, eval_more's
padded mesh box, compare's group and region boxes) call inflated with
the same amount on every side.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
A line and a circle or arc can now be dimensioned to the circle's edge
(ConstraintKind::LineCircleDistance, saved as line_circle_distance): the gap
while the line misses the circle (0 is tangency), or how far the edge reaches
past the line when it cuts through (stored as `inside`).
Rebased onto main as one commit (the branch's own changes; its merges of main
dropped). Conflicts resolved: the test mod lines in cmd/sketch.rs (both kept,
sorted), and README.md, whose feature list main moved to docs/capabilities.md;
the line-to-circle dimension is listed there now.
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Co-authored-by: jyviko <jyviko@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences: a Plugins page lists installed plugin folders
Each folder under the per-user plugins directory that has a plugin.json
appears in Preferences. Turning one off is saved with the other settings.
The page reads the manifest and does not run any code from the folder.
* Retrigger checks after the cancelled run
The required ci check failed because the workflow was cancelled before
any job started. This commit does not change the plugins page.
* claim: #3087
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport: the ground grid is centred where the view's axis meets the ground (#3087)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Grid: its centre stays within reach of the point under the target
At a grazing slant in perspective, where the view's axis meets the
ground runs far off, and the ground in front of the camera had no grid.
The centre now moves no further than the grid's half-size from the
point under the target (review of #3124).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Two empty numerical cut attempts stopped the boolean retry sequence before
the exact geometric strategies ran. When the result guard refuses that empty
candidate, the exact strategies (sliced planar, pushed walls, local prism,
sphere lens, seam halves) now try the cut first; if none recovers it, the
original empty candidate and diagnostics are kept, before any displaced
numerical retry.
Rebased onto main as one commit (the branch's own changes, its merges of main
dropped). The only conflict was the new engine regression test next to
main's #1985 STEP export tests in boolean_regression_tests.rs; both are kept.
* kernel: loft guide rails (#201)
A loft follows one or two guide rails between its sections: stations are added between each two
sections, each the plain loft there moved so that the point a rail guides lands where the rail
crosses the station's plane — turned about the loft's direction and scaled (or stretched across
to the rail) with one rail, carried, turned and sized between two. The sections and caps stay
exact; the smooth loft runs through sections and stations. Solid and sheet lofts.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* doc, engine: solid.loft and surface.loft take guide rails (#201)
`rails` (one or two {sketch, curves}) and `rail_fit` (scale | stretch), stored on Loft and
SurfaceLoft (one pending format note), parsed by the sweep's rail parser (now shared) and built
through the kernel's railed loft. Rails on a loft to a point, or on a surface loft with edge
sections or end continuity, are refused as not supported yet. The rails' sketches are walked as
the feature's references and their components placed like a sweep's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* ui: Rail, Second Rail and Rail Fit in the Loft and Surface Loft dialogs (#201)
The rail inputs and fit row the sweep dialogs have, shared through dialogs_sweep; Edit Feature
brings the rails back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* docs(roadmap): loft guide rails (#201)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* loft rails: review clean-ups (#201)
- Sweep and loft rails share one turn-and-size map (`sweep_path::rail_frame`).
- A station's middle and the loft's direction come from one curve through the sections'
middles (exact derivative) instead of two more plain-loft evaluations per station; at most
33 wires, so railed faces stay light.
- Nearest points on a section use `param_on` (kept only where the search comes nearer); the
size uses `Aabb3`; one B-spline builder; anchors keep their nudge.
- The railed and plain lofts share one path in `loft_with_rails` and `loft_sheet_with_rails`.
- The engine leaves the not-yet-supported refusals to the design's evaluation; both lofts start
their rails from the first section's first point.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* loft rails: refuse rails on sections with holes, with a test (#201)
Main's lofts now take sections with holes (#2447); rails shape only the
outlines, so a railed loft of rings is refused until the rails carry the
holes too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Adjacent \X2\...\X0\ runs, as step_out writes one per character, now
decode: the backslash opening the next run was pushed as a literal, so a
name exported as 圆角 came back as 圆\X2\89D2\X0\ (also every linked
component insert, which round-trips through STEP).
STEP and IGES bytes that are not UTF-8 are decoded in their detected
legacy encoding (chardetng + encoding_rs) instead of from_utf8_lossy, so
GBK or Shift_JIS names from vendor files no longer turn into U+FFFD.
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #2448
* Sketch: a click that moves on the way places its point (#2448)
egui reports a press that moves past its click distance, or is held past its
click time, as a drag, not a click. The viewport only placed points on clicks,
so a hand that moved while clicking placed nothing with the Slot, Line, arc,
three-point, Ellipse, Spline and the other tools, and on the first point of a
Rectangle, Circle or Polygon the few pixels became the press-drag-release
gesture of #1630 and drew a sliver.
- Any tool's press that turns into a drag (no navigation, no Select Other
hold) clicks where the button is let go.
- A Rectangle, Circle or Polygon drag let go within 24 screen points of its
press is such a click too: the first point goes where it was let go and the
shape goes on by clicks. A longer drag still draws the shape (#1630).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Model cache written by default: exact bodies, stored once, scaled caps (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* bench-open: say why bodies were not kept
* Exact planes and revolutions; budgets for large bodies (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Native B-rep: rebuild shells as the kernel made them (closed and seam edges) (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs: the model cache and the exact native B-rep (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* bench-open: time a save without the cache too
* Model cache entries are Deflate-compressed (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Model cache: one that does not fit the design file is left out, never a failed save (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sheet metal: a corner relief no longer depends on the order the corners are cut in
The corner reliefs are planned against the base as it is before any of them is
cut, and the two reliefs at the ends of one edge are compared with each
other. Before, every relief was cut into the base as it went, so the corner
after it saw the relief of the corner before it: the square relief reaches
further from its corner than the round one does (4 / cos(α / 2) against 4), so
on a short edge it was left out where the round one was cut, and which of the
two corners kept its relief depended on the order the flanges were made in.
The reliefs themselves are unchanged: a round about the corner through the
angle the base fills there, or the square with that side (a kite where the
corner is not square, its cuts square to the two edges). What is new is that
they are planned first and cut together, so that a corner's relief depends on
the base and on the other reliefs, and not on the order they are cut in. Two
reliefs that would overlap are still refused, now with a note that says so.
Covered: the four relief shapes at corners of 60° and 120°, with the flanges
of equal and of unequal height, through the kernel and through the engine
(where the flat pattern and the DXF keep one clean loop).
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Sheet metal: cover the corner reliefs at a corner that is not square
The engine and the UI had no test at all for a base whose corners are 60° and
120°: the flat pattern, the DXF, the unfold and the rule manager's own square
relief were all untested there. They work; this says so.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Sheet metal: say what happens when a corner relief is left out
The guide now says that the reliefs at the corners of one edge are cut
together, and that two of them that would overlap leave the second one out.
A relief that cannot be cut is reported, not dropped.
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Sheet metal: write the corner relief's expected corners out
The engine test hard-coded the corners of the trimmed base; it works them out
instead, and the numbers the test and the sketch share are written with the
precision they need.
Co-Authored-By: Claude Code <noreply@anthropic.com>
---------
Co-authored-by: jeremymiribung-blip <jeremymiribung-blip@users.noreply.github.com>
Co-authored-by: Claude Code <noreply@anthropic.com>
Converting an assembly went one occurrence at a time: a part's solid was read
from the file and oriented on the calling thread, and only runs of four or
more solids in one representation used the workers. Each step now takes the
next solids across occurrences and parts (up to 64, stopping where a part not
yet oriented comes back), and the workers read and orient the new parts side
by side, each taking the next one when it is done. Later instances still only
place the part their first instance oriented.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
World placement already shares a part's reference mesh between its
occurrences (#2924), but the display plan the GPU viewport draws was made
again for every occurrence from its placed B-rep: planning every face of
every instance of the part. A placement now carries the definition's plan
cells too, and a placed body's plan (and its CPU mesh) is the definition's,
moved by the placement's matrix (`TessPlan::transformed`): the part is
planned once however often it is placed.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`a_long_message_keeps_the_buttons_in_the_window` failed now and then on CI
(Send 914.5 -> 888.5, also on #2893): looking for agents runs on its own
thread, and what it finds (and the status it reports) can land between the
two measurements and change what is around the panel. The test now waits for
the search to finish and measures the buttons from the panel's bottom, which
is what the box growing upwards keeps fixed.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Save ran on the window's thread: about 130 ms on the Prusa Core One design,
and more than a second once saves keep the evaluated model. The toolbar's
Save and Save As now run the command on a scratch copy of the session on a
worker; the design waits for it as it waits for a file picker (commands are
refused meanwhile), and the outcome is taken up as running the command here
would have left it: the name and links the save gave the design, its file,
its saved state (`Session::adopt_save`), the echo, the error status, the
recent files and the home thumbnail. A tab closing or the app quitting after
Save waits for the write, as does the app's exit. Scripts, the control
channel and the browser build still save in place.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* inspect.clearance: pairs whose bodies did not change are not measured again
Each clearance check measured every close pair again, though between two
checks usually only a few bodies change or move. Results are now kept per pair,
keyed by both bodies' geometry and placement and the check's settings; a pair
whose two bodies are unchanged is taken from that cache. With 40 overlapping
parts, a check after moving one of them took 0.8 s instead of 23 s (741 of 780
pairs reused). Pairs that could not be worked out are tried again each time.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* inspect.clearance: boxes and placed keys exactly as before the reuse
The pair boxes are taken over the mesh's triangles with finite corners, as a
distance shape's are, so pruning is unchanged. A placed body's identity now
includes its model body's own frame, so two placements are never mistaken for
one another.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* inspect.clearance: a large body is meshed once for all its pairs
Each pair that touches cuts the larger body down to the pair's region with a
kernel boolean, and that boolean meshed the whole body twice: once for its
checks and once inside the intersection. A sheet with 600 faces paid about
2.5 s per pair for meshes that were the same every time.
A body can now keep its meshes for reuse (Body::keeping_meshes); its booleans
take the meshes from there, and the intersection takes its shell meshes
from there too (truck-shapeops: and_with_history_meshed). Clearance uses such
copies for one check. Results are unchanged to the bit. On a 3 x 2 m sheet
with bends and 300 holes, the clip took 0.23 s per pair instead of 2.6 s, and
24 rivets took 5.6 s instead of 16.5 s.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* inspect.clearance: pins on one cylinder with their hole are answered or reported in seconds
A pin seated line to line in its hole, on its axis, and with a blend running into its wall
(a fillet under a head) sent the boolean through minutes of retries that ended unchecked; a
pin a hair off its hole's axis was passed as clear. Clearance now asks first whether the pair
holds such a pin (from the faces' surfaces alone). On its axis the boolean gets a few tries,
which answer plain pins at once; a hair off, or when those tries fail, the shared volume is
worked out apart by coaxial_overlap, which now also takes the zero-offset, equal-radius case,
moves the hole's wall when a blend keeps the pin's from moving, and checks its band more
tightly. What neither answers is reported as unchecked, naming the pin.
The kernel gains with_attempt_budget: the booleans run inside it get a number of tries of
the kernel's own intersection between them, the same on every machine.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* inspect.clearance: the pin tests sit beside the other measured pairs, not at the file's end
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* inspect.clearance: the bodies left whole meet their booleans with their meshes kept
A body that meets several others at one size (a bracket with balls pressed into it) was
meshed again for each pair's intersect: only the clipping used the copies that keep their
meshes. The intersect, the pin work and the union check now take those copies too.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* Near-coaxial overlap: ten tries per intersection, enough for a flush head pulled back
#1984's headed pin made before its plate needs more than eight.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Fix large modeled threads and thin crest reconstruction
Helix stations follow the pitch (radial chord error under 1% of it, 48 to
720 stations), and the faceted rebuild retries at the BSP's precision when
the usual weld tolerance collapses a thin crest facet.
Rebased onto main as one commit (the branch's own commits touched UI files
that later moved to #2263 and #2264). Adapted to main's UnitVec3 thread
axis: `*k` in thread_groove and `*cylinder.axis` in the new flange test.
* Fix icon review revisions for same-timestamp edits
* claim: #2430
* feat: copy saved designs between documents as linked components
* fix: keep occurrence movement controls with their document tab
* test: cover linked design clipboard across tabs
* fix: place linked design pastes at the viewport pointer
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
#1949 joined the straight runs of a profile into one side face for straight
extrudes; tapered extrudes (extrude_tapered, extrude_tapered_between) still
sloped each piece as its own face, so a drafted mirrored profile kept the
edge. They now join the runs the same way (NumberedLoop::merged_lines), the
sloped side generated by every piece under it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #2301
* fix: resolve face context actions from persistent face provenance
* test: cover feature targeting from picked faces
* fix: reveal picked face creators in the Browser
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>