Commit Graph
3176 Commits
Author SHA1 Message Date
raykholo 2f43ad5c5b Loft: a circle lofted to a non-star-shaped profile is split once round (#2570) (#3670)
* claim: #2570

* Loft: a circle lofted to a non-star-shaped profile is split once round (#2570)

A circle section was split at the lead section's vertex directions, kept in
the lead's order and forced to increase by whole turns. A non-star-shaped
lead (a C, a comb) turns back on itself, so the circle wound round many
times and closed with a negative arc: self-crossing walls and a huge mesh
(which froze the web build while meshing it).

The circle is now split exactly once round: at the lead's directions when
they go round once in order (clockwise on a plane facing the other way),
otherwise at the lead's perimeter fractions, evenly as the fallback. Every
arc is finite and positive and they total one turn; the unbounded loop is
gone. Section preparation is split out as loft_section_loops so the
resampled sections can be checked.
2026-10-21 00:30:58 +00:00
rlartotandClaude Sonnet 5.5 6a8604c55d Fix lofts through sections turning past 90 degrees (#2847) (#3452)
* claim: #2847

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* loft: keep sections turned past 90 degrees facing the same way (#2847)

The loft oriented each section by the sign of its normal against the first section's, so on planes turning about an axis every section beyond 90 degrees was reversed and the side faces folded. Follow the facing neighbour to neighbour instead.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 00:15:41 +00:00
bherbruckandClaude Opus 5.5 4098ff9dc8 Ribbon: New Sketch on the Sheet Metal tab again; tests for entering and leaving sketches (#3946)
* Ribbon: New Sketch on the Sheet Metal tab again; tests pin sketch enter/exit

Before the ribbon redesign the Sheet Metal tab started with New Sketch. It
gets its own Sketch panel again, like the Model tab's, and a sketch started
there keeps the tab until it opens.

Workspace tests pin the ways into and out of a sketch: New Sketch then a
plane, a double-click in the timeline or the browser, and the browser's Edit
Sketch all open the SKETCH tab looking at the sketch. Finish Sketch from the
palette or the ribbon lands on MODEL with the earlier view back. Escape and
Enter keep the sketch open (#1804), and Undo after Finish reopens it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs: ribbon layout lists Sheet Metal's Sketch panel

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Workspace test: press the keys well apart

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 21:32:48 -04:00
bherbruckandClaude Sonnet 5.5 97383454c6 Browser rows truncate long names with an ellipsis and a tooltip; Solve Sketch is no longer offered in the UI (#3940)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-20 21:32:42 -04:00
bherbruckandClaude Sonnet 5.5 10d7bd045e CI: build and run the tests in one job, sccache on a Blacksmith disk (#3941)
* CI: build and run the tests in one job, sccache on a Blacksmith sticky disk

The tests job compiles and runs the tests itself on the 32 vCPU runner, so a pull request or merge
group uploads and downloads no 3 GB archive (the download took 45 to 385 s per shard, and once
14 minutes) and starts beside the repository checks instead of after them. The archive is built
only for the nightly and manual jobs that need it. sccache moves from GitHub's 10 GB cache, where
about 1100 per-ref entries were evicting each other, to a sticky disk that only main commits.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* TEMP: let this branch save caches so the warm run can be measured

* Revert "TEMP: let this branch save caches so the warm run can be measured"

This reverts commit 1bbbfcf5ff.

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-20 21:25:35 -04:00
bherbruckandClaude Sonnet 5.5 6e87fb1a25 Ribbon: Parameters and Configurations back on Model, Sheet Metal and Sketch; Sheet Metal tab always reachable; Finish Sketch button back in the sketch palette (#3937)
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-20 21:08:04 -04:00
denelson1-dotandClaude Opus 5.5 30e0db1e05 Pattern of a join that merged its targets keeps working (#3378) (#3387)
* claim: #3378

* Pattern and mirror copies of a join that merged its targets join the merged body (#3378)

Since #2755 a pattern or mirror copy of a primitive reuses the seed's targets. When the
seed was a join that merged two targets, the second one no longer exists, so the copies
failed with `unknown body`. The copies now keep the seed targets that are still there;
when none is, the names stay and the error says which body is missing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Rerun CI: the previous run was cancelled before any check ran

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:15:39 +00:00
Dahak BuildsandDahakBuilds 2b1cb2c4e1 MCP batch: rollback restores the original document (#3242) (#3288)
* claim: #3242

* MCP batch: rollback restores the design the batch began in (#3242)

A failed batch with rollback: true reported rolled_back: true even when the
design never went back. Two defects, both fixed:

- file.new (and any document-replacing command) replaced the session with it,
  taking its checkpoints down too, so a batch that failed after file.new had
  nothing to restore. Session::replace_design now carries the checkpoints over
  to the fresh session: the checkpoint belongs to the batch, not to the
  session that happened to be holding the document.
- rolled_back echoed the requested flag. It now reports whether the design is
  actually back: the app answers engine.batch with a new restored field, and
  the MCP tool reports restored && rollback. An app that predates the field
  falls back to undone/completed.

* Batch: answer with main's rolled_back field after the merge (#3242)

Upstream #2900 put the real restore check on engine.batch as
`rolled_back` while this branch named it `restored`; the merge kept
main's control test and this branch's field, and CI caught it.
Standardize on main's wire name: the app answers `rolled_back`, the
MCP tool reads it (fallback for older apps unchanged), docs and tests
follow. The checkpoint carry-over across file.new is unchanged.

---------

Co-authored-by: DahakBuilds <dahakbuilds@users.noreply.github.com>
2026-10-21 00:15:36 +00:00
f815491936 2-tangent circle: start from the touching circle, not the click (#3141) (#3210)
* claim: #3141

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 2-tangent circle: start from the touching circle, not the click (#3141)

The tool passed its second click as the place to start solving, and a
click lies on a curve: the circle began centred on that curve, where its
tangency has no side yet. The solve then moved the user's curves to fit
(a rectangle came out skewed), or failed outright when they were fixed.
The command now starts from the centre, nearest the requested point, of
a circle of that radius touching both curves (where the curves moved by
the radius meet), and the tool asks for the circle between its two clicks.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:15:34 +00:00
rlartotandClaude Sonnet 5.5 a595805fc8 Sketch: symmetry about a line pairs line ends by mirror image (#2961, #2940) (#3029)
* claim: #2961

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* Tests: symmetry about a line keeps rectangle sides' height (#2961, #2940)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

* Sketch: symmetry about a line pairs line ends by mirror image (#2961, #2940)

c_symmetry paired the ends of two lines by index. Opposite sides of a
rectangle run in opposite directions, so that forced both heights to 0
(or was refused when a side had a length). Pair each end with the end
of the other line nearest its mirror image, as symmetry about a point does.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01X2qZQXd3qSwu9mzaYcB9yW

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 00:15:32 +00:00
bherbruckandClaude Opus 5.5 0379ee76c6 CI: spread the slowest tests across the test shards (#3646)
* CI: give the slowest tests a shard each

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CI: spread the slow tests on pull requests too, and keep both junit files

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CI: pull requests skip the goldens and the action matrix sample unless the kernel changes

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Docs: which pull requests run the goldens

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CI: run the tests in one job on a big runner, slowest first

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* CI: allow the 32 vCPU runner label in actionlint, read junit.xml in the golden hint

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 20:41:58 -04:00
plexi32andClaude Opus 5.5 4f7ff8c4d8 Move: Point to Point takes the origin point (#3696) (#3718)
The origin point was drawn in the view and listed in the browser, but
nothing could pick it: the viewport never offered it as a hit and the
browser's O row had no selection. A new ORIGIN accept bit lets an input
take it as a vertex of no body; Move's point inputs (From, To, Point,
Pivot) accept it, from the view or the browser's Origin folder.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:13:59 +00:00
bherbruckandClaude Opus 5.5 d2188fb7ab IGES import: a B-spline curve over a tiny knot span keeps its faces (#3885) (#3886)
A curve written over a knot span of 1e-7 or less was refused on the STEP side
("knot vector consists single value"), and both faces it bounds were lost. Its
knots are moved and scaled onto (0, 1), which leaves its shape as it is.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:13:28 +00:00
bherbruckandClaude Opus 5.5 438abbcf82 STEP conformance sweep: the cones to a point read right now (#258) (#3901)
cone_point and cone_point_vertex join the sweep now that #3871 reads a cone
bounded only by its base circle up to its point.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:03:46 +00:00
Christian SvenssonandClaude Opus 5.5 079a600481 Recovery: autosave every open design tab (#2884) (#2952)
* Fix recovery for unsaved background tabs (#2884)

* Recovery: scheduled autosaves of every tab write on the worker thread (#2884)

After #3139, Autosaver::save waits for the write and Autosaver::tick runs
it on a worker. The scheduled path now goes through tick (which skips a
tab whose previous write is still running), so several dirty tabs no
longer write on the window thread each interval (#3044). save stays for
Save, close and shutdown. Each tab's autosaver has no clock of its own:
the shared cadence decides when it is due. The tests wait for the
writes a tick started.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Recovery: closing a tab waits for its running autosave before removing the entry (#2884)

With the autosave on a worker thread, discard could remove the files and
the lock while a write was still running; the write then recreated the
entry without a lock, and the next launch offered a design closed with
Don't Save. discard now ends the running write first, as Drop does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 23:58:05 +00:00
bherbruckandClaude Opus 5.5 94bd8719aa STEP import: a void reads as a cavity whichever way its shell flag points (#3730) (#3872)
A BREP_WITH_VOIDS void's faces face into the cavity, so it encloses volume of
the opposite sign to the outer shell. Its ORIENTED_CLOSED_SHELL flag alone
doesn't tell: SOLIDWORKS writes .F. over a shell already facing into the
cavity, SolidCraft .T., and flipping by the flag added the cavity's volume. A
void enclosing volume of the outer shell's sign is now turned inside out.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 23:54:54 +00:00
bherbruckandClaude Opus 5.5 fc3dedfd5c STEP import: regression sweep over the step-conformance parts of known shape (#3880)
* STEP import: regression sweep over the step-conformance parts of known shape

Fifteen generated parts from step-conformance (CC0): plain, NURBS, seamed,
placed, inch and far-away cylinders, domes, a grooved shaft, a plate with 100
holes, a 3.6 m disc, a 0.5 mm pin, a B-spline half-torus and a washer. Each
reads back with its exact volume, its box and its face count. The half-torus
on a TOROIDAL_SURFACE and the cones to a point are left out until they read
right.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* STEP conformance sweep: the pin's volume as FRAC_PI_8 (clippy)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 23:07:47 +00:00
bherbruck 41a62d210c File menu: Export STL… and Export 3MF… open the mesh dialog with that format; command search finds mesh export by format (#3873) 2026-10-20 22:43:30 +00:00
bherbruckandClaude Opus 5.5 5638259737 STEP import: a cone bounded only by its base circle reaches its point (#258) (#3871)
A cone face written with no vertex at its point has the base circle as its only
loop (or that circle and a VERTEX_LOOP at the point, which has no edges). Its
surface was spanned over the circle alone, a sliver, so a solid cone came in as
a flat disc. Such a face is now spanned to the apex, and its circle is joined to
the apex by a seam line out and back, as a cone with a seam is written.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 22:35:12 +00:00
NOWN-DEVandClaude Opus 5.5 090119a5c5 Boolean: a small hole in a large body's face stays a hole when the face is divided (#2579) (#2580)
* Boolean: a small hole in a large body's face stays a hole when the face is divided

A boolean divides faces at a tolerance that follows the larger operand (a few
millimetres on a part a few metres long). A small hole's rim, two half circles
when read from STEP, then became two chords: its polygon in the face's
parameters had no area, and the sign that tells a hole from a face piece came
out at random. The hole became a face of its own, inside out, and the face it
was cut in stayed whole. A box cut round such a hole gave a piece without it,
and the shared part of that piece and a pin in the hole came out negative
("malformed") or the boolean failed.

divide_face now divides a loop whose polygon is flat again, finer (down to a
hundredth of the loop's own size), before reading its sign. Only the polygon
that places the loop changes; loops that have an area are untouched.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Kernel: the long-plate hole test in tests.rs; a flat loop's size from its box

Review: the test moves into the kernel's test file (no file of its own),
and finer_if_flat takes the loop's size from the diagonal of the box round
its sample points instead of the largest distance between any two.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 21:56:33 +00:00
bherbruckandClaude Opus 5.5 522ae77556 Release 0.18.1 (#3851)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 17:33:29 -04:00
raykholo 5ba8c815a6 IGES import: trim curves with reversed pieces no longer drop their faces (#3358) (#3359)
* claim: #3358

* IGES import: trim curves with reversed pieces no longer drop their faces

A curve on a surface (142) gives each trim loop twice: B in the surface's
parameter space and C in model space, running the same way. Some exporters
write C as a composite curve (102) whose pieces are in order but some of
them end to start. The reader passed those pieces on as they were, so the
loop did not close and the STEP reader left the face out ("face boundary is
not a closed loop").

The pieces of C are now turned to run head to tail, starting at S(B(start)),
the point where the parameter-space curve begins on the surface. That keeps
the loop's sense from the file, so holes still run against the outer loop.
A piece whose ends are one vertex at the sewing tolerance keeps its
direction.

On a 9,276-face trimmed-surface car model, 7,887 faces now import instead
of 3,882.
2026-10-20 17:32:48 -04:00
bherbruck cb1b230732 Add Dutch, Swedish, Traditional Chinese, Indonesian, Romanian and Hungarian (#3826)
The new catalogs are machine translated; native speakers, corrections are very welcome.
2026-10-20 17:32:44 -04:00
bherbruck 6e22e3709d Web: reopen designs saved on the computer from the recent list after a reload; forget stale remembered files (#104) (#3834) 2026-10-20 17:32:36 -04:00
Krzysztof HeimandKrzysztof Heim 1b84ce6330 fix: skip impossible drags of determined sketch geometry (#2006) (#2199)
Co-authored-by: Krzysztof Heim <krzysztof.heim@b4bridge.com>
2026-10-20 20:56:50 +00:00
bherbruck 687caad24c IGES import: a revolved arc is a cap, not a whole sphere (#3806) (#3813)
A surface of revolution (120) wrote its arc generatrix as a whole STEP circle, which
turns into a whole sphere twice over when the arc is centred on the axis; the trim could
not pick the cap out of it and the face meshed as the full ball. An arc in a plane through
the axis now comes in as a sphere or torus, any other arc as an exact rational B-spline of
just the arc.
2026-10-20 20:56:35 +00:00
bherbruckandClaude Opus 5.5 7e05c8b23c Hovering a long helical edge no longer freezes (#3745) (#3818)
Hovering an edge lights its circular rim, which starts from the edge's
tangent chain. That looked at every edge of the mesh for each edge in the
chain (and searched the chain itself each time), so a long helical edge in
many pieces, a thread's crest, took seconds: 7.6 s inside the frame on the
first hover of the stem's thread in a real watch-movement STEP file. The
edges are now found by the grid cells of their ends, two join tolerances
across, so each step looks only at the edges that end near it: the same chain
in the same order, in 29 ms for that thread.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 17:08:50 -04:00
7dfbaf2a2c Parameter autocomplete matches anywhere in the name, prefix matches first (#2757) (#2849)
* claim: #2757

* fix(params): autocomplete offers a parameter for any part of its name (#2757)

Typing `side` now offers `cab_side_thickness`: parameters match the word
anywhere in their name, after those that start with it, both in the expression
boxes and in parameters.complete. Functions, constants and units still match
from the start.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 20:39:14 +00:00
1e0e8f78dc Shift+R repeats the last tool or dialog (#3045) (#3160)
* claim: #3045

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Shift+R repeats the last tool or dialog (#3045)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 20:29:22 +00:00
bherbruckandClaude Opus 5.5 c3151fb7fe Release 0.18.0 (#3792)
Version 0.18.0; no pending design format changes, so it writes format 28 like 0.17.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 16:28:46 -04:00
bherbruck a9aab13d92 Translations: complete Ukrainian, French, Danish (#3802)
The added strings are machine translated; native speakers, corrections are very welcome.
2026-10-20 16:28:31 -04:00
bherbruck 6235295ba6 Translations: complete Czech, Italian, Vietnamese, Spanish (#3801)
The added strings are machine translated; native speakers, corrections are very welcome.
2026-10-20 16:28:27 -04:00
bherbruck 51e2f0a34b Translations: complete Malay, Brazilian Portuguese, Polish, Galician (#3800)
The added strings are machine translated; native speakers, corrections are very welcome.
2026-10-20 16:28:22 -04:00
bherbruck 0191e3e157 Translations: complete Russian, Korean, German, Turkish (#3799)
The added strings are machine translated; native speakers, corrections are very welcome.
2026-10-20 16:28:17 -04:00
bherbruckandClaude Opus 5.5 754eb56e5b perf: hovering a large body never waits for its pick index or plan mesh (#3745) (#3766)
The first hover over a large body made two things in the frame: the body's
pick index (its triangles and edges in hierarchies; about 0.3 s for a long
modelled thread, a quarter of a million triangles) and, with the GPU viewport,
the plan mesh a highlighted face is drawn from (about 0.7 s for the same
thread). The window froze for the sum.

A large mesh's pick index is now made on a worker, and picks scan the mesh
until it is there (a few milliseconds); a body's plan mesh is made on a worker
too (`ModelBody::plan_mesh_soon`), and until it is there the hovered face is
lit on the mesh the viewport already has. Small meshes, and the browser build,
make both at once as before.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 16:28:11 -04:00
github-actions[bot] 9d04e28b51 Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] 2026-10-20 20:21:42 +00:00
bherbruck 8e77d9fd85 Merge pull request #3627 from Nathan-Dane/ui/icon-accents
UI redesign stack: floating workspace, shared controls, search and icon accents
2026-10-20 16:16:24 -04:00
Nathan Dane c78095ccde Fix UI stack integration after rebasing on main 2026-10-20 21:50:22 +02:00
Nathan Dane 6decbf407f Command search: concentric corner radii, a wider closed field with tighter spacing 2026-10-20 21:01:32 +02:00
Nathan Dane 6f521991c7 Command search: the closed ribbon field keeps its original size; the I-beam cursor over it 2026-10-20 21:01:32 +02:00
Nathan Dane 6c9ddc2528 Command search: the ribbon field animates into the search field; the footer fills the sheet edge to edge 2026-10-20 21:01:32 +02:00
Nathan Dane 41f5957d60 Icons keep their multi-tone artwork: tone accents for confirm, menu and radial glyphs 2026-10-20 21:01:32 +02:00
Nathan Dane d45fcce72c Command search popup on the UI kit; the bottom command line is gone 2026-10-20 21:01:32 +02:00
Nathan Dane a3e2fe25bb Context menus, radial menu and rename popover on the UI kit 2026-10-20 21:01:25 +02:00
Nathan Dane 57aad71bbe Window frame with page list and the confirm dialog on the UI kit 2026-10-20 21:01:25 +02:00
Nathan Dane f2eaead594 Per-tab accent tokens: fill, ink and tint for every tab, with a contrast guard 2026-10-20 21:01:25 +02:00
Nathan Dane a5e0fe3ec4 Parameters, Configuration Table, Crash Reports and Appearance redesign (step 8 of #2016, after the cleanup PR) 2026-10-20 21:01:25 +02:00
Nathan Dane dad56187df Cleanup after the popup move (step 7 of #2016, after the panels PR) 2026-10-20 21:01:18 +02:00
Nathan Dane 7026248e25 Every popup and panel on the UI library (step 6 of #2016, after the library PR) 2026-10-20 21:01:11 +02:00
Nathan Dane 1122cd44b8 UI library, tokens, fonts and icons (step 5 of #2016, after #2287) 2026-10-20 21:00:56 +02:00