Commit Graph
3176 Commits
Author SHA1 Message Date
Nathan Dane 837dbe66df Compass and viewport overlays (step 4 of #2016, rebased onto step 3) 2026-10-20 21:00:50 +02:00
Nathan Dane 845edeba5f Floating browser card and history strip (step 3 of #2016, rebased onto step 2) 2026-10-20 21:00:50 +02:00
Nathan Dane c2e3bdfe1c Floating shell frame: workspace and ribbon cards over a full-bleed viewport (step 2 of #2016, rebased onto #2176) 2026-10-20 21:00:50 +02:00
Nathan Daneandbherbruck a0c1a67220 Application bar and ribbon redesign (step 1 of #2016) (#2176)
* ui: spacing, radius and type tokens, per-tab accents, agent and on-accent tokens

* ui: per-tab accent behaviour and a larger application bar with a Start page button

* icons: silhouette master and flat assistant and agent link icons (open for review)

* icons: apply review notes (sparkle assistant, refined plug, silhouette halo)

* icons: wire the silhouette master to inspect.silhouette; record the accepted icons

* ui: application bar to the design: separators, Save, house, assistant icon, readable hovers

* ui: ribbon structure: Model to View tabs, contextual Sketch and Sheet Metal, migrated pins

* ui: ribbon painting to the compact design

* ui: smaller icon button highlight and assistant mark on the bubble corner

* ui: short ribbon labels that wrap at spaces

* ui: ribbon buttons fit their labels and Finish Sketch shows its full name

* ui: constraint gallery, workspace menu, section list headings and richer tooltips

* ui: lighter selected tab label, ribbon surface and dimmer bar separators match the dark design

* ui: document tabs as rounded chips with a dimmer inactive label

* ui: document tabs fit their names and show close only when active or hovered

* icons: close and plus masters for the document tabs (open for review)

* ui: centre the new-tab plus and overflow button on the bar

* ui: a quiet rule under the ribbon tabs on non-contextual tabs

* ui: the application bar mark separates its faces with the bar colour, not white

* ui: open ribbon section label uses the selected tint and a chevron

* ui: dim the tab close and plus icons until hovered

* ui: every ribbon dropdown uses the chevron, the workspace card included

* ui: the active document tab uses the design's surface colour

* ui: the bug button's right padding mirrors its icon side

* ui: square constraint cells and a rule before the grid

* ui: constraint cells back to their earlier size, keeping the rule

* ui: smaller constraint cells and icons, centred in the section

* ui: constraint cells fit the height of the large buttons' icon and label

* ui: sketch Create titles share the other labels' line

* ui: format the application bar and ribbon changes

* ui: active tab surface token and the colour and hover tests that follow the redesign

* tests: the merged parameter and narrow toolbar tests follow the compact ribbon

* i18n: the Malay Gap label has an English source and its Japanese and Chinese translations

* apply_off_thread tests: the evaluation lingers in tests, so still computing never depends on machine speed

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 17:23:49 +00:00
bherbruck 3606d44ad9 README: Trendshift Rust badge next to the overall one (#3714) 2026-10-20 14:20:13 -04:00
bherbruck 20a0d3b2e4 README: Trendshift badge (#3706) 2026-10-20 14:13:53 -04:00
bherbruckandClaude Opus 5.5 5d9ebe9911 Renaming a feature no longer rebuilds the design (#3044) (#3097)
* perf: renaming a feature evaluates nothing (#3044)

A feature's name labels it and builds nothing, but a timeline rename evaluated
the whole design again (about 70 s on the Prusa Core One assembly, and again
for undo). When the only change is one feature's name, the model renames its
result, sketch and construction geometry in place and takes the renamed
design's fingerprints. A rename other features follow (a plane a sketch is on)
or of a failed feature still evaluates the design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Guard cheap commands on designs with thousands of bodies, plus a scaling bench (#3044) (#3121)

Cheap commands stay cheap on designs with thousands of bodies, with a scaling bench.

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:08:59 -04:00
bherbruck 76af4ee855 Web: Save to computer… for designs kept in the browser; OPFS writes route as before (#104) (#3687) 2026-10-20 13:51:01 -04:00
bherbruck b2168435ba Web: save to and open from files on your computer (#104) (#3681)
Save As and Open use the browser's file dialogs where the File System Access API exists; Save writes back to the same file, its handle kept in IndexedDB across reloads. File > Download design added. Other browsers keep storing designs in OPFS.
2026-10-20 13:39:55 -04:00
SS-ENandClaude Opus 5.5 34afcf75c1 Joints: a loop that meets only to within nanometres still moves (#3475)
A closed loop whose joints meet a few nanometres apart along their parallel
axes (faces modelled that far apart) passes the conflict check, but the loop
solver wanted 1e-7 mm before it moved anything. No value of a planar loop
takes such a gap out, so every drive of it stopped at once (stopped_by_loop,
fraction 0) and joint.reach called the loop open.

The solver now closes such a loop as far as it comes and, when what is left
is within the conflict check, keeps it that closed on the way. joint.drive,
joint.reach and the nearby pose of the dof count share it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 16:41:37 +00:00
932d8d6b4f Tessellation: trimmed faces of display meshes stay on their surfaces (#1653)
* Tessellation: trimmed faces of display meshes stay on their surfaces

Display meshes triangulate a trimmed face in parameters scaled by the
surface's speed along each, so a strip stretched along one parameter is
not fanned across, and every boundary segment stays a constraint: one that
crosses another is split where they meet. Boolean meshes keep truck's way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Tessellation: one boundary rule for every mesh; drop the #1648 retry

A boundary segment that crosses one already added is split where they
meet in Boolean meshes too, which keeps a pinched face (#1648) whole
without the snap-and-retry. Faces whose segments all go in mesh as
before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Robustness goldens: seeds 1, 23, 55, 64 and 86 re-recorded on current main for #1653

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

* Thread preview test: wait for the stale fit error to clear before the next preview

After switching back from M6x1.3 to M8x1.3, wait_feature_preview stopped at the M6 error still on
screen when the new preview started a few frames later (seen on Linux CI with #1653's meshing).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

* Robustness goldens: the slow seeds 14, 20 and 40 re-recorded for #1653 from the merge queue

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 16:49:45 +00:00
fkirill fb87cde6a1 Sketch: persist Shift-picked midpoints with ordinary constraints (#2087) (#2378) 2026-10-20 16:26:19 +00:00
Victor Santos Oliveira 5305d7c82d Clarify delayed detection in unclean-exit reports (#3640) 2026-10-20 16:05:55 +00:00
Colin Faulkingham 59cd55f531 Sketch: keep three-point arcs attached to the through point (#2166) (#3610)
* claim: #2166

* Fix three-point arc through-point attachments (#2166)
2026-10-20 15:55:58 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 2668518079 Section Analysis: dragging the cut stays smooth on large parts (#3616)
On an imported part with 2.5 million triangles, every frame of a Section
Analysis drag looked up the picked face's plane several times (each lookup
tessellates the whole body, about 0.1 s) and cut every triangle again for
the outline (38 ms).

- planar_face keeps its last answers for the model state they were found in.
- The outline cuts through a SectionIndex: the mesh's triangles sorted into
  slabs along the cut's normal, kept per mesh while the normal stays, so a
  cut looks at one slab (0.06 ms on that part) and finds the same segments.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 15:54:04 +00:00
rlartotandClaude Sonnet 5.5 e29a57dc3a inspect.interference/clearance: list mesh bodies as unchecked (#3249) (#3258)
* claim: #3249

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* inspect.interference/clearance: list mesh bodies as unchecked

Mesh bodies (STL, 3MF and OBJ imports) were filtered out before any pair
was formed, so two overlapping STL imports reported count 0 and an empty
unchecked list, which reads as "no collision". Each mesh body is now
listed in `unchecked` as {a: name, b: null, reason: "mesh body: not
checked"} by both commands. inspect.clearance also stops refusing a mesh
body named in `bodies` or `against` as "no solid body"; it is listed
instead. The parameter docs and the assemblies guide say so.

Fixes #3249

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* docs: separate the mesh-body note from the paragraph above

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-20 15:42:39 +00:00
JakobonlyandClaude Opus 5.5 23b0120759 Sketch: a radius dimension past an arc's end extends the arc to its arrow (#3393) (#3408)
* claim: #3393

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

* Sketch: a radius dimension past an arc's end extends the arc to its arrow (#3393)

A radius or diameter dimension on an arc whose leader is dragged past the arc's
ends had its arrow pointing at empty space. The radial frame now keeps the arc's
span, and an arrow outside it gets the arc continued from the nearer end round
to the arrow tip and a little past it, as dimension drawings do. Full circles,
ellipses and arrows on the arc are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 15:40:26 +00:00
SS-ENandClaude Opus 5.5 76b17f2663 sketch(feat): a click on another dimension inserts its name into the value being edited (#3186)
While editing a dimension's value, a single click on another driving
dimension now inserts its parameter name (a double-click no longer needed,
and its second click does not insert it twice). A lone value such as `10`
or `10 mm` is replaced by the name; an expression in progress keeps what
was typed and gets the name at the cursor (replacing selected text), so
`10 + ` becomes `10 + d10`. The cursor ends after the name and the field
keeps the keyboard.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 15:32:07 +00:00
83790139b1 Editing a sketch past the history marker rolls the marker to it (#2716) (#3339)
* claim: #2716

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Editing a sketch past the history marker rolls the marker to it (#2716)

Edit Sketch rolled the timeline back to just after the sketch only when
the marker was later. With the marker before the sketch it stayed there:
the sketch wasn't built, so it opened with no palette and couldn't be
edited. The marker now moves to just after the sketch either way, and
Finish Sketch puts it back as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 15:28:52 +00:00
Dahak BuildsandDahakBuilds 7bda28e786 Contact: a check finds bodies crossing face to face, not only a corner inside (#3323) (#3388)
* claim: #3323

* Contact: a check finds bodies crossing face to face, not only a corner inside (#3323)

The collision probe sampled each tessellation's points (vertices, edge
midpoints, triangle centres) against the other body, so plates crossing
face to face - where the crossing strip is smaller than a face triangle -
put no sample point inside and went unreported while inspect.interference
found the overlap. Where an edge of one body passes through the other's
surface, the middle of the chord it cuts lies inside; its distance from
that surface is the depth. Touching and grazing are unchanged. The sweep's
collision work model pays for the added edge pass.

---------

Co-authored-by: DahakBuilds <dahakbuilds@users.noreply.github.com>
2026-10-20 15:21:17 +00:00
JakobonlyandClaude Opus 5.5 2f5f65d6e3 Sketch: an angle dimension between two lines from one point measures the angle between them (#2724) (#3439)
* claim: #2724

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

* Sketch: an angle between two lines from one point measures the angle between them (#2724)

An angle dimension on two lines that share an end (two radii of a circle, the
two sides of a corner) took the acute reading of the lines' directions, so
radii 120° apart measured 60° and 150° apart 30°. With no text position given,
the angle is now measured from the shared end towards the lines' other ends,
the reading anyone would mean; the supplement stays the alternative reading.
Lines that share no end, and dimensions placed with a text position, are
unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

* ci: re-run the checks; the run on the last push was cancelled

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:51:06 +00:00
bherbruckandClaude Opus 5.5 9e78e86b92 perf: renaming a body evaluates nothing (#3044) (#3095)
A body rename changes names only, but committing it went through the general
"design changed" path: the whole timeline was evaluated again. On an imported
assembly that means reading the STEP file again and meshing every body (about
100 s on the Prusa Core One, and the same again for undo).

When the only change from the previous design is one body rename (the
features' stored body names and the body-keyed maps the rename updates), the
model now renames the body in its results instead: every body keeps its
geometry and meshes, and the fingerprints are set to the renamed design's so
the next evaluation reuses everything. Undo and redo of the rename take the
same path. A rename the model can't follow that way (the body is changed or
named by a later feature, sheet metal, threads) still evaluates the design as
before.

`bench-open --ops script.json` times commands and their undo on an opened
design, with the view work each leaves.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 12:18:40 -04:00
Christian Svensson 511faedcfa Fix OpenGL startup with portable AO depth reads (#2888) (#2933)
* claim: #2888

* fix: preserve AO depth in a portable integer texture (#2888)
2026-10-20 11:41:40 -04:00
bherbruckandClaude Opus 5.5 c5129a45d7 Release 0.17.0 (#3629)
Version 0.17.0; design format 28 fixed (13 pending changes folded).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 11:41:10 -04:00
bherbruckandClaude Opus 5.5 db75b7bfac Make the off-thread OK test deterministic (#3622)
The test could lose a race: with a zero wait the evaluation sometimes finished and applied
before the check that the dialog was still computing. The evaluation is now held at a test
gate until the dialog has been seen saying so.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 11:18:32 -04:00
amolinari-autotex 4dcca282da claim: #3245 (#3246) 2026-10-20 14:36:04 +00:00
bherbruckandClaude Opus 5.5 e98e065584 Open saved designs from the model they were saved with (#3053) (#3102)
* WIP: adopt the saved model on open (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* WIP: tests

* WIP: bench-open opens as Open does

* docs: opening from the saved model

* Tests: an edit after opening evaluates from the feature it changes

* clippy

* Read SOLIDCRAFT_NO_MODEL_CACHE through the env helper

* Open: no picture from the model when the model itself opens; cancel test evaluates

* Saved model: bodies passed through found without writing their record; states list runs of bodies

* Adopted results go into the evaluation cache: an undone edit, or the marker rolled forward, takes them again

* Model cache size guard: the saved model's writer

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:24:34 +00:00
github-actions[bot] af32243df1 Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] 2026-10-20 14:48:16 +00:00
rlartotandClaude Sonnet 5.5 885d2aafbb sketch.create: reject a non-numeric custom plane origin (#3248) (#3252)
* claim: #3248

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* sketch.create: reject a custom plane origin that is not three numbers

A custom plane {origin, x_dir, y_dir} whose origin was given as an
expression ("w/2") or a number with a unit ("20 mm") silently became
[0, 0, 0], while a bad x_dir or y_dir was an error. A missing origin is
still the world origin; one that is present but is not three numbers now
returns a clear error. Expressions are not evaluated, so the saved
format is unchanged.

Fixes #3248

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-20 14:24:18 +00:00
SS-ENandClaude Opus 5.5 c7bd467be7 joint.inspect: show agents what each joint is attached to (#3453)
* joint.inspect: what each joint is attached to, for agents

A read-only `joint.inspect {joint?}` gives each joint's definition: for each
side the occurrence, its component and path, the snap as saved, and what
each persistent face/edge name refers to (the feature that made it, and the
sketch and curve a swept side came from), whether the origin resolves and
why not; plus kind, offset, angle, flip, values with limits, expressions,
the motion links it is in, and its solve errors and conflicts. Its id ends
in `.inspect`, so agent gates treat it as reading only.

MCP `inspect_design` includes the definitions when the design has joints
(`joints: false` leaves them out). joint.list and joint.inspect share the
motion-link JSON.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* i18n: catalog entries for Inspect Joint (en, ja, zh)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:21:54 +00:00
SS-ENandClaude Opus 5.5 fb811fbf21 Sketch trim: drag a path across curves to trim every piece it crosses (#3182)
`sketch.trim.path {points, dry_run?}` walks a polyline and, at each place it
crosses a curve trim may change, removes that piece exactly as `sketch.trim`
would there, in the order crossed and in one undo step. A piece already gone
is not trimmed again; projected geometry, infinite lines, offset outputs and
pieces trim refuses are passed over (reported in `skipped`). It returns each
trim's result and each removed piece as a polyline; `dry_run` reports them
without changing the design.

With Trim on, a press and drag in the viewport draws that path: the pieces it
would remove light up (a dry run of the command) and letting go runs it. A
click still trims the one piece under it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:20:12 +00:00
takuto-NAandbherbruck 843c0bf97a Reduce repeated sketch diagnostics and enable normal-CI profiling regressions (#2355) (#2359)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 13:55:25 +00:00
50da77abc4 CI: a run another label starts reports the commit's real result as ci (#3596)
The merge queue reads the required ci check from the newest run of a commit. Adding any label but
approved-for-ci starts a run whose jobs all skip, and its ci job was skipped too (as
'ci (ignored label)'), so a pull request that had passed could not enter the queue (#1850, #3182,
#3252). On such a run the ci job now waits for the commit's other runs to finish and passes only
when the newest one that ran its checks passed.


Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:09:49 +00:00
rlartotandClaude Sonnet 5.5 95de388ba1 Sheet metal: refuse an edge flange on a bend line (#3234) (#3273)
* claim: #3234

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sheet metal: refuse an edge flange on a flange's bend line (#3234)

A pick on the edge where a bend meets the plate (or the flange panel)
found a panel edge that is already a bend line and made a second flange
on it, leaving a gap and a sheet of two shells. add_flanges_each now
refuses such an edge before anything moves.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-20 12:46:10 +00:00
takuto-NA d8eb65d26e Make constrained sketch edges follow the cursor (#3360) (#3362)
* claim: #3360

* Fix constrained sketch edge following and final drag coordinates
2026-10-20 12:43:59 +00:00
cronosandRay 7c6845da95 Paste: the file-link test builds proper file URLs on Windows too (#3348) (#3494)
The test turned a temp path into a link with `file://` + the path, which on
Windows gives `file://C:\Users\...`, not a file URL, so the test failed there.
It now builds `file:///C:/Users/.../my%20part.stl` on Windows (what Explorer
and browsers put on the clipboard) and `file:///tmp/...` on Linux and macOS,
as before. `files_in_text` already reads Windows file URLs correctly; the
fixed test now checks that on Windows.

Co-authored-by: Ray <raykholo@users.noreply.github.com>
2026-10-20 12:42:43 +00:00
SS-ENandClaude Opus 5.5 9c26f6dbc9 Agent cursor: bound the show per request; run engine.batch while shown (#2900)
Every engine.execute was acted out stop by stop (0.45 s glide + 0.25 s click
per toolbar button and per on-screen point), so a 720-point sketch.line took
minutes while the app answered no other control request. Now the pointer
visits the toolbar button and at most three picks (a long point list is
summarised by its first, middle and last point on screen), and a request is
acted out within 1.5 s whatever its size (the legs get shorter).

engine.batch is no longer refused while the cursor is shown: the pointer acts
out a short summary (the toolbar buttons of up to four of its distinct
commands, within the same budget), then the whole batch runs in one request.
A failed engine.batch now says whether the design really went back
(rolled_back).


(cherry picked from commit 55535e01af45cc9ee7555320863ff5ddcd7c151f)

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 12:41:05 +00:00
shop-3d 2061ad1694 i18n: add missing Danish translations (#3028)
* i18n: add Danish (da) UI translation

* i18n: refine Danish part properties wording

* i18n: sort Danish catalog in canonical key order
2026-10-20 12:39:11 +00:00
Lucas Montenegro Carvalhaes e37a8fa6bb Fillet: skip smooth seams in tangent chain and restore picked edges when unticked (#3370) (#3437)
* claim: #3370

* fillet: stop tangent chains at smooth seams and sync chain toggle (#3370)
2026-10-20 12:38:48 +00:00
Igor Bronovskyi b3811168fc fix(web): keep the CJK face a fallback for a non-CJK UI (#3535)
BIZ UDPGothic's Cyrillic glyphs are full-width (1.0 em), so promoting the
CJK font to the front of Proportional made Ukrainian text look wide with
large gaps between letters, broke word wrapping, and truncated UI labels.
When CJK text loaded on the web, install_cjk_font hard-coded "ja" and
stayed promoted after switching to Ukrainian or English.

Pass the live UI language to install_cjk_font_for so the CJK face only
leads a CJK UI. Keep fetched CJK font bytes on the web shell and re-apply
fonts when the language changes, and add a regression test that a
non-CJK UI keeps the CJK face as the last fallback.
2026-10-20 12:38:27 +00:00
rlartotandClaude Opus 5.5 c64a611818 Boolean: fail an unverifiable intersection instead of keeping what it should trim (#3244) (#3344)
* claim: #3244

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Fail an unverifiable intersection instead of keeping what it should trim (#3244)

When every route of the general boolean fails, it falls back on the sampled answer
(one body whole, or nothing) with a "not verified ... that part is ignored" warning,
even when the bodies' facets cross well past their faceting error. For an
intersection that keeps exactly the material it was asked to trim: teeth standing
0.27 mm out of a trimming cylinder came back untrimmed, and `solidcraft-cli run`
exited 0 with a part 16.918 mm in radius.

An intersection whose sampled answer is contradicted by facets crossing by more than
twice the depth the warning reports (6 x the check mesh tolerance, three times the
faceting error of two meshes) now fails, and the model is kept. Cuts and unions keep
the fallback: shelling a body in two pieces relies on it (a cavity tool grazing the
other piece), with the same depth and ignored volume as this case.

Fixes #3244

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Leave an empty unverified intersection as it was (#3244)

Only a doubted intersection that keeps one body whole is refused. An empty
one ("the bodies are apart") stays a result reported unverified: the clearance
and interference checks rely on it, and main's new
a_pin_through_a_d_bore_of_its_size_still_overlaps_the_flat (#2714) expects it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 12:37:43 +00:00
9a0e6f8ae0 A body dropped on a component's Bodies folder moves into that component (#3270) (#3347)
* claim: #3270

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* A body dropped on a component's Bodies folder moves into that component (#3270)

The Bodies (and Sketches) folder row only took items of its own
component, to take them out of groups. A body dragged there from another
component was refused, though the folder looks like the place to drop
it, so moving a body back to a parent seemed impossible. Items of the
same folder from another component now move into the folder's
component, as a drop on the component's own row does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 12:36:37 +00:00
rlartotandClaude Sonnet 5.5 689038d187 Delete Face asks for its faces instead of failing (#2167) (#3296)
* claim: #2167

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Delete Face asks for its faces instead of failing (#2167)

Clicking Delete Face in the toolbar ran face.delete with no parameters and
reported "`faces` must be a list of points or face names", ignoring any
preselected face. It now opens a dialog with a Faces input, like Shell,
Draft and Offset Face, takes the preselected faces, and reopens from the
timeline.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-20 12:35:30 +00:00
Nathan Charles 3f7959b536 Canvas and Decal: the file picker opens on PNG and JPEG images (#3266)
* Canvas and Decal: the file picker opens on PNG and JPEG images

canvas.insert and canvas.decal opened the general Open dialog with no file
type, so it started on "Designs, CAD files and meshes" and PNG/JPEG files
were greyed out. Offer the image types first, as Insert SVG/DXF do (#1801).

* Canvas and Decal: rustfmt the file-picker test
2026-10-20 12:34:23 +00:00
a7bc7fe2ff AGENTS.md: merge queue, no merges of main, check open work before starting (#3559)
- The repository is tangency-labs/solidcraft (origin and the claim check pointed at the old one).
- PRs land through the merge queue (`gh pr merge N --squash --auto`) after a maintainer adds
  approved-for-ci; merging your own PR straight away is gone.
- A PR is rebased onto main, never merged with it.
- New "Before you start": an authenticated gh, the full open PR and issue lists, and a look for the
  same feature or the same files before opening a second PR for one change.


Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 12:28:22 +00:00
GeorgetteandClaude Sonnet 5.5 876d57a67b Mouse gestures: ring of tools on the right button, per studio and customizable (#2934) (#2936)
* Mouse gestures: a ring of tools on the right button, per studio and customizable

Preferences > Navigation gets a Mouse gestures switch and a Customize window (number of
tools and their place, per studio). Gestures need the SolidWorks mouse mode and turn the
right-drag orbit off. The ring is 280/350 pt, one zone per tool, alternating tints (three
when the count is odd). The radial context menu is unchanged.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ

* Mouse gestures: the ring opens on the right-button press; the right-click menus are off while gestures are on

The ring opens at once on the press, even while a tool or dialog is active. While gestures are
active the viewport's right-click context menu, the right-click that finishes a tool and the
radial context menu no longer fire. With gestures off nothing changes.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ

* Mouse gestures: the ring opens after 4 px with the right button held; a plain right-click keeps its menu

The ring no longer opens on the press. It opens where the button went down once
the pointer has moved 4 points with the button held, even while a tool is in
progress. A right-click that does not move opens the usual context menu (or
finishes the tool) again; the release that ends a gesture opens no menu. The
radial menu stays off while gestures are active.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ

* Re-trigger CI (the run was cancelled when approved-for-ci was added)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Dwcq9eNUMZ1jNeKvWd1bcZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-20 12:28:11 +00:00
bherbruckandClaude Opus 5.5 47108fa063 Open: show a design as its bodies are meshed (#3053) (#3178)
* Open: show the design as its bodies are meshed, off the UI thread (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Open: hold screenshots until the design is meshed; profile lines

* Tests: time-bounded opens

* Open: a Loading parts n/N note while bodies are meshed

* Open: frame the design from outlines while it goes into the window

* Outline bounds: vertices and edges only; test

* Frame watch: the window thread's frame times by open phase (SOLIDCRAFT_PROFILE_FRAMES)

* Open: the picture grows in mesh order and stays once complete; refreshes pace themselves; named frame steps; watchdog test

* Open: outlines measured on the file worker and kept per body

* Open: draw the Home picture under the opened file's own key once meshed

* Format the open wait

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 12:27:42 +00:00
raykholo ca9ebb44db Sheet metal: refuse a flat pattern that no longer matches the body (#3324) (#3325)
* claim: #3324

* Sheet metal: refuse a flat pattern that no longer matches the body

A feature that is not sheet metal can change a sheet body's material
without its sheet model knowing: a mirror combined into it, an extrude
joined onto it, a fillet or chamfer on a corner. The flat pattern, the
DXF and the bend table then wrote the sheet as it was before, a part
other than the one in the design, with no warning.

The evaluator now notes, per sheet, the first such feature: one that
changes the body's shape while its sheet model stays the same. That
feature warns, and sheet.flat_pattern, sheet.export_dxf (also with
per_body) and sheet.export_bend_table refuse with "not supported yet",
naming it. A sheet metal feature, or machining the sheet keeps as
cut-outs, rebuilds the body from the model: it clears the note and
warns that the change is not kept. Moving the body, splitting its faces
and cosmetic threads leave the flat pattern as it is.

* Sheet metal: a modelled thread is refused in the flat pattern too

Only a cosmetic thread leaves a sheet body's material as it is. A
modelled thread cuts the thread profile into the hole, which the flat
pattern does not have, and a later sheet metal feature dropped it
without a word. It now marks the sheet like a fillet does: it warns,
the flat pattern, DXF and bend table refuse naming it, and the feature
that rebuilds the body says the thread is not kept.
2026-10-20 12:07:24 +00:00
jb69andClaude Opus 5.5 e44dd4ff9e Loft: refuse consecutive sections that lie in one plane (#3412)
A loft through two sketches on the same plane built a flat body of zero
volume and reported success, so the mistake surfaced later, if at all
(a measure of 0, or a boolean that did nothing).

`loft_wires` now checks each pair of consecutive sections: parallel
planes with the second section's centroid in the first's plane are
refused with "loft sections i and i+1 lie in the same plane (no volume
between them)". The tolerance scales with the section's distance from
its plane's origin.

Test: two circles on XY; the loft fails with that message and leaves no
body.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 11:43:14 +00:00
jb69andClaude Opus 5.5 ebada963a4 Parameters: walk through a flipped plane to its base's expressions (#3481)
`PlaneRef::walk_exprs` stopped at `Flipped`, so a sketch created with
`flip` on an offset plane (`{plane: "XZ", offset: "d", flip: "x"}`) did
not list the offset as an input. Changing `d` rebuilt nothing that read
the sketch, and the model went stale.

`Flipped` now continues to its base, as `Offset` and `AtAngle` do, in
both `walk_exprs` and `walk_exprs_mut`.

Test: a loft between XZ and a flipped XZ plane offset by `d` has the
volume for d = 30, and for d = 50 after `parameters.change`.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 11:43:10 +00:00