* claim: #9465
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Face attachments: a piece of a face its certificate finds the other pieces of keeps that certificate (#9465)
The nightly action matrix has refused a sketch and an offset plane on the
sensor enclosure lid's underside (`examples/sensor_enclosure :: Lid/F2:top`)
since #8278. The lid's lip, joined below it, parts the underside into a ring
and a panel; the ring rests on the case and is named after the case's top,
so the lid's cap certificate (via certified_pieces) finds only the panel.
#8278 then refused the certificate because it doesn't find the picked face,
and the history-name fallback can't take a name made by another body's
feature.
A face that is no pattern or mirror copy and lies on the same oriented plane
as the pieces the certificate finds is another piece of that face: the
certificate stands for it, as before #8278. Copies (the #8278 case) still
fall back to their own history name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8510
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: drag the labels away from the part (#8510)
The distance and X/Y/Z labels in the view follow a drag of the pointer and keep
a leader to what they measure; a double-click or a new measurement puts them
back. A press on a label picks nothing, starts no box selection and opens no
Select Other.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9105
* Sketch: alignment guides from any hovered point while drawing (#9105)
While a drawing tool waits for a point, hovering a line or arc end, a
rectangle corner or a free point wakes the same temporary horizontal/
vertical tracking guide as a circle centre or line midpoint. Idle
hovering keeps centres and midpoints only. Preference
sketch_tracking_points (on) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9130
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: a Joints folder under each placement lists the joints that attach it (#9130)
Each component placement in the Browser gets a Joints folder (closed at
first) listing the joints whose Component 1 or Component 2 is that
placement, each beside the placement it joins it to. The rows are the
root folder's joints: click picks, the eye hides the glyph, double-click
edits and the menu is the joint's menu. The root Joints folder is
unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8275
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: written to disk in the frame they change, not only at a clean exit (#8275)
eframe saves app.ron every 30 s and when the window closes normally. A
change made since the last save was lost whenever the app didn't close
normally: ended from the Task Manager, stopped by a sign-out or shutdown,
or crashed or hung in the graphics driver on the way out. The next start
then showed the old settings (View navigator back to Axes, Display quality
back to Normal).
The desktop app now writes its settings and flushes them in the frame they
change (frames with input and the one after), as the web app already does
(#8644). Unchanged settings are not written again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings: write at most once a second, and only after input that can change them (#8275)
Review: pointer motion came in every frame while the mouse moved, so the
settings were serialized every frame; and some settings change in every frame
(a panel's width while its edge is dragged), which would have flushed app.ron
on the UI thread each frame. Only clicks, keys, text, paste, wheel and pinch
count as input now, and the file is written at most once per second: a change
made in between waits, a repaint is asked for when its second is over, and it
is written then, so an idle app still writes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9062
* Sketch drag: a line is never shrunk to a point to follow the cursor (#9062)
A line's end on a horizontal construction line through the origin, dragged
up off it, made the construction line vanish. A horizontal row is
b.y - a.y, which a line a hair long meets at any tilt, so the drag's held
solves met the point-on-line by shrinking the construction line: to 1e-5 mm
on the first frame, 1e-7 mm by the tenth, and the end went up.
A drag step (held solve, the tangent-ends-held solve, and each cursor
correction pose) that shrinks a line or circle from over 1e-3 to under
1e-4 now counts as failed, as a step that wraps an arc does. The end then
stays on the construction line, which keeps its length.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9034
* Assistant: say when an installed agent can't start, and how to reinstall it (#9034)
An agent whose program is found but fails its `--version` check without
printing a version (npm's opencode.exe left as a placeholder when the
package's setup script did not run, which Windows refuses with "not
compatible with the version of Windows you're running") was listed like
a working one, and connecting only said "The agent stopped." with the
system's message.
Discovery now keeps why the program did not start: the spawn error
(Windows' `%1` replaced with the program) or, through a `.cmd` shim, the
first stderr line or the exit status. A probe that times out still says
nothing. The picker shows "Installed, but it does not start: ...", and
connecting first explains it with the agent's install command and Refresh.
The control channel status carries `problem`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9696
* Show an edited Free Move its stored turn as the X/Y/Z angles that remake it (#9696)
* cargo fmt
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #9142
* Exploded View: grey it out until the design has two components (#9142)
On a part made of plain bodies (the sample plate) Exploded View opened its
dialog and failed on OK with "an exploded view needs two or more
occurrences". The command is now disabled until the design has two or more
occurrences, and its tooltip says why and which commands make components.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9624
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Control channel: document.inspect reports undo, redo and path in the app (#9624)
The app answers document.inspect on a scratch copy of the session, which
has no undo or redo history and no file path, so the reply always said
undo 0, redo 0, path null. Take those three values from the live session
and put them into the reply.
Fixes#9624
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #1044
* Continuous orbit turns about the Orbit around point (#1044)
With Orbit around set to the point under the cursor (or the origin), Continuous
orbit still turned about the view's centre. Cursor orbits move that centre off
the model, so the model swung across and out of the view while it spun. The
spin now turns about the origin, or the model point in the middle of the view
(else the middle of the bodies in view), held from start to stop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9457
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Keep the sketch pane still at fractional display scaling (#9457)
Right-docked cards were placed by their right edge from last frame's
measured width, which flipped by one physical pixel each frame at
scales such as 125 % in the Docked layout. Place them by their left
edge from the width they are held to instead.
Fixes#9457
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* claim: #9731
* Sketch Extend: only an end on a circle counts as held (#9731)
grow_line's on-circle test was true for every point inside the circle; test distance to the circle instead. Also pin the new end point of a held-end extension onto the curve it stops on, as the free-end path does.
* Fix regression test harness usage and held-end setup (#9731)
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
construction_visible checked the item's own hide and its folder, but not
the placement its component is drawn at, so hiding Part:1 left Part's
planes, axes and points on screen. It now asks feature_placement_visible,
the check sketches already made; the placement path is computed in one
place for both.
* Arabic: colour key wording in the viewport analysis status help
* Arabic: tanween and direction-neutral wording in the browser eye position note
* Arabic: outline wording and no direction mark in the print face highlight tip
* Arabic: sketch term in the constraint glyph note
* Arabic: checkbox wording and discard verb in the parameters apply-live option
* claim: #9680
Co-Authored-By: Claude <noreply@anthropic.com>
* Browser: drag over the eyes to show or hide many rows at once (#9680)
Press an eye and drag up or down over other eyes: each eye the pointer passes
takes the first eye's new state (shown or hidden), and the whole drag is one
undo step. A plain click is unchanged. Dragging near the list's top or bottom
edge scrolls it. A component's eye now goes through browser.visibility, so it
is undoable like a body's.
Co-Authored-By: Claude <noreply@anthropic.com>
* Browser: fix the eye drag's undo merge and layering (#9680)
Merge the drag's steps from the undo depth noted at press, when the design
and visibility still match, instead of searching the history. Run the merge
every frame from logic(), so a release under an overlay is never missed. An
eye under a popup or tooltip no longer takes part in the drag. Adds a
regression test for a drag from the Origin's eye after a show.
Co-Authored-By: Claude <noreply@anthropic.com>
* Browser: say when the eye drag's undo merge gives up (#9680)
Co-Authored-By: Claude <noreply@anthropic.com>
* Gallery test: the eye-drag state key is not a renderable element
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
* claim: #9060
* Ribbon tooltips: help for the Assemble and Insert tools and the Create primitives (#9060)
56 commands get the two-sentence help under their tooltip, in English,
German, Japanese, Chinese, Arabic, Hebrew and Vietnamese, and leave the
backlog: every Assemble tool (components, joints, contact, motion,
position), every Insert tool (files, images, 2D, library, links) and the
Model > Create drop-down primitives (box, cylinder, sphere, torus, cone,
coil, pipe, thread, rib, web, emboss, boundary fill, bounding solid).
Their drop-down rows now show a tooltip as well. The help tests use
sketch.trim as the undocumented example, since solid.rib has help now.
* claim: #2153
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Zebra: flat faces keep one stripe colour while the view turns (#2153)
A face whose normal lies in the upright plane through the view (every
horizontal face) reflects straight ahead, where the zebra's sideways
coordinate is zero: exactly on the edge between a black and a white
stripe. Rounding then picked one or the other from frame to frame, so
the face flickered while the camera orbited. Straight ahead is now white.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Fold the pending design format changes (browser-nested-groups, point-cloud-properties, print-faces) into format 45.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9741
* motion.list gives study keys in motion.study units
Angle keys came back in radians while motion.study takes degrees, so an
agent that listed a study and wrote it back changed every angle by a
factor of 57.3, silently. Convert key values on the way out like
joint.list does (degrees for angles, mm for distances), give each key a
unit and its joint's name, and add a round-trip regression test.
---------
Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
* claim: #9407
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Section caps: a body touching another along a curved face keeps its own cap (#9407)
Seen through a cut, a far wall and another body's face lying on it (a shaft
in its bore, a ring in its housing) are the same surface faceted two ways, so
the marking pass let the other body's face win in streaks. The section's
passes now first count the faces behind the cut in the stencil (back +1,
front -1): where the count says the cut runs through a body but a front face
won, the back faces are drawn again pulled toward the eye by a few pixels and
take the cap back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9279
* Parameters: an option to hold edits until Apply or OK (#9279)
"Apply each change as you leave its field" (on by default, remembered in
the preferences as parameters_apply_live). Off: an expression edit is
checked when its field is left but waits, without a preview; Apply or OK
sets every held edit in one parameters.change {changes}, so the design
rebuilds once and one undo takes them back. Cancel, the close button and
Escape drop them. Turning the option back on applies what waits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the parameters_apply_live preference in ui.prefs (#9279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameters: the hint says edits wait for Apply or OK when they do (#9279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the remaining CPU lighting and
reflection controls, render diagnostics, lens and film effects, GPU path
tracer options, HDR source details, the resource library and the raw
linear EXR options.
* claim: #9144
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* DXF export: the full release 2000 file structure strict readers need (#9144)
The view and flat pattern DXF left out parts of the AC1015 file that a
strict reader expects: the CLASSES section, the VPORT, VIEW, UCS, APPID
and DIMSTYLE tables (with *Active, ACAD and Standard) and the ACAD_GROUP
dictionary under the root dictionary. They are written now, along with
$DWGCODEPAGE; the active viewport looks at the whole drawing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8776
* Crash reports: a window opened after startup no longer labels the run "during startup" (#8776)
egui-wgpu reports "window surface" and "surface configure" for every native
window, also the ones opened after startup, such as the agent chat in its own
window. Each one overwrote the journal's "running" phase, so a later unclean
exit was reported as "during startup (surface configure, N s after launch)".
crash::startup_step records a startup step only until the app runs, and the
app's egui-wgpu hook calls it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9472
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* Browser: the recover-unsaved-work card always shows Recover and Discard
A window's scrolling body was only offered the height the card had the
frame before. A card first laid out while the page was still tiny (a
browser canvas not sized yet) kept a body of no height for good, so only
its title showed and the required choice could not be made. The body is
now offered the room the screen leaves and shrinks to its content, which
also covers the desktop recovery card and every other system window.
Fixes#9472
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
Adds 130 German translations for messages that exist in en.json but are
missing from de.json, in a new pending file as described in
assets/locales/pending/README.md. Covers the quick measurement, a few
Preferences labels and a large part of the Render panel (adaptive
sampling, surface aging, camera background, CPU lighting and environment).
* claim: #9565
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
* feat(browser): reorder features by dragging rows of the History in the browser
Let users drag features in the History shown in the browser to move them, with the same drop bar and checks as the History at the left, while the rollback marker still drags on its own.
refs: #9565
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
---------
Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>