Commit Graph
3542 Commits
Author SHA1 Message Date
semmelrindeandClaude Opus 5.5 b99d4ddde9 Sketch Coincident: a selected line midpoint is a point it takes (#10311) (#10315)
* Sketch Coincident: a selected line midpoint is a point it takes (#10311)

A selected midpoint goes to the command as {midpoint: line}, as
Horizontal/Vertical's alignment takes it, but Coincident wanted a point
id and refused it with "b must be a point or curve". The command now
puts a point at the line's middle, tied there by a Midpoint constraint
(or uses the one already tied there), and makes that point coincident
or puts it on the other curve, in one undo step. The toolbar button and
the context menu send a selected midpoint that way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Coincident: test a line midpoint in the command, the toolbar and the context menu (#10311)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 00:44:48 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 425417b36a Web app: open a large design without freezing the page, with progress and Cancel (#10198) (#10211)
* Engine: open a design a feature at a time (#10198)

OpenSteps splits doc.open of a design into steps for a caller that must
keep working meanwhile (the web app, which has one thread): start reads
the file, each step evaluates the next feature by moving a copy's history
marker one feature on (so every result before it is reused), and finish
puts the design in the session's place with doc.open's reply. The next
feature's imported STEP text is offered first, so a caller can read it
in parts. Session::opened and opened_at are split into small helpers so
both paths build the session the same way; doc.open is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Web app: open a design a few features a frame, with progress and Cancel (#10198)

On the web, a design to open is now a staged file load like a STEP file
(#1376): its features are evaluated for about 30 ms a frame through
OpenSteps, a feature's imported STEP file is read a solid per frame first
and held so the feature finds it read, the progress card counts the
design's features, Cancel works between steps, and the meshes are made
a few per frame afterwards. The desktop app keeps its worker thread.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Web app: design links and the files window open designs with progress and Cancel (#10198)

Design links (?open=URL, as embedded viewers use), the files window and
designs opened from the computer went through the one-shot open_path,
which froze the page on a large design. They now use the staged open; a
design link becomes an unsaved copy under the link's name once the open's
reply arrives (SolveApp::open_path_answered).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 00:17:15 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 b7a6967ef2 Web app: open a design a few features a frame, with progress and Cancel (#10275)
* Engine: open a design a feature at a time (#10198)

OpenSteps splits doc.open of a design into steps for a caller that must
keep working meanwhile (the web app, which has one thread): start reads
the file, each step evaluates the next feature by moving a copy's history
marker one feature on (so every result before it is reused), and finish
puts the design in the session's place with doc.open's reply. The next
feature's imported STEP text is offered first, so a caller can read it
in parts. Session::opened and opened_at are split into small helpers so
both paths build the session the same way; doc.open is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Web app: open a design a few features a frame, with progress and Cancel (#10198)

On the web, a design to open is now a staged file load like a STEP file
(#1376): its features are evaluated for about 30 ms a frame through
OpenSteps, a feature's imported STEP file is read a solid per frame first
and held so the feature finds it read, the progress card counts the
design's features, Cancel works between steps, and the meshes are made
a few per frame afterwards. The desktop app keeps its worker thread.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 00:16:01 +00:00
NOWN-DEVandClaude Opus 5.5 68105938e2 Sketch: a text rebuilt with other words keeps the far-move walk (#10357)
A sketch holding a text whose words come from a text parameter is left
unsolved after the words change and its links then move far, with the
warning "the sketch constraints conflict (k1, ..., k10)". The same two
changes the other way round solve.

Repro: a sketch with three projected points, a construction rectangle on
them and a centred text along its far side, the text's words given by a
text parameter. Change the parameter's words, then move the source
geometry about 280 mm. Without the word change it solves; with it, the
sketch warns of conflicting constraints.

Other words are other outlines: the text is built anew with new points
and curves. The solve that walks a sketch from its stored state to a far
link move (and the check for sides the jump turned over) refused the two
sketches as not the same entities, and the single jump left alone failed.

`Sketch::stored_with_rebuilt_texts` gives the stored sketch as this one
has its entities when they differ only by rebuilt texts: the texts'
entities as they are now, every other point, radius, arc turn and
constraint value as stored. `Document::solve_sketch` walks from that, so
the points pair up again. Sketches that differ in anything else are
refused as before.

Test: sketch_project::side_tests::a_label_follows_its_source_far_after_a_text_parameter_gave_it_other_words
(fails without the fix with the conflict warning above).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 00:15:32 +00:00
ABDULLAH 11e283ba77 Arabic: reasoning effort label, view cube arrow note (roll term, tanween spelling), Look group heading (#10355) 2026-11-01 00:11:16 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 c25c2f3a21 Sketch: sample display curves without a heap copy per subdivision (#10342)
The pixel-bounded curve sampler that draws sketch curves and profile
outlines ran again on every camera move, and each subdivision step
allocated: every span's control points were a Vec, splitting one in
half built a Vec per de Casteljau level, each node's projection was
collected into a Vec, and every drawn part grew from two vertices.

The control points now live inline in a fixed array (`Hull`, at most a
degree-9 Bezier), the halves are worked out in place with the same
`mix` level by level, the projection goes into a reused array, and a
new part starts with room for eight vertices. The arithmetic and its
order are unchanged, so the points are the same bit for bit.

Tests: `samples_the_same_points_bit_for_bit_as_the_reference` keeps the
previous sampler as a reference and compares paths, quality and budget
use over every segment kind, slanted and far-off planes, orthographic
and perspective views from far out to far in, clipped and unclipped,
with ample and spent budgets. Ignored timings:
`sampler_cost_against_the_reference` (render) and
`sketch_scene_cost_while_the_camera_moves` (ui-egui).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 00:10:37 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 e0582668bb Web app: an opened design is drawn when its meshes cannot be made on a thread (#10362)
The web build cannot start the open-meshing thread. Its fallback counted
every body done but listed none ready, so whatever the file load opened
on the web drew no bodies and kept "Loading parts n/n" up for good. The
fallback now lists every body ready and the viewport meshes as it draws,
as the fallback meant to. Found while opening a design through the file
load in the browser (#10198).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 00:10:20 +00:00
Colin Faulkingham df04e7742f Assembly: let components extruded from reference faces move independently (#10289) (#10332)
* claim: #10289

* fix: preserve placement of face-derived components (#10289)
2026-10-31 23:51:18 +00:00
github-actions[bot] 56b77b405d Regenerate generated files and fold pending files [skip ci] 2026-11-01 00:09:18 +00:00
raykholo e4a67d1e30 Assembly: move sketches to the part they're drawn on (#10218) (#10219)
* claim: #10218

* Assembly: move sketches to the part they're drawn on (#10218)

`component.move_sketches.to_parts` moves each given sketch, or every sketch in the design, whose
plane is an exactly attached face of a part's body into that part through
`component.move_sketches`, as one undo step. Sketches with no single part to go to stay where they
are, and the reply lists what moved and what stayed, with the reason. The Sketches folder's menu
offers it for the folder's sketches (or the selected ones), and a sketch's menu for that sketch or
the selected sketches; the status bar says how many moved and why the others stayed.

`component.move_sketches` now keeps a face-attached sketch where it is on its face: the sketch is
authored in the new component's placement (the face's own when the component owns the face), and
its picked point and repair plane are carried into it. Before, a face-attached sketch moved out of
the design was left without an author placement and failed to evaluate.

* Tests: the moved part is free to move; face anchor path

* Tests: move the to_parts test to the component command tests

* Shorter label: Move Sketches to Their Parts
2026-10-31 23:42:47 +00:00
Dahak BuildsandDahak Builds ed9599d1e4 View angles card: per-axis zero buttons and locks (#4581) (#10344)
* claim: #4581

* View angles card: per-axis zero buttons and locks (#4581)

The readout card under the orientation gizmo already showed and edited the
view's yaw, pitch and roll in degrees. Each axis row now also has a zero
button that turns that angle to 0 degrees at once, and a lock: a locked
angle stays put while orbiting, turning with the arrow keys or using a 3D
mouse, and its field and zero button go inert, so a symmetrical view can
hold its yaw and roll at 0 while only the pitch is adjusted.

* clippy: drop needless borrow in keep_locked call

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 23:39:24 +00:00
semmelrindeandClaude Opus 5.5 80fb02f0b8 Sketch Ellipse: Major radius and Minor radius boxes while drawing (#10279) (#10282)
* Sketch Ellipse: Major radius and Minor radius boxes while drawing (#10279)

The Ellipse tool showed no value boxes. After the centre it now shows
Major radius, after the end of the major axis Minor radius; a typed value
places the point at that size and becomes the ellipse's dimension, as for
a circle's Diameter. sketch.draw.dimensioned takes major_radius and
minor_radius for sketch.ellipse, so Dimension new shapes covers it too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Ellipse: test the typed radii in the tool and in sketch.draw.dimensioned, and say so in the guide (#10279)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Ellipse: rustfmt the new engine test (#10279)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 23:18:35 +00:00
a5c8fa7be7 Viewport: faster highlight with many bodies selected (#10204)
* claim: faster highlight with many bodies selected

* Viewport: find selected bodies by name once per highlight build

With every body of a large assembly selected, each hover change built the
highlight again and looked every selected body up along the world's bodies
(`ModelState::body` scans them), which is quadratic: about 2.2 million name
comparisons on 2,116 bodies, some 3 ms of every hover change.

The selected bodies, faces and edges are now found in a map by name, made at
the first lookup. A name held by more than one body finds the first, as the
scan did, so the same bodies are lit in the same order.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport: measure hover changes with many bodies selected

An ignored scale test: every body of a design selected (a file named by
SOLIDCRAFT_SCALE_DESIGN, else a generated grid of 1,440 boxes), the pointer
moving from face to face, timing each hover change's highlight build headless
and as the app builds it on a GPU (bodies drawn from their plans, and from the
model scene's blocks). Run with `--ignored --nocapture`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 23:14:05 +00:00
bherbruckandClaude Opus 5.5 beb35029a4 Release 0.29.0 (#10347)
Fold the pending design format changes (align-axis-mask, equation-variable-unit, link-file-digests) into format 46.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 19:20:15 -04:00
MarkusReandCodex 4c3d1484c5 Parameters: show one rename tooltip per name (#10309)
Keep full names in the tooltip only when the name cell clips them, and keep
the double-click rename hint without stacking a second popup. Cover short
and long names, favorites, and double-click input with a regression test.

Co-authored-by: Codex <noreply@openai.com>
2026-10-31 22:48:33 +00:00
Colin Faulkingham e0c1b8adbd Sketch: snap to infinite construction-line crossings (#10011) (#10285)
* claim: #10011

* Fix snapping at infinite construction-line crossings (#10011)
2026-10-31 22:23:57 +00:00
bherbruckandClaude Opus 5.5 604515cfb3 Test: hovering a large body checks the pick index doesn't block, without timing (#10325)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 22:23:51 +00:00
github-actions[bot] 57d789c0aa Regenerate generated files and fold pending files [skip ci] 2026-10-31 22:34:32 +00:00
github-actions[bot] 4e9656ea9a Regenerate generated files and fold pending files [skip ci] 2026-10-31 22:25:42 +00:00
Nathan Dane 07160d9366 Preferences redesign 3/11: page structure, aliases and profile card (#9875) (#9907)
* claim: #9875

* Preferences: split pages and preserve aliases and profiles

* Preferences: preserve moved-page regressions and complete translations

* Preferences: retain newly added settings in profiles

* Preferences: target Tools in tool-cursor persistence tests
2026-10-31 22:05:20 +00:00
Dahak BuildsandDahak Builds c111b5f2fb ViewCube: option to invert directional rotation arrows (#10254) (#10286)
* claim: #10254

* ViewCube: an option to invert the directional rotation arrows (#10254)

A new Navigation preference, "Invert the view cube rotation arrows"
(invert_navigator_arrows, off by default): with it on, an arrow around the
cube orbits the camera the way the arrow points, as in Fusion and Inventor,
instead of rotating the cube toward the side the arrow sits on. Left and
right, and up and down, trade places, and each tooltip names the action
actually performed. The curved roll arrows are not inverted: they name the
rotation they perform, not a direction.

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 22:00:16 +00:00
Nathan Dane 4594d81f7a Gruvbox: light and dark themes with three contrast choices (#10292)
* claim: consolidate Gruvbox contrast variants

* Consolidate Gruvbox variants into light and dark contrast choices

* Check both original Gruvbox viewport gradient endpoints

* Reset Gruvbox scenario state before independent theme checks
2026-10-31 21:58:30 +00:00
raykholo 2e3448f348 Sketch: an option to make the part active when sketching on its face (#10215) (#10216)
* claim: #10215

* Sketch: an option to make the part active when sketching on its face (#10215)

Preferences › Sketch › "Sketching on a part's face makes that part active", off by default.
When it is on, a sketch started on a face of another component's body activates that component
at the picked placement first and is made there, as after an explicit activate. The part stays
active, so what is built from the sketch lands in the same part.

For scripts the same is `sketch.create` `activate_part: true`; the reply's `activated` names the
component and placement. On an error the active component goes back to what it was.

* Tests: a free part, no edge projection, the sketch on the face plane
2026-10-31 21:52:09 +00:00
github-actions[bot] e5c6e3ef1e Regenerate generated files and fold pending files [skip ci] 2026-10-31 21:57:31 +00:00
rugbymauri 57df47b763 Sketch: clicking the running tool's button ends it, so clicks select again (#10151) (#10263)
* claim: #10151

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

* Sketch: clicking the running tool's button ends it, so clicks select again (#10151)

The lit ribbon button of the running sketch tool started the tool over
when clicked again, so it gave no way out: every click in the view kept
drawing or measuring, and Ctrl+click never reached selection. Esc and
right-click already end a tool, but the pressed button looks like the
natural switch.

A second click on the running tool's button (large ribbon buttons and
the constraint grid) now ends the tool. Persistent analysis toggles keep
their own on/off. The old behaviour stays behind the Sketch preference
"Clicking the running tool's button ends it" (ribbon_click_ends_tool).

Fixes #10151

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

---------

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
2026-10-31 21:32:48 +00:00
PapaEcho 42145719a0 Measure: start with the current selection (#10169) (#10234)
* claim: #10169

* fix: initialize Measure from preselected items (#10169)
2026-10-31 21:26:40 +00:00
rugbymauri 64421a2cb9 3D mouse: turns a rolled or upside-down view the way the cap is pushed (#10083) (#10262)
* claim: #10083

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

* 3D mouse: turns a rolled or upside-down view the way the cap is pushed (#10083)

In the default upright (turntable) orbit the cap's Spin rolls the view,
but its Tilt and Turn went straight into yaw and pitch, which ignore the
roll. Rolled upside down, every push moved the model the opposite way on
screen; rolled on its side, tilt moved it sideways.

The device now takes Tilt and Turn back through the view's roll before
the orbit, for the cap and for a device app over the navigation bridge.
An unrolled view behaves exactly as before; Free orbit was already
view-relative and is unchanged.

Fixes #10083

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>

---------

Signed-off-by: Maurizio Monticelli <maurizio@whatwedo.ch>
2026-10-31 21:20:10 +00:00
ABDULLAH 711e41233f Arabic: orbit/pan/zoom verbs in the NX navigation help, System language choice, measuring bodies progress (#10272) 2026-10-31 21:19:33 +00:00
cf0508e5c8 Sketch: held solves that cannot succeed give up sooner (#6606) (#10208)
* claim: #6606

* Sketch: held solves that cannot succeed give up sooner (#6606)

A status-only solve (the held solves of a drag) only asks whether it
succeeds. When LM sits in a least-squares valley of conflicting
constraints it crawled on to its 500-iteration limit, and a held solve
runs LM up to three times. Such a solve now leaves a component once the
iteration has stalled far from a solution: over the last 20 iterations
the sum of squared residuals fell by at most 1e-5 of itself while the
largest residual is still above 1e-4 mm.

Successful solves are unaffected: on about 62,000 LM runs that succeeded
(the sketch and engine tests and 120 generated sketch scripts with 2,900
drags) the slowest still fell by 1.4e-3 over any 20 iterations while
that far off. Solves with an analysis keep iterating (their report names
the violated constraints), and live frames are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 20:51:32 +00:00
Dahak BuildsandDahak Builds bace1a1228 Assistant: set the reasoning effort per API agent (#10241) (#10259)
* claim: #10241

* Assistant: send a per-API-agent reasoning effort on /chat/completions (#10241)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 20:48:42 +00:00
Colin Faulkingham bda8b6b2e8 Fix Touchpad navigation with focused tool fields (#10231) (#10253)
* claim: #10231

* fix(ui): allow touchpad navigation with focused tool fields
2026-10-31 20:48:28 +00:00
P'tite TêteandP'tite Tête 52765304cd fix: Sketch rectangles and centre circles take expressions (#10251)
- sketch.rectangle.center and two_point: a corner given with expressions is a fixed point that follows its parameters, as with sketch.line
- sketch.circle.center: a radius or diameter naming a parameter is a driving dimension; a string naming none is just the number; bare numbers read in the design unit
- A radius that is not a number is refused with its own message and no longer passed over for diameter
- sketch.circle.two_tangent: a string radius reads bare numbers in the design unit

Co-authored-by: P'tite Tête <asso@ptitetete.com>
2026-10-31 20:07:36 +00:00
Colin Faulkingham ec526d2b3d Sketch: keep polygon inputs clear of the preview (#10035) (#10199)
* claim: #10035

* Sketch: keep polygon inputs clear of the preview (#10035)
2026-10-31 20:06:03 +00:00
ABDULLAH 3b3d93f333 Arabic: selection wording for the freehand lasso option, clearer view cube fit note, tanween spelling (#10249) 2026-10-31 20:05:41 +00:00
05f30c1674 Browser: a click just past a feature's name selects it instead of opening its sketch (#10079) (#10213)
* claim: #10079

* Browser: a click just past a feature's name selects it instead of opening its sketch (#10079)

The Edit Profile Sketch button on a browser feature row began 2 points after
the name, so a click that landed just past the name, or a press on the name
that slipped a few points before its release, opened the profile sketch.
The button now starts 8 points after the name, wider than egui's 6-point
click slop; the gap selects the row like the name does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 20:05:28 +00:00
Colin Faulkingham bba2fc1400 Report omitted print-face selections in command-script exports (#10230) (#10235)
* claim: #10230

* fix: report omitted print-face assignments in script exports
2026-10-31 19:58:48 +00:00
Dahak BuildsandDahak Builds 538d7fcb43 Language: follow the system language by default (#10138) (#10183)
* claim: #10138

* Follow the system language on a first start (#10138)

The language preference defaults to a new 'system' value: the OS locale
(sys-locale) is matched against the catalog list - exact tag, base
language, then English - and a System choice sits at the top of the
Preferences language list. A saved language still wins.

* Drop the explicit deref clippy flagged; regenerate THIRD-PARTY-LICENSES.txt for sys-locale

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 19:50:08 +00:00
Ben Rog-WilhelmandClaude Opus 5.5 8be56316f6 Sketch Chamfer: several corners at once, as Fillet does (#8998)
The three sketch chamfers take `points: [corners]` (a point reference or
{a, b} each), as sketch.fillet does: every corner is cut alike in one
edit, and a corner that can't be cut, or is named twice, refuses them all.
The Chamfer window sends every picked corner instead of refusing a second.


Claude-Session: https://claude.ai/code/session_01PVKpSVXR9iiwSM9B25kpvq

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 19:28:14 +00:00
github-actions[bot] eda51873aa Regenerate generated files and fold pending files [skip ci] 2026-10-31 19:33:49 +00:00
Colin Faulkingham d4144ddf9b Select: resolve faces and edges from a point or index (#10171) (#10191)
* claim: #10171

* fix(select): resolve faces and edges from a point or index
2026-10-31 19:11:54 +00:00
Dahak BuildsandDahak Builds c39f44e190 Orbit ignores floating input fields passing under the cursor (#10128) (#10206)
* claim: #10128

* Orbit ignores floating input fields passing under the cursor (#10128)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-31 19:04:33 +00:00
5b8d8416e9 Navigation: an NX mouse mapping (#10156)
* Navigation: an NX mouse mapping

NX's CAD1 scheme drags the middle button to rotate, middle + left to zoom and
middle + right to pan. The mouse mappings here hold one button at a time, so
the preset takes the middle drag with Shift (pan) and Ctrl (zoom) for those two
drags, leaves the right button to the context menu, and fits on a middle
double-click as NX does.

The help text says which NX drags the modifiers stand for.

* Navigation NX note: translations for the complete catalogs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Navigation NX note: use the message id nav.nx.help in the pending file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: clarkliu <277482660@qq.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 18:44:45 +00:00
github-actions[bot] 1f2356fa7b Regenerate generated files and fold pending files [skip ci] 2026-10-31 19:06:16 +00:00
github-actions[bot] e29e32f197 Regenerate generated files and fold pending files [skip ci] 2026-10-31 19:00:09 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 76e009ab10 Viewport: blend grid levels while zooming instead of popping (#9570) (#9608)
* claim: #9570

* Cross-fade the viewport grid between levels while zooming (#9570)

grid_step switches the spacing in a step (1, 2, 5 times a power of ten), so
the whole grid swapped at once as the view zoomed through a switch and
popped over and over while scrolling. Near a switch the drawn grid now
draws the outgoing and incoming levels together, weighted by a smoothstep
over about 19% of zoom either side, each level's lines on their own places
on the plane so a fading level never shifts. A line both levels share is
drawn once; its colour and width blend between minor and major.

grid_step itself is unchanged, so sketch snapping, dash lengths and the
tools keep their spacing; the dominant drawn level is always grid_step's.
The viewport and the headless picture share grid_lines, so they still draw
the same grid.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Fade out the fine grid before a non-nested coarser level appears (#9570)

The levels go 1, 2, 5 times a power of ten. From 1 to 2 and from 5 to 10
every coarser line is also a finer one, but 5 is not a multiple of 2, so
cross-fading the 2 and 5 levels drew lines at 0, 2, 4, 5, 6, 8, 10 mm at
once, which looked restless.

At that switch the finer level's own lines now fade out over the first
half of the cross-fade and the coarser level's own lines fade in over
the second, so the two are never drawn together. The lines both levels
share (every 10 mm, the finer level's major lines) stay at full strength
throughout, so the grid never goes blank. The cross-fade spans the same
zoom range as before, and the nested switches cross-fade as they did.

grid_levels keeps its shares (adding up to 1, grid_step's level the
stronger one); grid_lines draws a line only one level has as strongly
as that level's own lines. The headless and viewport tests now check
half strength at the nested 5 to 10 switch and no 2 or 5 mm line right
at the 2 to 5 switch; a new test zooms through 2 to 5 in four decades.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 18:35:49 +00:00
froglemonade2andClaude Fable 5.1 441d67f9ff View cube and axis gizmo: a standard view centres and fits the model (#10091) (#10092)
* claim: #10091

* View cube and axis gizmo: a standard view centres and fits the model (#10091)

A new Navigation preference, "Fit the model after a navigator view change"
(`navigator_fit`, off by default): with it on, a face, corner or arrow of
the view cube and an axis tip of the gizmo look at the middle of the model
from the one distance that fits its bounding sphere, so Home, an opened
design and every view chosen on a navigator share one zoom and one centre
and only the direction changes. Off, both navigators turn in place as
before.

"Home and Fit size" (`home_fit_size`, 10–100 %, default 100 %) is how much
of the view between the panels and the controls the model fills when Home,
Fit, an opened design or a navigator view change frames it; 100 % is the
framing as before.

`view.navigate` takes an optional `fit: true` with a direction or a turn,
so programmatic callers get the same framing.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-10-31 18:34:13 +00:00
semmelrindeandClaude Opus 5.5 6541a4e980 Assistant: the agent list and the boxes under the switcher keep the panel's margin (#10172) (#10179)
* Assistant: the agent list and the boxes under the switcher keep the panel's margin (#10172)

The agent switcher above them sits in the panel's side margin, but what
the panel draws under it before a connection (the Agent row with Add
agent and Refresh, the agents found, what isn't installed, the New chat
confirmation and the sign-in box) started at the panel's very edge, and
Refresh was cut off at the right. They now keep the same side margin.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Assistant: test that the agent list keeps the panel's side margin (#10172)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Assistant: the margin test passes the labels without a needless borrow (#10172)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 18:31:55 +00:00
85197c1224 Selection: a freehand lasso that takes what is fully inside it (#4376) (#10185)
* claim: #4376

* Selection: a freehand lasso that takes what is wholly inside it (#4376)

The SELECT panel gets a Lasso checkbox (UiState::lasso_select, ui.set
lassoSelect). With it on, a primary drag from empty space draws a
freehand loop; the release selects through the same path as the window
box: items whose points are all inside the loop and no segment crosses
it, so a concave loop leaves out a curve that bulges out of it. Shift
and Ctrl add as with the box. ui.drag takes via waypoints (and scenario
drag steps take more than two points) so agents and tests can draw it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 18:31:21 +00:00
Colin Faulkingham ed66adac5c Keep renamed bodies visible when reusing hidden names (#10163) (#10175)
* claim: #10163

* fix(engine): preserve visibility when renaming into hidden names
2026-10-31 18:15:56 +00:00
ABDULLAH e88295ceba Arabic: isometric view wording in the Extrude view preference, equation curve range unit option and note, quoted menu names in the graphics card note, tanween spelling (#10189)
* Arabic: isometric view wording in the Extrude view preference

* Arabic: equation curve range unit option and note read naturally

* Arabic: tanween spelling in the new bold-font and delete-first messages, menu and option names quoted in the graphics card note
2026-10-31 18:15:34 +00:00