* Release 0.27.1
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Render job test: wait for the cancelled job's reservation to be released
The worker drops a job's reservation just after the job turns terminal, so
checking admitted bytes right after wait_timeout raced (10 of 40 local runs
failed). Poll with a deadline, as dielectric_tests does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: snap where two recent centre and midpoint guides meet (#8694)
The alignment guide remembered one reference and did not move the cursor. Keep the previous centre or midpoint as well, and snap a drawing point to where their guides cross.
* Sketch: keep the recent-guide crossing snap off until asked (#8694)
The crossing snap was on whenever alignment guides were. Give it its own Sketch preference, off by default, so the guides stay visual until someone turns the snap on.
* Sketch recent snap: ar/he/vi strings and clippy borrow fixes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9072
* MCP: --param-check checks calls to the running app (#9072)
`mcp --connect` (and `mcp` once it bridges to an app) took
`--param-check` and forwarded every call unchecked, while the app's own
session is always off. `Remote` now checks each `engine.execute` and
`engine.batch` against this server's command contracts before sending:
`strict` refuses a call, or a batch with such a step, without sending
anything, and `warn` adds `param_warnings` to the app's reply (each
step's result in a batch). A command with no contract here goes to the
app unchecked. `Auto` carries the headless session's level over when it
bridges to a late app. `batch_preflight::contracts` is the contract half
of the existing preflight, for a runner in another process.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
theme::apply always sets egui's theme to light or dark, and egui's own window
sync then told the native window to be light or dark. A macOS window told so
keeps that appearance and no longer reports the system appearance changing,
so with Theme set to System the app stayed light after macOS turned dark. The
app now syncs the window itself: the system's appearance while the theme
follows it, the theme's own otherwise (for the title bar).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9025
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Sketch: an old edge-on projection keeps its line when it is re-resolved (#9025)
A face seen edge-on was saved as two lines on the same two points, one each way, and is one line now. Re-resolving the link dropped both lines and built a new one under a new id, so an offset that names the first line as its source failed with "an offset source vanished or changed shape". Keep the first line and drop only the second.
Co-Authored-By: Claude Code <noreply@anthropic.com>
---------
Co-authored-by: Claude Code <noreply@anthropic.com>
Fold the pending design format changes (sketch-equation-curves, timeline-joint-folders) into format 44.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The check for a constraint that shrinks a curve to a point took under 1e-6
for a point. One solve could squeeze a 49 mm side to about 1.2e-6 mm and
the next take it the rest of the way, so neither solve tripped it (two
rectangles' corners made coincident, found by a local sketch fuzzer). Under
1e-5 now counts: in 4000 random sketches the constraints that still
collapsed a line went from 9 to 0, and every refusal rate stayed the same.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9015
Co-authored-by: Cursor <cursoragent@cursor.com>
* Evaluate bare length offsets in the design's units (#9015)
Feature expressions like baseLength - 1 were subtracting millimetres because val() parsed with mm defaults and only applied design units to a final unit-less result.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* claim: #6921
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CLI: run refuses unknown options and takes --param-check (#6921)
`solidcraft-cli run` now checks its options through `known_args`, so a
mistyped option fails instead of being ignored, and takes
`--param-check off|warn|strict` with the MCP server's words and default
`off`. `warn` prints each unknown key with a suggestion on stderr and
runs the step; `strict` stops at that step and writes nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CLI: run's option check takes --param-check; warn on timed runs as steps complete
`run` keeps #6919's (#6918) unknown-option check, with `--param-check`
among the options that take a value. `Session::run_script_timed` now
takes the same per-step callback as `run_script_each`, so `run --timings`
or `--profile` at the warn level reports a step's warnings even when a
later step fails, instead of after the script (and not at all on a
failure).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8644
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web: open tabs share settings changes, so one tab no longer undoes another's (#8644)
Every open tab of the web app saved its whole copy of the settings to the
same browser storage, every 30 s and on focus loss, so a tab still holding
old settings put them back over a toolbar change made in another tab.
A tab now writes its settings in the frame they change, and the other open
tabs load them from the browser's storage event, so their own saves keep
them. Settings loaded that way aren't written back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9016
Co-authored-by: Cursor <cursoragent@cursor.com>
* UI: keep Distance entry under Preferences and Report a bug (#9016)
Canvas value boxes used Foreground order, so they covered system windows. Draw them as Background chrome instead.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* Sketch Trim: a cut at a curve's own end leaves no piece of no length
A curve that ends where another one ends crosses it there only within the
intersection's tolerance (1e-6), but bracket dropped cuts at the curve's
ends only within 1e-9 of its parameter range. A line ending on an arc's end,
trimmed from its other end, was cut a hair inside its own end and kept a
piece about 1e-7 mm long (found by a local trim fuzzer: 78 such trims in
4000 sketches, and 8 breaks). bracket now also drops a cut within that
tolerance of the curve's ends, as add_cut merges cuts that close together.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Extend: a touch at an arc's growing end is that end, not a stop
An arc whose end is where a line ends that touches the arc's circle there
found the touch a hair beyond the end (within the intersection's tolerance),
stopped on it, and added an arc from that point to itself. A hit within that
tolerance of the growing end (1e-6, as for the far end) is now the end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A constraint whose only solution squeezes curves to a point (a rectangle's
corner made the midpoint of its opposite side, or two opposite corners made
coincident) collapsed the whole rectangle while the sketch said solved. A
solve that shrinks a line or circle from over 1e-3 to under 1e-6 now counts
as one that fails, as one that throws points far away does: a strict edit is
refused, another keeps the sketch from before its solve, and the free solve
after the held ones in apply_in_order refuses the constraint.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
- Skip drawing and interaction for history chips outside the strip's visible part, after their slot is recorded
- Keep a dragged or focused chip, and every chip while a popup is open
- Frame on a 4,880-body design: 20.3 ms -> 14.6 ms (M4 Max, release, headless)
- Test a_long_timeline_paints_only_the_chips_in_view
Co-authored-by: P'tite Tête <asso@ptitetete.com>
On a Windows account whose %TEMP% is a short (8.3) path, such as
C:\Users\MATHEU~1\AppData\Local\Temp, three tests failed because they built
their folders from std::env::temp_dir(), and the agent file scope refuses short
names ("not allowed for this agent: short (8.3) names such as `PROGRA~1`"):
- engine: cmd::render::settings_tests::embedded_hdr_capture_rejects_parameters_scope_and_cpu_primaries_without_mutation
- ui-egui: agent_chat::tests::file_actions_wait_for_the_user
- ui-egui: agent_chat::tests::permission_modes_decide_what_asks
They now use vfs::temp_dir(), which spells the folder with long names, as
libraries_tests and motion_tests already do (#1385, #1211).
Checked on Windows 11 x64 with the 8.3 TEMP: the agent_chat and
render::settings tests (113) pass, and clippy -D warnings is clean for both
crates.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7287
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Command search: show a command's place in the ribbon, also inside section menus (#7287)
Hovering a command result in Search commands switches the ribbon to the command's
tab and marks its button with its tooltip; a command that has no button there
opens its section's drop-down on its row instead. Leaving the results (or closing
the box) goes back to the tab the user was on, so pressing S, typing and Enter
works as before.
Starting a command from the box makes its button or section label blink twice,
and a command started from a section drop-down marks that section's label while
it runs, like a pressed button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Command search: the ribbon reveal is a preference, off by default (#7287)
Preferences › Interface › Show search results in the ribbon (`ribbon_reveal`) turns on the hover
preview, the blink after a start and the running mark on a drop-down's panel label. Off, the
ribbon behaves as on main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Pending locale: Arabic, Hebrew, Japanese, Vietnamese and Chinese for the ribbon reveal setting
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #7912
* Sketch: dimension a sketch entity against a model edge
A dimension took sketch entities only, so measuring a sheet-metal body's edge
was refused with "cannot dimension that combination of entities". The
entities now take a model reference too, an {edge: [x,y,z], body?} or a
{vertex: [x,y,z], body?}, which is projected into the sketch first, as the
constraint commands' operands are since #6348, and measured there.
The Dimension tool picks a body's edge or vertex when the sketch has nothing
under the cursor, and reads the pick back into the reference the command
takes.
* style: rustfmt the sketch dimension command
* Cap the entities one call may project
A dimension projects the model references among its entities into the
sketch, one link and one resolve each, and the loop had no cap: a single
request could make the engine resolve thousands of model edges before
the dimension refused the list. The count is now refused before anything
is projected, and the projection loop stops at the same limit the
Project command uses.
* Sketch dimension on a model edge: use the sketch store after the store refactor
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The cursor correction tries the constraints' free directions a whole step at
a time and took a step as soon as the cursor's distance fell, by any amount.
Along freedom that can't reach the cursor (the far end of a line held only
by its direction), retracting onto the constraints still moves the cursor by
rounding, so such steps were taken: the end walked away a step at a time, and
a line measured by an angle could shrink to nothing, as in #7635. A step now
has to move the cursor itself by more than the solve's tolerance.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6237
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: save, switch, export and import input and interface settings (#6237)
A profile keeps the Interface, Navigation and Sketch preferences (mouse mode,
radial menu and gestures with every studio's lists, theme, scale, font, ...),
the language, the keyboard shortcuts, the toolbar, the S box favourites and
the imported theme it uses under a name. Machine-specific settings stay out
(3D mouse, graphics, units, AI, recent files).
- Preferences > General > Settings profiles: choose the active profile to
apply it, Save, Rename, Delete, Export... and Import...; a note shows when
the settings differ from the saved profile; Cancel takes a switch back.
- settings.profile.{list,save,apply,rename,delete,export,import} commands for
the control channel, palette and scripts; the engine checks the parameters,
the app does the rest.
- One `solidcraft-profile/1` file; import checks the format and name, drops
unknown keys and unreadable values, caps sizes, never switches, and never
panics. Each preference is applied through prefs::set, so a value this
computer refuses keeps its current one and is reported.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Glossary: settings profile, and "profile" among the words with more than one meaning (#6237)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: new strings in a pending locale file, not the catalogs (#6237)
New UI strings now go to assets/locales/pending/ (CONTRIBUTING.md), so
this pull request no longer edits the shared catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Preferences snapshot: compare the toolbar, favourites and profile too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: keep a command's several keys (#6237)
Since a command can have several keys (#6288), the keymap saves a list where it has more than
one. A profile's checks only took a single key, so saving or importing a profile dropped such a
command's shortcuts. They now read the keys as the keymap does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Settings profiles: Arabic, Hebrew and Vietnamese strings (complete catalogs) (#6237)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Tripper <tripper@localhost>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #8927
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Dialogs: a pre-selected sketch line lying on a body edge goes in as that edge (#8927)
With a finished sketch shown, a click on a body edge that one of its lines
lies on picks the sketch line. Fillet and Chamfer take edges and no sketch
curves, so the pre-selection found no input to fill: the tool opened with
Edges empty and the selection was dropped, and only a second click with the
tool open (which picks the edge) made it work.
When nothing in the dialog takes a pre-selected sketch curve but an input
takes edges, look for the body edge the curve lies on from end to end
(display polylines, with room for a curved edge's chord sag) and take that
edge instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Preferences > Graphics > Viewport gets a Field of view row under Perspective view: the UI kit's
slider in degrees, 15 to 90, dragged or typed and kept to whole degrees, enabled only while
Perspective view is on. The preference is perspective_fov, in radians (default 0.6, about 34°,
so the default view draws exactly as before), and Restore Defaults puts it back.
One place decides the angle the view is drawn with: SolveApp::view_fov(), the preference with
Perspective view on and 0 with it off or while a sketch is open. A saved value outside 15°-90°
reads as the default. projection and fit_bounds read it (fit_bounds' second hard-coded copy of
the 0.6, tan(0.3), now goes through Camera::half_height), and so does the headless fit.
perspective_view() stays, as view_fov() > 0, so #4291 needs no change.
When the angle changes from one perspective angle to another, the camera's distance scales by
tan(old/2) / tan(new/2), with a running view animation's ends, so the target keeps its size and
the slider changes the depth, not the zoom. prefs::follow_view_fov does it once per frame and
after ui.prefs, Cancel and Restore Defaults; a parallel view keeps the last perspective angle,
and while Render is open the camera is Render's own, so the change waits for the design view.
The Render workspace's Perspective check box turns perspective on at the preference's angle,
not π/4; a saved render setup keeps its own. ui.prefs takes perspective_fov and refuses values
outside the range; ui.camera reports the angle the window draws with, and checks a replayed
camera against it, so its reply still replays. Field of view is in en, ar, de, he, ja, ko, vi and zh;
the ui.prefs settings list in docs/control-protocol.md and the guide's tour describe it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>