* Update Links reads again only the linked designs that changed (#5606)
Update Links read, evaluated and STEP round-tripped every linked design on every run. Remember a digest of each linked file, of the STEP it gave and of its face names, and skip a link whose file, bodies and face names are all unchanged. Read a linked design through its saved model when the file has one, as opening it does.
* Drop an import the rebase left unused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7350
* Report a bug: Retake rebuilds the details instead of refusing, and keeps the screenshot (#7350)
Once anything changed with a report open, every Retake refused with "Settings or model
changed. Close this draft…", and each refused, waiting, timed-out or stale capture deleted the
screenshot the draft had. Retake now rebuilds the technical details for the current view
(keeping what was typed, edited details and a crash draft's body) and re-baselines before it
captures; the screenshot is replaced only when a new frame is accepted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Arabic and Hebrew for the new strings
ar and he are complete catalogs on main now (#3458): every new message
needs them. The pending-messages test compares right-to-left messages in
display order once #7532 lands (#7527).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Vietnamese for the new strings
Vietnamese became a complete catalog on main (#5823), so every new English
message needs it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The default view sends the single pixel's ray through a box edge, which the
raytracer rejects as an ambiguous interface normal. The job then ended Failed
whenever the render thread got ahead of render.cancel (about 7% of runs under
load), and the test only accepted Cancelled or Completed. Render off-axis so
the outcome no longer depends on that race, and print the phase and error if
it ever fails again.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7148
* Lost GPU: a dropped frame no longer crashes the window's close (#7148)
On a lost device wgpu's present and discard return early and leave the
acquired frame's image in the surface, holding a swapchain acquire
semaphore. Dropping the surface later (the window closing for the
restart after the loss) then panicked in wgpu-hal. The painter now holds
the frame as AcquiredFrame, which destroys a second handle to the
frame's texture after the frame is presented or dropped; wgpu-core's
destroy of a surface texture takes the image back without checking the
device, and does nothing once a present or discard took it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7077
* Repeat Last Command in command search, with a key you can change (#7077)
Shift+R already started the last tool or dialog again (#3045), but it was a
key the app kept for itself: command search could not find it and Keyboard
Shortcuts could not change it. It is now the command edit.repeat, with
Shift+R as its default key. A call through the engine is refused, because
only the app has a tool to start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Arabic and Hebrew for the new strings
ar and he are complete catalogs on main now (#3458): every new message
needs them. The pending-messages test compares right-to-left messages in
display order once #7532 lands (#7527).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Vietnamese for the new strings
Vietnamese became a complete catalog on main (#5823), so every new English
message needs it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6533
* Sketch: add points to an existing spline (#6533)
A spline could not take more points after it was drawn. The new command
sketch.spline.insert_point inserts a fit point on the curve where it
passes nearest a spot, between its neighbours, or adds a new first or
last point. Existing points keep their indices, so constraints stay. A
right-click on a fit point spline offers Add Spline Point at the clicked
spot. Control point splines are refused for now: with uniform knots one
more control point would reshape the whole curve.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Arabic and Hebrew for Add Spline Point
ar and he are complete catalogs on main now (#3458). The pending-messages
test compares right-to-left messages in display order once #7532 lands
(#7527).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Vietnamese for the new strings
Vietnamese became a complete catalog on main (#5823), so every new English
message needs it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7219
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History: delete a folder with its features, and suppress a whole folder (#7219)
`timeline.delete` and `timeline.suppress` take `groups: [timeline folder ids]`:
every feature in those folders and their nested folders, in one undo step.
A delete takes the folders themselves too; `timeline.ungroup` still keeps the
features. The History on the left offers Suppress/Unsuppress Selected Folders
and Delete Folders and Features… (asking first, like Delete Selected
Features…, when something outside needs them); a folder whose features are
all suppressed is drawn faint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* History folder actions: Arabic, Hebrew and Vietnamese strings (complete catalogs)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6981
* Drive Joints: say why a rigid joint can't be driven and offer Edit Joint (#6981)
Drive Joints opened on joint 0 when no joint moved, and its preview ran
joint.drive on that rigid joint, so the dialog showed a red "a rigid joint
does not move" with a Create Issue button.
The dialog now says a rigid joint holds its parts still and how to let them
move (Revolute to rotate, Slider to slide, Cylindrical for both), with an
Edit Joint button that turns it into Edit Joint on that joint. Its commands
refuse a rigid joint, so nothing is previewed and OK stays off. A rigid
joint picked in the browser opens Drive Joints on it to say the same; the
joint box lists only joints that move. joint.drive's own refusal names the
types that move and joint.edit.
* Drive Joints: the rigid joint message in Arabic, Hebrew and Vietnamese (#6981)
Main now delivers ar, he and vi complete, so every new message needs them.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* claim: #7395
* Sketch: a circumscribed polygon stays regular when dragged (#7395)
Circumscribed Polygon held its sides equal and tangent to the support
circle only. Equal sides round one circle leave every other corner free
(a rhombus round a circle), so a hexagon had 9 degrees of freedom instead
of 4, and dragging its centre or a corner pulled it out of shape (radius
10 became 8.02, angles 174/66 degrees).
Its corners now also lie on a construction circle concentric with the
support circle, which makes it regular as an inscribed polygon is, and
one side is tangent to the support circle, which sets its size: dof 4
(centre, size, turn). One tangent rather than all of them, so no
constraint is redundant.
Test in sketch_ux_tests: 4, 5 and 6 sides, dragged by the centre and by
a corner, stay regular with their sides on the support circle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A point a distance from another point on the same line has two places on it, the same distance
either way. A solve after a value edit or a link move could land on the other one and report the
sketch solved, with no warning: the point jumped to the other side of its anchor, twice the
distance away. Such a distance is now an orientation the solves keep, like an unsigned offset's
side: which way along the line the one point lies from the other. One point must be on the line
by a constraint (an end, a point held on it, or coincident with either); the other may lie on it
by what else holds it (the mirror image of a point on it across a line square to it), read where
it is in the reference state.
Test: a point 3 mm along a linked rail from a point held on it, or mirrored onto it: the image
back past that point counts as a flip, and the rail walked far keeps the side.
Fixes#7506.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6804
* Sheet metal: a base or contour flange hides its sketch (#6804)
Only an Extrude or a Revolve counted as using its sketch, so the sketch of a
base flange stayed shown. Its line on the plate's bottom edge lies exactly on
that edge and took the Flange dialog's click: a sketch line makes a contour
flange, a separate flat wall with no bend whose Flip moves it into the plate.
A base or contour flange now uses its sketch as an Extrude does: hidden unless
shown on its own, and shown while its feature is edited.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
* Sheet metal: test that a click on the bottom edge makes an edge flange (#6804)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The merge queue ran the four-shard GPU path tracer tests (about 56 runner-minutes)
on every group. Now they run when the diff touches render code (crates/render,
crates/gpu/src/path, the render workspace UI, assets/render), or a pull request
carries the new render-tests label (a pull request or a group holding one). The
nightly and manual runs still always run them; a push to main does not.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Typed contracts for the cylinder, sphere, torus, pipe, bounding solid and scale
Contracts for solid.cylinder, solid.sphere, solid.torus, solid.pipe, solid.bounding_solid and
solid.scale, with `FeatureResult` output, and the shared types `AxisDir` (calling
`cmd::axis_dir_form`, split from `axis_dir_param`), `NumberExpr` and `ScaleFactors`. The
descriptions say what the evaluation does: the limits it enforces, the real default scope of
`targets`, and where `participants` overrides a key or has no effect. Scale makes no body, so it
declares `name` and `participants` itself. Box's descriptions get the same corrections. The
reply test runs every form in Warn and checks for no `param_warnings`; the guide lists the new
types and adds lessons from the conversion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Typed contract for the cone
`solid.cone`, added on main beside the primitives this PR converts, gets its contract and
`FeatureResult` output: the cylinder's keys plus `top_radius` / `top_diameter`, with the
evaluation's limits in the descriptions (a radius above 0, a top radius of 0 or more, a height
that is not 0 and may be negative, sizes within 1e7 mm). A `null` top radius stays the handler's
to refuse, since the handler takes it beside a `top_diameter`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4860
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Graphics: the window no longer waits for Direct3D 12 shader compiles (#4860)
On Direct3D 12, wgpu compiles every pipeline's shaders with FXC when the
pipeline is made, and nothing is kept between launches, so the window
waited seconds for the viewport.
- The GPU tessellation shader, most of that time, compiles on a thread of
its own. Bodies are built on the CPU until it is ready, then drawn from
their plans; where it never compiles they stay on the CPU, as before.
- The viewport's pipelines build in parallel, one job per fragment shader
(solidcraft_gpu::concurrent). A job that errs, panics or cannot start
runs again on the calling thread, so errors reach the caller's scopes.
Threads only on Vulkan, Metal and D3D12 with FXC.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7327
* Trackpad: inertia stops when Shift changes mid-orbit (#7327)
macOS sends the inertia after the fingers lift as its own scroll bracket,
with the modifiers held at the time. Each move was routed by its own
modifiers, so releasing Shift while an orbit coasted turned the rest of
the inertia into a pan (and pressing Shift turned a coasting pan into an
orbit). A bracket that starts as the fingers' one ends now keeps the
fingers' mode and ends when the modifiers change. Switching between pan
and orbit while the fingers are down works as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7225
* fix: headless pictures no longer keep the previous picture's highlight
Capturer::rgba_highlighted left the highlight slot empty when a picture had
no highlight. The renderer keeps its last highlight scene while the slot is
empty, so a selected edge's band drawn for one picture showed in the next
one on the same capturer. The depth tests share their capturers across test
threads, so they failed at random: an edge "192 of 612 px drawn", a washer
showing through its plate, a cut showing what lies behind it. A picture now
always gets a highlight scene of its own, empty without one.
Clearing the leak showed that a_selected_edge_on_a_grazing_face_draws_whole
passed at 88 degrees in a design of radius 30 only by counting the leaked
band: its reference line lies 143 mm behind the sheet's middle, past that
design's far plane, and drew nothing. The small design now holds the edge.
New test: a_picture_without_a_highlight_shows_none_of_the_one_before.
Full `--test depth` runs on Apple silicon: 10 of 10 failed before, 0 of 20
after.
* claim: #7274
* Renaming an imported body with numbered siblings evaluates nothing again
Since #2467, Model::rename_body evaluates the design whenever another body's
name is worked out from the renamed one's (`X (2)`). Every STEP import whose
solids share a label has such names (`Part`, `Part (2)`, ...), so renaming
one of its bodies re-read the import and meshed every body again.
body.rename keeps the names of a body's siblings and of later bodies named
after it, so for a body no later feature changes (the same mesh from the
feature that made it to the end), renaming it in the model gives the names
evaluating the renamed design gives. That case is followed again, as before
#2467; bodies later features change still take #2467's checks.
* claim: #7192
* Web app: Report a bug saves its screenshot as a download (#7192)
Save screenshot… wrote the PNG with image's save, that is std::fs, which
the browser doesn't have. The screenshot is now encoded in memory and
written through vfs, as every other save is, so the web app hands it out
as a download. Natively the same file is written and ui.screenshot
replies as before. A failed save says why in plain text instead of a
Rust debug value.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web app: a screenshot without a path no longer panics (#7192)
`ui.screenshot` without a `path` saved to `std::env::temp_dir()`, which panics on
wasm32-unknown-unknown (std has no file system there), and the web app's control
requests come through `window.solidcraft.request`. `vfs::temp_dir()` now returns
`vfs::BROWSER_TEMP`, a folder of the in-memory files, in the browser, and
`save_screenshot` and `vfs::design_folder_refusal` (reached when a request names
`allow_paths` while a design is open) use it. Natively nothing changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Web app: keymap and theme exports download (#7192)
Both exports wrote with `std::fs::write`, which always fails in the browser. They
now write through `vfs::write` like the other saves, so the web app hands the file
out as a download. Natively the file is the same; an agent's folder scope now
applies to them as to every other write.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Tests: say what the folder-scope checks of the saves show (#7192)
The screenshot test wraps the write in a folder scope by hand: that proves the write goes through vfs, not that ui.screenshot's write runs inside the request's scope. ui.screenshot checks the agent's folders when the request arrives; the PNG is written in a later frame, outside that scope, as on main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The seat of a subscribed connection on the DesignWatch lived in the
connection's serve thread. It left only when that thread saw the end of
the stream, so one unbounded blocking read stood between a closed client
and the count. Under load (GPU backend probing and crash-dump children
on Windows) that read can sit for seconds; the test's 10 s deadline then
expired and `!WATCH.subscribed()` failed (#7226).
Move the seat onto the events thread. The thread ends on `stop`, or on
the first write a closed client refuses, so the next publish retires the
seat. The test now publishes while it waits, and its wait no longer
depends on the serve thread.
Neither theme set the File view's rail colours, so SolidCraft derived the rail from the accent and
the start page's whole sidebar was the primary orange, against the design system's one-or-two
ember budget (#4868 derives an unset rail from the accent). The rail is now n0 (void, beside the
app bar), its hovered and open row n3 (raised), and its text n11.
Session::refresh evaluated the model and then solved the joints, which
writes the solved placements into the design. A feature that reads where
a part is placed kept the result made for the placement before the
solve: a mirror of a jointed part's body, made from the root, ended up
4 mm below the part after a move the slider took back.
When the solve moves parts, the model is now evaluated again for the
placements the design holds, and the joints solved for that model, at
most three rounds. Features that don't read placements come from the
cache.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A tangency at a point the two curves share (or a line's end held on the round) is solved as a
block of its own, and the orientations a solve keeps left it out. When a point placed by
parameters moved far, the line could land on the other tangent from its far end (its mirror
image) with every constraint met and no warning. It now keeps the round's side of the line, as a
tangency away from the ends already does: kept where the move can be walked there, reported as
a flip where it can't.
Fixes#7428.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7206
* Browser: a body's name hides the body, not a sketch of the same name (#7206)
`browser.visibility` looked a key up as a feature first, so when a sketch
had exactly the name of a body (a sketch named after the body it makes),
the body's eye in the browser hid and showed the sketch instead, and the
body could not be hidden at all. The browser names a sketch by its id and
a body only by its name, so a name that is exactly both now names the
body. The sketch still hides and shows by its id; matches that differ
only in case are left as they are (#6967, #7004).
Fixes#7569 too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01FN5eEMrqWWXqi65FcK8GXq
---------
Co-authored-by: sascha2101 <221609842+sascha2101@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7131
* feat: Complete the French UI catalog (#7131)
- Add the 1,153 messages missing from fr.json as a pending fr block
- Keep the terminology already used in fr.json and French typography
---------
Co-authored-by: P'tite Tête <asso@ptitetete.com>
* claim: #7171
* Report a bug: take the screenshot once the preview is done instead of giving up (#7171)
A report opened while a preview was being computed took no screenshot
and asked to be reopened, which loses what was typed. It now waits for
the preview with the report open and takes the screenshot as soon as it
is done; after 10 s it shows the preview unfinished and says so in the
report (a hanging preview is often what is being reported).
The preview the report waited for belongs to its context unless the
design, the dialog or the selection changed meanwhile, so the retake
check compares those alone. What is typed while the capture hides the
report waits for it, and its focused field gets the focus back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report a bug: keep the new helpers apart from the other report changes
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Report a bug: keep what is typed as the waited-for screenshot is taken
The screenshot a report waits for starts in the frame the preview
finishes, before the form is drawn, so what was typed in that frame went
nowhere. It is now held with what comes while the form is hidden. The
report's context also leaves the dialog's own state out: a preview error
the dialog shows meanwhile (a sketch fillet's) no longer counts as a
change that refuses the screenshot, since it is often what is reported.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7188
* macOS menu: disable design commands behind an open Report a bug draft (#7188)
The native menu bar kept running its actions while a Report a bug draft was
open, although the app's own toolbar and shortcuts wait behind it: Edit > Undo
or Cmd+Z removed the last feature, so the report described a design that no
longer existed. FileAction::enabled now refuses every action but Quit while a
draft is open. Settings, Keyboard Shortcuts and Agent Chat are refused too:
their windows open over the report but take no input until it closes. The
menu's Undo and Redo still go to a focused report field
(FileAction::menu_enabled), which no longer leans on Settings being enabled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Menus: Quit and Help's windows wait behind an open Report a bug draft
Quit switched to the first design with unsaved changes under the draft and
asked about it in a prompt that can't be answered while the report blocks
the app; with nothing unsaved it quit and lost the typed report. Like any
modal window, the draft now turns Quit off. Help's items that open a
window (About, Keyboard Shortcuts, Messages, Crash Reports, Connect AI
assistants) wait too, in the native menu and in the app's Help menu;
Documentation and Report an Issue… stay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7190
* Report a bug: focus the empty description once, not every frame (#7190)
After Continue on GitHub found What happened? empty, the form moved the
focus back to it on every frame, so typing in Summary went into the
description. Continue now re-arms the one-time focus (and scroll into
view) instead; the other fields stay free to type in.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #1156
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Startup tests: start the backends the app would, no OpenGL driver on Windows (#1156)
The software-adapter test enumerated every wgpu backend and the probe test
asked OpenGL on its own even where the app stops at D3D12, so both loaded the
GPU vendor's OpenGL driver (atio6axx.dll on AMD) into the test process, where
it once aborted the process at exit with c0000409. The adapter test now starts
what the software renderer starts (D3D12 alone on Windows) and the probe test
probes in the app's order, stopping at the first backend with a GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Startup tests: read the software renderer's backends from wgpu_options
Review: the adapter test now takes the backends from the app's own
wgpu_options(true, None) instead of a copy of its choice, and the probe test
no longer re-checks the order choose_backends' own test covers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7281
* cargo xtask skills: check the files as Git stores them, on a CRLF checkout too (#7281)
A Windows checkout with core.autocrlf gives AGENTS.md and the SKILL.md files CRLF line endings,
so `front_matter` found no `---\n` and every skill was reported, and each line's `\r` counted
towards the size caps. The check now reads the files with CRLF taken as LF, as #4960 did for
icon_audit. The new test checks a CRLF skill filled to the cap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7299
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a circle centred on an existing point shows its Coincident glyph (#7299)
The centre circle tool sent a centre snapped to an existing point as that
point's id, so the circle shared it: attached, but with no constraint and so
no glyph to see, pick or delete. A plain point snap now goes as its place,
where `connect` ties the new centre to the point with a Coincident the sketch
draws. Midpoint, on-curve, crossing and body-vertex snaps still go as refs,
so the centre stays held there (#3099 keeps passing).
Fixes#7299
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Claim: centre arc on an existing point shows its Coincident glyph (Refs #7299)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: an arc centred on an existing point shows its Coincident glyph (Refs #7299)
The Centre arc tool sent a centre snapped to an existing point as that point's id, so
the arc shared it with no constraint and the sketch drew no glyph. A plain point snap
now goes as its place, where draw's connect ties the new centre with a Coincident;
midpoint, on-curve, crossing and body-vertex snaps still go as refs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7156
* Highlight the selected sketch in the viewport (#7156)
Picking a sketch in the Browser or the timeline selected it, but the
viewport lit nothing: the highlight only drew the bodies and faces a
feature made. It now draws all of a picked sketch's curves in the
selection colour, over the model and also while the sketch is hidden,
so a sketch is easy to find without hiding and showing it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7348
* Report a bug: include the Messages log and other failing features (#7348)
About half of the reports say "No command error was recorded" and often
can't be reproduced. The error was often in the Messages log, or on a
feature that was neither selected nor the latest. The technical details
now list every failing feature (id, name, kind, error; at most 10) and the
last 8 messages with level and age. Each entry is one quoted line of at
most 300 characters, with the home folder shown as ~.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6977
* Open from computer: let iOS and iPadOS pick .solidcraft files (#6977)
The iOS file picker matches an input's accept list by system file type,
not by extension. No system type has the .solidcraft extension, so the
designs were greyed out. On an iPhone or iPad the file inputs now offer
every file; other devices keep the extension filter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7007
* A surface left without a configuration is configured again, not a crash (#7007)
wgpu reports device-loss errors to no error scope. On D3D12 a driver reset
found by Surface::configure drops the old configuration and reports nothing,
so the surface was taken as configured and the next acquire panicked with
"Surface is not configured for presentation". A configure that meets a lost
device or an unsupported surface is now a refused configure, the acquire runs
under an error scope, and its Validation status reconfigures the surface.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
model_render_follows_the_grid_and_origin_switches_unless_asked compares nine
renders byte for byte and has failed once in a full run without coming back
alone. A mismatch now names the step, counts the differing pixels, lists the
renderer that drew each picture and keeps both PNGs.
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The value box beside a command's geometry and the placement fields kept a number's width, so a
formula or parameter names scrolled out of sight while typing. They keep that width for a number
and grow with the text, up to three times it.