Commit Graph
3660 Commits
Author SHA1 Message Date
Kushagra Kumar 446590dca1 fix(engine): report design variant in timeline.inspect and accept in timeline.add (#10748) (#10792)
* fix(engine): report design variant in timeline.inspect and accept in timeline.add (#10748)

* ci: refresh checks to clear cancelled workflow run
2026-11-01 21:00:44 +00:00
303236e524 Tests: io's byte mutator moves to a testkit crate, a dev-dependency only (#5184) (#7682)
* Tests: io's byte mutator moves to a testkit crate, a dev-dependency only (no behaviour change)

`solidcraft-testkit` (the Testkit class xtask/src/layers.rs reserves) holds the mutator and the
no-panic check unchanged: the same seeds, mutations, budget and doc comment. io's reader fuzz
tests use it as a dev-dependency and give the same case counts; the mutator's own test moves
with it. The co-editing wire's decoders will fuzz with it too (#5184, CE6).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Cargo.lock: testkit at the workspace version

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-01 20:28:58 +00:00
bherbruckandClaude Opus 5.5 97336ccfe7 Kernel pause: pull requests are judged by the kernel directories they change (#10807)
A pull request outside crates/kernel, crates/geom and vendor/truck* is no longer labelled for a
kernel word in its title. Issues and discussions keep the title check.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 20:19:41 +00:00
cronos e1d4cb433c Cover sketch line-arc fillets in both selection orders (#10242) 2026-11-01 20:19:16 +00:00
Thodoris Tsagkogeorgas 0ad74f2577 Revolve: keep the angle grab point when the sweep is zero (#9601) (#9602)
A revolve of 0° still builds no solid. The handle stays on the profile so the angle can be dragged back into range.
2026-11-01 20:18:27 +00:00
semmelrindeandClaude Opus 5.5 835e261593 Coil: up and down arrows on the Revolutions field (#7481) (#7766)
* claim: #7481

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Coil: step arrows on the Revolutions field (#7481)

The Coil dialog drew Revolutions as a plain expression row, the one
count without the step arrows the pattern quantities have. It is now a
count row from 1 to 200 turns (the helix's limit); a fraction still
types in, and an arrow steps it to the next whole turn.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 20:12:56 +00:00
github-actions[bot] 84c3b6356c Regenerate generated files and fold pending files [skip ci] 2026-11-01 20:42:12 +00:00
github-actions[bot] d730a273dc Regenerate generated files and fold pending files [skip ci] 2026-11-01 20:33:03 +00:00
semmelrindeandClaude Opus 5.5 89cb651084 Warnings: quote a long generated name by its start and end (#8673)
A chamfer's warning quoted the full generated names of fourteen split edges,
122,701 characters (#8541). Names over about 80 characters are now quoted by
their first 48 and last 24 characters.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 20:12:42 +00:00
Kai Evans 9efcb461f8 Feature edits: OK computes off the window thread in a dialog without a live preview too (#7388)
Offset Plane and a cosmetic Thread have no live preview, so their edits' OK ran on the window
thread and recomputed every later feature there. Any edit now goes through the off-thread
transaction. The editor's pinned original is used only while the dialog previews, as
open_feature_edit keeps it: a Thread switched from Modeled to cosmetic edits the design as it is,
so a body hidden meanwhile doesn't refuse it as a changed design.
2026-11-01 20:11:05 +00:00
DanielandClaude Opus 5.5 958ab867cd Press Pull on a chamfer or fillet face edits it where you clicked (#4986) (#9771)
* claim: #4986

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Press Pull on a chamfer's face changes the chamfer's distance (#4986)

A chamfer's face is flat, so solid.press_pull and the Press Pull start
path in the UI took it for a planar face and extruded it. Both now look
for a fillet's or chamfer's face before asking whether the face is
planar, so a chamfer's face reopens the chamfer and its distance grows
by the distance pulled, as a fillet's radius already does. A first pick
with Press Pull already open is routed the same way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Press Pull on a blend face puts the arrow on the edge clicked

A fillet or chamfer reopened by Press Pull from one of its faces drew
its radius or distance arrow on the feature's first stored edge, which
can be a corner the user did not click and cannot see (the Sample
Plate's fillet, from the far corner). The click's point now goes with
the reopened dialog as a hint that is never saved, and the arrow sits
on the feature's edge nearest it, at the point on that edge nearest the
click. Opened any other way (the history, Edit Feature) the arrow stays
on the first edge as before.

A click point that is not finite is not kept, and a point on a flat face next to a chamfer still extrudes that face (tested).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 20:11:00 +00:00
Jesper We cffa6e1580 Loft and Surface Loft: two sections from one sketch (#8221) (#8222)
* claim: #8221

* Loft and Surface Loft: two sections from one sketch (#8221)
2026-11-01 20:10:13 +00:00
semmelrindeandClaude Opus 5.5 ce296a1ad5 Extrude preview: a round face sweeps round walls, with lines up its corners only (#8838)
The live preview of extruding a picked face built its walls from the
face's display triangles and drew a line up the wall at every boundary
point, each wall piece shaded flat. A round face (the Bolted Flange's
flange) looked like a polygon while extruding. Lines now go up only
where an edge of the face ends and the outline turns there more than
its curves do, and a wall's normal turns with it between smooth pieces.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 20:09:21 +00:00
semmelrindeandClaude Opus 5.5 0515dee9ce Colour popover: a held step button keeps stepping, and R, G and B have tooltips (#10201) (#10203)
* Colour popover: a held step button keeps stepping, and R, G and B have tooltips (#10201)

The step buttons beside each colour number sensed clicks only. egui
stops counting a press as a possible click once it outlasts its longest
click (0.8 s), so the held button stopped repeating after 8 steps. They
now sense drags too, which keeps a long press down on the button until
it is let go.

R, G and B now carry tooltips (Red, Green, Blue) as H, S and V already
did: a single letter doesn't name the colour in every language.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Colour popover: the R, G and B tooltips in Vietnamese too, a complete catalog (#10201)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 20:08:43 +00:00
VvynotandClaude Sonnet 5 0478f7e401 Hole: reference Distance shows the document precision (#10693) (#10777)
* Hole: reference Distance shows the document precision (#10693)

A measured reference distance showed the raw float (10.000000868569572 mm).
The field now reads at the document's length precision while Refs keeps the
measured value for the model, so OK still sends what was measured.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

* Hole: restored literals use the document precision (#10693)

Round every literal reference distance on Edit Feature, including comma
decimals and exact whole values; expressions stay as written.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5 <noreply@anthropic.com>
2026-11-01 20:05:49 +00:00
Rec0iLandClaude Fable 5.1 52f0b52b45 Agent chat: a searchable model picker with a custom entry, listed from every provider, and OpenClaw and OpenRouter presets (#2582) (#10255)
* ui_kit: search_picker, a filtered dropdown with a custom entry

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: endpoints list their models with names, say when listing fails, and OpenClaw and OpenRouter presets (#2582)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: a typed model goes to endpoints and to agents that offer a model option

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: the header's model pickers search and take a custom model

The popup can't grow once it is open, so search_picker now fixes the height of what changes below
its box when it opens: the custom row or a late list could otherwise end up out of reach.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* AI preferences: pick an endpoint's model when adding it and on its card (#2582)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: model picker rows read from the left, and a refused typed model says which

From running it: list_picker centres its text, which reads badly for a long list of ids, and an
agent's own refusal can say no more than "Internal error". The search box also asks for a repaint
while it waits for the focus, so an idle window does not stop short of it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: docs for the model picker

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: an endpoint's answer that is no model list says so, an empty list too, and editing lists with the kept key

A 200 without a `data` array (a web page where the endpoint should be, as OpenClaw's gateway
serves until its chat endpoint is enabled) was cached as a successful, empty listing, so the
picker stayed blank with nothing to say and never asked again. Now it is an error with its own
note, an empty list says so, and both are asked for again the next time.

The Edit dialog lists its endpoint's models when it opens, with the kept key read from the
keychain on the listing's thread, as the card does; the key stays out of the field.

The method-not-found test expects the refusal notice that names the model, as every refused
model gets since this branch.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Agent chat: models from several providers fold under their providers inside the picker

As Chemiseblanc does in #10187: with two or more groups, `search_picker` draws each group as a
header with a chevron, the name and how many of its choices are listed, and a click folds or opens
it. Before anything is typed only the current value's group (and the one the caller asks for) is
open; a group with a match opens once something is typed; a fold made by hand stays until the popup
closes. Enter takes the first row shown, so never one folded away. A lone group keeps its plain
heading.

The header's model picker feeds its providers in as groups, so the separate provider drop-down
goes; the control channel's `provider` now says which group opens first. A header click gives the
focus back to the search box, so typing goes on filtering.

The dialog's listing test checks what kind of listing it got rather than translated words, which
the listing thread may render in another language than the test's.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Agent chat: rustfmt the provider groups

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Agent chat: an endpoint's models named `Vendor: Model` fold under their vendors

OpenRouter lists `openai/gpt-6.1-terra` as "OpenAI: GPT-6.1 Terra". A listing whose ids read
`vendor/model` and whose names read `Vendor: Model` now names its providers, so the picker folds
it under its vendors like a multi-provider agent; the rows read the model's name, and the id stays
in the tooltip and in the search. An agent's own `Provider: …` word still comes first. One vendor
is one flat list, as before.

The Add dialog's picker has no current model to prefer, so with nothing to prefer every group
starts open; folding is a click away.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 20:01:26 +00:00
ABDULLAH 1ae93218a7 Arabic: outline term in the cut preview tint help (#10801) 2026-11-01 19:50:21 +00:00
P'tite TêteandP'tite Tête 3017641b41 fix: Projection d'une silhouette à congés coniques fermée en un profil (#10773)
- snap_tangent_arcs : chaque extrémité d'arc prend la ligne la plus proche
- une ligne ne prend qu'une extrémité d'un arc ; l'autre passe à sa ligne suivante
- une ligne plus loin sur le contour est ignorée quand l'extrémité touche déjà une autre pièce
- tests : 4 unitaires (project_order.rs) et the_silhouette_of_conic_rounds_closes

Co-authored-by: P'tite Tête <asso@ptitetete.com>
2026-11-01 19:41:32 +00:00
github-actions[bot] 17b9a8e67f Regenerate generated files and fold pending files [skip ci] 2026-11-01 19:55:56 +00:00
github-actions[bot] 90c09eaaf9 Regenerate generated files and fold pending files [skip ci] 2026-11-01 19:48:16 +00:00
251573a5a4 MCP: compare the model with a reference picture (#1486) (#6416)
* claim: #1486

* Compare picture: overlap and edge offsets of the model against a reference picture (#1486)

inspect.compare_picture lays the model's silhouette over the part found in a
PNG or JPEG and slides it to the best overlap: overlap (0..1), the model's
edges against the picture's in mm at nine stations, and an overlay PNG. The
MCP tool compare_picture runs it and hands the overlay back as an image block.

inspect.silhouette grows a reusable silhouette::outline for the model side.

* chore: re-trigger checks (defaults line already present in PR body)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* i18n: carry the Compare Picture label in Arabic, Hebrew and Vietnamese too

The complete-catalog guard (every_complete_catalog_carries_every_english_message)
failed because the pending file covered only en/ja/zh; ar, he and vi are
complete catalogs and need the key as well.

* Compare picture: one uniform scale, capped fit, sturdier part finding

Review on #6416: fit no longer stretches the axes apart (width is the default,
both scales uniformly by width and reports aspect_mismatch); the fitted model
takes the same MAX_GRID cap as the picture; the border flood seeds only from
border pixels near the border's main colour, reads alpha, retries at a
stricter step, and says which case failed; the slide searches the whole
placement range instead of a tenth around the centre; the model's holes get
the picture's fill rule; crop becomes crop_px / crop_fraction with explicit
units. Pins #1486's bracket (overlap 0.865, bottom -10 mm at the upright) and
adds a regression test per problem.

* Compare picture: alpha only for a see-through border, part_fills_crop, outline-only wording

Review re-test on #6416: one translucent backdrop pixel no longer switches the read to
alpha — alpha decides only when most of the border is see-through, and any ink is then
part, so a part drawn at alpha 100 survives; part_fills_crop: true takes the crop box as
the part itself, for one view cropped tight off a board where the part takes most of the
border and the flood would keep the backdrop strip instead; a third backdrop pass compares
each pixel to the border's main colour, so a white part on (245, 245, 245) JPEG at quality
75 separates; the command, tool and docs descriptions now say the compare is outline only:
holes are not compared. A banded light backdrop stays a follow-up. A test per case.

* MCP compare: format the picture tests

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-01 18:30:18 +00:00
Nathan Dane bdce595fb3 Render results: retained renders, Live and render compare, render all shots (#6281) (#7375)
* Render results: keep up to eight completed renders and select or discard them

* Render results: Live and render compare with a divider, and render all shots

* fix: use comparison theme tint and reveal reset test targets

* fix: restore Unicode expectations in render workspace tests
2026-11-01 18:30:11 +00:00
semmelrindeandClaude Opus 5.5 862807ffc9 Lost GPU: the per-frame probe meets a D3D12 device reset before the first upload does (#6528) (#7767)
* claim: #6528

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Lost GPU: the per-frame probe opens a command list, as the upload would (#6528)

On a reset D3D12 device the empty submission before a frame's uploads
went through (it only signals a fence), and the first queue write then
panicked inside wgpu-core (PendingWrites::activate unwrapping Lost).
The probe now submits a command buffer with a debug marker: finishing it
makes the same begin_encoding call, through a path where wgpu loses the
device and runs its lost callback instead of panicking. The picture
capturer's probe does the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 18:20:40 +00:00
github-actions[bot] 6f368a5b77 Regenerate generated files and fold pending files [skip ci] 2026-11-01 19:01:13 +00:00
rbousigues88andClaude Sonnet 5.5 a0ed5a9923 Measure: a fillet's torus or a sphere reports its radius (#7159) (#7160)
* claim: #7159

* Measure: a fillet's torus or a sphere reports its radius (#7159)

The face of a fillet round a circular edge is a torus and a ball's face a sphere, which
Measure listed by area only. Their face item now carries radius, diameter and surface
(and the ring radius of a torus); they stay out of Shape, so distances are unchanged.

Fixes #7159.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-01 18:03:17 +00:00
N3MI-DGandClaude Opus 5 38ae728538 Preview: new surface is tinted whatever its size, and the tints can be turned off (#9111) (#9112)
* claim: #9111

* Preview: new surface is tinted whatever its size, and the tints can be turned off (#9111)

A preview decided which faces of a changed body were new surface by asking
whether their triangle centroids lay on the old body, within a tolerance that
follows the part's size. A round or chamfer small beside the part never leaves
that tolerance, so it was drawn as if it had always been there, and sampling at
a fixed step told alike faces apart by nothing but how many triangles they had.

The kernel already records which faces an operation generated, so `build` takes
that record alongside the geometric test. The test stays because a body carries
the history of whatever last made it, which is not the previewed operation when
a parameter change re-evaluates the design: the record only ever adds faces to
the answer. The vote itself now asks about every centroid of a small face,
spreads a large face's samples without a resonant step, and calls a face new
above an eighth of its samples, which a blend tangent on both of its sides
reaches with the one row of facets in five that is clearly off the old surface.

Graphics gains two settings, both on as they come, so nothing changes out of
the box: Tint new surface in a preview draws a changed body as itself when it
is off, working out no face at all, and Show removed material in red leaves the
see-through cut and the ghost of the shape a feature replaces fully
transparent, drawing only their outlines.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
2026-11-01 18:02:57 +00:00
github-actions[bot] 147d1cfadd Regenerate generated files and fold pending files [skip ci] 2026-11-01 18:35:09 +00:00
github-actions[bot] d135e1659c Regenerate generated files and fold pending files [skip ci] 2026-11-01 18:26:58 +00:00
froglemonade2andClaude Opus 5.5 3ccf04d4b2 Edit Extrude: close on the first Escape (#9084) (#9757)
* claim: #9084

* Edit Extrude: close on the first Escape (#9084)

An edit dialog whose value names a parameter (`T` in Edit Extrude) opened with
that field focused and its completion list showing the longer names (`tan(`),
unarmed. The list took the first Escape, so the dialog needed two.

An unarmed list now leaves Escape to the window until the box is typed in, as
it already leaves Enter and Tab; once typed in, Escape dismisses the list first
as before. Its hint drops "Esc dismiss" in that state.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 18:02:39 +00:00
2014e60ae6 Sketch Offset: an Instances count stacks offsets one behind another (#9827) (#9828)
* claim: #9827

* Sketch Offset: an Instances count stacks offsets one behind another (#9827)

Offset made one offset at a time, so a set of evenly spaced outlines meant
running it again on the curves it had just made, once per ring: a separate undo
step and a separate driving dimension each time.

`sketch.offset` now takes `instances`, a whole number or a unitless expression
from 1 to 100 (1, today's behaviour, by default). The per-group work the command
did inline becomes `offset_rung`, and `offset_ladder` runs it once per instance,
each rung offsetting the one before it the same distance again, so instance n
stands n distances from the curves picked. Every rung of a side is driven by
that side's own dimension, so editing it moves the whole set and keeps the
spacing even, and each side of a Two Sides or Symmetric offset grows its own
ladder. A rung the shape has no room for refuses the whole command and names
which instance it was.

A later rung reads its side from the geometry, through the rung's own
normal-distance annotation, rather than from the distance's sign: an output's
stored ends need not run the way the chain through them is walked, and a
reversed walk reads the same sign as the other side. A circle is the exception
and keeps the sign, because it offsets concentrically with no chain to walk, and
a step past a ring smaller than the distance lands beyond the centre, where the
circle's "outside the current radius" side test reads as the outward side: an
inward ladder turned round and grew again (1, 4, 1, 4 mm) instead of running out
of room.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Sketch Offset: the Instances row in the offset window (#9827)

The offset window gets an Instances row under Distance: a whole number with step
arrows, 1 by default, so the count can be walked up a ring at a time and the
preview follows each step. The count is not kept in the design, as Mirror's and
Scale's values are not, so the window sends the number it evaluates to rather
than the text.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* UI kit: a count's step arrows are not text (#9827)

The arrows stand inside the editor, which asks for the text cursor across its
whole rect, so hovering one showed an I-beam and the arrows read as part of the
number. They take the ordinary cursor back after it, and the pointer is read
from the arrow's rect rather than from the hover the editor underneath competes
for, which keeps the hover highlight in step with it.

The pattern Quantity rows share this field and had the same thing.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Sketch Offset: Instances label in the complete catalogs and the other shipped languages

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Offset Instances: translations for the complete catalogs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-11-01 18:02:32 +00:00
Nathan Dane c454c05f88 Preferences redesign 1/11: design reference in docs (#9873) (#9889)
* claim: #9873

* Add the Preferences design reference: pages, figures, measurements, tokens

* Fix the selection look in the design reference to match the app
2026-11-01 18:02:24 +00:00
merikandClaude Opus 5.5 1cc90036fb File: a command for each export format, so each can have a key (#10176) (#10177)
File › Export STEP…, STL…, 3MF…, OBJ… and URDF… were UI actions around
the shared file.export, so Keyboard Shortcuts had no row for them.
file.export_step, _stl, _3mf, _obj and _urdf now do what those items do
when started from a key, command search or the menu (a save picker; Save
As Mesh for STL and 3MF), and take a path when called with JSON. The File
menu shows their keys. Each has a contract and a reply type
(schema/file.rs).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 18:02:16 +00:00
Dahak BuildsandDahak Builds 176c22acaa MCP: explain when an unknown command id is actually an MCP tool name (#10678) (#10680)
* claim: #10678

* MCP: explain when an unknown command id is actually an MCP tool name

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-01 15:36:04 +00:00
ABDULLAH 2ab5dedfc1 Arabic: pan term in the Creo navigation help (#10667) 2026-11-01 15:13:48 +00:00
Dahak BuildsandDahak Builds e77c55549f Sketch: a value box must not swallow a click on the reference line's endpoint (#10600) (#10639)
* claim: #10600

* Sketch: a value box must not swallow a click that lands on a sketch point (#10600)

The construction line tools' Length box waits beside the pointer. When the
pointer reaches the reference line's own endpoint it can land under that box
(the box is anchored to the tool hover, which freezes while the pointer rests
on the box), and the box's text edit takes the click, so the tool never sees
it. A release over the tool's own value box or construction/normal switch that
lands on a snapped sketch point now goes to the tool; a click on the box away
from any sketch point still edits the box.

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-01 13:31:14 +00:00
github-actions[bot] e7bb038795 Regenerate generated files and fold pending files [skip ci] 2026-11-01 13:27:53 +00:00
a5a561caae Add Creo Parametric navigation preset (#3507) (#9322)
* claim: #3507

Co-authored-by: Codex <codex@openai.com>

* Add Creo Parametric navigation preset (#3507)

Add middle-button orbit, Shift+middle pan and Ctrl+middle vertical drag
zoom, with downward dragging zooming in. Keep the default navigation
preset and existing presets unchanged.

Refs #3507

Co-authored-by: Codex <codex@openai.com>

* Navigation: Creo preset needs the NX preset's reverse_drag_zoom field

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Codex <codex@openai.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 12:57:15 +00:00
Dahak BuildsandDahak Builds 462de5b9d2 Fix extrude preview placement in placed components (#2103) (#10596)
* claim: #2103

* Pin #2103: extrude-cut preview placement on placed component occurrences

* Format #2103 regression tests

* Satisfy clippy lints in #2103 regression tests

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-01 12:46:17 +00:00
be425c6102 Assemblies: use lookup maps when building the world state (#10497)
* claim: Assemblies: use lookup maps when building the world state

* Assemblies: use lookup maps when building the world state

world_state_reusing, made again after every geometry command in a design
with components, filtered all bodies for every placement, searched the
timeline for every sketch and construction of a placed part, and searched
all bodies twice per tap and placement. It now builds the feature to
component map, the bodies of each component (in body order) and each
tap's component and body offset once per call. The result and its order
are unchanged.

On a 100-part assembly placed 5 times (800 sketches, 200 taps) one world
state drops from 124 ms to 9.5 ms (release, median).

A test-only counter of searches through all features or all bodies
checks that the work no longer grows with the sketches and taps.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 12:39:41 +00:00
Colin Faulkingham bc4d35b097 Avoid rebuilding bodies when rename updates feature references (#6287) (#10588)
* claim: #6287

* fix: reuse body geometry when renaming references (#6287)
2026-11-01 12:15:47 +00:00
Colin Faulkingham 78c5b8de42 Fix fastener placement on transformed washers (#9648) (#10583)
* claim: #9648

* Fix fastener picks on transformed washers
2026-11-01 12:13:41 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 9738861d61 Sketch drag: the crash test cleans up its folder like its neighbours (#10602)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 12:13:19 +00:00
ABDULLAH 0cf4da606c Arabic: one term for parameters in the equation curve and text help and the joint move hint (#10604) 2026-11-01 12:09:56 +00:00
github-actions[bot] 074cc758ee Regenerate generated files and fold pending files [skip ci] 2026-11-01 12:12:00 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 47e8b96c2f Placement digests look up bodies by name once (#10492)
A join, cut or intersect without explicit targets reads where every body
of its component is placed. Its placement digest searched the model for
each of those bodies by name, then the timeline for its component and the
placements for that component's frame: O(B^2 + B*F) per feature, on every
evaluation, also when every feature comes from the cache.

The bodies, their components (Document::model_body_components) and each
component's frame are now looked up once per digest. The bodies are still
hashed in name order with the same values, so every digest stays the same
bit for bit and saved caches stay valid.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:45:22 +00:00
Dahak BuildsandDahak Builds 7b3d84fb33 Per-component History hiding (#10393) (#10578)
* claim: #10393

* Per-component History hiding: flag, commands, Browser menu, bar toggle (#10393)

* Carry the new History-hiding strings in the complete catalogs (#10393)

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-11-01 11:42:33 +00:00
github-actions[bot] 59a40aabc0 Regenerate generated files and fold pending files [skip ci] 2026-11-01 11:43:09 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 b557f22f97 Sketch: a construction/normal switch in the construction line tools (#10258) (#10551)
* Sketch: a construction line with a length can be a normal line (#10258)

`construction: false` on a construction line command that has a
`length` makes the segment a normal sketch line, ready to close a
profile, instead of construction geometry. The default stays
construction, and an infinite line is always construction.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a length box in the construction line tools (#10258)

The horizontal, vertical, parallel and perpendicular construction line
tools show a Length box beside the pointer from the start. It stays
empty (shown as infinite) and leaves the keyboard to the tool's
shortcuts until a digit is typed; then the box takes the keyboard.
Without a length the tools work as before: one click, an infinite line.
With a length the first click sets the start and a second click the side
the segment runs to, sent as the command's `length` and `near`, so the
segment gets its length dimension. The angle tool has a Length box
beside its Angle box. A typed length keeps the start's snap, and the
preview draws the segment the click will create.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: a construction/normal switch in the construction line tools (#10258)

A Construction | Normal switch sits under the Length box of the
construction line tools. Normal sends `construction: false`, so a
segment with a length becomes a normal sketch line, ready to close a
profile, without converting it afterwards. The switch starts at
Construction with each start of a tool. An infinite line is always
construction, so without a length the switch is greyed out and its
tooltip says why. It belongs to the tool alone: the Sketch Palette's
drawing line type (X) is left as it is.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:15:21 +00:00
github-actions[bot] 29acaf8642 Regenerate generated files and fold pending files [skip ci] 2026-11-01 10:44:57 +00:00
36bdf4ea3c Sketch drag: drop the second document copy per frame (#10507)
* claim: Sketch drag: drop the second document copy per frame

* Sketch drag: drop the second document copy per frame

edit_solved copied the document to edit it, then stored it with
`*s.doc_mut() = doc`. The command's undo snapshot still holds the old
document, so doc_mut copied the whole design a second time only to
overwrite it. Store the edited document with Session::set_doc instead,
which forgets the same caches and puts it in a new Arc. The design lands
at a new address as before and the command's end records it for the
crash journal (#7502).

A live drag frame on a design of 200 sketches (20k curves) drops from
19.2 ms to 9.4 ms; 50 sketches: 2.3 ms to 1.7 ms.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 10:13:17 +00:00