* claim: #8718
* Browser: the eye sits in a column at each row's right end (#8718)
Tree rows draw the visibility eye right-aligned at the row's end, clear of
the fold arrow and the radio and of a floating scroll bar; names stop short
of it. Preferences > Interface > Eye next to the fold arrow
(browser_eye_left) keeps the old position. Rows report their control
positions so placement handles and inline rename follow the layout.
* Docs: the browser's eye column and browser_eye_left (#8718)
* Browser: the eye's tip shows by the eye at the row's end (#8718)
* Browser: a gap keeps the fold arrow and the radio apart; the eye clears a floating scroll bar (#8718)
The eye's old slot leaves a 10 pt gap instead of 4 pt, so the radio's hit
area is 7.5 pt from the fold arrow's and History pattern rows step in from
their sketch as far as browser children do. The eye's inset follows the
scroll style: only a floating bar laid over the rows takes room. Rows
publish indent:<label> where their depth puts them.
* Tests: browser depth checks run on the default layout, by indent handles (#8718)
* claim: #8993
* Reverse zoom direction no longer flips 3D mouse zoom (#8993)
The checkbox sits under Wheel and trackpad and now reverses the wheel
(and the navigation bridge's wheel-style steps) only. The 3D mouse cap
zooms by its own per-axis invert switch alone: device_camera no longer
takes a reverse_zoom argument, nor does the test model in Preferences.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8390
* Sketch modify: pick a whole profile or chain for the shared Entities input (#8390)
- Click inside a closed profile selects its whole boundary (and its holes);
double-click a curve selects its whole chain, for Mirror, Move/Copy, Scale
and the patterns. Single curves and points keep working as before.
- The mirror line may itself be among the entities: the command leaves the
line in place and mirrors the rest, instead of rejecting it.
* Mirror: the shared line case is valid, not an error (#8390)
Update the half-filled-window test: a mirror line that is also among the
entities is now accepted (the command leaves it in place and mirrors the
rest), matching the engine.
---------
Co-authored-by: Dane Doubell <2853036+danedoubell@users.noreply.github.com>
* claim: #8908
Co-authored-by: Cursor <cursoragent@cursor.com>
* Update Cancel clears the UI and stops before checksum downloads.
Drop the install job as soon as Cancel is pressed so Downloading ends
immediately, and check the cancel flag around feed refresh and
checksum GETs so a stall before the package body no longer ignores it.
Co-authored-by: Cursor <cursoragent@cursor.com>
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
* Assistant composer: the input box fills its area, and the hint stays on one line
The composer footer inset the box by its own margin on top of the box's text
padding. The footer now has no margin, so the box spans it on all four sides and
only the text padding remains. The hint is painted on a single row, cut with an
ellipsis when the panel is narrow.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assistant composer: the hint takes its colour from the theme, not a literal
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon drop-downs as a grid of large icons, as an option (#4739)
Preferences > Interface gets two settings, both off by default:
- Menus: List | Large icons. With Large icons a panel's drop-down shows its
commands as rows of up to five icons at 32 px (twice the list's), keeping
the list's group headings and order. The name, shortcut and help are in
the tooltip, as on a ribbon button. Arrow keys move across and between
rows; a click starts the command; right-click and drag pin it as before.
Resting on an icon for two seconds arms a pin in its corner; a quicker
click anywhere starts the command, so nothing is pinned by accident. A
pinned command shows its pin.
- "Leave pinned commands out of the drop-down menus": a drop-down (list or
grid) leaves out the commands the ribbon shows as buttons; a panel too
narrow for its buttons lists them again, and a menu is never left empty.
No icon artwork or colours change. Sketch > Create keeps its family list.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch > Create in the large-icon grid: every variant under its family (#4739)
With Menus: Large icons, Sketch > Create showed its family sub-menus as
plain text rows (Line, Rectangle, Circle, ...), unlike every other menu. It
now shows every variant as a large icon under its family's heading, then the
other tools under "More". The list keeps its family sub-menus.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: groups side by side, no footer (#4739)
A menu of two or more headed groups (Sketch > Create's families, Model >
Modify's Edges, Faces, Bodies, Specialise) puts the groups side by side, each
heading over a column of its icons, at most two across. Menus without groups,
or one too wide for the window, keep rows of up to five. The pinning note
under the large-icon menus goes: the tooltips and right-click menus say it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: a separator line between groups side by side (#4739)
As between the ribbon's sections: a 1 px line in the theme's border colour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: at most three rows, growing to the right (#4739)
A menu fills five columns, more when that would take over three rows (Model >
Create: 7 x 3); in grouped menus a group too big for three rows gets more
columns. Only a window too narrow for that wraps into more rows. A test checks
every panel's menu of every tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: group headings centred over their icons (#4739)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop-down group headings: smaller than the drop-down's header, not in capitals (#4739)
Edges, Faces, Bodies (and Sketch > Create's families) were drawn in capitals
at font_small, which reads larger than the drop-down's own header
(font_caption). They now use font_micro, written as named, in the list and the
large-icon grid. Review feedback on #5012.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: start a command from the grid at its icon, as main's rows do (#4739)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Ribbon icon grid strings: a pending locale file, with ar, he and vi (#4739)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Large-icon menus: commands in no group stand apart, so a left-out group doesn't move them (#4739)
With Convert to Sheet Metal pinned and left out of Model > Modify, its
Specialise group went and Delete, in no group, moved under Bodies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9332
* Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332)
`sinh`, `cosh`, `tanh` and `asinh` take a unit-less number and give one,
as `exp` does; `acosh` refuses x < 1 and `atanh` refuses |x| >= 1, worded
as `asin` and `ln` refuse what lies outside their domain. They are in the
expression help (`FUNCTIONS`, the parameter autocomplete), the
hostile-expression fuzz tokens, the parameters and equation-curve guides,
and the checking skill's list of functions. Horn flares (Salmon's hypex
`cosh h + T sinh h`), catenaries and the tractrix can now be written as
they are stated instead of expanded into `exp`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6896
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
* Sketch: find profiles island by island and say when the search is cut short (#6896)
Every live drag frame ran the profile search over the whole sketch: every
spline piece of a large imported logo was sampled, checked for crossings
and traced again, about 100 ms per frame at 6,000 degrees of freedom.
Profile curves are now split into islands whose enlarged piece boxes do
not touch (the margin exceeds every tolerance the search uses), each
island's loops are found on their own and cached by a fingerprint of its
geometry, and the loops are nested into profiles over the whole sketch in
the order a single search finds them, so profiles, ids, holes and
whole-boundary certificates stay the same. The end-near-crossing lookup
covers its whole reach, independent of the grid's cell size.
The 50,000-piece limit now holds per island, and a sketch that still
exceeds it gets a warning instead of silently missing profiles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`schema::issues(id, params)` looks up the command's typed contract and
lists what is wrong with the parameters (none without a contract or for
an unknown id). The batch preflight, the MCP bridge's pre-send check and
the app's check of a design-switching command each did that lookup
themselves; they now call it. No behaviour change.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
sketch_consumed knew Extrude, Revolve and the sheet metal flanges but not
a Hole drilled at a sketch's points, so that sketch stayed drawn inside the
holes. A Multiple hole now counts as using its sketch; Edit Feature shows
its points while the dialog is open. Single holes keep their sketch shown,
since a hidden sketch offers no points to snap to.
* claim: #9299
* Recover unsaved design?: Discard all, with a confirmation (#9299)
A Discard all button at the left of the window's footer, away from Later.
It asks first ("Discard 7 autosaves? This cannot be undone.", Discard all /
Cancel), then discards every listed autosave the way its own Discard button
does (doc.recovery_discard on each id). Cancel goes back to the list
unchanged. The button publishes the handle recovery:discard_all.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9265
Co-Authored-By: Claude Code <noreply@anthropic.com>
* Preferences: a setting in a row with no label is found by the words it shows (#9265)
A search hid a row by its label before its controls were drawn. Seven checkbox rows and two segmented rows on the Interface page have no label, so "status bar", "search results" and "reveal on hover" found nothing. A hidden row with no label now keeps the words of its controls, as a dropdown keeps its value, and is drawn when they match. Each such row has a key of its own, so its neighbours are not drawn with it.
Co-Authored-By: Claude Code <noreply@anthropic.com>
---------
Co-authored-by: Claude Code <noreply@anthropic.com>
* claim: #9195
* Viewport: an opened design is framed at the home view, in the middle of the view (#9195)
A fit the viewport cannot frame yet is kept and asked again on the next frame instead
of being consumed and lost, so a design opened from the Home screen or by launching on
a file no longer comes up at the default camera, wherever its own coordinates put it.
Framing then centres the model on the view rather than on the free rectangle between
the floating controls: `Layout` carries `middle`, the view without the panels, computed
before the compass, the navigation bar and the OK/Cancel corner join the obstacles. The
model is still sized to `drawable`, so it stays clear of every control, but only a panel
moves it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Viewport: keep the centred fit clear of the controls, and frame --sample (#9195)
The fit framed the model into a rectangle the size of `drawable` centred on `middle`, which is
not inside `drawable`, so the model could sit under the compass, the navigation bar or the
render product frame. The model is now sized to `drawable` as before, and only the room left
over in it moves the model towards the middle of the view.
`s27_move_triad` turns the Z ring on its far side: the model now sits further right, and the
Move dialog that docks on the right afterwards covered the ring's old grab point.
A launch with `--sample` builds the design straight into the session and never asked for a
fit; it now comes up at the home view, framed, like an opened design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Viewport tests: the cursor orbit's pivot keeps the pixel it was picked on (#9195)
With the model now centred on the view, one of the test's perspective drag points lands within
the pick tolerance of the box's top edge, and the pick snaps the pivot onto that edge, a few
pixels from the cursor. The orbit keeps that point still, as it should; the test compared it
with the cursor instead of with where it started.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Both commands need a choice, but start_with_variant_memory only special-
cased the parameterless display toggles, so a click on the ribbon (or
command search, a shortcut, ui.start) ran them with {} and showed only
the engine's "style must be ..." / "tool must be ..." error.
They now open a short menu, the way Units does: under the ribbon row
that started it (a second click closes it), or in the middle of the view.
Visual style lists the four styles with the current one checked; the
Navigation tool lists Orbit, Pan and Zoom, and picking the latched one
releases it, as its navigation-bar button does. The four styles come
from one list shared with the navigation bar's menu.
A sketch that failed (a dimension set negative by a parameter) left every
feature built on it with "unknown sketch 1 (it must come earlier in the
timeline)", which points at the timeline order. The evaluation now notes
the features that failed earlier in the pass, and a feature whose input
sketch is one of them fails with "sketch `Sketch1` failed: <its error>".
That result is never cached, since the cache key holds neither the
sketch's name nor its error: a second failing value or a rename shows
up at once.
A page window (Preferences) filled its frame with
dialog_body.gamma_multiply(0.97), which also scales the alpha, so the
ribbon's labels showed through its title bar, search field and heading.
It now uses the opaque dialog_body, as every other window does; the
navigation bar keeps its own translucent resting fill.
* i18n(uk): add pending translations for missing strings
* i18n(uk): add pending translations for new strings from upstream
* i18n(uk): improve pending translations
* i18n(uk): professional translation of all pending strings
* i18n(uk): finish the pending translations for 29 October
Every value in uk-sync-29oct.json is now Ukrainian except the seven symbols
and formulas that must stay unchanged: the modifier keys, HDR and the three
inertia tensors.
Terminology follows uk.json: spot light is "прожектор", directional light is
"спрямоване", body is "тіло", render is "рендеринг". Camera orientation keeps
тангаж, рискання and крен.
Removes history-origin-bodies.json, which was empty after its content moved
into this file.
- worst_status searched the history and the results for each feature of a folded folder, the square of the history's length every frame
- A folder of 16 features or more now finds places and results in tables built once, first of an id winning as feature_index and Model::result do
- Frame on a 4,880-body design: 20.4 ms -> 7.9 ms (M4 Max, release, headless)
- Test a_folders_mark_is_the_worst_of_its_features_own
Co-authored-by: P'tite Tête <asso@ptitetete.com>
A new user guide page, Equation curves, under Sketching: the first curve step by step, Explicit and
Parametric explained with tables of rules to type (a line, a parabola, a wave, a circle, a spiral),
radians, parameters with the involute of a base circle, building a part (a closed flower curve
extruded), editing, and common mistakes. The technical details stay in a short section for scripts
and agents.
Seven pictures, rendered by `cargo xtask book` from new scripts in docs/book/scripts/equation-*.json
(gitignored output, attributed in attribution/pending/docs-equation-curves.md). The Sketching page
keeps a short summary and links to the new page.
* claim: #9184
* Control channel: a request's own param_check level, applied and confirmed by the app (#9184)
`engine.execute`, `engine.batch` and `engine.script` take an optional
`param_check: "off"|"warn"|"strict"` in their params. The app runs the
request at that level through the same `run_checked` path and batch
preflight a headless session uses, puts its own level back, and every
reply says the level it ran at as `param_check` beside `ok`. A command
that switches designs keeps the app's level; any other word is refused.
Readings and exports answered on a copy off the window thread keep the
level too.
`control.capabilities`, answered at once on the control-server thread,
lists what the channel does beyond the methods every version has:
`{"param_check": ["off", "warn", "strict"]}`. An older app answers
"unknown method".
The MCP bridge asks it once per connection. When the app lists the
level, every call and batch goes with it and the app checks against its
own commands; otherwise the bridge checks before sending, as #9073 does.
At strict, a reply that doesn't say the app checked the call is an error,
and the next calls are checked by the bridge. Also: `add_param_warnings`
takes the reply by `&mut`, and `with_param_check` sits beside
`Remote::new`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Control channel: a design-switching command is checked at the request's level
Review fixes for #9184. `component.edit_in_place`, `component.finish_edit`,
`view.next_tab` and `view.previous_tab` ran at the app's own level and
echoed `off`, so a misspelt call went through at strict. They now have
their parameters checked at the request's level before they run (and
still run at the app's own level, as each design keeps its own), and the
reply echoes the requested level. The MCP bridge at strict now requires
the echo to match its level, not just to be there. `param_check` is read
only by `engine.execute`, `engine.batch` and `engine.script`; other
methods ignore it. The off-thread test now shows the design change
computing off the window thread before it is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>