* Drawing W06a: exact orthographic hidden lines for the analytic subset (#2455) crates/geom/src/hlr (L0): prepare once per body, then hidden_lines for a scene of placed bodies. Edges and face silhouettes are projected from their exact curves, split where projections cross, and each piece is classified by rays toward the viewer against the trimmed faces: visible, hidden or explicitly uncertain, never guessed. Planes, cylinders, cones, spheres and tori are supported whether stored as analytic records, revolutions or spline patches; freeform faces are reported and make what they could hide uncertain. Screen geometry is Seg2 with the W01a accuracy vocabulary: exact lines and conic arcs where the projection is exact, bounded chords otherwise. docs/drawing-hlr.md holds the contract and its limits. * geom/hlr: handle the brep records main gained in #3093 Main's exact model storage (#3093) added Curve::SurfaceIntersection, Surface::PlaneThrough and Surface::PlacedRevolution, and the HLR matches on the records no longer compiled. A plane through three points is a plane: it is trimmed and intersected as one, and a box stored that way draws the same bits as one with axis-stored planes. The procedural intersection curve and the placed revolution (whose affine placement may scale it unevenly) are refused by prepare as not supported yet, until the kernel adapter handles them. The records' positions move with the body's centre like the others. * geom/hlr: pad plane faces' boxes, so a plane record off by rounding still hides Plane faces took the box of their boundary chords unpadded, flat along the normal. When the plane record and its edges disagree by rounding (a unit cube's top plane one ulp above its edges, a 100 mm cube's 1e-11), the ray toward the viewer reached the plane just outside that box, the slab test culled the hit, and the back edges came out Visible with no doubt. Every face's box is now padded by 1e-6 of its size, as curved faces' boxes already were. Reported by DevonHope on #2457. * geom/hlr: limits from review: trim samples, scene extent, crossing pairs, surface groups From DevonHope's review of #2457: - Options::trim_samples must be 1 to MAX_TRIM_SAMPLES (4096). - Placed bodies must stay within MAX_COORDINATE (1e12 mm, as section and brep bound stored numbers). Placements 1e200 apart made the scene's size infinite and every tolerance taken from it with it, so everything came out Visible. - The crossing search counts its candidate pairs before it starts and meets each pair only in the first grid cell the two segments share, instead of keeping a set of the pairs met, which could outgrow wasm's 4 GB before the 500 million pair budget tripped. The same pairs in the same order. - prepare groups faces on one quadric or torus by comparing each face with the faces of its kind whose size agrees to the tolerance (sorted), not with every face; at most 50 million comparisons. prepare_cancellable polls a cancel callback between edges, faces and comparisons. * geom/hlr: boundary chords on a grid, and no fine pass over coincident curved chords The cost items of DevonHope's review of #2457: - Every ray hit asked how far it lies from its face's boundary by scanning all of the face's chords (4096 per circle; a plate's face with 256 holes has about a million). The chords are now bucketed on a uniform grid over the boundary's box, cells at least as long as the longest chord, and the test looks only at the cells around the point. It finds exactly the chords the scan finds. - Chords of two curved curves that lie on each other end to end (aligned holes seen along their axes) were cut into 16 by 16 pieces and intersected, to find crossings that are only noise within the curves' tolerance. They are now skipped; visibility changes where a coincident run starts or ends, and chords that only partly overlap still find those. - Fixtures: a plate with holes, coaxial cylinders seen along their axis, and 300 placements. * geom/hlr: pad boxes by the body's coordinates too; coincident chords only to rounding Review of the previous commits found two holes: - The padding grew with the face's size, but rounding grows with where the body was modelled: a 0.001 mm cube 1e7 mm out, its top plane one step (1.9e-9 mm) above its edges, still had its hit culled. The pad now adds 1e-12 of the body's offset. - Two chords were taken for coincident when their ends lay within each other's sag, which in a coarse scene can hide real crossings: an arc can bulge across a line 1 mm off its chord twice. Only chords that coincide to rounding are skipped now; identical projections, the costly case, still are. * geom/hlr: coincident curves meeting at shared sample points do not cross Timing the review's scenes showed that skipping coincident chords was not enough: chords of two coincident curves also touch end to end at every sample point they share, and each touch was a crossing to refine and split at. 64 coaxial cylinders seen along their axis gave 8.3 million crossings (19 s), 64 cylinders one behind another along the line of sight 4.2 million (214 s; before these commits the crossing budget refused it). A touch at a shared sample point is now dropped when the two curves also coincide, to rounding, on both sides of it. Where a coincident run starts or ends one side differs, and the touch is kept. * geom/hlr: the own-face margin allows for rounding where a body was modelled The far 0.001 mm cube of the previous commit showed a second effect of records rounded at large coordinates: its top plane, one ulp (1.9e-9 mm) above its edges, hid the top edges themselves, because a ray leaving an edge met its own face 3.2e-9 mm along, past the own-face margin of 1e-6 of the face (1.4e-9). The margin now also covers 1e-14 of the body's offset (about 45 ulps of its coordinates), which only matters for parts far smaller than their distance from the origin. * geom/hlr: no parity test for a hit on the boundary, where it is uncertain anyway * docs/drawing-hlr: the fixtures of the review's second round --------- Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
SolidCraft
An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension
and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents
model through the built-in MCP server.
Website ·
Download ·
Try it in the browser ·
Documentation ·
Discord ·
SolidCore
A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 9× playback. Full video, recorded with the demo script.
Download
- Windows: the installer, or
winget install bherbruck.SolidCraft. - macOS: the disk image (Apple silicon and Intel).
- Linux: the AppImage, or
sudo snap install solidcraft(Snap Store). - Web: try it in your browser, no install.
ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.
What works
Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.
- Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
- Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
- Parameters and configurations with unit-aware expressions.
- Assemblies with joints, motion studies, contact sets, interference and mass properties.
- Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
- Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export,
.solidcraftdesigns. - Desktop app, browser app, headless CLI and MCP server, all running the same commands.
The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.
Build from source
cargo run --release -p solidcraft -- --sample # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci # fmt, clippy, tests, icons, assets, layers, wasm
More commands, the Windows cross-build and the browser build are in docs/building.md.
AI agents (MCP)
solidcraft-cli mcp is a Model Context Protocol server. Headless it
runs its own design session, or with --connect it drives the running app so you can watch.
Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. Tools, access rules and an
example session: docs/mcp.md.
Scripts
A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run.
Format and example: docs/scripts.md. Pages can also be driven through the
browser command API.
Contributing
Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.
Sponsors
SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.
Licence
MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.
SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

