Files
solidcraft/tests/kernel-cases/threads/3311-two-tapped-holes-both-modelled-threaded/expected.json
T
Brennen HerbruckandClaude Sonnet 5.5 ead88e582b kernel-cases: threads cases from modelled-thread reports (2 of 2), skipped sources
The rest of the thread cases (holes at the nominal size, shafts and holes
off the thread's size, the crash and sketch-attachment repros) and the
triage of the sources that are not kernel geometry.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00

27 lines
1.3 KiB
JSON

{
"sources": [
"tangency-labs/solidcraft#3311"
],
"what": "a second modelled thread on the same body (the first thread faceted every other hole), over each hole's full length",
"source": "analytic",
"method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Block 40x20x9 with two M5 tapped holes (drill 4.2, rho=2.1), each modelled-threaded over its whole 9 mm (11.25 turns, both ends free): V = 7200 - 2 pi 2.1^2 9 - 2 x 11.25 x V_turn(clipped at 2.1) = 6950.6204 - 22.5 x 1.87431 = 6908.4483 mm3. Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).",
"outcome": "solid",
"body_count": 1,
"volume_mm3": 6908.4483,
"tolerance": {
"rel": 0.01
},
"bbox": {
"min": [
0,
0,
0
],
"max": [
40,
20,
9
]
}
}