Cameron WightandClaude Opus 5.5 e0cb46c1ef Drawing commands on the design's own drawings, each drawing its own undo (#3890)
K4' of the drawing storage plan, on K3b (a drawing lives in its design's file): make, list, open,
close and delete a design's drawings, and read and change the open one's settings and properties.
It replaces #3891's drawing sessions, which held a drawing as a file of its own.

- `drawing.create {name?, language?, units?}` adds a drawing of the design (one ISO A3 landscape
  sheet with the ISO border, the design its one source) and opens it; refused on an empty design.
  `drawing.list`, `drawing.open {drawing}`, `drawing.close`, `drawing.delete {drawing}`.
  `drawing.inspect`, `drawing.set`, `drawing.properties`, `.properties.set`, `.properties.remove`
  work on the open drawing. Labels in en, ja and zh.
- The open drawing is the session's (`Session::open_drawing`, kept in checkpoints), and the part
  gate keeps the parts apart: a command says the part it works on, the model unless it says
  otherwise (`.in_drawing()`, `.any_part()`). While a drawing is open the model's commands wait
  ("a drawing is open: close it to change the model"); the drawing's run only while one is.
  Files, recovery, undo and redo, checkpoints, selection, diagnostics, the command list and
  choosing a drawing work either way. `CommandSpec::allowed` is the one check running a command,
  running it inside another and listing it make.
- `Session::drawing` and `Session::edit_drawing` are the open drawing's one way in: an edit is kept
  when it changed something and still keeps the record's rules, in a new design whose other
  drawings are shared.
- A change that only touches drawings evaluates nothing: `Document::differs_only_in_drawings`
  joins the render-only path, as render settings and part properties do. A model edit shares
  every drawing, so it pays nothing for the check.
- Undo per part: a step records the part it changed (`Snapshot::part`: a drawing, or the model
  and its list of drawings). Undo and redo go through the open part's steps only. A drawing's
  step puts back only that drawing; the model's step puts back the design as it was, keeping each
  drawing it had as it is now. Making and deleting a drawing are the model's steps. A new step
  ends what could be redone in its own part only. `Snapshot::of` is the one place a step is
  taken.
- An agent's message that changed several parts keeps their steps apart, rather than merging them
  into one step that would undo only one part.
- `cmd::metadata`'s rules for reading, setting and removing properties are written once
  (`reading`, `setting`, `removing`) and used by the design's and the drawing's commands.
- `drawing::sort` is the one place the drawings' order (by name, then id) is kept;
  `Document::put_drawing` adds or replaces one in that order.

Tests: making, listing, opening, closing and deleting; what making one refuses, at the cap too; the
gate both ways, inside another command and in the command list; drawing edits as undo steps that
evaluate nothing over 100 rounds; undo and redo per part with model and drawing steps interleaved;
redo ended per part; the order by name, then id, after renames; delete and its undo; refused
changes; checkpoints; save and open in both forms; properties; hostile values for every command
that runs with a drawing open, from the registry; a fuzz of the steps in any order.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 04:30:29 +00:00
2026-10-21 21:13:21 -04:00
2026-10-21 21:13:21 -04:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft 0.8: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 9× playback. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .solidcraft designs.
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
https://solidcraft.io Readme
501 MiB
0 Stars 1 Watchers 0 Forks
Languages
Rust 97%
Python 2%
WGSL 0.5%
JavaScript 0.3%
Shell 0.1%