CamWightandClaude Opus 5.5 de7bf4fc4d Drawing W17a: view definitions as data (#4816) (#4817)
* claim: #4816

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing views as data: named views, scales and the map onto paper (#4816, W17a P1)

What a drawing view is, before anything draws it (geom::drawing_view):
- NamedView: the six principal views and the isometric views from the four upper corners, each
  an exact basis (a Plane whose normal points back at the viewer), never taken from a camera,
  whose pitch clamp would tilt a top view, with no -0 to write out; `iso` reads as the
  front-right one.
- basis_looking: any other view from its direction, an up and an origin (paper x = direction x up,
  paper y = x x direction), refusing a zero direction, an up along it, or an origin that isn't
  finite or within 1e12 mm. W07's
  {direction, up, origin} view reads through it.
- Scale: paper : model as two positive numbers, read and written as "1:2", from 1:100000 to
  1000:1; Scale::fit picks the largest ISO 5455 preset (50:1 to 1:10000) at which a view fits a
  space (W07's "fits the page" default), compared as size x paper <= room x model so an exact
  fit at a reduction isn't lost to rounding.
- ViewFrame: a view's basis, scale and place on paper, the point of its plane at `centre`
  landing at `position_mm`. Its paper map moves the view's curves and their accuracy onto
  paper (paper error = scale x model error); `boundary` maps a box of its plane onto paper from
  its four corners.

In geom, where Seg2 lives:
- Similarity2 and Seg2::similar (new): scale, turn and shift a segment exactly, an arc staying an
  arc. Similarity2::new refuses a scale that isn't above 0 and works the turn out once, not per
  point;
- Seg2::map_controls: a segment's control points mapped by any function. It was doc's
  sheet::map_controls; its four callers in doc use the method now, unchanged.

CurveAccuracy::scaled gives a curve's accuracy at another scale.

Tests: each named view's basis and viewer side, and the same bases from a direction and up; a 50 mm cube in every principal view at 1:1 and
1:2, and in isometric (edges 50 x sqrt(2/3), outline 50 x sqrt(2)); the view's centre on its
position (W07's 100 x 20 front view on A3 at 2:1); scales read, written and refused; the fitted
scale, an exact fit at 1:5 and ISO's smallest; no -0 in any named view's axes; an origin refused by
its own message; hostile bases, centres and positions; every segment kind moved by a similarity,
and the similarities refused; scaled accuracy.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing views: the bottom view pinned, square near parallel, bounded scales and boxes (#4816)

From DevonHope's review of #4817:
- The tests pin all six principal views exactly. The direction-and-up test uses literal ups,
  so a bottom view turned half round now fails it.
- basis_looking squares x to the direction before normalising. Near the 1e-9 threshold the
  normal was up to 8.8e-9 rad off; now it is about 1e-16.
- Scale::fit fits nothing for a size or room that is negative or not finite. A size of 0 still
  sets no limit that way.
- Each side of a scale is 1e-6 to 1e6, so a scale writes at most 49 characters.
- ViewFrame::boundary returns a Result. It refuses a box that is inside out or not finite on
  paper, instead of dropping a corner.
- paper_map, boundary and seg_to_paper say which coordinates they take.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 00:18:01 -04:00
2026-10-21 21:13:21 -04:00
2026-10-21 21:13:21 -04:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft 0.8: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 9× playback. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .solidcraft designs.
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
https://solidcraft.io Readme
501 MiB
0 Stars 1 Watchers 0 Forks
Languages
Rust 97%
Python 2%
WGSL 0.5%
JavaScript 0.3%
Shell 0.1%