Cameron WightandClaude Opus 5.5 dadb5f00ee Paper scene: a sheet PNG at a chosen dpi and colour (#4890 A4)
A new writer, io::paper::paper_png, that reads the shared walk on the
nanometre grid, the one the SVG writer uses, so a PNG draws the same joints,
closures and merges. Neither the walk nor the SVG writer changes.

- Curves are flattened within 1/8 px by geom::paper::flatten, which turns
  each walked piece back into its Seg2 (an arc's centre from its ends, radius
  and direction) and takes Seg2::chords' steps. chords is the bound
  Seg2::polyline already used (the chord's bulge for arcs, Wang's bound for
  the rest), moved out of polyline unchanged so both read one rule.
  polyline itself doesn't fit: it floors an arc's tolerance at a millionth of
  its radius and caps a piece at 4096 steps, coarser than asked without a
  word (0.1 mm, 9 px, on a 100 m arc at 2400 dpi). Over 2^20 points a path,
  or 2^24 a sheet, is refused instead. tiny-skia only gets lines: its own
  flattening stops at 64 lines a curve, more than a pixel off on a large arc
  at a high dpi.
- 25 to 2400 dpi (300 by default). 8-bit greyscale (the default), 1-bit
  black and white (no anti-aliasing, every line at least a pixel wide), 24-bit
  colour, or 32-bit colour with transparent paper.
- The file records its dpi (pHYs) and sRGB, so it prints at the sheet's size.
- Each line is stroked once, then the sheet is drawn in bands of 16 MiB of
  pixels streamed into the file, so memory doesn't grow with the sheet. Each
  band also draws a row above and below that isn't written: tiny-skia starts
  an edge a little differently where a clip cuts it (one subsample, 16
  levels, in a few pixels), so no written row sits on a cut and the bytes are
  the same whatever the band.
- A line under a pixel wide (in greyscale and colour) is drawn as tiny-skia's
  hairline, its coverage scaled by its width: its stroked outline would fall
  between the rows the rasteriser samples and vanish.

Tests: the pixel size and pHYs of A4 at 300 and 25 dpi; a line's and a fill's
pixels at 254 dpi (butt ends, the fill's hole); each colour's PNG type, ink
and paper; a hairline between two rows' centres that is light grey in
greyscale and stays one pixel in black and white, and a bar a fifth of a pixel
wide that black and white inks by its centre; a closed outline joined at its
start; a 40 mm circle round to the pixel at 600 dpi; the same bytes drawn 1, 3
or 7 rows at a time or all at once, and again; the refusals; the flattener's
bounds and counts, and its point cap at the exact boundary; the scene-JSON
fuzz through the PNG writer.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 07:59:10 +00:00
2026-10-21 21:13:21 -04:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft 0.8: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 9× playback. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .solidcraft designs.
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
https://solidcraft.io Readme
501 MiB
0 Stars 1 Watchers 0 Forks
Languages
Rust 97%
Python 2%
WGSL 0.5%
JavaScript 0.3%
Shell 0.1%