* Threads: a 12 mm hole takes M12, and a modelled thread narrows a bore that is too wide (#11609) Automatic sizing of a hole now takes the size whose nominal diameter the hole has (a 12 mm hole is M12, not M14, the size whose tap drill is 12 mm); a hole near no nominal diameter is still matched by tap drill. A modelled internal thread in a hole as wide as the thread or wider no longer refuses with "too wide": the bore is filled in to the thread's minor diameter over the threaded length and the groove cut there, and the feature's warning says so. A size that does not fit the hole names the size that does. A saved thread with no designation keeps the old rule through a pending format step, so an existing design rebuilds with the size it had. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Threads: keep an old automatic size through edits; kernel-rig cases expect the narrowed bore (#11609) Editing a saved automatic thread keeps `old_auto_size`, so it does not change size. The five kernel-rig cases that expected a modelled thread in a hole as wide as the thread to be refused now expect the narrowed bore, with the volume worked out analytically in each case. The thread dialog's reopen pattern names the new field. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Thread dialog test: a 5 mm hole is suggested M5, its nominal size (#11609) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
SolidCraft
An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension
and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents
model through the built-in MCP server.
Website ·
Download ·
Try it in the browser ·
Documentation ·
Discord ·
SolidCore
A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.
Download
- Windows: the installer.
- macOS: the disk image (Apple silicon and Intel).
- Linux: the AppImage, or
sudo snap install solidcraft(Snap Store). - Web: try it in your browser, no install.
ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The macOS app is signed with a Developer ID and notarized by Apple. The Windows downloads aren't signed yet: choose More info, then Run anyway in SmartScreen. On SolidCraft 0.11 to 0.14, download once by hand; see updating.
What works
Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.
- Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
- Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
- Parameters and configurations with unit-aware expressions.
- Assemblies with joints, motion studies, contact sets, interference and mass properties.
- Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
- Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export,
.scdesigns (.solidcraftfiles from earlier releases still open). - Desktop app, browser app, headless CLI and MCP server, all running the same commands.
The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.
Build from source
cargo run --release -p solidcraft -- --sample # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci # fmt, clippy, tests, icons, assets, layers, wasm
More commands, the Windows cross-build and the browser build are in docs/building.md.
AI agents (MCP)
solidcraft-cli mcp is a Model Context Protocol server. Headless it
runs its own design session, or with --connect it drives the running app so you can watch.
Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find
solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default
"C:\\Program Files\\SolidCraft\\solidcraft-cli.exe"). Tools, access rules and an example session:
docs/mcp.md.
Scripts
A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run.
Format and example: docs/scripts.md. Pages can also be driven through the
browser command API.
Contributing
Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.
Sponsors
SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.
Disclaimer
The files in this repository are provided as is, without warranty, liability or indemnity, and Tangency Labs and the contributors accept no responsibility for any harmful or unlawful use of them: read DISCLAIMER.md.
Licence
MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.
SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

