jyvikoandClaude Opus 5.5 a8f393ca36 Kernel tests: the tabbed plate's rim rounds take their exact volume
fillet_tabbed_plate_outer_loop_and_partial_selection_after_hole only
checked that every subset of the R25 tabbed plate's seven top-outline edges
builds and stays inside the plate. It now first holds the hole's rim round
and the three selections that end only at the plate's sharp concave
corners (the R25 arc's two halves, the tab's tangent run of sides, R2
corners and top, and both) to their exact removed volume; the sweep over
all 127 subsets stays as it was.

Proof. The outline's area A(da, dt), the arc moved in by da and the tab's
run by dt, each element parallel to itself, by Green's theorem: an arc
about c of radius rho from a to b gives
1/2 (rho^2 (b - a) + rho (cx (sin b - sin a) - cy (cos b - cos a))), a
segment p -> q gives 1/2 p x q. At a concave corner (+-4, sqrt(609)) where
only one side moves, the elements meet where they cross (the round runs
into the other wall: the section is the union of the two sides' half
regions); where both move the corner is swept, an arc of radius d about the
corner, traversed clockwise from the arc's normal to the side's (the
owner's ruling of 2026-10-30 for rounds meeting at a concave corner beside
an unpicked sharp edge: the profile swept round the corner edge). Checks:
A(0, 0) = 312.5 (pi + 2 theta) + 4 y + 8 (cy - y) + 8 + 2 pi (disc sector,
triangle, tab, R2 corners), and A(0, 0) - A(d, d) = L d - pi d^2 by the
Steiner formula for the swept offset (total smooth turning 2 pi + 2 theta,
the two swept corners -theta each), agreeing to 1e-15 at d = 0.1, 0.3,
0.5; A(0, 0) - A(0, d) agrees with a 0.004 mm grid to 2e-6. The round's
section at height r sin(phi) into it is the outline moved in by
d = r (1 - cos phi), so it removes the integral of
(A(0, 0) - A(d)) r cos(phi) dphi over [0, pi/2] (midpoint rule, 8192
steps, converged to 1e-7 against 4096). The hole's rim round is Pappus:
(1 - pi/4) r^2 about the axis at 1.5 + r (10 - 3 pi) / (3 (4 - pi)).
Graded at 1e-5 of the removal, the bound the D prism's rounds are held to
(the blend surfaces are SMLib's fits).

Today the three selections build with these volumes (aarch64, SMLib); the
sweep still fails where a subset ends a round at a tangent joint (the x = 4
side without its R2 corner): SMLib cannot end a blend inside a tangent
chain, "the blend cannot end there".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 07:12:24 -04:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .solidcraft designs.
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default "C:\Program Files\SolidCraft\solidcraft-cli.exe"). Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
https://solidcraft.io Readme
501 MiB
0 Stars 1 Watchers 0 Forks
Languages
Rust 97%
Python 2%
WGSL 0.5%
JavaScript 0.3%
Shell 0.1%