A round of a bar's top edge, where the bar's side runs tangent into a cylinder standing on its round end, seemed to build: SMLib's result holds the cylinder's wall as a rational spline whose parameter range runs 393° round (u in [-15, 40.18]). Going back into SMLib (to measure the body or change it again) the record's extruded circles become SMLib cylinders with the face's range on them, and that range was 6.866 rad: SMLib refuses a cylinder past one turn (SM_ERR_INVALID_INPUT from BrepFromFlat's face range check). The body could not be measured, a second round on it failed, and the app said one of its freeform faces can't be used. An extruded circle whose range runs more than one turn round now stays the exact spline it is. The bar of the reported design (40 x 16 x 10 with a R8 end, a disc R8 sketched on its top and extruded 10 up, joined): the front top round removes the spandrel up to the cylinder's wall, integral over y in [0, 2] of (2 - sqrt(4 - (2 - y)^2)) (40 - sqrt(64 - (8 - y)^2)) = 32.306475; the three rounds at the other top corner after it remove 53.285832 in all (spandrels outside the corner cube, the cube less the rolling ball's eighth). Both now build and measure to 1e-7; the curvature corner of the three edges at once (setback 3) builds too. Rig cases (fillets) for the three reports: the curvature corner of the three edges, the front top round, and the three corner rounds after it pass; the same corner rounds with the design's ~1e-10 mm sketch residues fail in SMLib (its corner's surface of revolution is close to singular at its boundary) and are listed as known failing. (Their ids take the report- convention in the rig commit later on this branch.) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SolidCraft
An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension
and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents
model through the built-in MCP server.
Website ·
Download ·
Try it in the browser ·
Documentation ·
Discord ·
SolidCore
A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 6× playback with the idle pauses cut. Full video, recorded with the demo script.
Download
- Windows: the installer.
- macOS: the disk image (Apple silicon and Intel).
- Linux: the AppImage, or
sudo snap install solidcraft(Snap Store). - Web: try it in your browser, no install.
ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.
What works
Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.
- Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
- Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
- Parameters and configurations with unit-aware expressions.
- Assemblies with joints, motion studies, contact sets, interference and mass properties.
- Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
- Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export,
.solidcraftdesigns. - Desktop app, browser app, headless CLI and MCP server, all running the same commands.
The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.
Build from source
cargo run --release -p solidcraft -- --sample # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci # fmt, clippy, tests, icons, assets, layers, wasm
More commands, the Windows cross-build and the browser build are in docs/building.md.
AI agents (MCP)
solidcraft-cli mcp is a Model Context Protocol server. Headless it
runs its own design session, or with --connect it drives the running app so you can watch.
Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. If a terminal doesn't find
solidcraft-cli (older Windows installers don't put it on PATH), give its full path (by default
"C:\Program Files\SolidCraft\solidcraft-cli.exe"). Tools, access rules and an example session:
docs/mcp.md.
Scripts
A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run.
Format and example: docs/scripts.md. Pages can also be driven through the
browser command API.
Contributing
Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.
Sponsors
SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.
Licence
MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.
SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

