CamWightandClaude Opus 5.5 8679063629 Drawing revisions: rows added, edited and deleted by command, and listed by drawing.inspect (#3874) (#9150)
* cell: rules both kinds of table share (#3874)

Sheet tables (parts lists first) use the title blocks' cell content, so
the rules both read live in cell.rs:

- Source::Row: the row of a sheet table a cell is on. A title block has
  no rows, so its validation refuses a cell that reads one.
- Warning::Width: a word wider than its value box, shown whole, never
  cut: the width warning that measured text brings.
- is_snake_case moves here from title_block.rs: table columns are named
  by the same rule as cells. check_text is shared the same way.

Tests: a title block cell reading a row is refused, beside other parts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 640cc3e0f5e6b03366b9e231e62cd0b0229f32c6)

* Sheet tables: the parts-list table model and layout (#3874, P7a)

A Table is a sheet table's definition: its columns, the side its heading
is on (top, or at the bottom with the first row just above it, ISO
7573), its row height (7 mm by default), text height, line widths, a
filter and overrides. A column's cells are the title blocks' cell
content read against each row: row fields and text. Rows are input, in
their listed order, with their values worked out and formatted, so a
filter (parts, assemblies, purchased, text per column ignoring case)
hides rows and never changes a count or a quantity.

Table::layout places it with a text measurer, from the right end of the
heading's outer edge:
- a column without a set width is as wide as its widest line, padding and
  line insets added; a set width is kept;
- every cell in a set-width column breaks between words to fit, and its
  row grows to hold its lines, 10/7 cap heights apart (ISO 3098-0); a
  word wider than its column is shown whole with Warning::Width;
- a row field the row doesn't have shows "-"; an override shows its text
  and keeps the value it replaces, an empty one is a blank cell, and one
  for a row that has gone is kept;
- cells sit inside their lines as a title block's do.

Limits, refused and never truncated: 10,000 rows and overrides, 64
columns, 1 MiB of text in all (each cell's text counted before it is
built), 256-byte keys, a measured width that isn't finite and at least
0, a table off the paper's coordinates.

Nothing is saved or drawn yet: the real measurer, DXF and CSV output and
the command come with P7b.

Tests: hand-worked cell corners and text anchors with a fixed-width
measurer, the heading at the top and at the bottom; wrapping and the
row it grows; a word too wide; overrides, blanks, "-"; each filter
leaving every shown value as given; JSON round trip, defaults and
unknown fields; every limit and one past it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 0c5180267d0cd53b06ef13c91d4be43173f2e6d7)

* Revision record and table (#3874, W31, P14a)

A drawing's revisions as data (geom::revision): one RevisionRecord for
the whole drawing, or per sheet with each sheet numbered apart.

- A row holds what people type: revision, description, designer,
  checker and date. Adding a row fills in only the next revision;
  nothing fills in a date, a checker or an approval.
- Numbers run from 1, or 0; letters run A to Y without I, O, Q, S, X
  and Z, then AA, AB. The next revision follows the highest in its scope
  among the rows and the issued history, so an issued revision is never
  given out again. A typed revision is kept as typed; in letters one
  with a skipped letter is accepted with a SkippedLetter warning.
- Rows are added, hidden and deleted; issue() appends a copy of a row to
  the issued history, which nothing removes or changes (private, read
  through issued()). Row and tag ids come from the caller (the
  design's random ids), never from a counter, so two people adding rows
  never take the same id; an id in use is refused.
- Triangular tags bind to a row id and show its revision or their own
  text; deleting a row reports its tags, which keep the revision they
  showed, marked lost.
- The revision table is the sheet table (table()): Revision,
  Description, Designer, Checker, Date, heading at the top; hidden rows
  are left out. The table's rows and a title block's revision fields
  (newest(), hidden rows included) read RevisionRow::field, one path.

This is the drawing's revision only: the model's revision and the
export time are kept apart. Release, approval and frozen snapshots
(G16/G22) are not in this slice. Nothing is placed or saved on a sheet
yet (W12, W15).

Tests: numbering both ways with the skips and past Y and YY, typed
revisions and the warning, the next after issued and deleted rows, per
sheet; add fills in nothing else; history kept through hide and
delete; tags reported and lost; the title block's fields and the table
rows from one function, laid out by the sheet table; JSON round trip,
unknown fields and damaged records refused; the caps; an id in use refused.

- An issued copy keeps the model version it was issued against
  (model_version, given to issue(); none until version control gives
  versions, #2869), so the release step has its field here. It is read
  by the label rule, like the revision.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit fa7849ada783c91f2ca52fb4a11687cf1a71de77)

* Drawing revisions: rows added, edited, deleted and listed by command (#3874, W31)

A drawing saves one revision record for all its sheets (Drawing::revisions, behind an Arc as the
sheets are, so an undo step shares it; validated with the drawing; its ids among the drawing's ids
in use), in the order its rows were added, the newest last. Pending drawing format: revisions.

- drawing.revision.add {set?}: a row with the next revision, after the highest the drawing has
  given, and any texts given: one undo step.
- drawing.revision.edit {row, set: {revision?, description?, designer?, checker?, date?,
  hidden?}}: the texts as typed (a revision is one line) and what changed; a revision in letters
  with a letter the lettering skips is kept and warned about.
- drawing.revision.delete {row}: the row, and the tags it leaves showing the revision they had.
- drawing.revision.list: every row, the oldest first, and the revision a new row gets.

An id's text form (13 characters of lowercase Crockford base32) moves down to solidcraft_geom::ids,
with an option helper, so the revision record (geom) writes its row and tag ids as every drawing id
is written; solidcraft_doc::ids gives them on, beside IdSource.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing revisions: listed by drawing.inspect, a table row keyed by its id's text, and a record per sheet tested (#3874, W31)

The rows show in drawing.inspect beside the sheets, as `revisions: {rows, next}`, from the same
function the revision commands answer with; drawing.revision.list goes, so a drawing's rows have one
place to be read. A revision table's row is keyed by its id as a file writes it, the one spelling
every drawing id has (a table's cell overrides name a row by its key). A record kept per sheet whose
rows keep its own rules is refused by the drawing, so that rule has a test of its own.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 00:22:51 -04:00
2026-10-21 21:13:21 -04:00
2026-10-21 21:13:21 -04:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft 0.8: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 9× playback. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .solidcraft designs.
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
https://solidcraft.io Readme
501 MiB
0 Stars 1 Watchers 0 Forks
Languages
Rust 97%
Python 2%
WGSL 0.5%
JavaScript 0.3%
Shell 0.1%