NOWN-DEVandClaude Opus 5.5 63cb48a4ee Measure: a body whose meshes leave a gap keeps its volume wherever it is (#2069)
* Measure: a body whose meshes leave a gap keeps its volume wherever it is

A part ring cut by solid.combine (two prisms through its ends, a notch
through its chamfer) measured 992.03 mm3 at the origin, 999.17 moved
100 mm and 1063.48 moved 1000 mm; it encloses 993.92. The reference
mesher leaves a crack where the notch meets the chamfer's cone: the
volume beside it is left out, and the divergence-theorem sums, taken
about the world origin, close the crack by a cone to the origin, so the
error grows with the body's distance from it.

A closed surface's area vectors sum to zero. When the picked meshes'
sum could move the volume by more than 1e-5 within the body's size, and
the display plan (which shares every edge's nodes between its faces) is
closed, the body is measured on the plan, about its box centre. Every
other body measures exactly as before.

Tests: the cut ring at the origin and moved by up to 10000 mm, against a
grid quadrature of the cut; a revolved ring of cones and cylinders moved
100/1000/10000 mm along each axis (1e-6); a cylinder and a frustum far
from the origin against hand values. Robustness seed 64 moves by 1.4e-6
and is recorded.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Measure: a gap the display plan can't close is measured about the box's centre

When the meshes leave a gap and the display plan isn't closed either, the
sums used to fall back to the origin-based volume, which drifts with the
body's distance from the origin (7 % at 1000 mm for the part ring). The
per-face sums are now taken about the fine mesh's box centre, which closes
the gap by a cone to a point inside the body; over a closed mesh nothing
changes. The gap decision moves into gap_closed, and a unit test with a
cube left open by hand covers closed vs open meshes, the closed plan, and
the fallback with an open plan or none.

Seeds 14, 20, 40, 55 and 61 end with such a body and are recorded with
ROBUSTNESS_GOLDENS_BLESS (volumes move by -0.51 %, +0.16 %, +1.9e-4,
+9.0e-5 and -1.5e-5; steps, outcomes and counts unchanged).

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Record robustness seed 86 after measuring bodies whose meshes leave a gap

Seed 86 was added on main by #2387 after this branch's goldens were recorded. Its last
body leaves a gap in its meshes, so the measure change here moves its volume by -0.27 %
and its area by +0.13 %; steps, outcome and counts are unchanged. Seed 86 passes
unchanged on main 57d21013. Every other seed matches on the merged branch.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* measure: take the display plan only where it agrees with the sums to within what the gap could move

A closed display plan meshed less finely than the sums differs from them by its own chord error,
which can be larger than anything the gap explains: an imported part with small blends measured
0.03 % low on its plan. The plan is now taken only where the two differ by at most what the
gap's area could move the volume within the body's size; otherwise the sums about the box's
centre stand.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* measure: sum a mesh left open about its box's centre only, without the display plan

The closed display plan meshes some faces of an imported B-spline part
more coarsely than the sums do, so a body and its boolean pieces no
longer add up: clearance's union cross-check then refused a 17.3 mm3
overlap between two such parts (the pieces implied 20.5). Summing about
the box's centre alone keeps the gap closed by a cone to a point inside
the body and stays consistent with the pieces. Seeds 64 and 86 are
re-recorded with the reason.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* measure: placement tests in the area's test files

The ring and frustum tests join measure.rs's tests, and the cut ring
joins measure_centre_tests.rs (AGENTS.md: a regression test goes into
the existing test file for its area). The goldens note for seeds 14, 20,
40, 55 and 61 describes the centre-only sums.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* measure: keep the origin for a body left open on purpose

A surface, or a cup whose lid is still a separate sheet, has no volume of
its own. Measured about its box's centre, two such bodies stopped
comparing once the centre moved (a crowned lid rises), which broke the
patch crown test. Only a mesh with a small crack is measured about the
centre now.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF

* Robustness goldens: keep main's notes, one note for this change's seeds

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-21 00:57:03 +00:00
2026-10-20 22:08:36 -04:00
2026-10-20 22:08:36 -04:00
2026-10-11 16:07:46 +08:00

SolidCraft

SolidCraft

An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents model through the built-in MCP server.

Download for Windows Download for macOS Download for Linux Get it from the Snap Store Try it in your browser

Website · Download · Try it in the browser · Documentation · CI powered by Blacksmith Discord · SolidCore

CI Latest release Downloads Licence Discord Listed on Remade Stars

tangency-labs%2Fsolidcraft | Trendshift tangency-labs%2Fsolidcraft | Trendshift (Rust)

SolidCraft 0.8: model a Raspberry Pi 4 case from an empty design: a sketch dimensioned with parameters, extrude, fillets and shell, a rim rounded in one pick, standoffs patterned on the board's mounting holes, port cut-outs, vent slots, "Pi 4" engraved in a font, a PETG material with its mass in Properties, and a height change in Parameters

A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 9× playback. Full video, recorded with the demo script.

Download

ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.

What works

Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.

  • Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
  • Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
  • Parameters and configurations with unit-aware expressions.
  • Assemblies with joints, motion studies, contact sets, interference and mass properties.
  • Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
  • Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export, .solidcraft designs.
  • Desktop app, browser app, headless CLI and MCP server, all running the same commands.

The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.

Build from source

cargo run --release -p solidcraft -- --sample      # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands  # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci                                     # fmt, clippy, tests, icons, assets, layers, wasm

More commands, the Windows cross-build and the browser build are in docs/building.md.

AI agents (MCP)

solidcraft-cli mcp is a Model Context Protocol server. Headless it runs its own design session, or with --connect it drives the running app so you can watch. Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. Tools, access rules and an example session: docs/mcp.md.

Scripts

A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run. Format and example: docs/scripts.md. Pages can also be driven through the browser command API.

Contributing

Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.

Sponsors

CI powered by Blacksmith

SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.

Licence

MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.

SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

S
Description
SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
https://solidcraft.io Readme
501 MiB
0 Stars 1 Watchers 0 Forks
Languages
Rust 97%
Python 2%
WGSL 0.5%
JavaScript 0.3%
Shell 0.1%