Files
solidcraft/crates
62b49f9f89 Boolean: a pin in a bore of its size is clear at every placement (#2714) (#2715)
* Boolean: a pin in a bore of its own size is clear of it, whatever its facets

A pin whose wall is in other faces than the bore's (turned from a profile: three
faces; the bore two) is faceted at other angles. Where one body's faces end on
the shared cylinder (the pin's wall through the end face of the tube, the pin's
end inside the bore) the facets cross by the facetings' error, so the sampled
shortcut doubted its own "apart" answer, every retry failed on the coincident
walls, and the result came back unverified after seconds: inspect.clearance
left such pairs unchecked ("could not be intersected there").

The shortcut now leaves out crossings that lie on a cylinder both bodies have
faces on (axes and radii within the kernel's same-surface tolerance, where both
faces run). A pin a hair off its hole's axis, or one pushed into a narrower
bore, is still not taken for apart.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Boolean: skip only the shared cylinder's own crossings, not a flat along it

The shortcut left out every crossing near a cylinder both bodies have faces
on, from any face: a pin through a D-bore whose flat is 0.022 mm inside it
came back as contact. Mesh::crosses_except now hands the predicate the two
triangles' faces, and only crossings between the faces on the shared
cylinder, or between one of them and an end face across its axis that keeps
to its body's side of the cylinder (within the facetings' error), are left
out. The D-bore's end face reaches into the cylinder to the flat, so the
pin's wall through it counts again; a flat, key or rib along the axis always
counts.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Boolean: a pin in a bore of its size is clear at every placement

The sampled shortcut's check that no facet has material under it on the
wrong side of the other body still caught the facetings of a shared
cylinder. A facet of a pin's end inside the bore (or of the bore part's
end face round the pin) with all three corners on the rim has its middle
just inside the cylinder. Where the other body's chords reach further in
at that angle, the point under it lies inside the other mesh, though the
bodies only touch. Which facets do so depends on the face splits and the
placement, so the same pair read as clear at one placement and as "not
verified" at another.

Such points are no evidence now when they lie on the shared cylinder,
under a facet of one of its end faces: the end faces and band the
crossing check already leaves out. A pin 0.02 mm larger is no shared
cylinder, and its overlap is still found.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 23:56:40 +00:00
..