* Bill of materials types: phantom, reference, purchased and inseparable (#3874) A component's bill of materials type is a part property (`bom_type` in its metadata, set with component.metadata.set and read by component.metadata, as part_number is), so older releases keep it and no format change is needed. It isn't a design property: the Design Properties dialog doesn't list it and document.metadata.set refuses it. A word this build doesn't know reads as normal and is kept. assembly.bom counts by type: a phantom has no row and what it holds counts where it is placed, in the same rows as the same parts there; a reference counts nowhere, and nothing inside it does; purchased and inseparable components are one row, and in parts only an inseparable component's purchased parts are listed too. Rows of one part number but different types are different rows. Rows and children carry bom_type. With no types set the rows are as before. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Glossary: bill of materials and bill of materials type (#3874) The bill of materials types are a new idea, so the glossary gets their term, with the five types, and "normal" gets its fourth meaning in the table of words with more than one meaning. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Bill of materials types: a plain line for each (#3874) The guide's table and the glossary entry say what each type is for in plain words: something you make, something just to group, something to use as a reference, something you buy, something made as one piece. The names stay the five standard ones. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Bill of materials: kits fold together only when their contents' types match (#3874) With group_children, two kits with one part number share a row when what they hold reads the same. That reading (kit_key) compared each child by part number and count, but not by its bill of materials type, though rows themselves are told apart by type. So a kit holding a made bolt and a kit holding a bought one, both KIT, folded into one KIT x2 row listing the first kit's bolt twice: the other type was lost, and which one depended on creation order. 0xlillith found it in review of #5107. kit_key now includes each child's type. Equal part number, type and contents still fold. Test: two KIT kits each holding a BOLT fold into one row of two; once one bolt is purchased they are two rows, each listing its own bolt. Planted fault (the type left out of the key): caught. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
SolidCraft
An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension
and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents
model through the built-in MCP server.
Website ·
Download ·
Try it in the browser ·
Documentation ·
Discord ·
SolidCore
A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 9× playback. Full video, recorded with the demo script.
Download
- Windows: the installer, or
winget install bherbruck.SolidCraft. - macOS: the disk image (Apple silicon and Intel).
- Linux: the AppImage, or
sudo snap install solidcraft(Snap Store). - Web: try it in your browser, no install.
ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.
What works
Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.
- Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
- Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
- Parameters and configurations with unit-aware expressions.
- Assemblies with joints, motion studies, contact sets, interference and mass properties.
- Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
- Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export,
.solidcraftdesigns. - Desktop app, browser app, headless CLI and MCP server, all running the same commands.
The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.
Build from source
cargo run --release -p solidcraft -- --sample # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci # fmt, clippy, tests, icons, assets, layers, wasm
More commands, the Windows cross-build and the browser build are in docs/building.md.
AI agents (MCP)
solidcraft-cli mcp is a Model Context Protocol server. Headless it
runs its own design session, or with --connect it drives the running app so you can watch.
Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. Tools, access rules and an
example session: docs/mcp.md.
Scripts
A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run.
Format and example: docs/scripts.md. Pages can also be driven through the
browser command API.
Contributing
Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.
Sponsors
SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.
Licence
MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.
SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

