* Title blocks: what a cell shows and where its text goes (#3875) geom::cell holds a title-block cell's content: parts of text and fields (component, drawing, sheet, revision or prompt, by key, with an optional unit and decimals kept as written for the resolver to check), at most 64 parts and 4096 bytes of text, with no control character but a line break. Beside it are a resolved value (live, overridden and drifted, or missing, with "-" for each part that couldn't be read and why), an override with the value it replaced, and the projection a drawing's views use (first or third angle), which the title block's symbol will read. A fit warns and never cuts: a count of characters, not bytes, with its own count for text in Chinese, Japanese, Korean or Yi characters. The cell text rule places a label and a value: the label's baseline 1 mm plus its cap height below the cell's top, the value box under it inset by 1 mm, one line centred in the box, and wrapped or several lines down from its top at the font's pitch, with a warning when the last falls below the box. Wrapping by width, width warnings and glyphs a font lacks need the text measured, so they wait for the paper scene's text. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Title blocks: definitions and their place on a sheet (#3875) geom::title_block holds a title block's definition: its size (1 to 1000 mm a side), its outline and cell line widths, and up to 64 cells. Each cell has a snake-case name of its own, a rectangle measured from the block's lower-right corner, an optional one-line label with its cap height, and a value: text from cell content, with its cap height, alignment and fit, or the projection symbol, which reads the drawing's projection and is never fixed in the block. validate() checks a definition on its own, as when one is read: cells inside the block and not overlapping (touching is fine), label and value cap heights that fit, and the content's own limits. layout() puts the block on the drawing border's lower-right corner of a sheet, refusing one that doesn't fit, and gives each cell's rectangle, its label's place and its value box by the cell text rule. On A3 landscape a 180 x 54 mm block runs from (230, 10) to (410, 64); it fits A5 landscape and every larger sheet, but not A5 upright. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Cell text: a value box lies within the paper's coordinates (#3875) place_lines took any finite, ordered value box, but centring one far out (min x 1e308, max x 1.1e308) overflows: the anchor came back infinite, with no warning. 0xlillith found it in review of #3877. The paper scene already bounds every coordinate it holds by MAX_COORDINATE_MM (twenty times the longest sheet side). That limit is now public, and place_lines keeps its box inside it, so its anchor is always finite: one rule for what a paper coordinate may be. Tests: the hostile-box test refuses both overflow cases from the review and a box just past the limit on each side, and places lines in a box the size of the whole paper limit. The fuzz test's numbers now include values past the limit (1.1e5, ±1e308). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Title blocks: padding from the lines' inner edges, one label rule, nothing unread (#3875) A cell's text is padded from the inner edge of its lines: each side of a cell moves in by half the line drawn on it (the outline's on the block's edges, a cell line's inside), so a wide outline never covers the text. Before, the padding ran from the line's centre. The label's one-line rule lives with the cell text rules (`cell::check_label`), where parts lists will find it. The cell types nothing read yet (`Override`, `Resolved`, `State`, `Problem`, `Reason` and `MISSING`) wait for the resolver that will read them. The tests check the exact thresholds inside the lines (a label that leaves no room, a value that just fits), pick each of the lines, alignment and wrapping on their own so every combination comes up, and lay fuzzed blocks out on every standard sheet, either way, with and without the filing margin. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Title blocks: the drawing border's line, descenders, room where the block sits (#3875) From DevonHope's review of #3877: - Each cell's lines are clamped to the inner edge of the drawing border's line. That line runs along the block's right and bottom edges, and along any other edge it reaches, as when the block fills the border. Aabb2::intersection, the 2D twin of Aabb3's, does the clamping. - layout checks each cell's room again where the block sits (place_cells, which validate runs at the origin), so rounding at the real corner can't turn a cell inside out. - The cell text rule counts descenders, at 3/10 of the cap height (ISO 3098's lettering B). They may reach into the padding under a value box, never past it to a line. place_lines warns Height when they would, and validate asks it whether one line fits. - The module doc no longer links to a private function. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
SolidCraft
An open-source parametric 3D CAD application built in pure Rust.
Sketch, constrain, and build solids with a parametric feature timeline. Change a dimension
and watch your model rebuild. Run it on your desktop, in your browser, or let AI agents
model through the built-in MCP server.
Website ·
Download ·
Try it in the browser ·
Documentation ·
Discord ·
SolidCore
A Raspberry Pi 4 case from an empty design: a sketch dimensioned with the board's parameters, extrude, fillet, shell, the rim rounded in one pick, an M2.5 standoff patterned on the 58 × 49 mm hole rectangle, port cut-outs, vent slots, "Pi 4" engraved in DejaVu Sans Bold and a PETG material defined in the design, with its mass in Properties, then height 24 → 32 mm in Parameters and it all rebuilds. 9× playback. Full video, recorded with the demo script.
Download
- Windows: the installer, or
winget install bherbruck.SolidCraft. - macOS: the disk image (Apple silicon and Intel).
- Linux: the AppImage, or
sudo snap install solidcraft(Snap Store). - Web: try it in your browser, no install.
ARM64 and 32-bit builds, portable zip, .deb, .rpm, Flatpak and the other packages are on the downloads page. The downloads aren't signed yet: on Windows choose More info, then Run anyway in SmartScreen; on macOS right-click SolidCraft and choose Open the first time. On SolidCraft 0.11 to 0.14, download once by hand; see updating.
What works
Early but usable for simple parts: 75 of 76 public reference parts match their analytic or FreeCAD-computed volume, area, centre of mass and bounding box (oracle); the other is a tracked bug.
- Sketches and constraints: lines, arcs, splines, text and more, solved by our own constraint solver, with parameter-driven dimensions.
- Features: extrude, revolve, sweep, loft, fillet, chamfer, shell, draft, holes, threads, patterns, mirror, split and combine on an editable parametric timeline.
- Parameters and configurations with unit-aware expressions.
- Assemblies with joints, motion studies, contact sets, interference and mass properties.
- Sheet metal with flanges, hems, fold/unfold and flat patterns, and plastic enclosure features.
- Files: STEP, IGES, 3MF, STL, OBJ and glTF in and out where supported, URDF export,
.solidcraftdesigns. - Desktop app, browser app, headless CLI and MCP server, all running the same commands.
The full list is in docs/capabilities.md and docs/features.md; status and plans are in ROADMAP.md. See also what people built, 3D mouse support and the architecture.
Build from source
cargo run --release -p solidcraft -- --sample # desktop app with a sample part
cargo run --release -p solidcraft-cli -- commands # the command registry
cargo run --release -p solidcraft-cli -- run examples/bracket.json --out bracket.step
cargo xtask ci # fmt, clippy, tests, icons, assets, layers, wasm
More commands, the Windows cross-build and the browser build are in docs/building.md.
AI agents (MCP)
solidcraft-cli mcp is a Model Context Protocol server. Headless it
runs its own design session, or with --connect it drives the running app so you can watch.
Claude Code: claude mcp add solidcraft -- solidcraft-cli mcp. Tools, access rules and an
example session: docs/mcp.md.
Scripts
A script is a JSON list of the same commands the UI runs, executed with solidcraft-cli run.
Format and example: docs/scripts.md. Pages can also be driven through the
browser command API.
Contributing
Help is welcome. CONTRIBUTING.md covers how to build and test, the code map, the clean-room and licence rules, and where help is wanted most. Open work is in GitHub issues; chat is on Discord.
Sponsors
SolidCraft's continuous integration runs on Blacksmith, which sponsors its CI minutes.
Licence
MIT OR Apache-2.0, at your option. Developed under the clean-room contribution rules; third-party code and assets retain their documented licences and attribution.
SolidCraft is independent. Behaviour is designed from public documentation, general CAD conventions and user feedback. Reference tests use analytic values and open-source tools. SolidCraft is not affiliated with, sponsored by or endorsed by Autodesk, Dassault Systèmes, PTC, Siemens or any other CAD vendor. Fusion, AutoCAD, Inventor, SolidWorks, Onshape, Creo, Blender and Tinkercad are trademarks of their respective owners, named only to describe compatibility (see NOTICE).

