Files
solidcraft/docs/features.md
T
47a1459060 Sync current main into render, preserving release and viewport changes (#5705)
* Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci]

* Viewport: whole-body highlights reuse the model's own triangles (#4554) (#5109)

Hovering or selecting whole bodies -- a browser row, a History group, a body
under the pointer in body-pick mode -- built a CPU copy of every body's
triangles into the highlight scene. On a 40-body 4.3 MB STEP assembly that was
147 bodies, 70 MB of triangle copies and a 519 ms frame.

The model already has the same geometry on the GPU. The highlight now names it
and the renderer draws it again in the highlight colour:

- bodies drawn from a display plan: the model's evaluated plan chunks, with a
  hover/selection tint uniform (the chunks stay resident in the model scene);
- bodies drawn as placements of shared triangles: the same placements of the
  model's shared triangles, coloured per instance;
- bodies the model builds on the CPU: their vertex range in the model scene's
  block.

See-through and faded bodies keep the CPU feedback, which colours them; faces
and edges highlighted on their own are unchanged. The highlight looks the same
(verified side by side).

On the assembly the highlight build drops from 519 ms to 9 ms and no longer
copies any triangles; selecting the whole assembly takes 9-20 ms.

Co-authored-by: Claude Code <noreply@anthropic.com>

* Offer to stand up SolidWorks files instead of turning them silently; add Turn Up Axis to the component menu (#5655)

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch on a picked origin plane uses the plane shown after standing an import up (#5659)

* Sketch on a picked origin plane uses the plane shown, also in a moved component

After a STEP file opens its component stays the active one, and standing it up
turns that component a quarter about X. Starting a sketch on XY picked in the
viewport then sent `{"plane": "XY"}`, which names the active component's own
XY: upright after the stand-up. The sketch landed on the world XZ, Look At
turned to face Y and the extrude went along Y.

The viewport and browser only show the design's origin planes, so a picked
origin plane now goes to sketch.create written out as that world plane while
the active component is moved; sketch.create maps it into the component's
frame once. The flip toward the viewer uses the same plane.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Stand-up axes tests: stand the file up through the offer when one is waiting

#5655 offers to stand up SolidWorks files instead of turning them silently.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* gpu tests: give the two test frames the new hover and selection tints (#5698)

#5109 added Frame::hover_tint and selection_tint; two test frames that landed alongside it didn't set them, so solidcraft-gpu's tests stopped compiling on main.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

* Release 0.21.0-rc.2 (#5691)

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: Jackson Oursland <jacob.oursland@gmail.com>
Co-authored-by: Claude Code <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-23 17:29:50 -04:00

605 lines
25 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Features
SolidCraft's commands by area, generated by `cargo xtask features` from the command registry (`solidcraft-cli commands`). Planned commands are marked in their rows. Every command runs the same way from the toolbar, a script, `solidcraft-cli exec <id> '<json>'`, the control channel and MCP; parameters are in the [command reference](book/src/reference/commands.md) (`cargo xtask book`). Status and plans: [ROADMAP](../ROADMAP.md).
## Sketch
| Command | Id | Toolbar |
|---|---|---|
| Center Point Arc | `sketch.arc.center_point` | SKETCH › CREATE |
| Tangent Arc | `sketch.arc.tangent` | SKETCH › CREATE |
| 3-Point Arc | `sketch.arc.three_point` | SKETCH › CREATE |
| AutoConstrain | `sketch.auto_constrain` | SKETCH › CONSTRAINTS |
| AutoConstrain from datum | `sketch.auto_constrain_from_datum` | SKETCH › CONSTRAINTS |
| Auto-Project Edges on Reference | `sketch.auto_project` | – |
| Blend Curve | `sketch.blend_curve` | SKETCH › MODIFY |
| Break | `sketch.break` | SKETCH › MODIFY |
| Break Link | `sketch.break_link` | – |
| Centerline | `sketch.centerline` | SKETCH › CREATE |
| Chain | `sketch.chain` | – |
| Distance and Angle Chamfer | `sketch.chamfer.distance_angle` | SKETCH › MODIFY |
| Equal Distance Chamfer | `sketch.chamfer.equal_distance` | SKETCH › MODIFY |
| Two Distance Chamfer | `sketch.chamfer.two_distance` | SKETCH › MODIFY |
| Center Diameter Circle (C) | `sketch.circle.center` | SKETCH › CREATE |
| 3-Point Circle | `sketch.circle.three_point` | SKETCH › CREATE |
| 3-Tangent Circle | `sketch.circle.three_tangent` | SKETCH › CREATE |
| 2-Point Circle | `sketch.circle.two_point` | SKETCH › CREATE |
| 2-Tangent Circle | `sketch.circle.two_tangent` | SKETCH › CREATE |
| Conic Curve | `sketch.conic` | SKETCH › CREATE |
| Sketch Constrainer | `sketch.constrainer` | SKETCH › CREATE |
| Coincident | `sketch.constraint.coincident` | SKETCH › CONSTRAINTS |
| Collinear | `sketch.constraint.collinear` | SKETCH › CONSTRAINTS |
| Concentric | `sketch.constraint.concentric` | SKETCH › CONSTRAINTS |
| Curvature | `sketch.constraint.curvature` | SKETCH › CONSTRAINTS |
| Equal | `sketch.constraint.equal` | SKETCH › CONSTRAINTS |
| Fix/UnFix | `sketch.constraint.fix` | SKETCH › CONSTRAINTS |
| Horizontal/Vertical | `sketch.constraint.horizontal_vertical` | SKETCH › CONSTRAINTS |
| MidPoint | `sketch.constraint.midpoint` | SKETCH › CONSTRAINTS |
| Parallel | `sketch.constraint.parallel` | SKETCH › CONSTRAINTS |
| Perpendicular | `sketch.constraint.perpendicular` | SKETCH › CONSTRAINTS |
| Polygon | `sketch.constraint.polygon` | SKETCH › CONSTRAINTS |
| Symmetry | `sketch.constraint.symmetry` | SKETCH › CONSTRAINTS |
| Tangent | `sketch.constraint.tangent` | SKETCH › CONSTRAINTS |
| Normal/Construction (X) | `sketch.construction` | SKETCH › CREATE |
| Copy Sketch Entities | `sketch.copy` | – |
| Create Sketch | `sketch.create` | SOLID › CREATE |
| Cut Sketch Entities | `sketch.cut` | – |
| Delete Sketch Entities | `sketch.delete` | – |
| Sketch Dimension (D) | `sketch.dimension` | SKETCH › CREATE |
| Move Dimension Text | `sketch.dimension_text` | – |
| Drag Sketch Geometry | `sketch.drag` | – |
| End Sketch Drag | `sketch.drag_end` | – |
| Draw Dimensioned Sketch Geometry | `sketch.draw.dimensioned` | – |
| Edit Sketch | `sketch.edit` | – |
| Edit Text | `sketch.edit_text` | – |
| Ellipse | `sketch.ellipse` | SKETCH › CREATE |
| Save As DXF | `sketch.export_dxf` | – |
| Extend | `sketch.extend` | SKETCH › MODIFY |
| Fillet | `sketch.fillet` | SKETCH › MODIFY |
| Finish Sketch | `sketch.finish` | SKETCH › FINISH SKETCH |
| Finish with AutoConstrain | `sketch.finish_auto_constrain` | SKETCH › FINISH SKETCH |
| Fit Curves to Mesh Section | `sketch.fit_curves_to_section` | SKETCH › CREATE |
| Constraint Glyphs | `sketch.glyphs` | – |
| Include 3D Geometry | `sketch.include_3d` | SKETCH › CREATE |
| Infinite Line | `sketch.infinite` | – |
| Insert DXF | `sketch.insert_dxf` | SKETCH › INSERT |
| Insert SVG | `sketch.insert_svg` | SKETCH › INSERT |
| Inspect Sketch | `sketch.inspect` | – |
| Intersect | `sketch.intersect` | SKETCH › CREATE |
| Intersection Curve | `sketch.intersection_curve` | SKETCH › CREATE |
| Isoparametric Curve | `sketch.isoparametric_curve` | SKETCH › CREATE |
| Line (L) | `sketch.line` | SKETCH › CREATE |
| Midpoint Line | `sketch.line.midpoint` | SKETCH › CREATE |
| 3D Line | `sketch.line3d` | – |
| Loose Ends | `sketch.loose_ends` | – |
| Tie Loose Ends | `sketch.loose_ends.tie` | – |
| Mirror | `sketch.mirror` | SKETCH › PATTERN |
| Move/Copy Sketch Entities | `sketch.move` | SKETCH › MODIFY |
| Move 3D Point | `sketch.move3d` | – |
| Drag Sketch Point | `sketch.move_point` | – |
| Offset (O) | `sketch.offset` | SKETCH › MODIFY |
| Break Offset Association | `sketch.offset.break` | – |
| Sketch Palette Options | `sketch.options` | – |
| Paste Sketch Entities | `sketch.paste` | – |
| Circular Pattern | `sketch.pattern.circular` | SKETCH › PATTERN |
| Rectangular Pattern | `sketch.pattern.rectangular` | SKETCH › PATTERN |
| Point | `sketch.point` | SKETCH › CREATE |
| 3D Point | `sketch.point3d` | – |
| Circumscribed Polygon | `sketch.polygon.circumscribed` | SKETCH › CREATE |
| Edge Polygon | `sketch.polygon.edge` | SKETCH › CREATE |
| Inscribed Polygon | `sketch.polygon.inscribed` | SKETCH › CREATE |
| Project (P) | `sketch.project` | SKETCH › CREATE |
| Project To Surface | `sketch.project_to_surface` | SKETCH › CREATE |
| Center Rectangle | `sketch.rectangle.center` | SKETCH › CREATE |
| Rounded Rectangle | `sketch.rectangle.rounded` | SKETCH › CREATE |
| 3-Point Rectangle | `sketch.rectangle.three_point` | SKETCH › CREATE |
| 2-Point Rectangle (R) | `sketch.rectangle.two_point` | SKETCH › CREATE |
| Redefine Sketch Plane | `sketch.redefine` | – |
| Sketch Scale | `sketch.scale` | SKETCH › MODIFY |
| Center Point Arc Slot | `sketch.slot.arc_center` | SKETCH › CREATE |
| Three Point Arc Slot | `sketch.slot.arc_three_point` | SKETCH › CREATE |
| Center Point Slot | `sketch.slot.center_point` | SKETCH › CREATE |
| Center to Center Slot | `sketch.slot.center_to_center` | SKETCH › CREATE |
| Overall Slot | `sketch.slot.overall` | SKETCH › CREATE |
| Snap Inference | `sketch.snap` | – |
| Solve Sketch | `sketch.solve` | – |
| Control Point Spline | `sketch.spline.control_point` | SKETCH › CREATE |
| Control Point Spline (Degree 5) | `sketch.spline.control_point_5` | SKETCH › CREATE |
| Fit Point Spline | `sketch.spline.fit_point` | SKETCH › CREATE |
| 3D Spline | `sketch.spline3d` | – |
| Spun Profile | `sketch.spun_profile` | SKETCH › CREATE |
| Text | `sketch.text` | SKETCH › CREATE |
| Toggle Driven Dimension | `sketch.toggle_driven` | – |
| Trim (T) | `sketch.trim` | SKETCH › MODIFY |
| Trim Along Path | `sketch.trim.path` | – |
## Solid modelling
| Command | Id | Toolbar |
|---|---|---|
| Align | `solid.align` | SOLID › MODIFY |
| Boundary Fill | `solid.boundary_fill` | SOLID › CREATE |
| Bounding Solid | `solid.bounding_solid` | SOLID › CREATE |
| Box | `solid.box` | SOLID › CREATE |
| Chamfer | `solid.chamfer` | SOLID › MODIFY |
| Coil | `solid.coil` | SOLID › CREATE |
| Combine | `solid.combine` | SOLID › MODIFY |
| Cylinder | `solid.cylinder` | SOLID › CREATE |
| Draft | `solid.draft` | SOLID › MODIFY |
| Emboss | `solid.emboss` | SOLID › CREATE |
| Extrude (E) | `solid.extrude` | SOLID › CREATE |
| Fillet (F) | `solid.fillet` | SOLID › MODIFY |
| Hole (H) | `solid.hole` | SOLID › CREATE |
| Loft | `solid.loft` | SOLID › CREATE |
| Mirror | `solid.mirror` | SOLID › CREATE |
| Move/Copy (M) | `solid.move` | SOLID › MODIFY |
| Offset Face | `solid.offset_face` | SOLID › MODIFY |
| Circular Pattern | `solid.pattern.circular` | SOLID › CREATE |
| Pattern on Path | `solid.pattern.path` | SOLID › CREATE |
| Rectangular Pattern | `solid.pattern.rectangular` | SOLID › CREATE |
| Pipe | `solid.pipe` | SOLID › CREATE |
| Press Pull (Q) | `solid.press_pull` | SOLID › MODIFY |
| Remove | `solid.remove` | SOLID › MODIFY |
| Replace Face | `solid.replace_face` | SOLID › MODIFY |
| Revolve | `solid.revolve` | SOLID › CREATE |
| Rib | `solid.rib` | SOLID › CREATE |
| Scale | `solid.scale` | SOLID › MODIFY |
| Shell | `solid.shell` | SOLID › MODIFY |
| Sphere | `solid.sphere` | SOLID › CREATE |
| Split Body | `solid.split_body` | SOLID › MODIFY |
| Split Face | `solid.split_face` | SOLID › MODIFY |
| Sweep | `solid.sweep` | SOLID › CREATE |
| Thread | `solid.thread` | SOLID › CREATE |
| Torus | `solid.torus` | SOLID › CREATE |
| Web | `solid.web` | SOLID › CREATE |
## Surfaces
| Command | Id | Toolbar |
|---|---|---|
| Blend Surface | `surface.blend` | SURFACE › CREATE |
| Boundary Surface | `surface.boundary` | SURFACE › CREATE |
| Extend | `surface.extend` | SURFACE › MODIFY |
| Surface Extrude | `surface.extrude` | SURFACE › CREATE |
| Fair Surface | `surface.fair` | SURFACE › MODIFY |
| Surface Fillet *(planned: [#769](https://github.com/bherbruck/solidcraft/issues/769))* | `surface.fillet` | SURFACE › MODIFY |
| Surface Loft | `surface.loft` | SURFACE › CREATE |
| Match Surface | `surface.match` | SURFACE › MODIFY |
| Offset Surface | `surface.offset` | SURFACE › CREATE |
| Patch | `surface.patch` | SURFACE › CREATE |
| Reverse Normal | `surface.reverse_normal` | SURFACE › MODIFY |
| Surface Revolve | `surface.revolve` | SURFACE › CREATE |
| Ruled Surface | `surface.ruled` | SURFACE › CREATE |
| Stitch | `surface.stitch` | SURFACE › MODIFY |
| Surface Sweep | `surface.sweep` | SURFACE › CREATE |
| Thicken | `surface.thicken` | SURFACE › CREATE |
| Trim | `surface.trim` | SURFACE › MODIFY |
| Unstitch | `surface.unstitch` | SURFACE › MODIFY |
| Untrim | `surface.untrim` | SURFACE › MODIFY |
## Construction geometry
| Command | Id | Toolbar |
|---|---|---|
| Axis Through Edge | `construct.axis.edge` | SOLID › CONSTRUCT |
| Axis Perpendicular To Face | `construct.axis.normal_to_face` | SOLID › CONSTRUCT |
| Axis Through Cylinder/Cone/Torus | `construct.axis.through_cylinder` | SOLID › CONSTRUCT |
| Axis Through Two Planes | `construct.axis.two_planes` | SOLID › CONSTRUCT |
| Axis Through Two Points | `construct.axis.two_points` | SOLID › CONSTRUCT |
| Plane Along Path | `construct.plane.along_path` | SOLID › CONSTRUCT |
| Plane at Angle | `construct.plane.at_angle` | SOLID › CONSTRUCT |
| Midplane | `construct.plane.midplane` | SOLID › CONSTRUCT |
| Offset Plane | `construct.plane.offset` | SOLID › CONSTRUCT |
| Perpendicular Plane | `construct.plane.perpendicular` | SOLID › CONSTRUCT |
| Tangent Plane | `construct.plane.tangent` | SOLID › CONSTRUCT |
| Plane Through Three Points | `construct.plane.three_points` | SOLID › CONSTRUCT |
| Plane Through Two Edges | `construct.plane.two_edges` | SOLID › CONSTRUCT |
| Point Along Path | `construct.point.along_path` | SOLID › CONSTRUCT |
| Point At Center Of Circle/Sphere/Torus | `construct.point.center` | SOLID › CONSTRUCT |
| Point At Edge And Plane | `construct.point.edge_plane` | SOLID › CONSTRUCT |
| Point Through Three Planes | `construct.point.three_planes` | SOLID › CONSTRUCT |
| Point Through Two Edges | `construct.point.two_edges` | SOLID › CONSTRUCT |
| Point At Vertex | `construct.point.vertex` | SOLID › CONSTRUCT |
## Sheet metal
| Command | Id | Toolbar |
|---|---|---|
| Convert to Sheet Metal | `sheet.convert` | SHEET METAL › CREATE |
| Export Bend Table | `sheet.export_bend_table` | – |
| Export Flat Pattern as DXF | `sheet.export_dxf` | – |
| Flange | `sheet.flange` | SHEET METAL › CREATE |
| Create Flat Pattern | `sheet.flat_pattern` | SHEET METAL › CREATE |
| Fold | `sheet.fold` | SHEET METAL › CREATE |
| Hem | `sheet.hem` | SHEET METAL › CREATE |
| Sheet Metal Rules | `sheet.manage_rules` | SHEET METAL › MODIFY |
| Perforate | `sheet.perforate` | SHEET METAL › CREATE |
| Refold | `sheet.refold` | SHEET METAL › MODIFY |
| List Sheet Metal Rules | `sheet.rules` | – |
| Unfold | `sheet.unfold` | SHEET METAL › MODIFY |
## Plastic parts
| Command | Id | Toolbar |
|---|---|---|
| Assign Plastic Rule | `plastic.assign_rule` | PLASTIC › SETUP |
| Boss | `plastic.boss` | PLASTIC › CREATE |
| Lip | `plastic.lip` | PLASTIC › CREATE |
| Manage Plastic Rules | `plastic.manage_rules` | PLASTIC › SETUP |
| Rest | `plastic.rest` | PLASTIC › CREATE |
| List Plastic Rules | `plastic.rules` | – |
| Snap Fit | `plastic.snap_fit` | PLASTIC › CREATE |
## Components
| Command | Id | Toolbar |
|---|---|---|
| Activate Component | `component.activate` | – |
| Break Link | `component.break_link` | – |
| Capture Position | `component.capture_position` | SOLID › POSITION |
| Find Identical Copies | `component.copies` | – |
| New Component | `component.create` | SOLID › ASSEMBLE |
| Delete Component | `component.delete` | – |
| Extract to File | `component.extract` | – |
| Create Components from Bodies | `component.from_bodies` | – |
| Insert Design | `component.insert_design` | SOLID › ASSEMBLE |
| List Links | `component.links` | – |
| List Components | `component.list` | – |
| Part Properties | `component.metadata` | – |
| Change Part Properties | `component.metadata.set` | – |
| Move Bodies to Component | `component.move_bodies` | – |
| Move Sketches to Component | `component.move_sketches` | – |
| Paste New | `component.paste_new` | – |
| Component Physical Properties | `component.properties` | – |
| Relink Source | `component.relink` | – |
| Rename Component | `component.rename` | – |
| Replace with Link | `component.replace_with_link` | – |
| Revert Position | `component.revert_position` | SOLID › POSITION |
| Unlock Contents | `component.unlock` | – |
| Update Links | `component.update_links` | – |
## Assembly joints
| Command | Id | Toolbar |
|---|---|---|
| As-Built Joint | `joint.as_built` | SOLID › ASSEMBLE |
| Cam | `joint.cam` | SOLID › ASSEMBLE |
| Joint (J) | `joint.create` | SOLID › ASSEMBLE |
| Delete Joint | `joint.delete` | – |
| Drive Joints | `joint.drive` | SOLID › ASSEMBLE |
| Edit Joint | `joint.edit` | – |
| Gear | `joint.gear` | SOLID › ASSEMBLE |
| Inspect Joint | `joint.inspect` | – |
| Joint Limits | `joint.limits` | – |
| List Joints | `joint.list` | – |
| Motion Link | `joint.motion_link` | SOLID › ASSEMBLE |
| Joint Origin | `joint.origin` | SOLID › CREATE |
| Rack and Pinion | `joint.rack_pinion` | SOLID › ASSEMBLE |
| Reach Point | `joint.reach` | – |
| Rigid Group | `joint.rigid_group` | SOLID › ASSEMBLE |
| Screw | `joint.screw` | SOLID › ASSEMBLE |
| Solve Joints | `joint.solve` | – |
| Sweep Joint | `joint.sweep` | – |
## Configurations
| Command | Id | Toolbar |
|---|---|---|
| Activate Configuration | `config.activate` | – |
| Configuration Column | `config.column` | – |
| Configure | `config.configure` | SOLID › CONFIGURE |
| Preview Configuration | `config.preview` | – |
| Configuration Row | `config.row` | – |
| Configuration Rule | `config.rule` | – |
| Configuration Rules | `config.rules` | – |
| Display Configuration Table | `config.table` | SOLID › CONFIGURE |
## Timeline
| Command | Id | Toolbar |
|---|---|---|
| Add Recorded Feature | `timeline.add` | – |
| Compute All | `timeline.compute_all` | SOLID › MODIFY |
| Copy Features | `timeline.copy` | – |
| Delete (Delete) | `timeline.delete` | SOLID › MODIFY |
| Feature Dependents | `timeline.dependents` | – |
| Edit Feature | `timeline.edit` | – |
| Export Command Script | `timeline.export_script` | – |
| New Feature Folder | `timeline.group` | – |
| Inspect Feature | `timeline.inspect` | – |
| Move Timeline Items | `timeline.move_many` | – |
| Move Features to Folder | `timeline.move_to_group` | – |
| Paste Features | `timeline.paste` | – |
| Edit Feature | `timeline.redefine` | – |
| Rename | `timeline.rename` | – |
| Rename Feature Folder | `timeline.rename_group` | – |
| Reorder Feature | `timeline.reorder` | – |
| Reorder Features | `timeline.reorder_many` | – |
| Roll History Marker | `timeline.roll_to` | – |
| Move Timeline Marker | `timeline.rollback` | – |
| Suppress Feature | `timeline.suppress` | – |
| Remove Feature Folders | `timeline.ungroup` | – |
## Inspect
| Command | Id | Toolbar |
|---|---|---|
| Accessibility Analysis | `inspect.accessibility` | SKETCH › INSPECT |
| Center of Mass | `inspect.center_of_mass` | SKETCH › INSPECT |
| Clearance | `inspect.clearance` | – |
| Compare Bodies | `inspect.compare` | – |
| Continuity Analysis | `inspect.continuity` | SURFACE › INSPECT |
| Curvature Comb Analysis | `inspect.curvature_comb` | SKETCH › INSPECT |
| Curvature Map Analysis | `inspect.curvature_map` | SKETCH › INSPECT |
| Draft Analysis | `inspect.draft` | SKETCH › INSPECT |
| Environment Map Analysis | `inspect.environment_map` | SKETCH › INSPECT |
| Interference | `inspect.interference` | SOLID › INSPECT |
| Isocurve Analysis | `inspect.isocurve` | SKETCH › INSPECT |
| Measure (I) | `inspect.measure` | SOLID › INSPECT |
| Minimum Radius Analysis | `inspect.minimum_radius` | SKETCH › INSPECT |
| Section Analysis | `inspect.section` | SOLID › INSPECT |
| Silhouette | `inspect.silhouette` | – |
| Zebra Analysis | `inspect.zebra` | SKETCH › INSPECT |
## Files
| Command | Id | Toolbar |
|---|---|---|
| Export | `file.export` | – |
| Export Current View as DXF | `file.export_view_dxf` | – |
| Insert Mesh | `file.insert_mesh` | SOLID › INSERT |
| Insert STEP | `file.insert_step` | SOLID › INSERT |
| New Design (Ctrl+N) | `file.new` | – |
| Save (Ctrl+S) | `file.save` | – |
| Save As | `file.save_as` | – |
| Save As Mesh | `file.save_mesh` | INSERT › FILES |
| Installed Slicers | `file.slicers` | – |
## Documents
| Command | Id | Toolbar |
|---|---|---|
| Open (Ctrl+O) | `doc.open` | – |
| Recover Design | `doc.recover` | – |
| Discard Recovered Design | `doc.recovery_discard` | – |
| Recoverable Designs | `doc.recovery_list` | – |
## Edit
| Command | Id | Toolbar |
|---|---|---|
| Checkpoint | `edit.checkpoint` | – |
| Redo (Ctrl+Y) | `edit.redo` | – |
| Restore Checkpoint | `edit.restore_checkpoint` | – |
| Undo (Ctrl+Z) | `edit.undo` | – |
## `appearance.*`
| Command | Id | Toolbar |
|---|---|---|
| Appearance (A) | `appearance.assign` | SOLID › MODIFY |
| Appearance Library | `appearance.library` | – |
| List Appearances | `appearance.list` | – |
## `assembly.*`
| Command | Id | Toolbar |
|---|---|---|
| Bill of Materials | `assembly.bom` | SOLID › INSPECT |
## `body.*`
| Command | Id | Toolbar |
|---|---|---|
| Rename Body | `body.rename` | – |
## `browser.*`
| Command | Id | Toolbar |
|---|---|---|
| New Group | `browser.group` | – |
| Move Browser Items | `browser.move` | – |
| Order Browser Items | `browser.order` | – |
| Rename Group | `browser.rename_group` | – |
| Ungroup | `browser.ungroup` | – |
| Show/Hide | `browser.visibility` | – |
## `canvas.*`
| Command | Id | Toolbar |
|---|---|---|
| Calibrate Canvas | `canvas.calibrate` | – |
| Decal | `canvas.decal` | SKETCH › INSERT |
| Delete Canvas | `canvas.delete` | – |
| Edit Canvas | `canvas.edit` | SKETCH › INSERT |
| Canvas | `canvas.insert` | SKETCH › INSERT |
## `contact.*`
| Command | Id | Toolbar |
|---|---|---|
| Check Contact | `contact.check` | – |
| New Contact Set | `contact.create` | SOLID › ASSEMBLE |
| Disable Contact | `contact.disable_all` | SOLID › ASSEMBLE |
| Edit Contact Set | `contact.edit` | – |
| Enable All Contact | `contact.enable_all` | SOLID › ASSEMBLE |
| Enable Contact Sets | `contact.enable_sets` | SOLID › ASSEMBLE |
| List Contact Sets | `contact.list` | – |
## `diagnostics.*`
| Command | Id | Toolbar |
|---|---|---|
| Crash Report | `diagnostics.crash_report` | – |
| Crash Reports | `diagnostics.crash_reports` | – |
| Delete Crash Reports | `diagnostics.crash_reports.clear` | – |
| Crash Test | `diagnostics.crash_test` | – |
## `document.*`
| Command | Id | Toolbar |
|---|---|---|
| Inspect Design | `document.inspect` | – |
| Design Properties | `document.metadata` | – |
| Remove Design Property | `document.metadata.remove` | – |
| Change Design Properties | `document.metadata.set` | – |
| Change Design Units | `document.units` | – |
## `engine.*`
| Command | Id | Toolbar |
|---|---|---|
| List Commands | `engine.commands` | – |
| Describe Command | `engine.describe` | – |
## `explode.*`
| Command | Id | Toolbar |
|---|---|---|
| Exploded View | `explode.create` | SOLID › ASSEMBLE |
| Delete Exploded View | `explode.delete` | – |
| List Exploded Views | `explode.list` | – |
| Show Exploded View | `explode.show` | – |
## `expr.*`
| Command | Id | Toolbar |
|---|---|---|
| Evaluate Expression | `expr.evaluate` | – |
## `face.*`
| Command | Id | Toolbar |
|---|---|---|
| Delete Face | `face.delete` | SOLID › MODIFY |
## `library.*`
| Command | Id | Toolbar |
|---|---|---|
| Apply Local Library Entry | `library.apply` | – |
| Export Design Library | `library.export` | – |
| Inspect Local Library | `library.inspect` | – |
## `material.*`
| Command | Id | Toolbar |
|---|---|---|
| Physical Material | `material.assign` | SOLID › MODIFY |
| New Physical Material | `material.create` | – |
| Delete Physical Material | `material.delete` | – |
| Edit Physical Material | `material.edit` | – |
| List Materials | `material.list` | – |
| Directional Elastic Modulus | `material.properties.directional` | – |
| Validate Physical Material Data | `material.properties.validate` | – |
## `mesh.*`
| Command | Id | Toolbar |
|---|---|---|
| Convert Mesh | `mesh.convert` | – |
## `model.*`
| Command | Id | Toolbar |
|---|---|---|
| List Edges | `model.edges` | – |
| List Faces | `model.faces` | – |
| List Threads | `model.threads` | – |
## `motion.*`
| Command | Id | Toolbar |
|---|---|---|
| Delete Motion Study | `motion.delete` | – |
| Export Motion Study | `motion.export` | – |
| Export Motion Animation | `motion.export_animation` | – |
| Motion Interference | `motion.interference` | – |
| List Motion Studies | `motion.list` | – |
| Play Motion Study | `motion.play` | – |
| Plot Motion Study | `motion.plot` | – |
| Motion Study | `motion.study` | SOLID › ASSEMBLE |
| Motion Trace | `motion.trace` | SOLID › ASSEMBLE |
| Edit Motion Trace | `motion.trace.edit` | – |
| Keep Motion Trace | `motion.trace.keep` | – |
## `occurrence.*`
| Command | Id | Toolbar |
|---|---|---|
| Paste (Instance) | `occurrence.copy` | – |
| Ground | `occurrence.ground` | – |
| Move Occurrence | `occurrence.move` | – |
| Occurrence Physical Properties | `occurrence.properties` | – |
## `parameters.*`
| Command | Id | Toolbar |
|---|---|---|
| Add User Parameter | `parameters.add` | – |
| Change Parameters | `parameters.change` | SOLID › MODIFY |
| Comment Parameter | `parameters.comment` | – |
| Complete Expression | `parameters.complete` | – |
| Delete Parameter | `parameters.delete` | – |
| Export Parameters | `parameters.export` | – |
| Favourite Parameter | `parameters.favorite` | – |
| Parameter Graph | `parameters.graph` | – |
| Import Parameters | `parameters.import` | – |
| List Parameters | `parameters.list` | – |
| Move Parameter | `parameters.move` | – |
| Rename Parameter | `parameters.rename` | – |
| Parameter Users | `parameters.users` | – |
## `parts.*`
| Command | Id | Toolbar |
|---|---|---|
| Insert Fastener | `parts.fastener` | SOLID › INSERT |
| Insert Part | `parts.insert` | – |
| Standard Parts | `parts.library` | – |
| Change Part Size | `parts.resize` | – |
## `render.*`
| Command | Id | Toolbar |
|---|---|---|
| Render Backends | `render.backends` | – |
| Cancel Render | `render.cancel` | – |
| Export Render Image | `render.export` | – |
| Check Render Request | `render.preflight` | – |
| Inspect Render Scene | `render.scene` | RENDER › SCENE |
| Apply Render Camera | `render.settings.apply` | – |
| Render Settings | `render.settings.get` | – |
| Save Render Settings | `render.settings.set` | – |
| Render Image | `render.start` | RENDER › IMAGE |
| Render Progress | `render.status` | – |
## `select.*`
| Command | Id | Toolbar |
|---|---|---|
| Clear Selection | `select.clear` | – |
| Select | `select.set` | – |
## `selection.*`
| Command | Id | Toolbar |
|---|---|---|
| Delete | `selection.delete` | – |
## `view.*`
| Command | Id | Toolbar |
|---|---|---|
| Ambient Occlusion | `view.ambient_occlusion` | – |
| Restore Named View | `view.apply` | – |
| Delete Named View | `view.delete` | – |
| Graphics Preset | `view.graphics_preset` | – |
| History layout | `view.history_layout` | – |
| Workspace layout | `view.layout` | – |
| List Named Views | `view.list` | – |
| Navigate View | `view.navigate` | – |
| Normal to Selection | `view.normal_to` | – |
| Rename Named View | `view.rename` | – |
| New Named View | `view.save` | – |