Commit Graph
2229 Commits
Author SHA1 Message Date
The Nomad 1f6a2d4daf 3D mouse: driver choice, guided calibration, button mapping and a picture of the device (#1463) (#3825)
* Add a small test boat to steer around with the 3D mouse

A little hull in its own camera, drawn by the UI itself and not the CAD
viewport, so a 3D mouse can be tried out without opening a design. It
brings the model (generated by assets/models/make_test_boat.py) and the
tests for how the camera moves it.

Nothing uses it yet; Preferences picks it up with the rest of the 3D mouse
work.

* UI kit: keep a choice row from flipping with the scrollbar

A choice row picks segments or a dropdown by whether its labels fit. A page
scrollbar that comes and goes narrows the row by its own width, so the row
could flip back and forth between the two on a page that sits right at the
edge. It is now judged on the whole row and through a small helper,
fits_steadily, that only changes its answer once the miss is wider than the
scrollbar.

Also tests for that, for typed numbers in a slider's value box, and a
test hook to put up the issue-report input barrier by hand.

* 3D mouse: device model, guided calibration, buttons and a picture

The 3D mouse becomes a device we know something about instead of six raw
numbers.

The reader picks between spacenavd and the direct hidraw driver, falls back
from one to the other, and says so when it can't open the device. Guided
calibration asks whether the device is a spring cap or a trackball, adds a
touch step, and uses a settle filter so a ball let go of stops reading as
motion. Buttons get jobs (keys, held modifiers, commands), saved per
device, with defaults for the SpaceMouse Pro.

Preferences gets a picture of the device that moves as it does, next to the
test boat, and the same picture can sit in the 3D view at Left Viewport,
Right Viewport or Left Window, above the floating History card like the
legend and readouts.

These ride together because the crate's calibration types, the Preferences
page, the Linux reader and the button hook all use each other.

* 3D mouse: offer to calibrate an uncalibrated device

When a 3D mouse shows up that has not been calibrated, a card in the 3D
view offers to calibrate it, to swap drivers when the other one would work
better, to close, or to never ask again. It is made once per device, goes
away after 30 seconds in view, and gives way to a status or computing
toast instead of stacking on it.

The card is the shared toast, which now takes buttons: they group by
purpose, wrap inside the card at narrow widths, and do nothing while an
issue report holds CAD input. The picture of the device in the 3D view
keeps clear of the card.

* 3D mouse: translations and attribution

The 3D mouse strings (ui.3d_mouse_*, the calibration steps and the offer
card) in every shipped language, the Japanese catalog note, and the credit
for the test boat model in ATTRIBUTION.md.

This is last because the code before it only looks keys up: it builds and
runs without these, falling back to English until they land.

* 3D mouse: draw its preferences with the settings kit like the rest of Navigation

The 3D mouse section was a folded header with its own layout. It now
uses the same kit as the sections above it: a settings_section card,
settings_form rows with the shared label column, dividers between the
device, axes, picture and buttons groups, Text::Hint for the helper
lines, and settings_control_width for the dropdowns.

The section is open like every other one (the header still folds it),
so the device badge on the folded header is gone; the calibration row
already names the device. Every setting, string and key is unchanged.
Tests that unfolded the section no longer click it, and the hint lines
are looked up as hints instead of notes.

* 3D mouse: show each axis's live tilt in Preferences, like main's axis rows

Each view axis row is main's axis row again: a meter that follows the tilt of the motion driving it, with the dead zone marked, next to Invert, Speed and the "driven by" menu. The meter reads the calibrated travel when the device has a calibration and the raw reading over full scale when it does not, and asks for a frame whenever the reading changes. The helpers are back as they are on main, and the calibration state is a badge by the enable toggle.

* 3D mouse: line its preferences up with the rest of Navigation

- The two checkboxes sit side by side in the same two-column grid as Wheel and trackpad.
- Row labels stop repeating "3D mouse" and use sentence case: Calibration, Driver, Restore defaults, Reset view, Left viewport, Right viewport, Left window.
- Hints line up under the control column instead of the left edge.
- The six view axes are named Pan X, Pan Y, Zoom, Orbit X, Orbit Y and Roll so they fit the name column.
- Buttons are a divider and rows in a form like the other groups, without the bold sub-heading.
- The driver, dead zone, axes, picture and buttons sit behind a collapsed Advanced section, since most people never touch them.

* 3D mouse: tidy the Advanced test for clippy
2026-10-24 03:34:21 +00:00
SS-ENandClaude Opus 5.5 6c6ffe4802 MCP: wait out long requests, honest batch outcomes, batch tool aliases (#2901)
Rebased onto main as one commit (was 120d26f7, df488f9a, db9d1073 plus
merges of main).

- A request the app reports as still running (#1618) is waited for on the
  same connection through `control.pending`; past the wait the error says it
  was not cancelled and will still apply (or only write its file), later calls
  are not sent behind it, and the new read-only `pending` tool returns its
  result once it lands.
- A failed batch says what really happened: `rolled_back` only when the
  design is back where the batch started (as #3288 / #3242 on main: the app's
  `rolled_back` is believed; for an older app, every completed step undone;
  only a rollback asked for is reported as one), plus `applied`, `not_run` and
  `failed.still_running`.
- A batch step may name a tool (set_parameter, list_commands,
  describe_command, execute, measure, inspect_design, undo, redo, export, save,
  open, new_design, crash_reports); screenshot, body_topology, batch and
  pending are refused before anything is sent.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 02:41:41 +00:00
github-actions[bot] 46fca160e1 Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] 2026-10-24 02:34:23 +00:00
rbousigues88andClaude Opus 5.5 16727f331c docs(mcp): Windows setup for Claude Desktop (#3794)
* docs(mcp): Windows setup for Claude Desktop (paths, two servers, Store config file)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs(mcp): say the Store build can keep the config elsewhere, not that the other path fails

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 01:40:56 +00:00
bherbruckandClaude Opus 5.5 01220d3eb5 Version 0.21.0 on main (released from rc.2's code) (#5774)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 01:05:06 +00:00
Colin Faulkingham 89c1f02850 Sketch slots: provide typed dimension inputs for every variant (#2423) (#4318)
* claim: #2423

* fix(sketch): add typed dimensions to every slot tool (#2423)
2026-10-24 00:59:27 +00:00
cronos 45edd5baf5 Fix midpoint picks in sketch dimensions (#4872)
Retain MID snaps across both picks and materialize reusable midpoint
constraints for point-to-line and point-to-point dimensions. Let midpoint
pairs choose horizontal or vertical spans with pointer placement before
entering a value.

Cover projected model edges, overlapping geometry, helper reuse,
undo/cancel/reopen, and existing angular and line-circle workflows.
2026-10-24 00:58:56 +00:00
Colin Faulkingham 7dd5baac5c Browser: route body picks into open command dialogs (#2560) (#4371)
* claim: #2560

* fix(ui): route Browser body picks into active dialogs
2026-10-24 00:52:31 +00:00
Colin Faulkingham 2e5924ed5e Preserve construction references when axes and points are renamed (#4419) (#4449)
* claim: #4419

* fix: preserve renamed construction references (#4419)
2026-10-24 00:24:51 +00:00
Kai Evans a199a2cc25 Section Analysis: OK with no plane picked turns the section off (#2410) (#2411)
While a section is on, Section Analysis opened with no plane picked now
says "No plane picked: OK turns the section off." and OK runs
inspect.section {"clear": true}. With no section on, OK with no plane
still asks for a plane.

Fixes #2410.
2026-10-24 00:11:38 +00:00
Nathan Dane fb374b543b UI: integrate theme radii, borders, palettes and viewport refresh (#5045) (#5046)
* claim: #4922

* UI: let themes own corner radii

* UI: use four-point panel and window radii in SolidCraft 95

* UI: align the 95 radius assertion with four-point panels

* claim: #4953

* UI: let themes own structural and control borders

* UI: single Blueprint outlines and dotted secondary rules

* UI: separate container outlines and add theme-owned 95 bevels

* claim: #5007

* UI: apply theme palettes to icons, workspace tabs and Gruvbox settings

* claim: #5045

* Viewport: invalidate cached geometry colours when the theme palette changes

* UI: preserve legacy theme logo colours with the borderless mark
2026-10-23 23:57:34 +00:00
Karl Von Richter 0dffb206b1 Assembly: ground the first part; drag free joint chains (#2804) (#2805)
* assembly(feat): ground first parts and drag free joint chains

Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* assembly(fix): update movable fixtures for first-part grounding

Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* assembly(test): keep the motion-cost crank free

Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure.

Signed-off-by: Karl Von Richter<karl@embeint.com>

* assembly(test): free the frame placement fixture

Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main.

Signed-off-by: Karl Von Richter<karl@embeint.com>

---------

Signed-off-by: Karl Von Richter<karl@embeint.com>
2026-10-23 23:15:34 +00:00
Artem Sushchev 30b01e8d79 A spherical shell revolves into a solid with a void, and cuts and joins with hollow tools work (#451) (#4182) 2026-10-23 22:53:42 +00:00
1ed394f8d6 Extrude: picking a face, vertex or parallel plane off the profile switches the extent to To Object (#2855)
* Extrude: picking a face, vertex or parallel plane off the profile turns the extent to To Object

With profiles picked, a face off their plane (or curved), a vertex off it, or a
construction plane parallel to it is taken as the To Object target instead of
another profile: the extent switches without the Extent Type choice, and the
distance shows how far the target is. Coplanar faces still join the profiles.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Extrude: automatic To Object is a Preferences setting, off by default

Preferences > Design > "Extrude to a picked target" (`extrude_auto_to_object`, default
false) turns the automatic To Object on. Off, picks in the Extrude dialog only add
profiles and the distance is not synced to a target, as before this change.

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-23 22:03:23 +00:00
Homero Thompson d5a046c3d3 Agent chat: end the agent's process group where kill is busybox' (#4587) (#4588)
* claim: #4587

* Agent chat: end the agent's process group with the system call (#4587)

The group was signalled with a `kill` program: `kill -s TERM -- -<pgid>`.
That works with procps' `kill` and with BSD's, but busybox' `kill` takes no
`--`: it prints its usage, exits 1 and signals nothing. The agent's helpers
(the CLI an adapter wraps, the MCP servers it starts) then stay alive after
the agent is ended.

The group is signalled with the system call instead, so no `kill` program and
no shell are needed and the behaviour is the same everywhere. `nix` (MIT) is
already in the tree through zip, and only on Unix: the browser build does not
take it.

The two tests that cover this now pass where they failed before:
`agent_chat::process::tests::dropping_the_process_ends_its_group` and
`agent_chat::process::tests::stopping_the_agent_leaves_no_helpers_running`.
2026-10-23 21:25:09 +00:00
raykholo 4353f34bd1 Delete removes a selected construction axis (#4692) (#4695)
* claim: #4692

* Delete removes a selected construction axis (#4692)

Delete on a construction axis skipped it with "the origin axes can't be
deleted". It now deletes the construction axis feature, like construction
planes; the origin axes X, Y and Z are still refused.
2026-10-23 21:25:02 +00:00
Colin Faulkingham 71f7a8e697 Move: scope box selection to the active component (#4459) (#4527)
* claim: #4459

* fix: scope Move box selection to active component (#4459)
2026-10-23 20:25:00 +00:00
ealittandClaude Sonnet 5.5 6eaf723041 fix(ui): preview shortcut chords and wait for complete modifier input (#1810)
Keep physical modifier events out of the ordinary-key slot, preview held keys immediately, and confirm after release and a one-second settling interval. Preserve legacy control-channel modifier behavior while allowing explicit physical Control/Command input. Add regression coverage, a UI scenario, localized guidance and documentation.

Fixes #1809.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-23 20:05:58 +00:00
raykholo bb155d446a Tests: moving an occurrence recomputes only the cuts and joins it touches (#4965) (#4982)
* claim: #4965

* Joins and cuts follow only the placements they depend on (#4965)

Tests that turning a joint between parts cuts no hole again, and that a
tool cutting another part cuts again when that part moves relative to it,
while an unrelated part moving keeps the result.

Booleans and Combine now hash only the placements of the bodies they take
as inputs, relative to the frame that evaluates them (#3397), so these
pin that behaviour for joins and cuts with named targets across parts.
2026-10-23 17:22:24 +00:00
bherbruckandClaude Sonnet 5.5 98c4f335e8 Control channel and MCP on by default, with a setting to turn it off (#5561)
The app opens its localhost control channel on port 27878 (or the next free
one) unless Preferences > Assistant turns it off; --control and
SOLIDCRAFT_CONTROL_PORT still win. A current.port discovery file lets
solidcraft-cli mcp find the running app with no arguments.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-23 16:00:35 +00:00
ahmetalpcelikandClaude Opus 5.5 4bdeaacde6 Crash reports: keep component.activate in the journal (#5079) (#5121)
* claim: #5079

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Crash journal keeps component.activate (#5079)

Activating a component changes only the session's active component and
occurrence path, not the design, so the journal dropped the command and a
crash report's replay built later parts under the previously active
component. The journal now also keeps a command that changes either.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 15:35:54 +00:00
raykholo e5dffc7052 Flatpak: find the host's fonts for CJK text and the font list (#5124) (#5127)
* claim: #5124

* Flatpak: find the host's fonts for CJK text and the font list (#5124)

Inside the Flatpak sandbox the host's fonts are mounted at /run/host/fonts
and /run/host/user-fonts, which no font search looked at. Japanese and
Chinese text fell back to boxes, and the font list missed the host's
families.

- Search both folders for the CJK and Chinese fallbacks and for the
  installed-font list.
- The CJK fallback reads SOLIDCRAFT_FONT_DIRS (a path list, as the font
  list already does), with CRAFT_FONTS_DIR kept as a fallback.
2026-10-23 15:18:58 +00:00
Thodoris Tsagkogeorgas 43fa25458d Line tool snaps a diameter through the circle centre (#4326) (#4327)
A line drawn across a circle only snapped its end onto the curve, so a
diameter could miss the centre at any angle. Near the centre the line now
locks onto the radial line: on the rim it stays on the circle and the centre
is kept on the line, and on the centre point the end lands there.
2026-10-23 14:55:39 +00:00
9b8fa3d357 Browser: a body picked in the viewport is opened to and scrolled to (#3005) (#3081)
* claim: #3005

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Browser: a body picked in the viewport is shown in the Browser (#3005)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Merge main; viewport::select takes a toggle flag now

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:48:11 +00:00
raykholo 755ad9af07 Dragging a part along its joint no longer highlights what's under the pointer (#5137) (#5140)
* claim: #5137

* Dragging a part along its joint no longer highlights what's under the pointer (#5137)

The viewport's hover pick was skipped during a box selection and camera
moves, but not while a jointed part was dragged, so faces and edges under
the pointer lit up on every frame of the drag. The pick now waits until
the joint drag ends.
2026-10-23 14:45:45 +00:00
Christian Svensson 46aa3d5d47 STEP import: let a cancelled import release the import slot (#3171) (#3189)
* claim: #3171

* Release cancelled file import slots (#3171)
2026-10-23 14:31:51 +00:00
rlartotandClaude Sonnet 5.5 125b8d5387 Return to the originating tab after finishing a sketch (#3250) (#3264)
* claim: #3250

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Return to the originating toolbar tab after finishing a sketch (#3250)

A sketch started from SHEET METAL or PLASTIC always ended on the SOLID
tab. Remember the tab that was active when the sketch began
(UiState::sketch_return_tab, not saved) and go back to it when the
sketch ends. Falls back to SOLID when that is not one of the normal
toolbar tabs. A sketch started from SOLID behaves as before.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Test: no one-element loop in the return-tab test (clippy single_element_loop)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-23 14:31:48 +00:00
b5edd98bc9 Parameter import and image pickers offer their own file types (#3216) (#3314)
* claim: #3216

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Parameter import and canvas image pickers offer their file types (#3216)

Both opened the picker with no file type of their own, so it listed only
designs, CAD files and meshes (and All files). macOS lets you pick only
the types a filter names: CSV parameters, and PNG or JPEG images for a
canvas, were greyed out. They now ask for csv/json and png/jpg/jpeg,
which the picker lists first (#1801).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:31:46 +00:00
Victor Santos Oliveira 647a52d0fb Close Change Parameters with Escape (#3372) (#3399)
* claim: #3372

* Fix Escape cancellation in Change Parameters

Consume Escape before parameter editors can commit pending text on focus loss, while preserving autocomplete and shortcut capture priority. Add 11 UI regressions covering draft cancellation, preview cleanup, document and history preservation, and reopening saved values.
2026-10-23 14:31:42 +00:00
github-actions[bot] 8c977131d9 Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] 2026-10-24 00:20:18 +00:00
AhmetVandAhmetV 30a1fe74ca Viewport: right-click keeps a multi-selection of faces and edges (#3733) (#3788)
* claim: #3733

* Viewport: right-click keeps a multi-selection of faces and edges (#3733)

---------

Co-authored-by: AhmetV <344941595+ahmetv10@users.noreply.github.com>
2026-10-23 14:31:30 +00:00
fa2c1c31f6 3MF import: name a Bambu Studio project's bodies after its objects (#3858) (#3859)
* claim: #3858 (3MF import: names from a Bambu Studio project)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 3MF import: name a Bambu Studio project's bodies after its objects (#3858)

Bambu Studio leaves the name off the root model's objects and keeps it in
Metadata/model_settings.config (<config><object id="N"><metadata key="name">),
so every object of a project came in as Mesh1, Mesh2, ... A build item whose
root object has no name of its own now takes the object's name from those
settings. A name in the model still comes first, and part names, other
settings and objects of other model parts are left alone.

The settings are read only when a body needs a name, within what the model
parts left of the 1 GB budget. Settings that can't be read (malformed, nested
too deeply, too large) never fail the import: the bodies keep the generic
names, with a warning saying why.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:31:27 +00:00
leValdemar19andClaude Opus 5.5 7e472bc4da Cancel Sketch: leave a sketch without keeping its changes (#3838) (#3938)
* claim: #3838

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Cancel Sketch: leave a sketch without keeping its changes (#3838)

sketch.cancel (Cancel Sketch, ribbon Exit group and the sketch's
right-click menu) puts the design back as it was when the open sketch
was created or opened for editing: a new sketch is removed with its
dimension parameters, an edited one returns to how it was. It is one
undo step, so Undo goes back into the sketch.

The session remembers the design and the undo history at the point a
sketch is entered. Cancel uses that only while the history still runs
through it (the same steps before, every step since taken in this
sketch); otherwise it refuses and points to Undo, so a stale entry can
never throw away later work.

The icon is the approved close glyph in the sketch accent (alias
sketch_cancel); ja and zh carry the new label.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:31:22 +00:00
LoohiandClaude Sonnet 5.5 145c6ad60d Rigid joint saved with the wrong occurrence when two occurrences share a component (#3857) (#3939)
* claim: #3857

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Joint dialog: a body of a further instance picks that occurrence, not the component's first (#3857)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-23 14:31:20 +00:00
raykholo e1bf784014 Deleting an inserted file removes its components, placements and joints (#4100) (#4113)
* claim: #4100

* Deleting an inserted file removes its components, placements and joints (#4100)

A STEP or mesh file inserted into a design makes a component tree. Deleting
its feature left that tree behind: the components, their occurrences, the
rigid joints that hold them and the bodies' component assignments. A later
body that took an imported body's name was then placed in the stale component.

Document::remove_component_tree removes a component subtree and everything
that refers to it: the features made inside it, its occurrences, the joints
on them with their motion links, joint origins, contact set members, motion
study keys and exploded moves, body component and offset entries, standard
part and link records, and configuration columns. Deleting an inserted
file's feature and component.delete both use it; component.delete now also
removes joints left pointing at a deleted occurrence. The body transfer
refusal moves with it, unchanged.

* Only an inserted file's feature takes its component tree when deleted

Mark the feature a STEP, IGES or mesh insert makes (`inserted`), and remove
the component tree on delete only for those and for a linked design's
feature. Deleting a copied component's independent base deletes just that
feature, as before. Older designs get the mark as they open (pending format
change), except copied components' independent bases.
2026-10-23 14:31:08 +00:00
Colin Faulkingham 1bbc5ab0f7 Keep long Select Other labels inside the popup (#4209) (#4225)
* claim: #4209

* fix(ui): bound Select Other labels and expose full names (#4209)
2026-10-23 14:30:57 +00:00
raykholo c1e9d2f057 Esc ends the navigation bar's Pan, Orbit and Zoom modes (#4226) (#4233)
* claim: #4226

* Esc ends the navigation bar's Pan, Orbit and Zoom modes (#4226)

The nav bar toggled a mode on, but nothing cleared it on Esc, so a left drag
kept panning, orbiting or zooming. Esc now ends an active nav mode first;
the next Esc reaches the tool or dialog as before.
2026-10-23 14:30:54 +00:00
CaRLymxandcarlymx 68abb15d7f Spanish (es-ES): catch up with en.json (#4292)
Co-authored-by: carlymx <24634598+carlymx@users.noreply.github.com>
2026-10-23 14:30:51 +00:00
945e6261cc 3D mouse test: clear the frame's texture changes, so it passes in debug builds (#4382)
each_frame_hands_the_view_its_motion_through_the_drivers_mapping dropped
the output of a frame it ran (`let _ = ctx.run_ui(...)`). epaint panics
in debug builds when a TexturesDelta is dropped with deltas left ("Dropped
TexturesDelta with 1 unapplied deltas"), so the test failed under a plain
`cargo test` on every platform while the ci profile passed. It now clears
them, as the other UI tests do since #60.

Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:30:38 +00:00
raykholo d6b1608f9d "Don't Save" looks like a button in the Save changes prompt (#4380) (#4400)
* claim: #4380

* "Don't Save" looks like a button in the Save changes prompt (#4380)

The prompt's third action used the kit's low-emphasis text style, so it
didn't read as clickable and people thought Cancel was the only way out.
Add an opt-in secondary_left style to the confirm footer (a framed
secondary button from the theme tokens) and use it for Don't Save.

* Save prompt test: clear each frame's texture delta once it is applied

egui 0.36 panics when a TexturesDelta with unapplied deltas is dropped;
the test kept only the last frame's output and dropped the earlier ones.
2026-10-23 14:30:32 +00:00
raykholo 2d54cb31bc Flat Pattern view draws perforations (#4440) (#4441)
* claim: #4440

* Flat Pattern view: draw perforation holes (#4440)

The flat view drew the outline, cut-outs, pockets and bend lines but not
perforation fields, though the flat-pattern data and the DXF export list
their holes. The view now reads the hole centres from the sheet through
SheetBody::perforation_holes, caches them per model state and body, and
draws them as circles in the cut-out style. Holes outside the viewport or
smaller than one pixel are skipped, and the cache is capped at one million
holes.
2026-10-23 14:30:27 +00:00
FrankandClaude Opus 5.5 3acb81964a Sketch offset keeps its source lines free to turn (#4464) (#4466)
* claim: #4464

* Sketch offset keeps its source lines free to turn (#4464)

An offset adds a Parallel between each source line and its offset line.
Since offsets became associative, the offset's points are held during a
solve, so each Parallel pinned its source line to the offset line's
current direction: a closed chain lost its turning freedom (8 degrees of
freedom became 6), and Horizontal or an angle edit on a source line was
refused as conflicting.

The solver and the constructive reading now leave out a Parallel that
ties an offset line to the source it follows while the association lives;
the association already keeps them parallel. After Break the stored
Parallel drives again.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:30:21 +00:00
raykholo 4e7bf2b63a Toolbar: a constraint dragged out of the small box becomes a full button (#5254) (#5456)
* claim: #5254

* Toolbar: a constraint dragged out of the small box becomes a full button (#5254)

The Constrain panel's small box of constraint icons was a fixed list, so
dragging one onto the full-size buttons saved a new order but it was still
drawn in the box. The toolbar settings now remember, per tab, which box
commands were moved out; those are drawn as full buttons, the box closes
up, and dropping one back on a box icon returns it. Reset Toolbar restores
the default box, and settings saved before this load unchanged.
2026-10-23 14:28:23 +00:00
3093ce1d87 Renaming a body keeps the evaluated timeline, off the window thread (#2467) (#2468)
* Renaming a body that later features change evaluates nothing (#2467)

Model::rename_body now keeps the results when later features change the
body (a pattern, a chamfer, a join). It still evaluates when a body of
that name comes and goes or isn't the same body throughout, when a later
body's name is worked out from it (X (2)), or when a message quotes it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Rename box: rename off the window thread, and locked bodies follow a rename (#2467)

The rename box commits body.rename through run_heavy, so a rename that
still evaluates later features (one names the body in its targets)
computes beside the window instead of freezing it. Locked bodies now
follow a body.rename from anywhere (the rename box, the control channel,
scripts), not only the rename box.

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:23:13 +00:00
ca9dd02201 Reorder design tabs by dragging them (#3187) (#3188)
* claim: #3187

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Reorder design tabs by dragging them (#3187)

A tab dragged along the strip follows the pointer while the others make
room, and lands where it is released; Escape, or releasing down the
window, leaves the order as it was. With the custom title bar a drag that
starts mostly up or down (or on the only tab) still moves the window.
The control channel's ui.documents gains a move action (from, to).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:23:04 +00:00
raykholo 1d9bdb1ca3 FreeCAD/Rhino import: decode caps with room for detailed parts (#1783) (#3209)
* claim: #1783

* FreeCAD/Rhino import: decode caps with room for detailed parts (#1783)

cadmpeg decoded FreeCAD and Rhino files under its service profile, whose
million collection items and 2.56e8 work units a detailed part (a sprocket,
a threaded rod, a part with a few hundred faces) runs past: the import was
refused with "resource limit on CollectionItems: BudgetExceeded". Allow
8 million items and 2e9 work units, half of cadmpeg's desktop profile; the
input-size cap stays SolidCraft's STEP limit and every other cap stays at
the service profile's.

decoding_is_capped checks the two raised caps (and that they stay below the
desktop profile's) and that every other cap is still the service one.

Fixes #1783
2026-10-23 14:23:02 +00:00
github-actions[bot] d78494e016 Regenerate THIRD-PARTY-LICENSES.txt and docs/features.md [skip ci] 2026-10-23 22:44:53 +00:00
d18cc0df4e 2-point circle takes a typed diameter (#3278) (#3335)
* claim: #3278

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* 2-point circle takes a typed diameter (#3278)

After its first point the 2-point circle tool showed no value box, so the
circle could only be sized with the cursor. It now shows a Diameter box,
like the centre circle: the typed value puts the second point that far
along the cursor's direction, and Enter draws the circle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:22:59 +00:00
Peppe BergqvistandGitHub Copilot 04dc68d988 macOS: Fusion navigation preset does not support Shift + two-finger orbit (#3446)
* Macos: keep touchpad/key modifiers true to fusion

* fix: remove obsolete orbit snap reset from trackpad navigation

Upstream removed ViewportState::orbit_snap. The new trackpad orbit path retained one reference, causing E0609 in the PR merge build.

Validation: all seven trackpad tests pass; cargo check -p solidcraft-ui-egui --all-targets passes on the exact failing CI merge 66a2791b with this fix applied; rustfmt and diff checks pass.

Co-Authored-By: GitHub Copilot <noreply@github.com>

* fix: retain Fusion trackpad help in refactored preferences

Preserve upstream's new preferences pages and apply the translated Fusion trackpad tooltip in prefs/navigation.rs.

Validation: cargo build -p solidcraft passed. Tests and full CI were not run, as requested.

Co-Authored-By: GitHub Copilot <noreply@github.com>

* style: format Fusion trackpad preferences tooltip

Apply rustfmt's required wrapping for the relocated tooltip. No behavior changes.

Validation: cargo fmt --all -- --check and git diff --check passed.

Co-Authored-By: GitHub Copilot <noreply@github.com>

---------

Co-authored-by: GitHub Copilot <noreply@github.com>
2026-10-23 14:22:57 +00:00
HiroKenEzandClaude Opus 5.5 efb45d7411 Delete in a rolled-back history warns about the features after the marker (#3471) (#3698)
* claim: #3471

* Delete in a rolled-back history warns about the features after the marker (#3471)

With the timeline rolled back, the checks a delete runs first (the
confirmation's "these features will fail", timeline.dependents and
selection.delete's would_fail) compared models evaluated only up to the
marker. Features after it, broken by the delete, were not listed, so their
error marks turned up only once the timeline moved to the end.

newly_broken_in_history evaluates both sides over the whole history when
either has a marker (on copies; the model and document are unchanged) and is
used by the delete's report and by timeline.dependents.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 14:22:52 +00:00